435101
425 LEG PRESS AD.M~TER KIT
ASSEMBLY INSTRUCTIONS
SORT AND COUNT ALL PARTS BEFORE BEGExrNING ASSEMBLY
HARDWARE."
ITEM
I.
2.
3.
4.
6.
7.
8.
9.
I0.
11.
12.
13.
14.
15.
16.
17.
NAME.DESCRIPTION
1/2 X 3 LN. BOLT .: ......................
3/8 X 4-I/2 IN. THREAt)E,D SHAFT ............................................................................................................
.318 IN. WASHER ...........................................................................................................................................
1/2 IN. WASHE~, ........................................................................................................................................... 2
1/2 IN. LOCK I,~T ....................................................................................................................................... 4
3/8 IN. LOCK NUT ....................................................................................................................................... 3
3/8 IN. NLrT ...................................................................................................................................................
ICEYHOLE CLEVIS .....................................................................................................................................
SWIVEL ......................................................................................................................................................... I
2-318 IN. CABLE i~-TA~-NINC- CLIP ............................................................................................................
QUICK DISCONNECT LII~YK. ....................................................................................................................... I
I/4 IN. CAP NUT .............................................................................................................................................
2 SQ. EI,,rD CAP .................................................................................................. ; ..........................................2
SHOCK COILD ...............................................................................................................................................
2 IN. PULLEY ................................................................................................................................................ I
3=~.12 X I IN. PULLEY ...................................................................................................................................
318 X 2 IN. BOLT ........................................................................................................................................... 2
~ .......................................................................................................~ .........
QTY
4
2
I
." !
2
I
NOTE: BOLT LENGTI~t IS MEASURED FRO~~. THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH
BOLT LENGTH RULER:
0
1 4 5
6
1
12/’21~5
NOTE:
IF THE REAR SHROUD IS ASSEMBLED TO THE PARABODY 425, IT WILL NEED "]70 BE REMOVED TO
ASSEMBLE THE LEG PRESS AND THE ADAPTER KIT. PLEASE REMOVE THE SE[ROUD AT THIS TIME
BY REMOVING THE FOUR (4) 3/8 X 1 IN. BOLTS AND FOUR 3/8 IN. WASHERS.
NOTE:
THE LEG PRESS ATTACHMENT (832101) MUST BE ASSEMBLED BEFORE ASSEMBLING IT TO THE
PAKABODY 425. PLEASE ASSEMBLE THE LEG PRESS ATTACttMENT AT TIIIS TfME USING THE 832
PRODUCT ASSEMBLY INSTRUCTIONS.
1. Attach O, vo (2) 2 SQ. IN. COVER CAPS onto the FRONT LEG WELDMENT as shown on drawing.
Remove two (2) I/2 FN’. LOCK NUTS and two (2) 1/2 IN. WASHERS FROM the PRESS BASE: \ 13ASE connection of the
425.
SECURELY assemble the BASE CONNECTION WELDMENT to the PRESS IIASE and BASF, connection of the -12S
using the two (2) I12 IN. LOCK NUTS REMOVED IN STEP
o
SECURELY attach the assembled 832 LEG PRESS ATTACHMENT to the FRONT LEG ~rELDMENT using two (2)
I/2 X 3 IN. BOLTS, two (2) I/2 IN. WASHERS (~To, OMS’[’EP 2) and two (2) I/2 IN. LOCK NUTS.
SECURELY attach the 832 to the 425 by connecting the FRONT LEG WELDMENT to the BASE CONNECTION
WELDMENT, using two (2) I/2 X 3. IN. BOLTS, two (2) 112 IN. WASHERS and two (2) I/2 IN. I_,OCK
Remove one (I) 1/4 .IN. CAP NUT from the rear L-hook of the TOP BOOM. (LEAVE 2 IN. PULLEY ON L-HOOK)
Assemble one (I) 2 IN. PULLEY to the rear L-hook and secure place ~vith one (I) 114 IN. CAP
CAREFULLY remove one (I) 318 IN. LOCK ~ and one (I) SWIVEL WITH MULTI-PRESS SHOCK CORD from
rear fiat of the BASE.
I0.
11.
12.
13.
o
Remove one 3/8 IN. NUT, one (I) 2-3/8 IN. CABLE RETAINING CLIP, one (1) 3-I/2 X 1 IN. PULLEY, one (1) Y/8
1/2 IN BOLT, and one (1) 3/8 IN. WASHER from the rear flat ofthe BASE.
Reassemble one (I) 3-112 x I IN. PULLEY, one (I) 2-318 IN. CABLE RETAINING CLIP, one 318 WASI-IF_R, and one
(I) 318 IN. NUT, from Step 9 to the rear fiat of the BASE using one (I) 318 x 4-I/2 IN. THREADED STUD, and one (1)
318 IN. NLIT.
Reassemble one (1) SWIVEL WITH MULTI-PRESS SHOCK CORD to the 3/8 X 4-1/2 IN. TI-tl~AI)ED STUD, using
(I) 318 IN. LOCK Nq.JT. (PARTS ARE FROM STEP 8)
Assemble one (1) 3-1/2 x I IN. PULLEY to the flat facing the leg press on the BASE, and one (1) 3-1/2 IN. PULLEY to the
fiat on the FRONT LEG WELDM’ENT using two (2) 3/8 x 2 iN. BOLTS, two (2) 3/8 IN. WASHEt~, two {2) 2-3/8
CABLE RETAINING CLIPS, and taro (2) 3/8 IN. LOCK NUTS.
To assemble the LEG PRESS CABLE, follow lhe cable muting diagram and use the following steps:
Adjust the LEG PRESS so the seat is in its tightest pre-stretch position.
SECURELY attach the loop end of the LEG PRESS CABLE to the FROIqr LEG WELDMENT using one (I)
QUICK DISCONNECT LINg<.
~un the cable through the hole in the D-RING as showa in (’DETAIL A) and attach one {’I) KEYHOLE CLEVIS
to the end of the LEG PRESS CABLE.
12F21/95
NOTE:
IF THE CABLE APPEARS TO BE TOO SHORT, MAKE SURE LEG PRESS IS ADJ’USTED SO THE SEAT AND
FOOT PLATES ARE IN THEIR CLOSEST POSITION. THE D-RING CABLE ON THE 425 MAY ALSO NEED
TO BE ADJUSTED.
--
NOTE:
14.
15.
16.
17.
IF THE 445101, 425 2ND STACK OPTION IS E~STALLED, AND THE REAR SttROUD ItAS AN OVAL SLOT,
THE LEG PRESS CABLE WILL l~3rE TO BE LOOPED TI:IROUGH THE SLOT PRIOR TO FINISHING STEP
!3.
Attach one (I) SHOCK CORD to the KEYHOLE CLEVIS on the end of the LEG PRESS CABLE, and r~ute the SHOCK
CQRD up and around the second 2 IN. FULLEY above the D=RING and down to the BASK
Attach one (I) SWIVEL to the end of t~c SHOCK CORD. Slip the end of the swivel over the 31t~ X 4-I12 IN THREADED
SHAFT, and SECURE. in place ~-ith one (I) 3/8 IN. LOCK NUT.
SECURELY attach the REAR SHROUD using four (4) 3/~ X 1 IN. BOLTS and four (4) 3/8 IN. WASHERS.
The 832 LEG PRESS OPTION is equipped with a SPRING PIN ADJUSTMENT to accommodate different sized 1~ers
and to allow crecy" entry and exit from the machine. To use, you must slightly push agaimt the foot plates t,:) take tension off
the pin. ¯