Page 1
Wireless-G Broadband Router with 2 Phone Ports
PRODUCT DATA
Innovative triple-play networking solution
with QoS
All-in-one Internet-sharing
Wireless-G broadband router
with 4-port switch
Two standard phone jacks
enable feature-rich telephone
service over a broadband
Internet connection
Simple, easy and secure
Wi-Fi Setup with industry
standard push-button WPS,
wireless MAC address filtering,
powerful firewall capability,
and dual SSID capability
Advanced Quality of Service
(QoS) functionality for voice,
video, and data services
Model: WRP400
Page 2
PRODUCT DATA
Model: WRP400
Hardware
Features
Software Features
One 10/100 802.3/u (RJ-45) WAN Interface
•
Four 10/100 802.3/u (RJ-45) LAN Interfaces
•
Integrated 802.11b/g Wireless Access Point
•
Two FXS RJ-11 Interfaces
•
Reset Button / Restore Factory Defaults
•
LEDs – Power, Internet, Ethernet, Wireless, Phone(s), WPS
•
Power – External, 5V DC, 2A (full range switching power adapter)
•
Wi-Fi Protected Setup (WPS) Button
•
Static and Dynamic Routing (RIP 1, RIP2)
•
Multicast Pass-Through
•
Denial of Service (DoS) Prevention
•
Web Based Configuration
•
VPN Pass-Through with IPSec, L2TP and PPTP
•
Event Logging
•
DHCP Server
•
Access Control Lists
•
Universal Plug and Play (UPnP)
•
Password Protected Configuration or Management Sessions for Web Access
•
Remote Management (SIP SUBSCRIBE and NOTIFY message, use NOTIFY message to reset the
•
box remotely) and Remote Web Management
IGMP Multicast and IGMP Snooping (v1/v2/v3) Support
•
802.1p Prioritization QoS Support
•
DiffServ, ToS Classification
•
DMZ Hosting
•
WPA and WPA2
•
WMM (Wi-Fi Multimedia)
•
Dual SSID
•
Voice Features
Session Initiation Protocol (SIP v2, RFC3216)
•
Sending SIP Messages via UDP/TCP
•
G.711a, G.711u, G.729, G.726 Codec
•
G.711 Pass-Through
•
Echo Cancellation (G.167 and G.168)
•
Dynamic Jitter Buffer
•
Simple Traversal of UDP through NAT (STUN, RFC 3489)
•
Session Description Protocol (SDP, RFC 2327)
•
RTP/RTCP over UDP
•
Three-Way Conferencing
•
Remote Firmware Upgrade
•
Session Initiation Protocol (SIP v2)
•
DTMF Tone Detection and Generation
•
Voice Activity Detection (VAD)
•
Silence Suppression
•
Comfort Noise Generation (CNG)
•
Caller ID Generation and Detecting (FSK and DTMF)
•
Media Loopback
•
SIP TLS (Transport Layer Security)
•
Page 3
PRODUCT DATA
Model: WRP400
SIP Channels Support both UDP and TCP Transport
•
Support for 2 Simultaneous T.38 or G.729 Calls
•
T.38 Fax Relay including V.17, V.21, V.27ter and V.29 and FAX Pass-Through (PCM)
•
*T.38 Support is Dependent on Fax Machine and Network / Transport Resilience
Package Contents
Minimum
Requirements
Specifications
Wireless-G Broadband Router with 2 Phone Ports
•
Setup CD-ROM with Norton Internet Security
•
User Guide on CD-ROM
•
Ethernet Cable
•
Power Adapter
•
Quick Installation
•
High-Speed Internet Connection (cable/DSL/other)
•
Activated Voice Over IP Service
•
Model WRP400
* Note: Many specifications are programmable within a defined range or list of options. Please see the SPA
ATA Administration Guide for details. The target configuration profile is uploaded to the WRP400 at the
time of provisioning.
Data Networking MAC Address (IEEE 802.3)
IPv4 - Internet Protocol v4 (RFC 791) Upgradeable to v6 (RFC 1883)
ARP - Address Resolution Protocol
DNS - A Record (RFC 1706), SRV Record (RFC 2782)
DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
DHCP Server - Dynamic Host Configuration Protocol (RFC 2131)
PPPoE Client - Point to Point Protocol over Ethernet (RFC 2516)
ICMP - Internet Control Message Protocol (RFC792)
TCP - Transmission Control Protocol (RFC793)
UDP - User Datagram Protocol (RFC768)
RTP - Real Time Protocol (RFC 1889) (RFC 1890)
RTCP - Real Time Control Protocol (RFC 1889)
TFTP
RTSP
HTTP
NAT (RFC 1631)
Reverse NAT
SDP
SNTP - Simple Network Time Protocol (RFC 2030)
Type of Service - TOS (RFC 791/1349)
QoS - Packet Prioritization by Type
Router or Bridge Mode of Operation
MAC Address Cloning
Port Forwarding
IP Multicast / IGMP v1, v2, v3/ IGMP Proxy
Voice Features Voice Algorithms
G.711 (a-law and µ-law)
G.726 (16/24/32/40 kbps)
G.729 AB
G.723.1 (6.3 kbps, 5.3 kbps)
Call Forwarding: No Answer/Busy/Unconditional
Support for Two Simultaneous Calls
SIP TLS (Transport Layer Security)
Call Transfer
Call Waiting/Hold/Retrieve
Page 4
PRODUCT DATA
Model: WRP400
Specifications
Three-way Conferencing
Call ID Number & Name (Primary Line & On Call Waiting)
Call-ID Block (Prevent Send out the Caller ID)
Anonymous Call Blocking
Distinctive Ringing
Do not Disturb Setting
Repeat Dialing on Busy
Call Return
Emergency Call Support
Dial Plan
Speed Dial
Auto-Attendant
Multi-Room Meet-Me Conference
In-Band / SIP-INFO DTMF Translation
Provisioning,
Administration,
& Maintenance Web Browser Administration & Configuration via Integral Web Server
Telephone Key Pad Configuration with Interactive Voice Prompts
Automated Provisioning & Upgrade via HTTP, TFTP, HTTPS
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-Intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records
Per Line and Purpose Configurable Syslog and Debug Options
Physical Interfaces 4 100Base-T RJ-45 Ethernet Port (IEEE 802.3)
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device
USB 2.0 (reserved for future use via firmware upgrade)
Buttons Reset, WPS
Subscriber Line
Interface Circuit
(SLIC) Ring Voltage: 40-90 Vpk
Ring Frequency: 20 to 25Hz
Ring Waveform: Trapezoidal with 1.2 to 1.6 Crest Factor
Maximum Ringer Load: 3 REN
On-Hook/Off-Hook Characteristics:
On-Hook Voltage (Tip/Ring): - 46 to -56V
Off-Hook Current: 18 to 25mA
Terminating Impedance:
600 ohm Resistive
270 ohm + 750ohm//150nF Complex Impedance
Frequency Response: 300 – 3400Hz
Regulatory
Compliance FCC (Part 15 Class B), CE, ICES-003, RoHS
Number of
Antennas 1
Connector type Fixed
Detachable (y/n) No
RF Pwr (EIRP)
in dBm (Average, not Including Antenna)
802.11g: Typ. 18 dBm @ Normal Temp Range (with PA)
802.11b: Typ: 20 dBm @ Normal Temp Range (with PA)
Antenna Gain
in dBi 2 dBi
UPnP able/cert Yes
Power Supply Switching Type (100-240V) Automatic
DC Input Voltage: +5 VDC at 2.0 A Max.
Power Consumption: 7.9 watts (Average)
Power Adapter: 100-240V - 50-60Hz (26-34VA) AC Input, 1.8 m Cord
Page 5
PRODUCT DATA
Model: WRP400
Specifications
Indicator Lights/
LEDs Power, Ethernet, Wireless, Phone 1, Phone 2, Internet, WPS
Documentation Quick Installation and User Guide are Downloaded from www.linksys.com
Linksys SPA ATA Administration Guide - Service Providers Only
Linksys Provisioning Guide - Service Providers Only
Security Features Password-Protected Configuration for Web Access
Denial of Service (DoS) Prevention
URL Filtering, and Keyword, Java, ActiveX, Proxy, Cookie Blocking
VPN Passthrough for IPSec, PPTP, and L2TP Protocols
64, 128 bits WEP with Passphrase WEP Key Generation
SSID Broadcast Disable
Access Restriction by MAC and IP Addresses
Wi-Fi Protected Setup (WPS), Wi-Fi Protected Access™ (WPA),
Wi-Fi Protected Access™ 2 (WPA2)
Security Key Bits 64, 128
Environmental
Dimensions 5.51" x 5.51" x 1.06" (140 x 140 x 27 mm)
Weight 10/05 oz (285 g)
Power External, Switching 5VDC 2A
Certification FCC, CE, CB, IC, UL, Wi-Fi (802.11b + WPA2, 802.11g + WPA2, WMM)
Operating Temp. 32 to 104°F (0 to 40°C)
Storage Temp. -4 to 158°F (-20 to 70°C)
Operating Humidity 0 to 85%, Relative Humidity, Noncondensing
Storage Humidity 5 to 90%, Noncondensing
Page 6
The Linksys WRP400 Wireless-G Broadband Router with 2 Phone Ports is an impressive
and versatile networking solution offering advanced triple-play services prioritization in a
single intelligent compact device.
Whether it’s broadband internet sharing, VoIP service, or enhanced services like multimedia
gaming, streaming media, or IPTV, the innovative development of the WRP400 provides
users with the Quality of Service (QoS) requirements that must now be implemented
to ensure guaranteed service delivery for the latest generation of applications that are
becoming more prevalent.
The WRP400 itself has a wireless access router to link both Wireless-G (802.11g at 54Mbps)
and Wireless-B (802.11b at 11Mbps) and also includes a built-in, 4-port, full-duplex, 10/100
Ethernet switch to connect PCs directly or attach additional hubs and switches to create
as big a network that is needed. A robust firewall feature protects local computers and
prevents malicious attacks from outside intruders. The two telephone ports enable highquality feature-rich VoIP service utilizing existing analog phones.
PRODUCT DATA
Model: WRP400
With the Linksys Wireless-G Broadband Router with 2 Phone Ports at the center of your
home or office network, customers will appreciate the higher level of quality associated
with their on-line experience that ensures fault-tolerant data delivery, exceptional voice
quality, and continuous, uninterrupted streaming media that they have now come
to expect.
Highlights
Toll Quality Voice and Carrier-Grade Feature Support
The WRP400 delivers clear, high-quality voice communication in diverse network
conditions. Excellent voice quality in a demanding IP network is consistently achieved
via our advanced implementation of standard voice coding algorithms. The WRP400 is
interoperable with common telephony equipment like voicemail, fax, and interactive voice
response systems.
Large-Scale Deployment and Management
The WRP400 offers all the key features and capabilities with which service providers can
provide customized services to their subscribers. The WRP400 can be remotely provisioned
and supports dynamic, in-service software upgrades. A secure profile upload saves
providers the time, expense and hassle of managing and pre-configuring or re-configuring
customer premise equipment (CPE) for deployment.
Ironclad Security
Linksys understands that security for both end users and service providers is a fundamental
requirement for a solid, carrier-grade telephony service. The WRP400 supports secure,
encryption-based methods for communication, provisioning
and servicing.
Linksys
Web:
http://www.linksys.com
Linksys products are available in more than
50 countries, supported by 12 Linksys
Regional Offices throughout the world.
For a complete list of local Linksys Sales
and Technical Support contacts, visit our
worldwide website at www.linksys.com
The maximum performance for wireless
is derived from IEEE Standard 802.11
specifications. Actual performance can
vary, including lower wireless network
capacity, data throughput rate, range and
coverage. Performance depends on many
factors, conditions and variables, including
distance from the access point, volume
of network traffic, building materials and
construction, operating system used, mix
of wireless products used, interference and
other adverse conditions.
Specifications are subject to change
without notice. Linksys is a registered
trademark or trademark of Cisco Systems,
Inc. and/or its affiliates in the U.S. and
certain other countries. Copyright © 2007
Cisco Systems, Inc. All rights reserved.
Other brands and product names are
trademarks or registered trademarks of
their respective holders.
7091910A-JL
Loading...