Lightolier 1104IC User Manual

		Lytecaster® Recessed Downlighting  1104IC
	Page of 1	6 3/4” Apertures 0® Incandescent Convertible IC/Non-IC Frame-In Kit
	7	1104ICN
	1	(Integral Nail)
		1104IC	Overall Length
		(Integral Screw)	1104IC/N: 10 3/4”

			13” Min.		Overall Width	Frame-in Kit
					1104IC/N: 7 5/16”
			24” Max.
2	5		3
6		4	Overall Height
			1104IC/N: 7 1/2”	Top View
						Reflector Trim

CEILING OPENING

7” Diameter

Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.

Frame-In Kit	Reflector Trims — See Individual Reflector Trim Specification Sheets
1104IC			Open Downlight					Eyeball	Enclosed	Wall Washer
1104ICQ**	Reflector	Cone	Satin Cone	Cross Blade	Baffles		Basic White		Diffusers
1104ICN	1143	1112†	1108†	1132	1105		1170M1	1182	1121	1185*
1104ICNQ**
	1144	1113†	1110†		1105WH		1171		1124	1186*
	1144CD	1113BK†			1176				1126*	1186WH*
		1113CD†			1176WH				1128*
		1113WH			1179M1				1134*
					1179WH				1177SH*
									1178SH*
									1177LX
									1178LX
									1190
†Add NM to catalog number for Natural Metal flange and finish.				* For Non-IC applications only.					Open Wet
									1181WH
				**Supplied with integral push-In wire connectors
									1181CD

Features

1.Housing: .032 (#20 ga.) aluminum. UL listed convertible IC/NON-IC. 2” vertical adjustment in ceiling. Can be removed for access to junction box and ceiling plenum. AirSeal® housing minimizes air leakage to less than 2 CFM at 1.57 PSF (or 75pa), which complies with Model Energy Code (Section 602.3.3) and Washington State Energy Code (Section 502.4) and reduces heat loss and condensation in ceiling.

2.Mounting Frame: .048 (#18 ga.) galvanized steel. Locks into position along length of mounting bars with locking spring and bendable slot. (3) slots 90° apart simplify alignment.

3.Junction Box: 2”X 4” X 3 1/2” (22 cu. in.) .032 (#22 ga.) galvanized steel. UL listed for maximum of 8 (#12 ga.) through branch circuit conductors. Integral cable clamps permit attachment of non-metallic (#12 or #14 ga.) Romex® cable without tools or additional connectors.

4.Mounting Bars: .059 (#16 ga.) galvanized steel. Bars pivot for easy attachment and wire-in below ceiling line. Bars extend to accommodate 16” to 24“ O.C. joist spacing. 1104IC features integral self-tapping phillips screws for secure attachment to wood or metal construction. The 1104ICN features integral nails for secure attachment to wood. Both attach to T-bar ceilings without the need of accessories.

5.Socket Housing: Impact extruded aluminum or galvanized steel. Attached trim retaining spring secures trim to any height on housing wall.

6.Socket: Porcelain medium base: nickel plated screw shell. Pre-wired with #18 ga. SF1 (300 VOLT 200° C) leads to junction box.

7.Thermal Protector: Meets NEC and UL requirements. Located inside housing.

Options & Accessories

AirSeal® Kit:

LAS56

Options & Accessories (continued)

Note: Use only if factory installed tape or knockouts are removed from vertical adjustment slots in housing wall.

Labels

UL (Type IC/NON-IC Convertible; Suitable for Damp Locations);

Complies with Air Leakage Requirements stated in the Model Energy Code and the Washington State Energy Code.

AirSeal® is a registered trademark of Lightolier.

Romex® is a registered trademark of General Cable Industries Inc.

US and Foreign Patents Pending.

Job Information	Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte company www.lightolier.com 631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone] We reserve the right to change details of design, materials and finish.

© 2007 Genlyte Group LLC •I0507