HAMMER STRENGTH EQUIPMENT
GBHP – Ground Base Hi gh Pull
Customer Support Services
PARTS MANUAL
1Page 1 of 9
HAMMER STRENGTH EQUIPMENT
NOTES:
2Page 2 of 9
HAMMER STRENGTH EQUIPMENT
TABLE OF CONTENTS
EXPLODED ASSEMBLY..................................................................................................4
CENTER BRACKET .........................................................................................................5
FRONT CROSSMEMBER.................................................................................................6
LEFT MOVEMENT ARM...................................................................................................7
LEFT SIDE FRAME...........................................................................................................8
TOP CROSSMEMBER......................................................................................................9
PAGE
3Page 3 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Exploded Assembly
ITEM NO.QTY.PART NO . DESCRIPTION
1 1 GBHP-CFX-0 Front Crossmember A ssembly
2 1 GBHP-CSFR-0 Right Side Frame Assembly
3 1 GBHP-CSFL-0 Left Si de Frame Assembly
4 1 GBHP-CTX-0 Top Crossmember Assembly
5 2 GBHP-BX-0 Bottom Crossmemb er Assembly
6 1 GBHP-CETC2-0 Center Brack et Assembly
7 1 GBHP-CMAL-0 Left Movement Arm Assembly
8 1 GBHP-CMAR-0 Right Movement Arm Assembly
9 12 H-BACK WASH Backing Washer
10 12 HHB.5X3 1/2 X 3 Bolt
11 4 HHB.5X4.5 1/2 X 4 1/2 Bolt
12 22 WASH. 5STAR 1/2" Internal Lock Washer
13 18 NUT.5LOCK 1/2" Thick Lock Nut
14 2 HHB.5X4 1/2 X 4 Bolt
15 4 SELECTOR PIN-4 SELECTOR PIN 4 INCH
4Page 4 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Center Bracket
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP-ETC2-0 Ce nte r Brack et
2 2 H-BUMP-MED MM2 Medium
3 4 WASH.5STAR 1/2" Internal Lock Washer
4 2 HHB.5X3.5 1/2 X 3 1/2 Bolt
5 2 HHB.5X3 1/2 X 3 Bolt
6 4 WASH.5SAE 1/2" SAE Flat Washer
7 4 NUT.5LOCK 1/2" Thick Lock Nut
5Page 5 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Front Crossmember
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP -FX-0 Front crossmember
2 2 H-BENDCAP Bullet Cap
3 2 H-RUBRNG MM5 Ring
4 1 H-NAMEPLAT E Name Pl ate
5 1 GROUND BASE HIGH PULL Produc t Dec al
6Page 6 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Left Movement Arm
Note: L E FT SI D E sho wn. RIG HT S ID E m ir r o r image.
Do Not put Warnin g LARGE-H on CMAR-0.
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP-MAL-0 Left Mo vement Arm
2 2 ACCORDIAN Shaft G uard
3 3 H-BENDCAP Bullet Cap
4 2 H-RUBRNG MM5 Ring
5 2 H-PEND3 1 1/2 X 3 End Cap
6 1 WARNING LARGE-HLarge Warning Hor
71H-GRIP(GBSL-A00)HandGrip
82H-GRIP HandGrip
7Page 7 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Left Side Frame
Note: LEFT SIDE shown. RIGHT SIDE mirror image.
Do Not put Patent on CMAR-0
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 GBHP-SFL-0 Left Side Frame
2 4 H-BACK WASH Backing Washer
3 2 H-HPLUG(REG) Hole Plug
4 2 H-PEND3 1 1/2 X 3 End Cap
5 4 HHB.5X3 1/2 X 3 Bolt
6 2 H-BEAR- SML Small Beari ng
7 4 NUT.5LOCK 1/2" Thick Lock Nut
8 2 STAY CLEAR Stay Cle ar Decal
9 1 PATENT Patent Decal
10 1 SERIAL NUMBER Serial Number
8Page 8 of 9
HAMMER STRENGTH EQUIPMENT
Ground Base High Pull
GBHP – Top Crossmember
ITEM NO.QTY. PART NO. DES CR IP T I ON
1 1 GBHP - TX -0 To p Cr os sm em b er
2 2 H- BUMP-MEDMM2 Medium
3 4 WASH.5SAE 1/2" SAE Flat Washer
4 2 WASH.5STAR1/2" Internal Lock Washer
5 4 STAY CLEAR Stay Clear Decal
62NUT.5LOCK1/2" Thick Lock Nut
7 2 HHB.5X3.5 1/2 X 3 1/2 Bolt
9Page 9 of 9
Loading...