Lorex LHWF1000 User Manual

DEVICE ID: xxxxxxxxxxxxx

DEVICE ID: xxxxxxxxxxxxx

STEP 1: Initial Setup

DEVICE ID: xxxxxxxxxxxxx

Before you begin, you will need to prepare the wire-free cameras and
Power Packs.

NOTE: Power Packs come fully charged with no need for initial charging.

HD Wire-Free Security System

GUIDE

1 / 2

English Version 1.0

Package Contents

Quick Connection Guide

www.lorex.com

* Per camera in multi-camera packs

OR

HD Wire-Free Security Cameras

(Model Number: LWB4800 / LWB5800 / LWB6800 Series)

To prepare the cameras:

LWB4800 Series LWB5800 / LWB6800 Series

1. Attach an antenna to each
camera. For LWB4800 Series
cameras, twist the adjustment
ring counterclockwise to
reposition each camera as shown
to the right. Twist clockwise to
tighten when finished.

Adjustment
ring

2. Peel off the PLEASE REMOVE
label covering the contacts on
each Power Pack. Insert the
charged Power Packs into each
camera base. Push up until the

Power Pack ‘clicks’ into place.

STEP 2: Setting Up the Recorder

Next, you must set up the recorder and connect it to your network.

To set up the recorder:

1. Connect the recorder to your router
using the included Ethernet cable.

2. Connect the included power adapter
to the recorder.

HD Recorder

(Model Number: LHWF1000 Series)

Camera Mounting Kit*

Dimensions

2.4”

60mm

LWB4800 Series

Rechargeable

Power Pack*

Recorder Power

Adapter

Camera Antenna*

Ethernet Cable

7.1”

180mm

LWB5800 / LWB6800 Series

USB Mouse

Power Pack

Adapter

187mm

7. 4 ”

Toolkit

HDMI Cable

OPTIONAL: Full Recorder Setup

• This guide describes basic setup of the recorder only. This
installation is intended for users who wish to monitor their
system using the free Lorex Cirrus app on their smartphone
or tablet.

• You may choose to use the recorder interface to control
your wire-free security system. Connect the included USB
mouse to one of the USB ports labelled Mouse / Backup, and
connect a monitor using the included HDMI cable. See the
included Quick Reference Guide for details.

STEP 3: Connecting with Lorex Cirrus

Connect to your system using the free Lorex Cirrus app for smartphones and
tablets (iOS and Android).

To connect with Lorex Cirrus:

1. Download and install the free Lorex Cirrus app from the
App Store or Google Play Store.

2. Tap the Lorex Cirrus icon to launch the app.

5.3”

130mm

2.9”

73mm

5.0”

126mm

5.5”

134mm

2.9”

73mm

Need Help?

Visit us online for up-to-date software and complete instruction manuals.

1

2

3

4

Visit lorex.com

Search for the model number

of your product

Click on your product in the

search results

Click on the Downloads tab

6.6”

168mm

3. Tap

4. Enter the following:

A

B

C

D

E

to open the menu. Tap Devices, then tap Add.

A

Ensure Device ID is selected.

F

Tap to scan the QR code on the back

B

of your recorder using the camera on
your mobile device.

Ensure the Client Port reads 35000.

C

Enter the username (default: admin).

D

Enter the password (default:

E

00000000).

F

Tap Save.

5. Enter a new, secure 8-15 character password. This password will be used
to connect to your system from now on.

Record your password below and store in a secure place:

6. Your cameras will appear on the Live screen of the app. Tap the play
button (

) to stream live video on channels that are in sleep mode.

Initial setup is now complete! Turn the guide over for instructions on
positioning and mounting the cameras.

As our products are subject to continuous improvement, Lorex reserves the right to modify product design,

Copyright © 2018 Lorex Corporation

specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.

LHWF1000_QCG_EN_R1

Installation Tips

Follow the tips below for more accurate motion detection and to optimize battery life:

• See images to the right for ideal setup. It is recommended
to place your camera at least 7ft (2.1m) above the ground
and angle it slightly downward toward the monitoring area,
excluding any busy areas (e.g., sidewalks or roadways).

• Ensure the camera image is free of obstructions (i.e., tree
branches).

• Position the camera no more than 20ft (6.1m) away from
the area you wish to monitor.

• See the “Optimizing Motion Detection” section to customize
motion settings for each camera on your system.

• Ensure you have configured the active area for motion
detection so that only areas of interest are selected. See
the “Optimizing Motion Detection” section for details.

• For best performance, position the camera so that objects
of interest will move from side-to-side across the camera
image, rather than moving towards or away from the
camera.

• Install the camera within range of the recorder (noted in the
camera’s specifications).

• This camera is weather resistant for outdoor use (IP66
rated). Installation in a sheltered location is recommended.

• Battery life will vary based on temperature, settings and number of events.

STEP 4: Installing the Cameras

Follow the instructions below to mount the cameras. It is recommended that
you refer to the “Installation Tips” section to help you select good mounting
locations.

To install your cameras:

1. Set the mounting bracket in the desired mounting position.
Mark holes through the mounting bracket (shown as
orange X’s on the right).

2. Drill holes where marked for the mounting screws using
the included drill bit (item C in toolkit)

Optimizing Motion Detection

Customize motion detection settings to ensure motion events are being recorded and
reduce false alarms.

To optimize motion detection:

1. Launch the Lorex Cirrus app.

2. Tap a channel in Live View to select it.

3. Tap

, then tap Motion.

4. Configure the following as needed:

a. Sensitivity: The amount of motion needed

to trigger recording (e.g., higher sensitivity
requires less motion to trigger recording).

b. Area Selection: Set the active area for

motion detection. Video appears with a red
grid overlayed, meaning the whole image is
active. Tap red squares to disable motion
detection in those areas (see example image
to the right). Tap Save when finished.

TIP: Disable areas that will trigger unwanted

motion events, like busy streets or trees and
shrubs that will move in the wind.

c. Distance Setting: Configure distance setting for motion detection. While watching

the camera’s video on your mobile device, recreate a motion event in front of your
camera. The icon will change from

to when motion is detected by the camera.
Change the distance setting if motion detection is being triggered by unwanted
events.

NOTE: Distance will be affected by temperature.

d. Buzzer: Set the recorder to sound an alarm when motion is detected.

5. Tap Save when finished. Repeat for other cameras on the system.

a

b

c

d

Pairing the Camera

Your cameras should be paired to the recorder and ready to use out of the
package. If a camera becomes unpaired, or if you have purchased a wire-free
add-on camera (max. 6 cameras per system), follow the instructions below.

3. Secure the bracket to the mounting surface
with the included mounting screws (×4). Make
sure all screws are fastened tightly using the
included screwdriver (item A+B in toolkit).

NOTES:

• Insert the included drywall anchors if you are

mounting the camera onto drywall.

• The hole at the top of the mounting bracket

will be used in step 5, once the camera is attached
to the mounting plate.

4. Lower the camera base onto the
mounting bracket so the 2 tabs in the
mounting bracket lock into the 2 slots in
the camera base.

5. Insert the security screw through
the fasteners on the top of the camera
base and mounting bracket to secure the
camera to the mounting bracket. Tighten
using the included screwdriver (item A+B
in toolkit).

To pair cameras using the Lorex Cirrus app:

1. From Live view, tap any
free channel you would
like to pair a camera to
(marked with a

icon).

2. Tap PAIR. A timer
for 30 seconds
appears.

NOTE: A “pairing successful” message should appear on screen. If you do not see

this message, repeat the steps above.

3. Press and hold the
pair button on the
back of the camera
for 3 seconds.

LWB4800 Series

LWB5800 / LWB6800 Series

Charging the Power Pack

Connect the included power adapter to the micro USB port
on the Power Pack, with the connector securely plugged in
to ensure a weather-resistant seal.

Power Pack Charge Time

2-cell

3-cell

LED Color Meaning

Green

Red

Approx. 6 hours

Approx. 8 hours

Fully charged

Currently charging

Troubleshooting

6. OPTIONAL: Tighten the pre-installed locking
screw on the base of the Power Pack using
the included screwdriver (item A+B in
toolkit).

NOTE: You will need to loosen the locking screw to

remove the Power Pack in the future.

7. Adjust the angle of the camera to complete the installation:

LWB4800 Series LWB5800 / LWB6800 Series

Twist the adjustment ring counterclockwise
to reposition the camera. Tighten the
adjustment ring when finished.

Adjustment ring

This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing
modes, an audible clicking noise may be heard from the camera. This clicking is normal, and indicates that the
camera filter is working.

Use the included Allen Key (item D in toolkit)
to loosen the adjustment screws labelled
below. Tighten all adjustment screws when
finished.

Camera levelling

ATTENTION:

Arm angling

Arm rotation

Available Accessories

The following accessories are available for purchase. Visit lorex.com and search for the
model numbers below for details:

Wire-Free Add On

Cameras

LWB4801AC2
LWB5801AC2

Extra Power Pack

Power Adapters

ACPWF1 (US)

ACPWF1P (EU/UK)

2-cell Accessory

Power Pack

ACBAT T2 ACBATT3

3-cell Accessory

Power Pack PLUS

Problem Solution

No picture / signal • Ensure the camera is connected to a compatible recorder. For full camera

Battery life is too
short

Picture is dropping • Move the camera closer to the recorder.

Picture is or has
become choppy

Camera is not
detecting motion

Picture is too bright • Ensure your camera isn’t pointed directly at a source of light (e.g., sun or spot light).

Night vision is not
working

Picture is not clear • Check the camera lens for dirt, dust, spiderwebs. Clean the lens with a soft, clean

Bright spot in video
when viewing at night

compatibility, visit lorex.com/compatibility.

• Ensure the Power Pack is properly inserted into the camera base.

• Ensure you have removed the PLEASE REMOVE label from the Power Pack.

• Connect the power adapter to your Power Pack to ensure it is charged. The LED on
the Power Pack glows green for full charge, or red for less than full charge.

• Remove obstructions between the recorder and camera. Materials such as brick,
concrete and wood can significantly impact the wireless signal strength.

• Try repositioning the camera, recorder, or both to improve the reception.

• Ensure the camera is not pointing at a high-traffic area. Position the camera so it only
captures areas of interest with no high-traffic areas (e.g., a busy sidewalk or roadway)
visible in the image.

• Live video is being viewed too frequently. Viewing live video often will impact battery
performance.

• Ensure you have set an active area and distance setting for motion detection to
reduce false alarms. See “Optimizing Motion Detection” for details.

• Battery life will vary based on temperature, settings and number of events.

• Try repositioning the camera, recorder, or both to improve the reception.

• Change camera resolution to 720p using the Lorex Cirrus app or the recorder to
increase the frame rate.

• Move the camera closer to the recorder.

• Remove obstructions between the recorder and camera.

• Your camera may be too far away from the area of interest. Try to keep the camera
within 20ft (6.1m) of the area you want to monitor.

• Review the “Installation Tips” and “Optimizing Motion Detection” sections to ensure
your camera is installed in an optimal location and motion detection is properly
configured.

• Move your camera to a different location.

• The night vision activates when light levels drop. The area may have too much light.

cloth.

• Too much environmental interference will affect picture clarity. Move your camera to a
different location.

• Night vision reflects when pointing a camera through a window. Move the camera to a
different location.

LHWF1000_QCG_EN_R1