Linksys WET54G Quick Start Manual

A Division of Cisco Systems, Inc.

GHz

802.11g

Wireless

Model No.

WET54G (UK/EU/LA) v2

Package Contents

• Wireless-G Ethernet Bridge

•Setup CD-ROM

• User’s Guide on CD

• Quick Installation Guide

• Detachable Antenna

• RJ-45 Network Cable

• One Pair of Bridge Stands

• Power Adapter

Wireless-G

Ethernet Bridge

Quick Installation Guide

Connect the Wireless-G Ethernet

Bridge for Setup

A Attach the detachable

antenna.

B Plug the included Ethernet

network cable into the LAN port on the back panel of the Bridge.

C Plug the other end of the

Ethernet network cable into the RJ-45 port of the hub, switch, or PC you wish to use to configure the Bridge.

D Plug the supplied power

adapter into the Power port on the back panel of the Bridge. Then plug the other end into an electrical outlet.

Set up the Wireless-G

Ethernet Bridge

Insert the Setup CD-ROM into your PC’s CD-ROM drive. The Setup Utility should run automatically, and the Welcome screen should appear. If it does not appear, click the Start button and choose Run. In the field that appears, enter D:\setup.exe (if “D” is the letter of your CD-ROM drive).

B Click Setup to begin the setup

process.

C Make sure the Bridge is

correctly connected to your wired network. Click Next.

D The screen displays a list of

Wireless-G Ethernet Bridges on your network, along with their status information. Select the Bridge you are currently installing by clicking its name in the Selection box. Click Yes.

+ 5 hidden pages