Longshine LCS-GFS9326 User Manual
Longshine Technologie Europe GmbH
www.longshine.de
Table of Content
Unpacking Information
.....................................................................1
1. Introduction to 24+2G Gigabit Ethernet Web Smart Switch
...2
1.1 General Description........................................................................................................2
1.2 Key Features..................................................................................................................3
1.3 The Front Panel..............................................................................................................3
1.4 The Rear Panel...............................................................................................................5
2. Installing 24+2G Gigabit Ethernet Web Smart Switch
.........................................................................................................................6
2.1 Desktop Installation........................................................................................................6
2.2 Rack-mount Installation..................................................................................................6
2.3 Installing Network Cables...............................................................................................7
2.4 Network Application........................................................................................................7
3. Management guide
.........................................................................7
3. Management guide
.........................................................................8
3.1 Access the Switch...........................................................................................................8
3.2 Home Page...................................................................................................................10
3.2.1 System............................................................................... 11
3.2.2 Ports..................................................................................12
3.2.3 VLANS...............................................................................13
3.2.4 Aggregation/Trunking Configuration......................................14
3.2.5 Qos....................................................................................15
3.2.6 Discovery...........................................................................16
3.2.7 Default...............................................................................17
3.2.8 Reboot............................................................................... 17
4. Product Specifications
.............................................................. 18
Unpacking Information
Thank you for purchasing the 24+2G Gigabit Ethern et Web Smart Switch. Befor e
you start, please check all the contents of this package.
The product package should include the following:
1. One 24+2G Gigabit Ethernet Web Smart Switch
2. One power cord
3. Rubber foot and screws
4. Rack-mount brackets
5. One RS-232 Cable (Optional)
6. One CD_ROM for user’s manual
7. One quick installation guide
1
1. Introduction to 24+2G Gigabit Ethernet Web Smart Switch
1.1 General Description
The device is a 24+2G 10/100Mbps Ethernet Web Smart Switch.
The device is a powerful, high-performance Gigabit Ethernet switch, which
provides smart and efficient management functions and support 26 ports
connection with 24 ports of 10/100Mbps and 2 ports 10/100/1000Mbps with
Full/Half duplex capability. The NWay auto-negotiation operation automatically
negotiates with the connected partner s on the network speed and dupl ex mode;
that provides an easy way to integrate 10/100Mbps networ ks with no pain. It is
ideal for micro-segmenting large networks into smaller, connected subnets for
improved performance, enabling the bandwidth demanding multimedia and
imaging applications.
Out of the ordinary dumb switches, the 24+2G Gigabit Ethernet Web Smart
Switch embedded advanced management capability; that the device can be
managed through console port or web-based UI. This is much useful for system
manager to monitor and control the system efficiently.
Store-and-forward switching mode promises the low lat ency plus eliminates all
the network errors, including runt and CRC error packets. To work under
full-duplex mode, transmission and reception of the frames can occur
simultaneously without causing collisions as well as double the network
bandwidth.
2
The switch is plug-n-play without any software to configure and also fully
compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs
on the front-panel provide the operating status of individual port and whole
system.
1.2 Key Features
24 fixed 10/100Mbps Fast Ethernet ports for easy network connecting
application.
Support 2 fixed 10/100/1000Mbps Gigabit ports
Provide Auto-discovery Function for easy Network management.
Provide 8K MAC address entries and 26 groups VLAN table
Support Port aggregation.
Supports 3 types of QoS priority for port base, 802.1p & TCP/IP
TOS/DiffServ(DS) priority field
Support full duplex flow control and half duplex back pressure
Store-and-forward forwarding scheme
Error packet filtering
Supports 320K bytes buffer Memory
Support local Console port or Web-based UI for configuration
Internal switching power supply (100-240Vac/50-60Hz)
1.3 The Front Panel
The front panel of the switch is shown as below
Port Operation
There are 24 * 100Mbps and 2 * 1000Mbps RJ- 45 (copper) ports on the front
panel. The auto-negotiation feature of th e switch allows each port of the device
running at one of the following operation modes:
Speed Duplex Mode
Full Duplex
10Mbps
Half Duplex
Full Duplex
100Mbps
Half Duplex
1000Mbps
Full Duplex
All ports supports MDI/MDI-X
auto crossover
capability that is the port can
connect either the PC or hub without crossover cable adjustment.
3
Wiring for 10/100/1000Mbps (Copper)
Following are the summaries of cabling required:
Media Speed Wiring
10Mbps
Category 3,4,5 UTP/STP
100Mbps
Category 5 UTP/STP
10/100/1000Mbps copper
1000Mbps
Category 5,5e UTP/STP
LED Definition
The rich diagnostic LEDs on the front panel can provide the operating status of
individual port and whole system.
Power LED
This indicator lights green when the switch is receiving power; otherwise, it is off.
Port LEDs
Every 100Mbps RJ-45 port on the front panel relevant one LED for indicating t he
data transmit & receive status. And two 1000Mbps RJ-45 ports support four
LEDs to indicating the connection speed & data activity status.
Port LED summary table
10/100M
LED Status Statement
10/100M
Steady green
Blinking green
Connected as 10/100Mbps
The port is transmitting/receiving data
10/100/1000M
LEDs Status Statement
1000M Steady green Connected as 1000Mbps
100M Steady green Connected as 100Mbps
10M Steady green Connected as 10Mbps
ACT Blinking green
The port is transmitting/receiving data
If the port is connected but the Port LED is dark, check the following items:
The switch and the connected device’s power are on or not.
The connecting cable is good and with correct type
4
The cable is firmly seated in its connectors in the switch and in the
associated device
1.4 The Rear Panel
The rear panel of the switch is shown as below
5
Loading...