Longshine LCS-C824MC User Manual

Gigabit Multi-mode SX
to
Single Mode LX Converter
User’s Manual
COPYRIGHT
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photo copying, recording or otherwise, without the prior written permission of the publisher.
FCC WARNING
This equipment has been tested and found to comply with the limits for class A device, pursuant to part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user will be required to correct the interference at the user’s own expense.
Table of Contents
1. Introduction
Product Overview ............................. 1
Features ............................. 4
Specifications ............................. 5
Package Contents ............................. 6
2. Installation
SC Connector ............................. 7
Positioning of Converters ............................. 9
3. LED Indicators
LED Indicators ............................. 12
A. Appendix
Internal Power Supply ............................. 13
Coverter Mounting ............................. 14
Cable ............................. 13
1
Introduction
Product Overview
The Gigabit Multi-mode to Single Mode Converter range is primarily designed for network or data installations that require extended fiber distances between 850nm & 1300nm fiber mediums. Used individually or in conjunction with other converters, the fiber cable distances can now be greatly increased.
These Converters have been designed to support SC fiber optic connectors for Multi-mode and Single-mode configurations. It can also be adapted to used ST, MT-RJ and WDM type connectors, thereby widening its application across different types of networks. This flexibility allows the converter to easily connect to a Gigabit network using the existing connectors and fibers found in today’s networking environments.
At full-duplex, these converters can create potential distances of up to 30km with single mode to single mode fiber between two respective nodes. This media converter is designed for simple 'plug­n-go' installation into a Gigabit network environment.
Features
l Complies with IEEE 802.3z standard
l Supports Multi-mode & Single Mode fiber
l Extends fiber distance of up to 10km per
segment (max. possible distance of 30km with converter situated in the middle of two segments)
l Compatible with other Gigabit Multi-mode to Single Mode
devices
l Status LEDs for power & link to
easily monitor network activity
l Internal and external power supply options
l FCC Class A & CE approved
Loading...
+ 10 hidden pages