Page 1
HAMMER STRENGTH EQUIPMENT
Left Frame
Right Frame
Front Cross
Member
Movement
GBTL - Ground Base Twist Left
Front Cross
Member
Sub Assy
Exploded
Assembly
Front Upright
Frame
Arm
1 of 8
Page 2
HAMMER STRENGTH EQUIPMENT
Right Side Frame Assembly
Left Pull Movement Arm Assembly
GBTL - Exploded Assembly
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 GBTL-CFX-0 Front Frame Assembly
2 1 GBTL-CSFL-0 Left Side Frame Assembly
3 1 GBTL-CSFR-0
4 1 GBTL-CHX-0 Front Upright Assembly
5 1 GBTL-CTX-0 Front C-Mem Assembly
6 1 GBTL-CMAL-0 Left Movement Arm Assembly
7 1 GBTL-CMALP-0
8 12 WASH.5STAR 1/2" Internal Lock Washer
9 11 NUT.5LOCK 1/2" Thick Lock Nut
10 10 H-BACK-WASH Backing Washer
11 11 HHB.5X3 1/2 X 3 Bolt
2 of 8
Page 3
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
Left Side Frame
1/2" Internal Lock Washer
GBTL - Left Side Frame
ITEM NO. QTY. PART NO.
1 1 GBT-SFL-0
2 1 H-BUMP-LGE MM1 Large
3 6 WASH.5SAE 1/2" SAE Flat Washer
4 5 NUT.5LOCK 1/2" Thick Lock Nut
5 5 WASH.5STAR
6 2 HHB.5X5 1/2 X 5 Bolt
7 8 H-HPLUG 9/16" Hole Plug
8 2 H-BEAR-SML Small Bearing
9 4 HHB.5X1.5 1/2 X 1 1/2 Bolt
10 4 NUT.5JAMLOCK 1/2" Thin Lock Nut
11 3 H-BACK-WASH Backing Washer
12 3 HHB.5X3 1/2 X 3 Bolt
13 3 STAY CLEAR Stay Clear Decal
14 1 SERIAL NUMBER Serial Number
15 1 GBT-WB-0 Workbox
3 of 8
Page 4
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
1/2" Internal Lock Washer
GBTL - Right Side Frame
ITEM NO. QTY. PART NO.
1 1 GBT-SFR-0 Right Side Frame
2 1 H-BUMP-LGE MM1 Large
3 6 WASH.5SAE 1/2" SAE Flat Washer
4 5 NUT.5LOCK 1/2" Thick Lock Nut
5 5 WASH.5STAR
6 2 HHB.5X5 1/2 X 5 Bolt
7 8 H-HPLUG 9/16" Hole Plug
8 2 H-BEAR-SML Small Bearing
9 4 HHB.5X1.5 1/2 X 1 1/2 Bolt
10 4 NUT.5JAMLOCK 1/2" Thin Lock Nut
11 3 H-BACK-WASH Backing Washer
12 3 HHB.5X3 1/2 X 3 Bolt
13 3 STAY CLEAR Stay Clear Decal
14 1 GBT-WB-0 Workbox
4 of 8
Page 5
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
Left Movement Arm
1 1/2 X 3 End Cap
GBTL - Movement Arm
ITEM NO. QTY. PART NO.
1 1 GBT-MAR-0 Left Movement Arm
1 1 GBT-MAL-0
2 2 ACCORDIAN Shaft Guard
3 2 H-BENDCAP Bullet Cap
4 1 H-RUBRNG MM5 Ring
6 3 H-PEND3
7 1 H-GRIP(GBTLR-A00) HandGrip
8 3 H-HPLUG 9/16" Hole Plug
9 1 H-NAMEPLATE Name Plate
11 1 SELECTOR PIN-4 SELECTOR PIN 4 INCH
12 1 STAY CLEAR Stay Clear Decal
5 of 8
Page 6
HAMMER STRENGTH EQUIPMENT
ITEM NO.
PART NO.
DESCRIPTION
Front C-member
1 1/4 X 9 Nonskid
GBTL - Front Cross Member
QTY.
1 1 GBT-TX-0
2 2 H-NONSKID1
6 of 8
Page 7
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
Front Upright Frame
GBTL - Front Upright Frame
ITEM NO. QTY. PART NO.
1 1 GBT-HX-0
2 3 H-PEND2 1 1/2 X 2 Endcap
3 2 H-BENDCAP Bullet Cap
7 of 8
Page 8
HAMMER STRENGTH EQUIPMENT
PART NO.
DESCRIPTION
Front C-mem SubAssembly
GBTL - Front Cross Member Sub Assembly
ITEM NO. QTY.
1 1 GBT-FX-0
2 2 H-PEND3 1 1/2 X 3 End Cap
8 of 8
Loading...