Page 1
Operating and installation instructions
Large-capacity BioFresh refrigerator
081110
7084228 - 00
B 2756 ... 6
Page 2
Appliance at a glance
Contents
1 Appliance at a glance............................................ 2
1.1 Description of appliance and equipment.................. 2
1.2 Range of appliance use............................................ 2
1.3 Conformity................................................................ 3
1.4 External dimensions of the appliance....................... 3
1.5 Saving energy.......................................................... 3
1.6 Insulation plate......................................................... 3
1.7 HomeDialog............................................................. 3
2 General safety information................................... 3
3 Controls and displays........................................... 4
3.1 Operating and control elements............................... 4
3.2 Temperature display................................................. 4
4 Putting into operation............................................ 4
4.1 Transporting the appliance....................................... 4
4.2 Installing the appliance............................................. 4
4.3 Changing over the door hinges................................ 5
4.4 Insertion into a row of kitchen units........................... 6
4.5 Disposing of packaging............................................ 6
4.6 Connecting the appliance......................................... 6
4.7 Switching on the appliance....................................... 6
5 Control.................................................................... 7
5.1 Brightness of the temperature display...................... 7
5.2 Child proofing........................................................... 7
5.3 Door alarm................................................................ 7
5.4 Storing food.............................................................. 7
5.5 Storage times........................................................... 7
5.6 Setting the temperature............................................ 8
5.7 Adjusting the humidity.............................................. 8
5.8 Drawers.................................................................... 8
6 Maintenance........................................................... 8
6.1 Cleaning the appliance............................................. 8
6.2 Customer service..................................................... 9
7 Malfunction............................................................. 9
8 Decommissioning.................................................. 10
8.1 Switching off the appliance....................................... 10
8.2 Taking the appliance out of service.......................... 10
9 Disposing of the appliance................................... 10
The manufacturer works constantly on the further development
of all the types and models. Therefore please understand that
we have to reserve the right to make design, equipment and
technical modifications.
To get to know all the benefits of your new appliance, please
read the information contained in these instructions carefully.
The instructions apply to several models. Differences may
occur. Text relating only to specific appliances is marked with
an asterisk (*).
Instructions for action are marked with a , the results of
action are marked with a
.
1 Appliance at a glance
Fig. 1
(1) Transport grips at back (4) Type plate
(2) Operating and control
elements
(3) Drawer for herbs and
berries
(5) Drawers
(6) Adjustable feet
1.2 Range of appliance use
The appliance is suitable solely for cooling food in a domestic
environment or similar. This includes use in, for example
in staff kitchenettes, bed and breakfast establishments,
-
by guests in country homes, hotels, motels and other forms
-
of accommodation,
in catering and similar services in the wholesale trade
-
Use the appliance solely as is customary within a domestic
environment. All other types of use are inadmissible. The appliance is not suitable for storing and cooling medicines, blood
plasma, laboratory preparations or similar substances and
products covered by the 2007/47/EC Medical Devices Directive. Misuse of the appliance can result in the stored products
suffering harm or perishing. Furthermore, the appliance is not
suitable for operation in potentially explosive atmospheres.
The appliance is set to operate within specific ambient temperature limits according to its climate rating. The correct climate
rating for your appliance is indicated on the type plate.
Note
Compliance with the ambient temperatures indicated is
u
required, otherwise the cooling performance is reduced.
1.1 Description of appliance and equipment
Note
Shelves, drawers and baskets are arranged for optimum
u
energy efficiency on delivery.
2
Climate
rating
SN 10 °C to 32 °C
N 16 °C to 32 °C
ST 16 °C to 38 °C
T 16 °C to 43 °C
for ambient temperatures of
Page 3
General safety information
1.3 Conformity
The refrigerant circuit has been tested for leaks. The appliance
complies with current safety regulations and EC directives
2006/95/EC and 2004/108/EC.
1.4 External dimensions of the appliance
Fig. 2
1.5 Saving energy
Always ensure good ventilation. Do not cover ventilation
-
openings or grille.
Always keep fan louvres clear.
-
Do not place appliance in areas of direct sunlight or next to a
-
stove, heater or similar object.
The energy consumption depends on the installation condi-
-
tions, e.g. the ambient temperature (see 1.2) .
Keep the time the appliance is open to a minimum.
-
The lower the temperature setting, the higher the power
-
consumption.
Store food logically. (see Appliance at a glance).
-
First cool warm food to room temperature before storing it .
-
Accumulated dust increases the energy
consumption:
Once a year, dust the refrigerating unit
-
together with the metal grille of the heat
exchanger at the back of the appliance.
1.6 Insulation plate
The insulation plate for part-load operation is available as an
accessory from specialist dealers.
If you do not store much food in the appliance, you can reduce the power consumption by as much as 50 % by using the insulation plate. Up to 5 drawers can be deenergised, depending on model. At least 3
drawers are necessary for cooling. More
information accompanies the insulation
plate.
1.7 HomeDialog
Depending on model and options, the HomeDialog system can be used to network a number
of Liebherr appliances (situated, for example, in
the basement) with a main appliance (sited, for
example, in the kitchen) and control them via the
latter. You will find more information on the
benefits, requirements and principle of operation
on the internet at www. liebherr.com.
2 General safety information
Danger for the user:
This appliance is not designed for persons (including chil-
-
dren) with physical, sensory or mental impairment or
persons not having sufficient experience and knowledge,
unless they are instructed in the use of the appliance and
are initially supervised by a person responsible for their
safety. Keep children under supervision to ensure they do
not play with the appliance.
In case of a fault, pull out the mains plug (not by pulling the
-
connecting cable) or switch off the fuse.
Have any repairs to or intervention in the appliance, and any
-
change of the mains power cable, carried out by the
customer service only or by other specialised personnel
trained for the purpose.
When disconnecting the appliance from the supply, always
-
take hold of the plug. Do not pull the cable.
Install and connect the appliance only as instructed.
-
Please keep these instructions in a safe place and pass
-
them on to any subsequent owners.
Special-purpose lamps (incandescent lamps, LEDs, fluores-
-
cent tubes) in the appliance serve to illuminate the appliance
interior and are not suited for room illumination.
Fire hazard:
The refrigerant R 600a is environmentally friendly but flam-
-
mable. Escaping refrigerant may ignite.
Do not damage the refrigerant circuit pipes.
•
Do not allow naked flames or ignition sources to enter the
•
appliance.
Do not use any electrical appliances in the interior (e.g.
•
steam cleaners, heaters, ice cream maker etc.).
If refrigerant escapes: eliminate naked flames or sources
•
of ignition from the vicinity. Pull out the power plug. Ventilate the area well. Notify customer service.
Do not store explosives or sprays using combustible propel-
-
lants such as butane, propane, pentane, etc. in the appliance. Respective spray cans can be identified by reference
to the contents printed on the can or by a flame symbol.
Gases possibly escaping may ignite due to electrical
components.
Do not place any burning candles, lamps or other items with
-
naked flames on or in the appliance.
Only store high-percentage alcohol in tightly sealed, upright
-
containers. Alcohol possibly escaping may ignite due to
electrical components.
Danger of tipping and falling:
Do not misuse the plinth, drawers, doors etc. as a step or for
-
support. This applies particularly to children.
Danger of food poisoning:
Do not consume food which has been stored too long.
-
Danger of frostbite, numbness and pain:
Avoid lasting skin contact with cold surfaces or refrigerated/
-
frozen food or take protective steps, e.g. wear gloves. Do
not consume ice cream, water ice or ice cubes immediately
and do not consume them too cold.
3
Page 4
Controls and displays
Please observe the specific information in the other
sections:
DANGER identifies a situation involving direct
danger which, if not obviated, may
result in death or severe bodily
injury.
WARNING identifies a dangerous situation
which, if not obviated, may result in
death or severe bodily injury.
CAUTION identifies a dangerous situation
which, if not obviated, may result in
minor or medium bodily injury.
NOTICE identifies a dangerous situation
which, if not obviated, may result in
damage to property.
Note identifies useful information and tips.
3 Controls and displays
3.1 Operating and control elements
4.2 Installing the appliance
In the event that the appliance is damaged, contact the supplier
immediately before connecting to the mains.
The floor at the site must be flat and level.
Do not install the appliance in a location where it is exposed to
direct radiation of the sun, next to a cooker, heater and similar.
Always install the appliance with the back directly against the
wall.
Do not install the appliance without assistance.
Standard EN 378 specifies that the room in which you install
your appliance must have a volume of 1 m2 per 8 g of R 600a
refrigerant used in the appliance. If the room in which the appliance is installed is too small, a flammable gas-air mixture may
form in the event of a leakage in the refrigeration circuit. The
quantity of refrigerant used in your appliance is indicated on the
type plate on the inside of the appliance.
The appliance may be moved only when it is empty.
Fire hazard due to dampness!
If live parts or the mains lead become damp this may cause
short circuits.
u
WARNING
The appliance is designed for use in enclosed areas. Do not
operate the appliance outdoors or in areas where it is
exposed to splash water or damp conditions.
Fig. 3
(1) Up setting button (7) On/Off button
(2) Down setting button (8) Dry/Hydro button
(3) Menu symbol (9) Alarm button
(4) Alarm symbol (10) Power failure symbol
(5) Dry/Hydro symbol (11) Child lock symbol
(6) Temperature display (12) HomeDialog symbol
3.2 Temperature display
The following are displayed in normal operation:
the average BioFresh temperature
-
The temperature display flashes:
the temperature setting is being changed
-
The following displays indicate malfunction. Possible causes
and corrective action (see Malfunction).
F0 to F9
-
4 Putting into operation
4.1 Transporting the appliance
Fire hazard due to refrigerant!
The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite.
u
Fire hazard and danger of damage!
u
Blocked ventilation openings pose a risk of fire and damage!
u
u
u
u
u
NOTICE
Risk of damage due to condensate!
u
WARNING
Do not damage the piping of the refrigeration circuit.
WARNING
Do not place appliances emitting heat e.g. microwaves,
toasters etc. on the appliance!
WARNING
Always keep the ventilation openings clear. Always ensure
that the appliance is properly ventilated!
Detach the connecting cable from the rear of the appliance,
removing the cable holder at the same time because otherwise there will be vibratory noise!
Remove the protective film from the decorative trims.
Remove all transit supports.
Dispose of packaging material (see 4.5) .
Do not install the appliance directly alongside a further
refrigerator/freezer.
CAUTION
Risk of injury and danger of damage as a result of incorrect
transport!
Transport the appliance in a packed condition.
u
Transport the appliance upright.
u
Do not transport the appliance without assistance.
u
4
Page 5
Align the appliance so that it
u
stands firmly and on a level by
applying the accompanying
spanner to the adjustableheight feet (A) and using a
spirit level.
Then support the door: Extend
u
the adjustable foot at the turn
hinge (B) until it rests on the
floor and then make a further
90° turn.
Note
Clean the appliance (see 6.1) .
u
Putting into operation
If the appliance is installed in a very damp environment,
condensate may form on the outside of the appliance.
Always see to good ventilation at the installation site.
u
4.3 Changing over the door hinges
You can change over the door hinges if necessary.
Ensure that the following tools are to hand:
Torx 25
q
Torx 15
q
Screwdriver
q
Accompanying open-end spanner
q
Second person for fitting work, if needed
q
Fig. 4
Draw safety lock
u
Remove the cover
u
If necessary, tip the appliance back a little with the assis-
u
tance of a second person for removal of the bearing pin.
Pull out the bearing pin
u
In so doing, pay attention to the hinge bush
CAUTION
Risk of injury if the door tips!
Take good hold of the door.
u
Set down the door carefully.
u
Fig. 4 (1)
Fig. 4 (13)
Fig. 4 (2)
forwards for removal.
.*
downwards and forwards.
Fig. 4 (3)
.
Disengage the top cover
u
forward direction using a screwdriver and remove them
downwards at an angle.
Unscrew the bearing pin
u
opposite side tightly (4 Nm). To do this, use the Allen
screw on the spanner wrench provided.
To re-fit the cover
u
is located: insert it at the back and engage it at the front.
To re-fit the cover
u
the back and engage it at the front.
Fig. 5 (7)
Fig. 5 (7)
Fig. 5 (8)
and cover
Fig. 5 (9)
to the side where the bearing pin
at the opposite side: insert it at
and screw it into the
Fig. 5 (8)
Fig. 6
Lift the stopper
u
transfer it.
Detach door handle, stoppers
u
plates
Fig. 6 (11)
When fitting the pressure plates, pay attention that they
u
engage properly.
Attach the door to the bearing pin
u
door.
Slightly tip the appliance
u
backwards again and reinsert the bearing pin
Fig. 4 (2)
hinge bush
notch on the bearing pin
must face forward.
Place the cover
u
on the opposite side.*
Fig. 6 (12)
out of the door bearing bush and
Fig. 6 (10)
and transfer to the opposite side.
together with the
Fig. 4 (3)
. The
Fig. 4 (13)
Fig. 5 (9)
and pressure
and close the
Fig. 5
in a
Fig. 7
Open the door, tip it at the bottom for removal and detach it.
u
Unscrew the turn hinge
u
Unscrew the bearing part
u
site hole in the turn hinge and screw it down again.
Carefully lift out the plugs
u
opposite side.
Unscrew the screw
u
side.
Screw the bearing bracket
u
tightly (4 Nm) or retighten with the aid of a cordless screwdriver if necessary.
Fig. 4 (4)
Fig. 4 (5)
Fig. 4 (6)
Fig. 4 (20)
Fig. 4 (4)
.
, transfer it to the oppo-
and insert them into the
and insert it into the opposite
onto the new hinge side
5
Page 6
Putting into operation
Risk of injury if the door tips!
u
u
u
u
Risk of injury due to the door dropping out!
If the bearing parts are not screwed into place firmly enough,
the door may drop out. This may lead to severe injuries. What
is more, the door may not close and therefore the appliance
may fail to cool properly.
u
u
CAUTION
The safety lock
side so that the bearing pin and therefore the door are
secured.
Snap the safety lock
If necessary, align the door to the appliance housing by way
of the two oblong holes in the turn hinge
unscrew the middle screw.
WARNING
Screw on the bearing brackets/bearing pins tightly (4 Nm).
Check all of the screws and retighten if necessary.
(1)
has to engage with the turn hinge at the
(1)
onto the turn hinge again.
Fig. 4 (4)
. To do so,
The appliance can be inserted into a row of kitchen units. To
match the appliance
a suitable stack cabinet
ance.
When inserting the appliance into a row of kitchen units (max.
depth 580 mm), the appliance can be installed directly next to
the kitchen unit
to the front of the kitchen unit by 34 mm at the side and by
50 mm in the middle of the appliance. It can be opened and
closed perfectly as a result.
Important for the ventilation:
At the back of the stack cabinet there has to be a ventilation
-
duct of at least 50 mm depth throughout the width of the
stack cabinet.
The ventilation space under the ceiling has to be at least
-
300 cm2.
The larger the ventilation space, the more energy-saving the
-
appliance is in operation.
If the appliance is installed with the hinges next to a wall
Fig. 8 (4)
least 40 mm. This corresponds to the projection of the handle
when the door is open.
, the distance between appliance and wall has to be at
Fig. 8 (2)
Fig. 8 (3)
to the height of the row of units,
Fig. 8 (1)
. The appliance door projects relative
can be fitted above the appli-
4.5 Disposing of packaging
Danger of suffocation due to packing material and plastic film!
u
WARNING
Do not allow children to play with packing material.
4.4 Insertion into a row of kitchen units
Fig. 8
(1) Stack cabinet (3) Kitchen cabinet
(2) Appliance (4) Wall
The packaging is made of recyclable materials:
corrugated board/cardboard
-
expanded polystyrene parts
-
polythene bags and sheets
-
polypropylene straps
-
nailed wooden frame with polyethylene panel*
-
Take the packaging material to an official collecting point.
u
4.6 Connecting the appliance
NOTICE
Risk of damage to the electronic control system!
Do not use stand-alone inverters (conversion of d.c. to a.c./
u
three-phase) or energy saving plugs.
Fire and overheating hazard!
u
The type of current (alternating current) and voltage at the
installation site have to conform with the data on the type plate
(see Appliance at a glance).
Connect the appliance only with a properly installed
socket outlet with earthing contact. The socket outlet
must be fused with 10 A or higher.
It must be easily accessible so that the appliance can
be quickly disconnected from the supply in an emergency.
u
u
WARNING
Do not use extension cables or multiple socket outlets.
Check the electrical connection.
Plug in the power plug.
4.7 Switching on the appliance
Press On/Off button
u
The temperature display indicates the current temperature.
w
The interior light is on when the door is open.
w
Fig. 3 (7)
.
6
Page 7
Control
5 Control
5.1 Brightness of the temperature display
You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Adjusting the brightness
The brightness is adjustable between h0 (no illumination) and
h5 (maximum luminosity).
To activate the setting mode: Press the Dry/Hydro button
u
Fig. 3 (8)
The display indicates c.
w
The menu symbol
w
Using the Up setting button
u
button,
To confirm: Briefly press the Dry/Hydro button
u
To make the display brighter: Press Up button
u
Fig. 3 (1)
To make the display darker: Press Down button
u
Fig. 3 (2)
To confirm: Press theDry/Hydro button
u
The brightness is adjusted to the new value.
w
To deactivate the setting mode: Press the On/Off button
u
Fig. 3 (7)
-or-
Wait for 5 minutes.
u
The temperature is indicated again in the temperature
w
display.
5.2 Child proofing
The child-proofing function enables you to make sure that the
appliance is not inadvertently switched off by playing children.
5.2.1 Setting the child lock
To activate the setting mode: Press the Dry/Hydro button
u
Fig. 3 (8)
The display indicates c.
w
The menu symbol
w
Using the Up setting button
u
button,
Briefly press the Dry/Hydro button
u
When c1 is indicated in the display:
Briefly press the Dry/Hydro button
u
activate the child lock.
The child lock symbol
w
display.
When c0 is indicated in the display:
Briefly press the Dry/Hydro button
u
the child lock.
The child lock symbol
w
display.
To deactivate the setting mode: Press the On/Off button
u
Fig. 3 (7)
-or-
Wait for 5 minutes.
u
The temperature is indicated again in the temperature
w
display.
5.3 Door alarm
If the door is open longer then 60 s, the audible alarm sounds.
The audible alarm is automatically silenced when the door is
closed.
for about 5 seconds.
Fig. 3 (3)
Fig. 3 (2)
select h.
.
.
.
for about 5 seconds.
Fig. 3 (3)
Fig. 3 (2)
select c.
Fig. 3 (11)
Fig. 3 (11)
.
shines.
Fig. 3 (1)
or Down setting
Fig. 3 (8)
Fig. 3 (8)
shines.
Fig. 3 (1)
and Down setting
Fig. 3 (8)
to confirm.
Fig. 3 (8)
shines. c flashes in the
Fig. 3 (8)
goes out. c flashes in the
.
.
to
to deactivate
5.3.1 Muting the door alarm
The audible alarm can be muted when the door is open. The
sound switch-off function is active as long as the door is left
open.
Press alarm button
u
The door alarm is silenced.
w
Fig. 3 (9)
.
5.4 Storing food
Note
Vegetables sensitive to cold, such as cucumbers, auber-
u
gines, semi-ripe tomatoes, zucchinis and all tropical fruits
sensitive to cold, do not belong in the BioFresh compartment.
To prevent food spoilage due to transfer of germs: Store
u
unwrapped animal and vegetable products separate from
one another in the drawers. This also applies to different
sorts of meat.
If food has to be stored together due to lack of space:
wrap the food.
u
The maximum load for the top drawer is 15 kg and for the
u
other drawers 25 kg each.
The shelves can each be loaded with 35 kg.
u
5.5 Storage times
Standard values for storage time at low humidity
Butter up to 90 days
Hard cheese up to 110 days
Milk up to 12 days
Sausage, cold meat up to 9 days
Poultry up to 6 days
Pork up to 7 days
Beef up to 7 days
Game up to 7 days
Note
Please note that protein-rich food deteriorates faster, i.e.
u
shellfish and crustaceans deteriorate faster than fish, fish
faster than meat.
Standard values for storage time at high humidity
Vegetables, salad
Artichokes up to 14 days
Celery up to 28 days
Cauliflower up to 21 days
Broccoli up to 13 days
Chicory up to 27 days
Lamb's lettuce up to 19 days
Peas up to 14 days
Kale up to 14 days
Carrots up to 80 days
Garlic up to 160 days
Kohlrabi up to 55 days
Lettuce up to 13 days
Herbs up to 13 days
7
Page 8
Maintenance
Standard values for storage time at high humidity
Leek up to 29 days
Mushrooms up to 7 days
Radishes up to 10 days
Brussels sprouts up to 20 days
Asparagus up to 18 days
Spinach up to 13 days
Savoy cabbage up to 20 days
Fruit
Apricots up to 13 days
Apples up to 80 days
Pears up to 55 days
Blackberries up to 3 days
Dates up to 180 days
Strawberries up to 7 days
Figs up to 7 days
Blueberries up to 9 days
Raspberries up to 3 days
Currants up to 7 days
Sweet cherries up to 14 days
Kiwis up to 80 days
Peaches up to 13 days
Plums up to 20 days
Cranberries up to 60 days
Rhubarb up to 13 days
Gooseberries up to 13 days
Grapes up to 29 days
5.6 Setting the temperature
The temperature is automatically regulated to just above 0 °C.
You can adjust the temperature slightly colder or warmer. The
temperature can be adjusted from b1 (coldest temperature) to
b9 (warmest temperature). The presetting is b5. With the b1 to
b4 values, the temperature can drop below 0 ° C and therefore
food can freeze slightly as a result.
To set a higher temperature: Press Up button
u
To set a lower temperature: Press Down button
u
When the button is pressed the first time, the previous value
w
is indicated in the temperature display.
To change the temperature in steps: Briefly press the
u
button.
-or-
To change the temperature continuously: Hold down the
u
button.
During the adjustment, b1 to b9 are displayed.
w
The actual temperature is displayed about 5 seconds after
w
the last press of a button. The temperature slowly adjusts to
the new value.
Fig. 3 (1)
Fig. 3 (2)
.
.
5.7 Adjusting the humidity
The humidity in the appliance can be adjusted depending on
what type of food is placed inside.
The dry setting produces a dry atmosphere suitable for storing
dry or wrapped food (dairy products, meat, fish, sausages).
The appliance has the lowest energy consumption in this operating mode.
The hydro setting produces a humid atmosphere suitable for
storing unwrapped salad, vegetables and fruit with high
intrinsic moisture. When the drawers are well filled, a dewy
atmosphere with a humidity of up to 90% max. is established.
The humidity in the compartment depends on the moisture
content of the food stored and on the opening frequency. dry is
preset.
To set hydro: Press the
u
Dry/Hydro button
Fig. 9 (8)
The Dry/Hydro symbol
w
Fig. 9 (5)
To set dry: Press the Dry/
u
Hydro button
The Dry/Hydro symbol
w
Fig. 9 (5)
.
shines.
Fig. 9 (8)
goes out.
.
Fig. 9
5.8 Drawers
To store the food straight on the shelves: Pull the drawer
u
forwards and lift it out.
6 Maintenance
6.1 Cleaning the appliance
Before cleaning:
CAUTION
Risk of injury and damage as a result of hot steam!
Hot steam may damage the surfaces and cause burns.
Do not use any steam cleaners!
u
NOTICE
Incorrect cleaning damages the appliance!
Do not use cleaning agents in concentrated form.
u
Do not use any scouring or abrasive sponges or steel wool.
u
Do not use any cleaning agents containing sand, chloride,
u
chemicals or acid.
Do not use chemical solvents.
u
Do not damage or remove the type plate on the inside of the
u
appliance. It is important for the customer service.
Do not pull off, bend or damage cables or other compo-
u
nents.
Do not allow any cleaning water to enter the drain channel,
u
ventilation grille or electrical parts.
Empty the appliance.
u
- Use soft cleaning cloths and a multi-purpose
cleaning agent with neutral pH value.
- Only use food compatible cleaning and care
agents on the inside of the appliance.
Regularly clean ventilation grilles.
u
Dust deposits increase energy consumption.
w
Outside surfaces and interior:
Clean the plastic surfaces, outside and inside, by hand
u
using lukewarm water and a little washing-up liquid.
8
Page 9
Malfunction
Items of equipment:
Clean items of equipment by hand with lukewarm water and
u
a little washing-up liquid.
After cleaning:
Wipe dry the appliance and items of equipment.
u
Connect the appliance and switch it on again.
u
When the temperature is sufficiently cold:
Put the food back inside.
u
6.2 Customer service
First check whether you can correct the fault yourself by reference to the list (see Malfunction). If this is not the case, please
contact the customer service whose address is given in the
enclosed customer service list.
Risk of injury if repair work is not carried out professionally!
u
u
WARNING
Have any repairs and action - not expressly specified - on
the appliance and mains cable carried out by service
personnel only. (see Maintenance)
Read the appliance
designation
Fig. 10 (1)
No.
Fig. 10 (2)
serial No.
off the type plate
located inside the
appliance on the lefthand side.
, service
and
Fig. 10 (3)
Fig. 10
Notify the customer service, specifying the fault, appliance
u
designation
Fig. 10 (3)
This will help us to provide you with a faster and more accu-
w
rate service.
Keep the appliance closed until the customer service
u
arrives.
The food will stay cool longer.
w
Pull out the mains plug (not by pulling the connecting cable)
u
or switch off the fuse.
Fig. 10 (1)
.
, service No.
Fig. 10 (2)
and serial No.
7 Malfunction
Your appliance is designed and manufactured for a long life
span and reliable operation. If a malfunction nonetheless
occurs during operation, check whether it is due to a handling
error. In this case you will have to be charged for the costs
incurred, even during the warranty period. You may be able to
rectify the following faults yourself:
Appliance does not work.
The appliance is not switched on.
→
Switch on the appliance.
u
The power plug is not properly inserted in the wall socket.
→
Check power plug.
u
The fuse of the wall socket is not in order.
→
Check fuse.
u
The compressor runs for a long time.
The compressor switches to a low speed when little cold is
→
needed. Although the running time is increased as a result,
energy is saved.
This is normal in energy-saving models.
u
Excessive noise.
Speed-controlled* compressors may produce varying
→
running noise due to different speed steps.
The sound is normal.
u
A bubbling and gurgling noise.
This noise comes from the refrigerant flowing in the refriger-
→
ation circuit.
The sound is normal.
u
A quiet clicking noise.
The noise is produced whenever the refrigeration unit
→
(motor) automatically switches on or off.
The sound is normal.
u
A hum. It is briefly a little louder when the refrigeration
unit (the motor) switches on.
The refrigeration increases automatically when fresh food
→
has just been placed in the appliance or the door has been
left open for a while.
The sound is normal.
u
The ambient temperature is too high.
→
Solution: (see 1.2)
u
A low hum.
The sound is produced by air flow noise of the fan.
→
The sound is normal.
u
The fan runs for a long time
With the "hydro" setting, the fan has to run longer for func-
→
tional reasons.
This is normal.
u
Vibratory noise.
The appliance is not standing firmly on the floor. As a result,
→
adjoining units or objects are set into vibration by the
running refrigeration unit.
Move the appliance away a little and align it using the
u
adjustable feet.
The temperature display indicates: F0 to F9
There is a fault.
→
Contact the customer service. (see Maintenance).
u
DEMO shines in the temperature display.
The demo mode is activated.
→
Contact the customer service. (see Maintenance).
u
The temperature is not cold enough.
The door of the appliance is not properly closed.
→
Close the door of the appliance.
u
Insufficient ventilation.
→
Clear ventilation grilles.
u
The ambient temperature is too high.
→
Solution: (see 1.2) .
u
The appliance was opened too frequently or for too long.
→
Wait until the appliance reaches the required temperature
u
itself. If not, contact the customer service. (see Maintenance).
The temperature is incorrectly set.
→
Set to a colder temperature and check after 24 h.
u
The appliance is too close to a heat source.
→
Solution: (see Putting into operation).
u
The interior light is not on.
The appliance is not switched on.
→
Switch on the appliance.
u
The door was open longer than 15 min.
→
The interior light automatically switches off if the door has
u
been open for about 15 min.
The LED lighting is defective or the cover is damaged:
→
9
Page 10
Decommissioning
Risk of injury due to electric shock!
Live parts are located under the cover.
u
Danger of injury due to laser radiation, class 1M.
u
WARNING
Have the LED interior light changed or repaired only by the
customer service or by specialized personnel trained for the
purpose.
WARNING
Do not look inside when the cover is open.
8 Decommissioning
8.1 Switching off the appliance
Press On/Off button
u
The temperature display is dark.
w
8.2 Taking the appliance out of service
Empty the appliance.
u
Pull out the power plug.
u
Clean the appliance (see 6.1) .
u
Fig. 3 (7)
for about 2 seconds.
Leave the door open to prevent odour.
u
9 Disposing of the appliance
The appliance contains some reusable materials
and should be disposed of properly - not simply
with unsorted household refuse. Appliances which
are no longer needed must be disposed of in a
professional and appropriate way, in accordance
with the current local regulations and laws.
When disposing of the appliance, ensure that the refrigeration
circuit is not damaged to prevent uncontrolled escape of the
refrigerant it contains (data on type plate) and oil.
Disable the appliance.
u
Pull out the plug.
u
Cut through the connecting cable.
u
10
Loading...