Logitech X-540 User Manual

Setup Installation Instalación
®
Logitech
X-540 Speaker System Système de haut-parleurs X-540
Important Safety InformatIon
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
• Do not push objects into apparatus vents or slots because re or electric shock hazards could result.
• Maintain a minimum distance of at least 6 inches around apparatus for sufcient ventilation.
• Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table clothes, curtains, etc.
• No naked (open) ame sources, such as lighted candles, should be placed on or near the apparatus.
• Place apparatus in a stable location so it will not fall causing product damage or bodily harm.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. The wide blade is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
Safety
English
eLeCtrIC SHoCK HaZarD
CaUtIon
• Operate the appartus only from the low level audio line output jack of the computer or of an audio device.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The apparatus shall be disconnected from the mains by placing the power/standby switch in the standby position and unplugging the power cord of the speakers from the AC mains receptacle.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS
WARNING:
TO RAIN OR MOISTURE.
Connecting your Logitech® X-540 speaker system
Thank you for purchasing the X-540 speaker system from Logitech. Your X-540 speakers are easy to use and produce great sound. To discover more Logitech products, or if you have questions about your X-540 speakers, visit us on the web at www.logitech.com.
1. Subwoofer 6. Power cord
2. Rear right speaker — white plug 7. Front center speaker — orange plug
3. Rear left speaker — black plug 8. Front left speaker — yellow plug
4. Audio input cable to PC — green, black & orange plugs 9. Wired remote control
5. Front right speaker — red plug
4
About your Logitech
X-540 speaker system
®
9
5
2
1
6
3
8
7
English
Connecting your Logitech® X-540 speaker system
A. Headphone jack B. Master volume knob C. Bass knob D. Matrix mode button E. Matrix mode light F. Power/standby light G. Power/standby button
F
G
A
B
C
E
D
Setup
English
Setting up your Logitech® X-540 Speakers
Important: For your safety, set up the system before plugging it into a power source.
1. Before attaching the cables to the subwoofer, position the two front satellite speakers on either side of your computer monitor about the same distance from each other as from you. Angle them to face you. Place the wired remote control within easy reach. Place the rear left and right satellite speakers behind you and about the same distance apart as the front speakers. Position the front center channel speaker on top of your monitor or on your desk in between your monitor and keyboard.
For best sound quality, place the subwoofer on the oor beneath your desk. Be sure to maintain at least 6 inches of spacing around the subwoofer to allow for adequate ventilation.
2. Insert the colored plug from each satellite speaker into the corresponding colored jacks on the back of the subwoofer.
3. A. If you have a PC and a:
• 6, 7 or 8 channel (5.1, 6.1 or 7.1) sound card: Connect all 3 colored plugs from the audio input cable to
the color-coded jacks on the sound card.
1. If jacks on your soundcard are not color coded, plug the audio input as follows:
• green to front L/R (or #1)
• black to rear L/R (or #2)
• orange to center / sub (or #3)
• 4-channel sound card: Connect the green plug from the audio input cable to your sound card’s front
jack and the black plug to your sound card’s rear jack. Do not use the orange plug.
• 2-channel sound card: Connect the green plug from the audio input cable to the “line out” jack on
your sound card. Do not use the black or orange plugs. With a 2-channel sound card you will not hear sound from the rear speakers unless you activate Matrix mode.
B. If you have a video game console:
• Connect the green plug from the audio input cable to
the green jack on the video game adapter cable.
• Connect the red and white RCA audio cables from your
video game console to the RCA audio jacks on the video game adapter cable.
• Turn on Matrix mode to get surround sound from your video game console.
4. Plug the subwoofer’s power cord into an electrical outlet.
English
Setup
Enjoying your Logitech® X-540 Speakers
Access these controls on the wired remote control:
Power Switch between standby (“off”) and on.
Volume Adjusts the overall system volume.
Bass Adjusts the subwoofer volume (bass level.)
Matrix Turns on Matrix mode. Use this button when you want to create 5.1 surround sound from 2-channel stereo sources like music and video game consoles.
Headphone Jack When headphones are used with your X-540 system, the speakers will mute automatically for private listening. Headphone volume is controlled by the soundcard on your computer.
Dolby® Digital
The X-540 speakers support Dolby® Digital sound on your PC if your 6-channel or greater sound card or DVD software can decode a Dolby® Digital soundtrack.
Setup - Operation
English
Mounting your Logitech® X-540 Speakers
Placing your speakers on top of a at-panel LCD monitor
The center channel speaker can be mounted on top of a at-panel LCD monitor. Swivel the center channel base back and make sure the lip under the front of the speaker is touching the front of the LCD monitor. Then, swivel the base back until it is touching the back of the LCD monitor and tighten the hinge screw for a secure t.
Hanging your speakers on the wall
Your Logitech® X-540 speaker satellites are wall mountable. Swivel the satellite base to desired position, and use the notch to hang your speaker on appropriate wall anchors. Tighten the screw in the bottom of the base, if required.
Setup - Operation
Notch
English
Specications
• Total RMS power: 70 watts RMS Satellites: 45 watts RMS (2 x 7.4W front, 15.4W center, 2 x 7.4W rear) Subwoofer: 25 watts RMS
• Total peak power: 140 watts
• Frequency response: 40Hz - 20kHz
• Drivers: Satellites: (2) 2” drivers per satellite Subwoofer: 5.25” ported driver
• Speaker dimensions (H x W x D): Satellites: 8.4” x 3.2” x 5.0” Center channel: 7.8” x 4.75” x 3.75” Subwoofer: 11.25” x 6.5” x 9.75”
Setup - Specications
English
Limited Warranty
Logitech warrants that any hardware product accompanying this documentation shall be free from significant defects in material and workmanship for a period of two (2) years from the date of purchase. Logitech’s limited warranty is nontransferable and is limited to the original purchaser. This warranty gives you specific legal rights, and you may also have other rights which vary under local laws. Remedies. Logitech’s entire liability and your exclusive remedy for any breach of warranty shall be, at Logitech’s option, to: (a) repair or replace the hardware, provided that the hardware is returned to the point of purchase or such other place as Logitech may direct, with a copy of the sales receipt, or (b) refund the price paid. Any replacement hardware will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. These remedies are void if failure of the hardware has resulted from accident, abuse, or misapplication. DISCLAIMER OF WARRANTY. THE WARRANTIES EXPRESSLY SET FORTH IN THIS AGREEMENT REPLACE ALL OTHER WARRANTIES. LOGITECH AND ITS SUPPLIERS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD-PARTY RIGHTS WITH RESPECT TO THE HARDWARE. NO LOGITECH DEALER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. LIMITATION OF LIABILITY. IN NO EVENT WILL LOGITECH OR ITS SUPPLIERS BE LIABLE FOR ANY COSTS OF PROCUREMENT OF SUBSTITUTE PRODUCTS OR SERVICES, LOST PROFITS, LOSS OF INFORMATION OR DATA, OR ANY OTHER SPECIAL, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING IN ANY WAY OUT OF THE SALE OF, USE OF, OR INABILITY TO USE ANY LOGITECH PRODUCT OR SERVICE, EVEN IF LOGITECH HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL LOGITECH’S AND ITS SUPPLIERS’ TOTAL LIABILITY EXCEED THE ACTUAL MONEY PAID FOR THE LOGITECH PRODUCT OR SERVICE GIVING RISE TO THE LIABILITY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. The above limitations will not apply in case of personal injury where and to the extent that applicable law requires such liability.
Warranty
English
Loading...
+ 19 hidden pages