Lightolier Merit Gas Furnace User Manual

LOT Series Uninterruptible Power Supplies LOT

Page 1 of 2

1.5 kVA - 4.2 kVA Single Phase UPS System

Operates incandescent, magnetic and electronic ballast fluorescent, high power factor compact fluorescent, and high intensity discharge (HID) lamp types.

(B)

(A)
			kVA	1.5 - 3.5	4.2
			Width (A)	36”	36”
			Depth (B)	24”	24”
Electronics/
Battery	(C)		Height (C)	72”	80”
Cabinet

How to Specify:

LOT

SERIES	INPUT
	VOLTAGE
LOT = Single	A = 120 V
Phase	G = 120/240V
Uninterruptible	J = 277 V
Power	L = 120/208V
Supplies

OUTPUT	UNIT
VOLTAGE	SIZE
A = 120 V	1.5 = 1.5 kVA
G = 120/240V	2.2 = 2.2 kVA
J = 277 V	3.0 = 3.0 kVA
L = 120/208V	3.5 = 3.5 kVA
Y = 120/277V	4.2 = 4.2 kVA

BACK-UP	NOL	OUTPUT	# ON 2ND	# OF NOL	NOL	# OF NOL
DURATION		CKT BRKRS	VOLTAGE	CKT BRKRS	VOLTAGE	2nd VOLTAGE
S = 90 min	0 = None	00X = Hardwire	00 = 2nd	A = 1	1 = First	A = 1
X = 10 min	1 = Yes	01X = 1 OCB	Voltage	B = 2	2 = Second	B = 2
Y = 20 min	T = NOL w/ TDT	02X = 2 OCB	Hardwire or no	C = 3	3 = Both	C = 3
		03X = 3 OCB	2nd Voltage	D = 4	0 = No NOL	D = 4
		04X = 4 OCB	01	E = 5		E = 5
				F = 6		F = 6
		:	02
				G = 7		G = 7
		:	03
				H = 8		H = 8
		20X = 20 OCB	:
				I = 9		I = 9
		------------------	:
				J = 10		J = 10
		01A = 1 OCBA	19
				K = 11		K = 11
		02A = 2 OCBA
				L = 12		L = 12
		03A = 3 OCBA		M = 13		M = 13
		:		N = 14		N = 14
		:		O = 15		O = 15
		10A = 10 OCBA		P = 16		P = 16
		Max. Pole		Q = 17		Q = 17
		Spaces 20		R = 18		R = 18
				S = 19		S = 19
				T = 20		Z = No NOL
				Z = No NOL

Overall Characteristics

•87 - 90% throughput efficiency, 85% emergency efficiency

•Operating temperature range 32°F (0°C) to 104°F (40°C)

•Fault current rating 42kAIC

•Audible noise less than 50dB at 3 ft on “A” weighted scale

•Automatic low battery voltage disconnect

Electrical

•Sine Wave Output

•Double conversion, no interruption

•Voltage regulation ±2%

•Frequency regulation - synchronized to utility, free running 60 Hz, ±0.5%

•Output voltage distortion maximum 3% THD with linear load

•Load power factor capability 0.7 lead to 0.7 lag

•Overload capacity 125% for 10 seconds

•Input power factor correcting to 0.99

•Frequency range 60Hz, ±2.5%

•Input harmonic current distortion <5% THD

•UL 1449, ANSI,IEEE C62, 41 surge suppression

•Completely solid-state Pulse Width Modulation (PWM) inverter

•Internal, make before break maintenance by-pass

•Standard, UL 924 compliant, 90 minute battery backup

•UL 924 auxiliary equipment 10 and 20 minute backup available

•Microprocessor control and diagnostic system

•LED array system status panel

•Fault annunciating audible alarm

•Current limiting start sequence

•Optional output circuit breakers (OCB) and circuit breakers with trip alarm (OCBA)

•Optional normally off load (NOL) energizes only during power outage, normally off load with time delay (TDT) also available

Housing

•Free standing, NEMA 1 enclosure

•Seismic anchoring compatible

•Lockable control access panel

Applications

•The solid-state Pulse Width Modulated (PWM) inverter offers enhanced load compatibility

•Provides conditioned, uninterruptible power for other types of critical loads. Consult factory for non-lighting load applications.

Job Information

Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte Company www.lightolier.com 631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone] We reserve the right to change details of design, materials and finish.

© 2006 Genlyte Group LLC (Lightolier Division) • B0406