Page 1
Owner’s Manual
TR6000i Light Commercial Treadmills
Page 2
Welcome
Congratulations on Purchasing Your LifeSpan Treadmill!
At LifeSpan we take pride in the quality, safety, and reliability of our products
as well as the professionalism of our sales support and customer service teams.
Making it our number one priority that you have an exceptional experience using
our products.
In support of this quality focus we pre-assemble parts on the manufacturing line
whenever possible to reduce the number of steps and complexity of customer
assembly, independently certify our products to comply with the latest industry
Safety Standards, and use state of the art production processes and quality
components.
Then we back LifeSpan products with excellent warranties and a responsive
customer service department making it simple and easy to get assistance should
the need arise.
This attention to quality, our high standard for customer service and focus on
innovation has earned LifeSpan numerous awards and consistent praise from
independent review groups, industry authorities and you the consumer.
Thanks for choosing LifeSpan.
Neither LifeSpan nor its representatives can accept responsibility for any damages or injury incurred as a
Please thoroughly read this manual before you assemble or operate your treadmill.
result of information presented in this manual except under the terms of the product warranty.
1
Page 3
Welcome
Contents
Safety First
Safety Tips
Safety Key
About Your Treadmill
Specications
Unique Features
Console Overview
Heart Rate Monitoring
Programs
Warranty / Registration
Grounding
Assembling Your Treadmill
Exploded View & Hardware
Assembly Instructions
Console Basics
Readout Display
Operating Keyboard
Using Programs
5
8
24
32
36
Saving Your Results
Maintenance and Tips
Personal Settings
Cleaning and Lubrication
Belt Tensioning
Belt Adjustment
Leveling
Moving the Treadmill
Troubleshooting
42
44
3
Page 4
4
Page 5
Safety First
When using exercise equipment, basic precautions should always be followed,
including:
• Never drop or insert any object into any opening. If an object falls into an
opening, turn the power o and unplug the power cord from the outlet.
Remove the object or call customer service at 877.654.3837 option 4.
• Never operate this treadmill if it has been damaged or partially
submersed in water.
• To reduce the risk of electric shock, unplug the treadmill from the wall
outlet when not in use, before performing any maintenance, or before
moving the treadmill.
• Do not use outdoors or in areas of high humidity or extreme temperature
changes.
• Do not lean against or climb on the treadmill.
• Do not operate where aerosol spray products are being used or where
oxygen is being administered.
• Never place the power cord under carpeting or place any object on top
of the cord, this may pinch or damage the cord causing re damage or
personal injury.
• Use this exercise product for its intended use as described in this Owner’s
Manual. Do not use attachments that are not recommended by LifeSpan.
• Do not leave your treadmill running while not in use.
Children and Pets
• Keep children from playing on your treadmill at all times.
• When in use children and pets should be kept at least 10 feet (3m) away.
• This treadmill can be used by children ages 12 years and above and
persons with reduced physical, sensory or lack of experience and
knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be made by children without
supervision.
5
Page 6
Safety First
Safety Tips While in Use
• Always consult a physician before beginning an exercise program.
• If you experience chest pains, nausea, dizziness or shortness of
breath, stop exercising immediately and consult your physician before
continuing. Do not wear clothing or jewelry that might catch on any
part of the treadmill.
• Wear shoes with high traction rubber soles. Do not wear shoes with
heals, leather soles, cleats or spikes.
• In case of emergency, grab onto the side handrails and place your feet
on the side rails located on each side of the running belt.
• Do not walk or run backwards on the treadmill, always face forward.
• Allow the running belt to fully stop prior to getting o the treadmill.
• Keep the treadmill on a solid surface, with the side rails and front of the
treadmill a minimum of 2 feet (0.6m) from any walls or furniture. Make
sure that the area behind the treadmill remains completely clear during
use. A minimum of 7 feet (2m) of clearance is required for safety reasons.
Safety Clearance
2 Feet (.6 m)
7 Feet (2.0 m) 2 Feet (.6 m)
2 Feet (.6 m)
6
Page 7
Safety First
EMERGENCY STOP
Safety Key
The safety key is required to operate this treadmill. With the safety key
installed the treadmill is operational. With the safety key pulled, power is
turned o to the motor making the treadmill inoperable.
Securely attach safety
key clip in case of a fall
Fixed safety key
stays secure to
console when
pulled
CAUTION: For your safety always attach safety key clip to an
!
article of clothing prior to use. The safety key clip needs to be
securely attached to clothing parallel to or above the height of
the safety key.
WARNING: Heart rate monitoring systems may be
!
inaccurate. Over exercising may result in serious injury or
death. If you feel faint stop exercising immediately.
Note: Read all instructions and save for future reference.
7
Page 8
About Your Treadmill
Specications
TR6000i
Drive Motor 3.5 HP AC Continuous Duty
Incline 3 Decline
13 Incline
Rollers Front: 3.0” (75 mm)
Rear: 2.0” (50 mm)
Speed Range 0.5 - 13.5 mph (0.8 - 22 kph)
Running Belt 2.4 mm commercial belt
Running Belt Size 22” x 60” (56 cm x 152 cm)
Max User Weight 375 lb (171 kg)
Standard Readouts Speed, Incline Level, Calories, Exercise Time,
Current Heart Rate, Distance, Step Count,
Program Prole
Summary Readouts Max Heart Rate, Percent Max. Heart Rate,
Average Heart Rate, Average Pace,
Total Feet Climbed
Display Readouts Program Name, Current Mile Pace,
Incline Feet Climbed, Decline Feet Descended
Heart Rate Contact Sensors / Chest Strap*
*Chest Strap included in North America and UK
Programs Speed and Incline programs designed for Weight
Management, Healthy Living, Sports Training, plus
2 Custom User, 2 Heart Rate Control and
2 Fitness Tests.
Deck Suspension 8-Independent Shock Absorbers
8
Page 9
About Your Treadmill
Unique Features
As a leader in the tness industry, LifeSpan has developed a number of
unique features in our treadmills making them more engaging, safer and
easier to use. Learn more about how to use these features in the Saving Your
Results and Personal Settings sections of this Owner’s Manual.
Intelli-Guard™
Walk condently knowing your safety is assured with Intelli-Guard™.
Step away from your treadmill for more than twenty seconds and your
treadmill’s belt will automatically glide to a smooth stop.
Intelli-Key™
Console operation is simplied with sequential button illumination
prompting you through program selection and setup.
Intelli-Step™
Never miss a stride with Intelli-Step™. Your steps are automatically
calculated with meticulous precision, displaying immediate feedback
and historical trends via your Club account.
Club Membership
Every treadmill comes with a full membership in the Club, LifeSpan’s
award-winning health and tness software. Keep track of all your
activity and information in one secure location.
USB Plus
Dual-purpose USB port charges most of your mobile devices* and saves
your exercise results for upload into your free Club account.
Bluetooth
Optional Bluetooth adapter allows for wireless data sync with the
LifeSpan Active Trac™ and Train & Trac™ apps to get the most out of
your workout and capture your exercise results.
* Does not charge iPad 1, iPad 2, and iPad 3.
9
Page 10
About Your Treadmill
Console Overview
Audio Input
USB Plus
Power Button
10
Safety Key
Page 11
Readout Display
About Your Treadmill
Built-in Speakers
Media Holders
Operating Keyboard
11
Page 12
About Your Treadmill
Heart Rate Monitoring
Seeing your heart rate
while exercising will
help you understand the
intensity of your exercise
and corresponding heart
rate training zone, and
predict health benets
found through repeated
bouts of exercise. Refer to
the information below to
understand your heart rate
training zones:
Zone 5 — Performance Redline Zone: 90% - 100% of your Max HR
The performance zone involves extreme eort, requiring the heart to beat at
or near maximum capacity. Training bouts include intense incline or sprinting,
beneting speed, power, and anaerobic performance competency.
Zone 4 — Threshold Zone: 80% - 90% of your Max HR
The threshold zone involves intense jogging or sub-maximal sprinting,
typically unsustainable for long periods of time. Benets include highlyelevated calorie burn, speed and power performance enhancement,
improved lactate removal capabilities, and enriched heart health.
Zone 3 — Aerobic Zone: 70% - 80% of your Max HR
The aerobic zone is ideal for cardiovascular training. Workouts in this zone are
more intense, involving moderate jogging. Long-term benets are improved
heart health and cardiovascular performance, reductions in blood pressure
and cholesterol, and increased calorie burn.
Zone 2 — Temperate Zone: 60% - 70% of your Max HR
The temperate zone consists of moderate-intensity exercise, typically as fast
walking to slow jogging. Speaking is more dicult and breathing is elevated.
Benets are similar to those of the healthy heart rate zone, though caloric
expenditure is higher.
Zone 1 — Healthy Heart Zone: 50% - 60% of your Max HR
The healthy heart zone involves safe, low-intensity activity, like mediumto-brisk walking. Full conversations can be held, despite a gentle increase
in respiration. Benets include reduced risk of heart and vascular disease,
moderated blood pressure and cholesterol, and improved insulin sensitivity.
12
Page 13
About Your Treadmill
Hand Pulse Sensors
To use, grasp the sensors with a comfortable grip, with the palms of your
hands placed over the sensors. If the sensors are having diculty picking up
your heart rate, use aloe or a moisturizer on your hands or further warm up
as you exercise to increase the moisture in your hands. Dry hands do not
transfer your pulse as eectively as moist hands.
Chest Strap
The TR6000i treadmills have integrated heart rate receivers built into the
console. To purchase a heart rate chest strap go to
www.LifeSpanFitness.com.
The chest strap should be worn as shown.
When using a chest strap you may need to
warm up rst to increase the moisture in
your skin. If this doesn’t work use aloe or
another moisturizer where the sensors on
the chest strap are making contact with
your skin.
Note: The heart rate monitoring system will vary due to your age,
method of use, physiology and other factors. LifeSpan cannot
guarantee the accuracy of the heart rate readings.
13
Page 14
About Your Treadmill
Advanced Programs
Remember, if you simply get on your treadmill and go at the same pace, for
the same amount of time everyday your body will only improve to the level
of the workouts you are pushing yourself to do. To help get the most out of
your time spent exercising, LifeSpan treadmills include a full range of workout
programs. All programs are available in either “Speed” or “Incline” mode with
3 levels of intensity that you select during program set-up. When the “Speed”
mode is selected, the belt speed will vary during your workout while the
incline level stays constant. In “Incline” mode the speed remains constant
while the incline is adjusted by the program. In either mode you have full
control of the setting that is not being controlled by the program.
The treadmill adds a three-minute warm up and cool down to each of these
preset programs. It starts at 3 mph (for warm up) or 2.5 mph (for cool down),
but you have full control over the speed. To skip warm up, press Start. To skip
cool down, press Stop. The distance, steps, time, and calories you accumulate
in warm up and cool down are not counted in your workout totals.
To complement these preset programs you also can use either of the 2 types
of heart rate training programs or design your own program. Refer to your
LifeSpan Club account for a full workout calendar using these programs.
Preset Programs
Long Slow Distance
(40 minutes default)
Long Slow Distance is a great
workout for anyone! Beginners can ease into their exercise program and
should include a Long Slow Distance workout each week to maximize overall
cardiovascular endurance development. Long Slow Distance workouts
are also great for experienced exercisers on days following a harder, higher
intensity workout.
Short Interval
(20 minute default)
Short Intervals are ideal for
beginning exercisers that want to start gaining the benets of interval
workouts but aren’t quite ready for a longer-intensity interval workout. Short
intervals are also ideal for experienced exercisers to develop their speed and
anaerobic tness. Remember, it’s important to vary exercise intensity and
duration to maximize overall tness development so be sure to include some
interval workouts at least once a week.
14
Page 15
About Your Treadmill
Moderate Interval
(30 minute default)
As you begin to exercise on a
regular basis and feel your tness improving you will be ready to begin
doing “Moderate Intensity Interval” workouts. Remember in this workout you
alternate between an easy recovery interval and a higher intensity interval.
You should feel comfortable to push yourself as you are never too far away
from an easier recovery interval. This workout will improve your overall
aerobic endurance while also maximizing anaerobic tness development.
Long Interval
(40 minute default)
Long Interval workouts are great
to maximize calorie burn and improve anaerobic tness. As in the Moderate
Interval workouts, remember you have a recovery period after each higher
intensity interval so you can comfortably push yourself to exercise at a
progressively higher level.
Negative Interval 1
(30 minute default)
The Negative Interval-1 workout
provides the benets of a Steady
Pace workout but pushes you to slowly obtain a progressively higher steady
state exercise intensity and then allows you to slowly decrease the exercise
intensity. As your tness level improve, you can slowly push yourself to a
higher peak in overall exercise intensity.
Negative Interval 2
(30 minute default)
The Negative Interval-2 workout
has been designed to provide your body with a workout that begins with
a slight increase in exercise intensity and ends with a progressive decrease
in intensity. A workout with an increase and decrease in intensity will most
ideally develop your overall aerobic cardiovascular endurance. A workout
that decreases in intensity is also ideal for maximizing calorie burn, but most
ideally when done for a longer duration, such as 40 or 50 minutes.
15
Page 16
About Your Treadmill
Fartlek
(30 minute default)
Varying your exercise intensity
with a constantly changing interval
workout that starts out at an easy pace and then increases to a moderate or
higher intensity pace will add variety into your workouts, make workouts go
by faster and provide great tness benets. Constantly varying intensities
in a workout have been found in brain research to have great benets on
improving overall brain tness.
Uphill Climb
(30 minute default)
Gradually increase the intensity
of your exercise with this fun
Uphill Climb workout. The goal of the Uphill Climb is to stimulate your body
to improve overall cardiovascular tness while maximizing muscle cell
development in working muscles. You will maximize calorie burn during the
peak levels while allowing your body to exercise longer and still benet from
the higher intensity as you slow down and return to your starting level.
Pyramid Climb
(30 minute default)
Gradual increases in intensity is
ideal to stimulate your body to
improve overall cardiovascular tness, while also maximizing muscle cell
development in working muscles. You will maximize overall calorie burn
during the peak intensity levels while allowing your body to exercise for a
longer duration and still benet from the higher intensity as you gradually
slowdown.
Plateau Climb
(40 minute default)
A Plateau Climb workout will
provide you with all the benets of
other steady state workouts, but push you to maintain a higher steady state
exercise level. As you improve your overall health and tness you can slowly
push to a higher overall intensity for longer periods of time.
16
Page 17
About Your Treadmill
Ladder
(30 minute default)
One of the greatest benets
of exercise are the direct
benets exercise has on the heart and cardiovascular system. The Heart
Health Ladder has been specically designed to provide your heart and
cardiovascular system with a series of progressively harder exercise
intensity’s that will improve your overall aerobic endurance, while also
stimulating anaerobic endurance. Remember that it may be challenging for
a few minutes, but each progression has been carefully designed to provide
recovery intervals so you can push to improve your cardiovascular tness.
Uphill Interval
(20 minute default)
Uphill Interval workouts are unique
in that they provide your body with the benets of an interval workout,
with the added benets of gradually increasing the overall intensity. In this
workout you should begin at a level that is comfortable and then increase
the intensity during each maximum interval, pushing to a slightly higher
intensity each time. You will get maximum overall calorie burn during of the
higher intensity intervals, while at the same time working on improving your
overall anaerobic tness.
Steady Pace
(40 minute default)
Improve your tness while also
simulating your body to burn more fat with this workout. Steady Pace
workouts are great for helping you establish an improved overall endurance
base. Most “Steady Pace” workouts focus on maintaining one set workload
throughout the entire workout. Your goal is to be sure you are exercising
within a low moderate intensity to a high moderate intensity during the
workout.
17
Page 18
About Your Treadmill
Long Slow Distance 2
(40 minute default)
Compared to the Long Slow
Distance 1 program, this workout expedites the rate of increasing exertion,
allowing for more workout time to be spent at higher levels of intensity.
Cardio Run
(20 minute default)
Cardio Run is a steady pace
workout but at a higher intensity than “Long Slow Distance”. Cardio Run
is a more advanced workout, designed to motivate you to achieve a more
challenging steady pace and maintain that pace for the full duration of the
workout. Cardio Run is a great workout if you are training for a special event.
Short Interval 2
(20 minute default)
Short interval workouts have been
found in research studies to be
ideal for those striving to lose weight and improve cardiovascular tness.
Varying exercise intensity from a moderately slow level to a high intensity for
a set period of time and repeating that progression for a complete workout
will maximize the number of calories burned. The short interval recovery
periods allows the body to more successfully exercise at a higher intensity
than might otherwise be comfortable for a complete workout duration.
Uphill Walk
(30 minute default)
The uphill walk gradually increases
the intensity of your exercise
peaking at a high intensity. The goal of the uphill workout is to stimulate
your body to improve overall cardiovascular tness, while also maximizing
muscle cell development. The Uphill Walk has been designed to start slow
and gradually increase to a peak intensity then with a quick decrease back
to a recovery level. You will maximize calorie burn during the peak intensity
levels while allowing your body to exercise for longer periods.
18
Page 19
Rolling Hills: Decline
(30 minute default)
Gentle shifts between uphill and
downhill incline settings, suitable
for those new to treadmill incline/decline running.
About Your Treadmill
Short Interval: Decline
(30 minute default)
The most challenging of the
decline workouts. Transitions occur rapidly between varying levels of incline
and decline, with short recovery times provided between changes.
Downhill Repeats: Decline
(30 minute default)
Similar to Short Interval Decline,
but with consistent incline and decline levels and extended recovery times
between changes.
Custom User Programs
There are two user programs that provide you with the ability to build
custom program proles for your specic workout requirements. In Custom
User Programs you set the workout time and then for each of the 20
program segments you set the speed and incline. This program is dierent
than our preset programs in that both speed and incline can be controlled
simultaneously. As such, the program matrix display readout will show both
incline and speed at the same time with the incline on the left portion of the
matrix and the speed on the right portion of the matrix.
5k/10k Race
This unique feature allows you to perform a race, or time trial, with the
treadmill timing your performance over these common competitive
distances. The treadmill also helps you by telling you what your nish time is
if you keep running at the same speed. If you start to run faster, you will see
your nish time go down. The treadmill also shows you how far it is to the
nish. Follow the on-screen prompts to enter the required information and
start the race.
19
Page 20
About Your Treadmill
Fitness Tests
Rockport Walking Test
The Fitness Test provides an estimate of your cardiorespiratory tness. It
uses a method called the Rockport test, which is common in the tness
assessment world.
In the Rockport Fitness Test, you walk one mile as quickly as possible, and
your heart rate is measured as you nish. No running or jogging is allowed.
You can use either a heart rate strap (which is preferred), or the contact heart
rate pads on the treadmill.
Follow the on-screen prompts to enter the required information and
properly perform the test.
After the test nishes, the console will tell you both your estimated VO2 max,
or maximum oxygen uptake. This is a common unit of measure in the tness
assessment world. It also tells you where your score rates compared to others
of your age group and gender.
Navy Fitness Test
This test consists of a 1.5-mile distance. The goal is to cover that distance as
quickly as possible. The treadmill lets you know how far you have to go, as
well as the usual total distance so far. At the end of the test, you see your
time for the 1.5 miles; use a separate scoring table (not included) to rate how
you did.
Don’t use this test if you don’t feel comfortable running hard on a treadmill,
or putting out maximal eort on a treadmill.
20
Page 21
About Your Treadmill
Heart Rate Control Programs
Constant Heart Rate
The Constant Heart Rate is a steady state program that lets you select a
single heart rate to maintain throughout your workout. The treadmill will
adjust the belt speed or incline every 10 seconds during the workout to
maintain your heart rate close to the target you’ve selected.
Interval Heart Rate
The Interval Heart Rate is designed to help you increase aerobic endurance
and improve heart rate recovery. This program lets you select a LOW or
recovery target heart rate and a High target. After the 3 minute warm-up the
console will adjust the speed or incline every 10 seconds to maintain your
LOW target for 2 minutes. Then the console will adjust the speed or incline to
raise your heart rate to the high target selected and once again keep it at this
level for 2 minutes. The process will repeat until the end of the workout. It is
recommended that you set the workout time to 30 minutes or higher to use
this program eectively.
Note: Remember that the console needs to receive your heart
rate through the grip pulse or a heart rate chest strap during the
course of the workout.
21
Page 22
About Your Treadmill
Warranty
This LifeSpan treadmill comes with the following limited warranty valid in North
America and the United Kingdom. If you are outside of these areas contact your
local distributor for warranty information or visit www.LifeSpanFitness.com.
Warranty Item
Treadmill Frame
Motor
Parts
Labor
Residential
Lifetime
Lifetime
7 Years
2 Years
Commercial
5 Years
5 Years
1 Years
1 Year
LifeSpan warrants that the equipment it manufactures is free from defects in
materials and workmanship under normal use and services. The periods above
are based on the date of purchase. During these periods, LifeSpan will repair
or replace any defective part. Free labor is included on all parts that are not
normally assembled or replaced by the customer within the labor period.
If within the time frames specied above, any part fails to operate properly,
login to our website at www.LifeSpanFitness.com, click on “Customer Service”
and complete the form to request assistance or call 877.654.3837 option 4 for a
Customer Service Agent (please note that certain kinds of service should only
be performed by a qualied service technician).
LifeSpan reserves the right to make changes and improvements to our products
without incurring any obligations to similarly alter any product purchased.
In order to insure our product warranty and to ensure the safe and ecient
operation of your LifeSpan product, only authorized parts can be used. The
warranty is void if any parts other than those provided by LifeSpan are used.
Exclusions and Limitations:
• This warranty does not apply to any defects caused by negligence, misuse,
improper assembly, or maintenance, accident, or “act of God.”
• This warranty does not apply to discoloration of paints or plastics.
• LifeSpan shall not be responsible for incidental or consequential damages.
• This warranty is non-transferable form the original owner.
Registration
Should you need to process a warranty claim make sure you retain your
purchase receipt to verify the date of purchase and register your LifeSpan
product online. To complete the registration go to www.LifeSpanFitness.com
and select “Product Registration”.
22
Page 23
Proper Grounding
LifeSpan equipment must be grounded. Improper connection of the
equipment’s grounding conductor can result in the risk of electric shock.
Check with a qualied electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug provided
with the product or use a ground plug adapter to adapt to a non-grounded
outlet. If the plug will not t in the outlet, have the proper outlet installed by a
qualied electrician.
Power Cord Options
This treadmill should only be used with the proper power cord and power
outlet. Several power cord options (shown below) are available from LifeSpan.
We do our best do include the correct power cord with the treadmill for your
area. In the event that the correct power cord is not included in the packaging
please contact your local distributor.
Treadmill Outlet
Do not use extension cords between the treadmill and power outlet.
!
Do not plug into a GFI outlet or circuit as it may trip the breaker.
!
CORD SOCKET
SWITCHAC POWER
Power Cord Options
OVERLOAD
SWITCH
23
Page 24
Assembling Your Treadmill
Exploded View
Prior to starting the assembly process take all of the parts out of the box.
Remove plastic bags and lay them out on the oor to become familiar with
the components.
Since your treadmill is a heavy piece of equipment it is recommended you use
two people during assembly and follow these assembly instructions to reduce
any problems that could occur.
24
Page 25
Assembling Your Treadmill
Hardware Included
Item# Part Description Item# Part Description
1 Right Upright Post 6 Right Cup Holder
2 Left Upright Post 7 Left Cup Holder
3 Right Upright Post Cover 8 Cover for Optional
Bluetooth Adapter
4 Left Upright Post Cover 9 Left Arm Post Cover
5 Console 10 Right Arm Post Cover
Hardware Bag Contents
Item # Qty. Hardware Description
N/A 1 6mm Allen Wrench
N/A 1 5mm Allen Wrench w/Phillips Screw Driver
11 4 M10 x 55L Bolt - (Upright Attachment)
12 4 M10 Washer - (Upright Attachment)
13 2 M8 x 100L Bolt - (Handlebar Hold Down)
14 2 M8 Washer - (Handlebar Hold Down)
15 1 Wrench
6mm Allen
Wrench
M8 x 100L
(x2)
5mm Allen
Wrench w/
Phillips
M8 Washer
(x2)
M10 x 55L
(x4)
Wrench
M10 Washer
(x4)
Pre-installed Hardware (not shown)
Item # Qty. Hardware Description
16 4 M8 x 15L Bolt - (Console Attachment)
17 8 M4 x 10L Screw - (Cup Holder Attachment)
M8 x 15L
(x4)
M4 x 10L
(x8)
25
Page 26
Assembling Your Treadmill
Step 1: Unpacking Treadmill
A. Cut packaging straps and
remove.
B. Remove the box top.
C. Remove small parts and
packaging material and
unwrap parts.
D. Cut the corners of the
bottom box and remove all packaging material to begin assembly. The
treadmill can be assembled in the box. No need to pick the treadmill up
to remove it from box.
Step 2: Upright Post Assembly
A. Carefully raise the upright
posts and handlebar assembly.
B. Carefully lay handlebars down
as the uprights are brought
up into position. This will
protect against any accidental
damage to wires coming up
through the upright into the
handlebars.
C. Align the holes in the lower
portion of the upright with
the threaded holes in the
frame.
D. Install the four M10 x 55L
bolts (11) and M10 washers
(12), two in each upright. The
best way to handle this is to
loosely install all four bolts
and washers and then tighten
once all bolts are installed.
M10 x 55L
(x4)
Support
handlebars
as you lift
6mm Allen
Wrench
M10 Washer
(x4)
26
Page 27
Assembling Your Treadmill
Step 3: Upright Post Cover
The upright post covers are pre-attached on each of the posts, but need to
be re-positioned at the base where the upright post meets the frame.
4
A B C
Align and press
A. Slide the left upright post cover (4) down to the motor cover.
B. Gently ex the bottom of the upright cover away from the motor cover
while pushing down to the base of the upright.
C. Align the plug on the inside of the cover with the hole in the upright
post. Firmly press cover in towards the upright base to lock into nal
position.
Step 4: Handlebar Attachment
A. Place the M8 x 100L bolt (13)
and M8 washer (14) through
the left handlebar and into
the uprights being careful not
to damage any wires running
through the handlebar. Repeat
for the right handlebar.
6mm Allen
Wrench
B. Loosely thread both bolts
into the upright prior to
tightening.
M8 x 100L
(x2)
M8 Washer
(x2)
C. Fully tighten both handlebar
attachment bolts.
27
Page 28
Assembling Your Treadmill
A
5
Step 5: Console Harness Attachment
A. Slide the square mounting tubes
(protruding from the front of the
console) (5) partially into the
console mount as shown in the
gure to the left. Do not slide
the console all the way in as wire
connections need to be made.
B. Securely attach the two ribbon
cables (at cables).
NOTE: Plug the ribbon cables
together so that the gold lines
in the ribbon are on the
same side (matching).
28
5B
C3C5 C4
Page 29
Assembling Your Treadmill
C. Securely attach the seven remaining cable connectors – There are
four 2-pin, two 3-pin and one 7-pin connector that will need to be
connected.
1. Attach the 7-pin connectors together (C1) .
2. Attach the wires labeled “SK” together (C2).
3. Attach the White 2-pin connector wires together (C3).
4. Next, attach the two 3-pin connectors (C4) together. There are labels
on these that say L and R. Connect the L to L and the R to R. These
are for the handlebar speed and incline switches.
5. The remaining two 2-pin connectors are for the contact heart rate
sensors and it doesn’t matter which gets plugged into the other.
D. Carefully tuck all wires into the bottom or top console housing.
C1
5BC5 C2C4
29
Page 30
Assembling Your Treadmill
16
Pre-installed
View from beneath
6mm Allen
Wrench
M8 x 15L
(x4)
Step 6: Securing Console
A Slide the console fully into the mounting brackets. If the console does
not want to slide in completely, loosen the four pre-installed M8 x 15L
bolts (16) with the provided 6mm Allen wrench to eliminate any friction.
B. Once the console is fully installed, tighten the four M8 x 15L Bolts.
Step 7: Cup Holder Attachment
A
M4 x 10L
(x4)
A. Remove the four pre-installed M4 x
10L screws (17) with the provided
Phillip’s head screwdriver from the
bottom of the right cup holder.
30
Pre-installed
17
5mm Allen
Wrench w/
Phillips
Page 31
Assembling Your Treadmill
B. Place the right
cup holder (6)
over the handlebar and into the
frame as shown.
C. Loosely install
the two screws
removed in
step A. Once
both screws
are installed,
securely tighten
both screws.
D. Slide Right Arm
Post Cover into
place and install
with two M4x10L
screws.
E. Repeat steps A
through D for
installing the Left
Cup Holder (7)
and Left Arm Post
Cover (9).
B
7
6
C
17
M4 x 10L
(x2)
5mm Allen
Wrench w/
Phillips
D
17
M4 x 10L
(x2)
5mm Allen
Wrench w/
Phillips
31
Page 32
Assembling Your Treadmill
Step 8: Time and Date
It’s important that the date and time be set on the console so that your
exercise data can be time stamped. Please go to the Time Setting section on
(page 35) prior to using your treadmill.
Console Basics
Readout Display
A blue backlit 6.5” LCD display provides all the information you need to
monitor your exercise results and get the most out of your exercise program.
A. Message Window - This 16-character window helps step you through
program setup, then displays the program selected while you exercise.
Pace, shown in minutes and seconds per mile or kilometer, is shown in
the Message Window every time speed changes. Total feet climbed or
descended is shown in the Message Window every ve minutes.
B. Program Matrix - Divides the workout programs into 20 segments
with varying intensity levels. These programs can be viewed in levels of
incline or speed.
C. Time - The workout time elapsed or the workout time remaining.
D. Incline - The level of belt incline ranging from -3 to 13.
E. Speed - The speed you are traveling in miles per hour (this reading can
be changed to kilometers by using the Personal Settings Mode).
32
Page 33
Console Basics
F. Calories - Estimated calories burned is calculated by using a widely-
accepted equation, using body weight and distance covered.
G. Distance - Total distance traveled in miles or kilometers since the
beginning of the workout.
H. Step Count -Works like a pedometer, counting your steps while
you walk.
I. Heart Rate - Your measured heart rate using the hand pulse sensors
located on the front handlebars or chest strap.
J. Date - The date is presented as the month/day/year below the program
matrix.
K. Time - The time of day is shown below the program matrix using a 24-
hour reading.
L. Indicator icons:
USB - This will light up when your exercise data is being transferred
to a USB ash drive.
Bluetooth - Flashes when pairing with a mobile device.
HRC - This icon ashes when your pulse is being taken.
CAUTION: The Intelli-Guard feature will automatically be disengaged
!
when the treadmill is operated at speeds under 1.0 mph (1.6 kph). If
the speed is within this parameter “Step” will ash. When the “Step”
is ashing, the treadmill will not automatically pause. If the speed is
above 1.0 mph (1.6 kph) Intelli-Guard™ will not activate until 25 steps
are taken and counted.
CAUTION: At 20 seconds the console will beep once per second
!
for 5 seconds and then automatically pause the treadmill. These
beeps are a notice that the treadmill belt is about to stop. If for some
reason you are still on the treadmill when this occurs move your feet
to the side rails and prepare for the belt to stop. The Intelli-Guard
feature does not replace the use of your Safety Key or using proper
precaution in stopping the treadmill when it is not in use.
33
Page 34
Console Basics
Main Keyboard
A. Program Group - Choose from HRC (Heart Rate Control), Healthy Living,
Sport Training, Weight Loss, and User Set Up.
B. Bluetooth - Pairs Bluetooth to your mobile device.
C. Fitness Tests - Rockport Walking Test and Navy Fitness Test.
D. QuicksetTM Incline - Select an incline level of 2, 4, 6, 8 or 10.
E. Incline - Raise and lower the running belt incline.
F. Enter - Conrm a selection.
G. Stop/Reset - The Stop button will pause your workout. Holding it for 3
seconds will also clear the workout and reset saved exercise data.
H. Start/QuickSTART - Begin a Manual Program with one touch.
I. Speed - Increase or decrease belt speed.
J. QuicksetTM Speed - Select a speed of 2, 4, 6, 8, 10 mph (2, 4, 6, 8, 10 kph).
Top Keyboard
A. Power – This button can be used to turn the console “on” from Energy
Saving mode and to turn the console “o” when in Standby mode.
B. Exercise Data Save - This saves your workout results to a USB ash drive.
NOTE: Make sure the main on/o switch, located at the front
Note: Make sure the main on/o switch, located at the
of the treadmill base (near the oor) is on.
front of the treadmill base (near the oor) is on.
34
Page 35
Getting Started
Setting the Date and Time
Before getting started using your treadmill make sure the date and time
are properly set on the console to ensure that your exercise data is properly
recorded.
To set the date and time in your console follow these steps:
A. Pull and re-install the safety key.
B. Press the Quick Speed 10 button. Clock illuminates in the display.
C. Press the Quick Speed 10 button again. Update Calendar illuminates in
the display after 3 seconds. Press Enter.
D. Press the +/- buttons to set the correct Year. Press Enter.
E. Press the +/- buttons to select the correct Month. Press Enter.
F. Press the +/- buttons to select the correct Day. Press Enter.
G. Press the +/- buttons to set the Hour. Press Enter.
H. Press the +/- buttons to set the Minute. Press Enter.
QuickSTART
The quickest way to get started with a workout is to press the QuickSTART
button. This will start the treadmill in manual mode with the time counting up
from 00:00. You can also set a desired workout Time and update your Weight
in the console for more accurate calorie calculation by following these steps:
A. Press Enter to select manual mode.
B. Select the amount of time (in minutes) you want to use the manual
program by pressing the speed +/- buttons. Press Enter.
C. Use the speed +/- buttons to set your weight. Your weight is used to
more accurately calculate calories burned. Press Enter.
D. Press Start and the treadmill will start with the time counting down from
the preset time.
E. To increase speed press the + button. The speed will increase up to
13.5 mph (22 kph) on the TR6000i.
35
Page 36
Using Programs
There are numerous programs available to help you add structure and variety
to your exercise program. For more information about these programs please
refer to the About Your Treadmill section of this Owner’s Manual. To use one
of the Preset Programs follow the steps below:
A. Select Program – Press the + / - buttons on the keyboard to cycle
through the program list, or use the Program Buttons to nd your
desired program then press Enter to complete the selection.
B. Select Speed or Incline Mode – You can choose to run each program in
either Speed or Incline mode. Press the +/- buttons on the keyboard to
make your selection and then press Enter.
C. Set Program Level – There are 3 levels of intensity with each preset
program (1 being the easiest and 3 being the most dicult). Press the
Speed +/- buttons to select the desired level then press Enter.
D. Set Time – Set the program Time of your workout by pressing the Speed
+/- buttons then press Enter.
E. Set Weight – Set your Weight in the console for more accurate calorie
calculation by pressing the Speed +/- buttons then press Enter.
F. Press the Start button to begin your workout.
Custom User Set-up Programs
There are 2 user programs that provide you with the ability to establish
customized program proles specic to your workout requirements. Once
these programs are completed they are saved by the console and can be
selected like any other preset program. Complete the following steps to set
up a user program:
A. Select USER1 or USER2 Programs – Press the Speed +/- buttons to
select the USER1 or USER2 programs then press Enter.
36
Page 37
Using Programs
B. Set Time – Set the program Time of your workout pressing the Speed
+/- buttons then press Enter.
C. Set Weight – Set your Weight in the console for more accurate calorie
calculation by pressing the Speed +/- buttons then press Enter.
37
Page 38
Using Programs
D. Set Level – Use the Incline up/down buttons to set the incline level of
the rst program segment and the Speed +/- buttons to set the desired
speed of the rst program segment. You can also use the Quickset™
buttons for Incline and Speed to expedite the process. Press Enter.
E. Repeat – Repeat Step D until the 20 segments are complete. The
twentieth segment will be shown in the Time window as shown below.
38
Page 39
Using Programs
Once the program has been set up, simply scroll to the USER1 or USER2
program and press Start. Both Incline and Speed are shown in the program
matrix with the Incline on the left and the Speed on the right.
39
Page 40
Using Programs
Using Heart Rate Control Programs
Two heart rate control programs are available on your console: Constant and
Interval. When using these programs the console will need to receive your
heart rate throughout the entire
workout. Please review the Heart Rate
Monitoring section of this Owner’s
Manual for more information.
HRC – Constant
The Constant program lets you select a single heart rate that you want to
maintain throughout your workout and the treadmill will maintain this heart
rate for you by either adjusting the speed or incline.
After selecting the Constant Heart Rate program the next selection option
will be Incline Mode or Speed Mode. Select which mode you prefer and the
treadmill will adjust the speed or incline every 10 seconds to keep you at your
selected heart rate level. For instance, if you select the incline mode, there
will be a 3-minute warm-up and then the incline will start to adjust each 10
seconds to obtain and maintain your target heart rate. You choose the speed
that you want the belt to run and the treadmill will control the incline.
To use this program:
A. Select HRC Constant – Press the Speed +/- buttons to select the HRC
Constant program, then press Enter.
B. Select Program Mode – Select either the Incline Control Mode or the
Speed Control Mode by pressing the Speed +/- buttons, then press Enter.
C. Set Time – Set the program Time by pressing the Speed +/- buttons then
press Enter. The program will include 3-minutes of warm up.
D. Set Weight – Enter Weight by pressing the Speed +/- buttons, then press
Enter.
E. Set Age – Enter Age by pressing the Speed +/- buttons, then press Enter.
F. Set Target Heart Rate – Set your target heart rate by pressing the Speed
+/- buttons then press Enter.
G. Press the Start button to begin your workout.
40
Page 41
Using Programs
HRC – Interval
The Interval program is designed to help you increase your aerobic endurance
and improve heart rate recovery. This program lets you select a Low (or
recover target heart rate) and a High target. After a 3-minute warm-up the
console will adjust the speed or incline, which ever you select, every 10
seconds to maintain your Low target for 2 minutes. Then the console will
adjust the speed or incline to raise your heart rate to the High target that you
selected and once again keep it at this level for 2 minutes and then repeat
the process until the end of the workout. It is recommended that you set the
workout time to 20 minutes or higher to use this program eectively.
To use this program:
A. Select HRC Interval – Press the Speed +/- buttons to select the HRC
Interval program then press Enter.
B. Select Program Mode – Select either the Incline Control Mode or the
Speed Control Mode by pressing the Speed +/- buttons then press Enter.
C. Set Time – Set the program Time by pressing the Speed +/- buttons then
press Enter. The program will include 3 minutes of warm-up.
D. Set Weight – Enter Weight by pressing the Speed +/- buttons, then press
Enter.
E. Set Age – Enter Age by pressing the Speed +/- buttons, then press Enter.
F. Set High Target Heart Rate – Set your High Interval training rate by press-
ing the Speed +/- buttons, then press Enter.
G. Set Low Target Heart Rate – Set your Low Interval training rate by press-
ing the Speed +/- buttons, then press Enter.
H. Press the Start button to begin your workout.
WARNING: Heart rate monitoring may be inaccurate. Over exercising
!
may result in serious injury or death. If you feel faint stop exercising
immediately.
41
Page 42
EMERGENCY STOP
Saving Your Results
There are 2 ways to save your exercise results when using your treadmill. The
rst is using the USB port built into your console and your own USB drive and
the second is using the Bluetooth adapter and either the Active Trac or Train
& Trac app. Once Saved, use the LifeSpan Club to consolidate and compare all
your results.
LifeSpan Club
Your treadmill includes a free membership to the LifeSpan Club. This
membership number is located on the front cover of this Owner’s Manual.
With this account you can consolidate all your exercise results in one place,
track your weight and other metrics and get more information about your
health and tness.
If you plan on using:
• A USB drive to save your exercise results, download the IDC app from
your LifeSpan Club account. This app works with your Windows or Mac
computer letting you upload your exercise results from your USB ash
drive into your LifeSpan Club account.
• A LifeSpan app visit www.LifeSpanFitness.com for a list of the available
apps and which mobile devices are supported.
Bluetooth Adapter
When paired with LifeSpan’s optional Bluetooth adapter, your treadmill
can connect with your mobile device to wirelessly sync all of your exercise
history to your LifeSpan Club account. To learn more about which apps are
available and mobile devices supported visit www.LifeSpanFitness.com.
To enable this feature, go to LifeSpanFitness.com
to purchase the Bluetooth Adapter.
42
Page 43
EMERGENCY STOP
Saving Your Results
USB Plus
Your LifeSpan treadmill saves a record of your exercise for up to 2 hours.
All you need is a standard USB drive. Almost any brand or model will work.
Remember, it’s important that you Set the Date and Time (page 33) on your
treadmill console rst so your exercise results are accurately date and time
stamped.
You can insert the USB drive, into the USB Plus port anytime during your
workout or after you’ve stopped or paused the treadmill. Just insert a drive
and press the “save” button. You can also charge your phone or other mobile
device while you exercise and then remove the device you’re charging and
replace it with the USB drive to save your data.
When you Stop or Pause a workout or when your workout time ends, the
console will prompt you to “Insert Drive” if you haven’t already done so.
If there is already a USB drive installed or if you install a USB drive after
stopping the treadmill, the console will automatically save your workout
data and a message “Workout Saved” will show on the display. You can also
press the “Save” button anytime and any data currently saved in the console’s
internal memory will be saved to the USB drive.
If however, the treadmill goes into Energy Savings mode at any time without,
your exercise results rst being saved onto a USB drive your exercise data will
be cleared from the consoles internal memory.
*Charging feature does not work with the iPad 1, iPad 2, or iPad 3.
USB drive not included.
43
Page 44
Maintenance and Tips
Personal Settings
The TR6000i come with the ability for you to personalize several console
settings including:
Intelli-Guard™ - This feature is triggered when the treadmill senses you are
no longer walking or running. For safety purposes it automatically pauses
the belt to avoid accidental falls resulting in possible injury. There are several
factors that aect the accuracy of this feature including your walking style,
weight and usage characteristics. While we don’t recommend it, this feature
can be turned o if required.
English or Metric - Used for both Speed and Distance in miles or kilometers
shown on the display.
Calendar - Date and Time are shown on the display readouts, but can be
turned o with this setting. We recommend you keep date and time turned
on to accurately track your results.
Energy Savings - Turn the Energy Saving feature ON or OFF.
Pause Time - The number of seconds the treadmill will pause before going
into sleep mode. This feature can also be turned o entirely.
Audible Beep - Turns o the audible alert that beeps for speed and incline
changes or when the treadmill is starting or stopping.
WARNING: The audible alert is turned on from the manufacturer to warn the
user that the treadmill is starting or the speed is changing. Turning this alert
!
o is done at the sole discretion of the user.
Resume Speed: This lets you start the treadmill at the speed it was going
when paused.
Warm up / Cool down: The warm up/cool down feature defaults to ON. If
you would prefer to never see this feature, set this setting to OFF.
44
Page 45
Maintenance and Tips
Personal Settings
Follow the steps below to make changes to the Personal Settings options.
Conguration Steps Information Displayed
Press and hold STOP and then SPEED + for 3 seconds to
enter Personal Settings Mode. The rst screen shows the
software version for your console.
Press ENTER to continue
Press SPEED +/- to turn Intell-Guard™ on and o.
Press ENTER to continue
Roller Size is displayed. (Do not modify)
Press ENTER to continue
Press SPEED + / - to change from English (EN) to Metric
(SI).
Press ENTER to continue.
Press Speed +/- to turn Calendar on or o.
(Do not modify)
Press ENTER to continue
Press SPEED +/- or to turn Energy Saving mode on or o.
Press ENTER to continue
This screen shows the Total Distance exercised in miles
or kilometers.
Press ENTER to continue
This screen shows Total Hours of use.
Press ENTER to continue
Press SPEED +/- to set the amount of Pause Time
required before the treadmill resets. The options in
seconds are 90,180, 300 or O.
Press ENTER to continue
Press Speed +/- to turn Audible Beep on or o.
Press ENTER to continue
Press SPEED +/- Resume Speed allows the treadmill to
start at the speed it was running when paused. (If set to
0, the treadmill will start at .5 mph. If set to 1, the treadmill will start at the pre-paused speed.)
Press ENTER to return to normal console operations
Controls whether the warm up/cool down feature is
enabled.
Engineering Mode
10 49
15
17. 7.2014
Intelli-Guard On or O
Roller
600
Select the units
EN or SI
Set Calendar On or O
Electricity On or O
Total Distance
0 000
Total Hours
0 000
Select the pause time
90, 180, 300 or O
Beep On or O
Resume Speed 0 or 1
Warm / Cool On or O
45
Page 46
Maintenance and Tips
Daily Cleaning
It is recommended to wipe the treadmill down after each use to keep the
treadmill clean and dry. A mild detergent may be used at times to help
remove all dirt and salt from the belt, painted parts and the display.
Monthly Cleaning
This cleaning would include removing the motor cover and cleaning
around the motor and electronics. It is recommended to clean the motor
compartment if the treadmill is in an area where there might be plush carpet
bers that could get pulled up into the motor compartment. It is a good
idea at this time to check and tighten all assembly hardware, power cord for
damage, or anything else that would indicate the need for service.
Safety and Integrity
The safety and integrity designed into the machine can only be maintained
when the treadmill is regularly examined for damage and repaired. Worn
or damaged components shall be replaced immediately or the treadmill
be removed from service until the repair is made. Pay special attention to
components most susceptible to wear.
WARNING: Keep treadmill stable on at ground.
!
Over-exercising or inadequate training may result in physical injury.
!
WARNING: Unplug the power cord before removing the motor cover.
IMPORTANT: If service is required, turn the power o and remove the
power cord to ensure the unit cannot be used. Let all other users know
the unit needs service.
CAUTION: Acidic cleaning detergents may damage painted or powder
coated surfaces and should not be used. Such cleaners may void the
LifeSpan warranty.
46
Page 47
Maintenance and Tips
Belt Lubrication
Use only 100% silicone and avoid using aerosol silicone sprays which include
additives and petroleum distillates. One ounce of silicone should be used for
each application. LifeSpan oers 100% silicone lubricant that can be ordered
at www.LifeSpanFitness.com.
Apply the silicone to the underside of the treadmill belt. Do not apply to the
walking surface. This may be accomplished by simply lifting the belt up over
the side rails and spraying the lubricant under the running belt onto the deck
surface. The silicone will absorb into the underside of the belt as you start
walking.
NOTE: When lubricating the belt, make sure the treadmill is on a surface
that can be easily cleaned. After lubricating your treadmill running belt,
clean any excess silicone o the walking surface of
the belt and side rails.
.
For a full video demonstration on the lubing your treadmill go to the FAQ
section at www.LifeSpanFitness.com.
47
Page 48
Maintenance and Tips
Belt Tensioning
If the belt begins to slip and needs to be tensioned, there are tension bolts
that are accessible from the back of the treadmill. Before tensioning the belt,
start the treadmill and set the speed to 3 mph (5 kph).
A. Using a 6 mm Allen wrench, included in your hardware bag, turn the
right and left tension bolts 1/2 turn clockwise.
B. Test to see if the slipping is eliminated. If the belt slips repeat step A and
test again.
Note: Adjusting one side more than the other will cause the belt to
drift to the side of the treadmill and will require belt alignment. Check
to be sure the running belt is still aligned. If belt alignment is o as
shown below refer to Belt Alignment section.
Turn both
Clockwise
to Tighten belt
Turn both
Counter-clockwise
to Loosen belt
CAUTION: DO NOT tighten more than 2 full turns on each side.
Over tensioning the belt can cause unnecessary friction and wear
and tear on the belt, motor and electronics.
Belt Alignment
A. Press Start, then increase the treadmill speed to 3 mph (5 kph).
B. Stand at the rear of the treadmill to see which way the belt is drifting.
C. If the belt drifts to the left, turn the left adjustment bolt one-quarter
turn clockwise and the right adjustment bolt one-quarter turn counterclockwise. (See FIG. 1)
D. If the belt drifts to the right, turn the left adjustment bolt one-quarter
turn counter-clockwise and the right adjustment bolt one-quarter turn
clockwise. (See FIG. 2)
E. Observe the tracking for two minutes. Repeat steps A-D as needed.
48
Page 49
Belt Alignment (continued)
Maintenance and Tips
To move belt to the Right
Figure 1
To move belt to the Left
Figure 2
Visit www.LifeSpanFitness.com for a full video demonstration on the aligning
your treadmill belt.
Leveling The Running Deck
A. Loosen the locking nut with the Wrench (15)
B. With your hand adjust the leveling foot until it sits snug on the oor.
C. Tighten the locking nut with the Wrench.
Wrench
49
Page 50
Maintenance and Tips
Moving the Treadmill
1. Make sure the ON/OFF switch is turned OFF and the power cord is removed from the wall.
2. Make sure nothing is on or near your treadmill which might spill, be
knocked o, or prevent the treadmill from moving.
3. Place both hands under the support bar located under the back of the
running belt to make sure you have a solid lifting point.
4. Lift the back of the treadmill and roll to the desired location.
CAUTION: When lifting, use proper safety precautions and lifting
techniques. Bend your knees and elbows, keep your back straight
and pull up evenly with both arms.
50
Page 51
Maintenance and Tips
Troubleshooting
If you have a question that isn’t answered in this Owner’s Manual, visit our website
at www.LifeSpanFitness.com or call us at 877.654.3837 option 4.
The treadmill is designed and manufactured to be reliable and easy-to-use.
However, if you have a problem, these troubleshooting steps may help you
nd the cause.
Problem: The console does not turn on or function correctly.
Solution: Check to make sure the treadmill is properly plugged in, turn the
power switch down by the power cord o and back on again and make sure
the safety key is in place. Check all wire harness connections made during
assembly to be sure they are all properly connected. If the problem persists
contact LifeSpan Customer Service at www.LifeSpanFitness.com or call
877.654.3837 option 4.
Problem: The POWER button on the console does not turn the console on.
Solution: Check the main power switch and power cord located at the front of
the treadmill on the right side. Make sure the power cord is plugged in and
the power switch is turned on.
Problem: The treadmill does not turn o with the console power button.
Solution: The console has to be in standby mode to be turned o with this
button. Press and hold the Stop button till the console resets and then the
POWER button will turn the console o.
Problem: The belt does not stay in the center of the treadmill when in use.
Solution: First check to make sure that the treadmill is level, then refer to the
instructions in this Owner’s Manual on how to align the belt.
Problem: The treadmill belt slips during use.
Solution: The belt may need to be tensioned after a period of use. Refer to the
Belt Tensioning Section of this Owner’s Manual.
Problem: Heart rate is erratic or not reading.
Solution: Make sure your hands are moist (Aloe Vera helps). Make sure all
connectors made during assembly, at the back of the console, are properly
connected and no wires are damaged. If wearing a chest strap, be sure the
batteries are good and that the electrodes are moist and positioned properly
on your chest.
51
Page 52
Maintenance and Tips
Problem: Treadmill automatically pauses during workout.
Solution: The treadmill is not detecting your steps because you have stopped
walking or because the user weight is too low to detect the steps, especially
at an incline. One option would be to go to personal settings and turn IntelliGuard o.
Problem: E1 Error Code after 3 to 8 seconds.
Solution: This is most likely a bad wire connection or a speed sensor issue.
Check all wire connections made during assembly and if this does not resolve
the issue contact LifeSpan Customer Service at www.LifeSpanFitness.com or
call 877.654.3837 option 4.
Problem: E1 Error Code after several minutes of use.
Solution: This problem usually occurs when there is too much friction building
between the running belt and deck. The best thing to do is turn the treadmill
o, lubricate the running belt and turn the treadmill back on. Test the unit.
If E1 still comes up after testing, contact LifeSpan Customer Service at
www.LifeSpanFitness.com or call 877.654.3837 option 4.
Problem: E6 Error Code.
Solution: Turn the power o for 30 seconds and back on again. Check to see
if the incline is functioning. If still an issue, please check all wire connections
made during assembly and cycle the power again. If still not functioning
contact LifeSpan Customer Service at www.LifeSpanFitness.com or call
877.654.3837 option 4.
52
Page 53
LifeSpan Fitness
P.O. Box 981316
Park City, Utah 84098-1316
Phone: 877.654.3837
www.LifeSpanFitness.com
TR6000i
Version 1.0
Light Commercial Treadmill
Loading...