LG WD-1252RD7 Owner’s Manual

OWNER’S MANUAL

WASHING MACHINE

Please read this manual carefully before operating your washing machine and retain it for future reference.

WD-1252RD7

P/No.: MFL48165966

www.lg.com

C ontents
Contents....................................	2
Product feature.........................	3
Warnings
Important safety instructions .................	4
Save these instructions.........................	4
Specification.............................	6
Installation
Transit bolts ..........................................	7
Removing transit bolts ..........................	7
Installation place requirement ...............	8
Positioning ............................................	8
Electrical connection .............................	9
Connecting water supply hose............	10
Installation of drain hose .....................	12
Level adjustment.................................	13
In case of auto leveling foot ................	13
Care before washing
Before the first washing ......................	15
Caring before washing ........................	15
Adding detergent
Adding detergent and fabric softener..	16
How to use washer
Washing program table.......................	18
Control Panel ......................................	19
Additional program..............................	20
- Power..............................................	20
- Program ..........................................	20
- Start/Pause .....................................	21
- Door Lock .......................................	21
- Detecting.........................................	21
- Wash...............................................	21
- Child Lock .......................................	22
- Rinse...............................................	22
- Spin.................................................	23
- Water Temperature.........................	23
- Add Load ........................................	24
- Time Delay......................................	24
- Tub Clean .......................................	25
- Dry ..................................................	26
- Display ............................................	28

Thank you for buying a LG Fully

Automatic Washing Machine.

Please read your owner’s manual carefully, it provides instruction on safe installation, use and maintenance. Retain it for future reference.

Record the model and serial number of your washing machine.

Model No.

Serial No.

Date of Purchase

Maintenance
The water inlet filter.............................	29
The drain pump filter ...........................	30
Dispenser drawer................................	31
The drawer recess ..............................	31
The washing drum ..............................	31
The water circulation nozzle & steam
nozzle..................................................	32
Cleaning your washer .........................	32
Winterizing instructions .......................	32
Troubleshooting guide
Diagnosing problems ..........................	33
Error messages...................................	36
Using SMARTDIAGNOSIS™..............	37
Terms of warranty ..................	38

2

P roduct Feature

Direct Drive System

The advanced Brushless DC motor directly drives the drum without belt and pulley.

6 Motion

Washer is able to perform various drum actions or a combination of different actions depending on the wash program selected. Combined with a controlled spin speed and the ability of the drum to

rotate both left and right, the wash performance of the machine is greatly improved, giving you perfect results every time.

Water Circulation

Sprays detergent solution and water onto the load over and over. Clothes are soaked more quickly and thoroughly during wash cycle. The detergent suds can be removed more easily by the water shower during rinse cycle. The water circulation system uses both water and detergent more efficiently.

Tilted Drum and Extra Large Door Opening

Tilted drum and extra large opening make it possible to load and unload clothing more easily.

Embossing drum & waved lifter

Embossing drum enhances the washing performance and reduces clothes damage.The waved lifter spray and help clothes to enhance washing performance during the washing cycle.

Automatic Wash Load Detection

Automatically detects the load and optimizes the washing time.

Built-in Heater

Internal heater helps to maintain water temperature at its optimum level for selected cycles.

Child Lock

The Child lock prevents children from pressing any button to change the settings during operation.

3

W arnings

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE

For your safety, the information in this manual must be followed to minimize WARNING! the risk of fire or explosion, electric shock, or to prevent property damage,

personal injury, or loss of life.

IMPORTANT SAFETY INSTRUCTIONS

WARNING : To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:

•Before installation, check exterior damages. If it has, do not install.

•Do not install or store the washer where it will be exposed to the weather.

•Do not tamper with controls.

•Do not repair or replace any part of the washer or attempt any servicing unless specifically

recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.

•Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc.

•Close supervision is necessary if this appliance is used by or near children. Do not allow children to play on, with, or inside this or any other appliance.

•Keep small animals away from the appliance.

•Do not leave the washer door open.

An open door could entice children to hang on the door or crawl inside the washer.

•Never reach into washer while it is moving. Wait until the drum has completely stopped.

•The laundry process can reduce the flame retardant of fabrics.

•To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.

•Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible

or explosive substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) which may ignite or explode. Oil may remain in the tub after a whole cycle resulting in fire during drying. So, do not load oiled clothes.

•Do not slam the washer door closed or try to force the door open when locked. This could result in damage to the washer.

•When the machine runs high temperature, the front door may be very hot. Don’t touch it.

•To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning.

•When unplugging power cord, do not pull out by grasping the cord. Otherwise, the power cord may be damaged.

•Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

•Before discarding an old machine unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.

•When a product was under water, Please call service center. The risk of electric shock and fire.

Do not push down the door excessively, when washer door open. This could topple over the washer.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.

•Do not use an adapter or otherwise defeat the grounding plug.

•If you don’t have the proper outlet, consult an electrician.

WARNING : Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

4

W arnings

To minimize the risk of fire in a tumble dryer, the following should be observed:

•Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer.

Oil-affected items can ignite spontaneously, especially when exposed to heat sources Such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard.

If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent-this will reduce, but not eliminate, the hazard. Washed in hot water with extra detergent-this will reduce, but not eliminate, the hazard. The ‘cool down’ cycle of tumble dryers should be used to reduce the temperature of the items. They should not be removed from the tumble dryer or piled or stacked while hot.

•Items that have been previously cleaned in, washed in, soaked in or spotted with petrol/gasoline, dry-cleaning solvents or other flammable or explosive substances should not be placed in a tumble dryer.

Highly flammable substances commonly used in domestic environments include acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some brands), turpentine, waxes and was removers.

•Items containing foam rubber (also known as latex foam) or similarly testured rubber. like materials should not be dried in a tumble dryer on a heat setting.

Foam rubber materials can, when heated, produce fire by spontaneous combustion.

•Fabric softeners or similar products should not be used in a tumble dryer to eliminate the effects of static electricity unless this practice is specifically recommended by the manufacturer of the fabric softener or product.

•Undergarments that contain metal reinforcements should not be placed in a tumble dryer.

Damage to the tumble dryer can result if metal reinforcements come loose during drying. When available a drying rack could be used for such items.

•Plastic articles such as shower caps or babies waterproof napkin covers should not be placed in a tumble dryer.

•Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes and rubber-coated tennis shoes should not be placed in a tumble dryer.

5

S pecification

Inlet Hose

Dispenser

Drum

Door

Drain Hose

Drain Pump Filter

Drain Plug

Shipping Bolts

Power Plug

• If the supply cord is damaged, it must be replaced by the manufacturer or its authorized service technician in order to avoid a hazard.

Control Panel

Lower cover cap

Adjustable Feet

Name	: Front loading washing machine
Power supply	: 220 V~, 60 Hz
Size	: 645 mm(W) x 770 mm(D) x 940 mm(H)
Weight	: 86 kg
Wash capacity (Max. Watt)	: 13 kg (2200 W)
Dry capacity (Max. Watt)	: 7 kg (2200 W)
Spin speed	: Extra Low / Low / Medium / High / Extra High
Water consumption	: 156 l
Permissible water pressure	: 1.0 - 10.0 kgf / cm2 (100 - 1000 kPa)

The appearance and specifications may be varied without notice to improve the units quality.

Specifications subject to change by manufacturer.

Accessories

Inlet hose (1EA)

Spanner

6

I nstallation

Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.

Properly ground washer to conform with all governing codes and ordinances.

The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at all times.

Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance guarantee.

Transit bolts

The appliance is fitted with transit bolts to prevent internal damage during transport.

•Packing and all transit bolts must be removed before using the washer.

When unpacking the base, be sure to remove the additional packing support in the middle of the base packing.

Washer

Packing Support

Base Packing

Removing transit bolts

1. To prevent internal damage during transport, the special 4 bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs.

•If they are not removed, it may cause heavy vibration, noise and malfunction.

2. Unscrew the 4 bolts with the spanner supplied.

3. Take out the 4 bolts along with the rubber bungs by slightly twisting the bung. Keep the 4 bolts and the spanner for future use.

•Whenever the appliance is transported, the transit bolts must be refitted.

4. Close the holes with the caps supplied.

7

I nstallation

Installation place requirement

Drain Hose

Washer

Laundry

Tub

approx.

2cm

Level floor :

Allowable slope under entire washer is 1°

Power outlet :

Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.

Additional Clearance :

For wall, door and floor modeling is required. (10cm : rear / 2cm : right & left side)

Do not place or store laundry products on top of washer at any times.

They can damage the finish or controls.

Positioning

Install the washer on a flat hard floor.

Make sure that air circulation around the washer is not impeded by carpets,rug etc.

•Before placing the washer on tiles, apply a rubber mat under the feet.

•Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washer.

•If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.

•The washer must not be installed in rooms where the temperature can drop below 0°C.

•Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.

•With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.

•The installation instructions shall state that the openings must not be obstructed by a carpet if it has ventilation openings in the base.

8

I nstallation

Electrical connection

1. Do not use an extension cord or double adapter.

2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

3. Always unplug the machine and turn off the water supply after use.

4. Connect the machine to an earthed socket in accordance with current wiring regulations.

5. The appliance must be positioned so that the plug is easily accessible.

•Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center

•Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

•If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing machine at room temperature for a few hours before putting it into operation.

CAUTION

This appliance is not intended for use by young children or infirm persons without supervision.

Young Children should be supervised to ensure that they do not play with appliance.

CAUTION

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

If this appliance is supplied from a cord extension set or electrical portable outlet device, the cord extension set or electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

9

I nstallation

■ Connecting water supply hose

• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 ~ 10.0 kgf / cm2).

• Do not strip or crossthread when connecting inlet hose to the valve.

• If the water supply pressure is more than 1000 kPa, a decompression device should be installed.

• Periodically check the condition of the hose and replace the hose if necessary.

Step1 : Check rubber seal inlet hose

• Two rubber seals are supplied with the water inlet hoses.

They are used for preventing water leaks. Make sure the connection to taps is

sufficiently tight.

Hose

connector

Rubber seal

Step2 : Connect hose to water tap

Type-A : Connecting Screw-type hose to tap with thread

• Screw the hose connector onto water supply tap.

Type-B : Connecting Screw-type hose to tap without thread

	Upper	1. Unscrew the adapter ring plate and the 4
	connector	adapter retaining screws.
	Rubber
	packing	2. Push the adapter onto the end of the tap
		so that the rubber seal forms a watertight
		connection. Tighten the adapter ring plate
	Fixing screw	and the 4 screws.
		3. Push the water supply hose vertically
		upwards so that the rubber packing within
	Plate	the hose can adhere completely to the
	Water supply	tap and then tighten it by screwing it to
		the right.
	hose

10

I nstallation

Type-C : Connecting one touch type hose to tap without thread

		1. Unscrew the adapter ring plate and
		the 4 adapter retaining screws.
Ring plate		2. Remove the guide plate if the tap is
		too large to fit the adapter.
Guide plate
		3. Push the adapter onto the end of
		the tap so that the rubber seal forms
		a watertight connection.
		Tighten the adapter ring plate and
		the 4 screws.
		4. Pull the connector latch plate down,
		push the inlet hose onto the adapter,
		and release the connector latch plate.
		Make sure the adapter locks into place.
		After connecting inlet hose to
		water tap, turn on the water taps
		to flush out foreign substances
	Latch plate	(dirt, sand or sawdust) in the
		water lines. Let water drain into a
		bucket, and check the water
		temperature.

Step3: Connect hose to washer

• Make sure that there are no kinks in the hose and that they are not crushed.

When your washer has two valves.

• The Inlet hose which has red connector is for the hot water tap.

• If the washer has two valves, the energy is saved by using hot valve.

After completing connection, if water leaks from the hose, repeat the same steps.

Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

Use the horizontal tap

Horizontal tap

Extension tap

Square tap

11

I nstallation

This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc.

Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity.

When disposing of the appliance, cut off the mains cable, and destroy the Plug. Disable the door lock to prevent young children being trapped inside.

Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children

Installation of drain hose

			about 100 cm
			about 145 cm
	<![if ! IE]> <![endif]>100 cm	<![if ! IE]> <![endif]>cm	about 105 cm
	<![if ! IE]> <![endif]>max.	<![if ! IE]> <![endif]>min. 60

about 100 cm
about 145 cm
	<![if ! IE]> <![endif]>.max
about 105 cm	<![if ! IE]> <![endif]>cm 100
<![if ! IE]> <![endif]>60min.
<![if ! IE]> <![endif]>cm

•The drain hose should not be placed higher than 100 cm above the floor. Water in the washer does not drain or drains slowly.

•Proper securing of the drain hose will protect the floor from damage due to water leakage.

•When the drain hose is too long, do not force back into the washer. This will cause abnormal noise, malfunction, and water leakage.

•When installing the drain hose to a sink, secure it tightly with a string.

•Proper securing of the drain hose will protect the floor from damage due to water leakage should the drain hose become loose.

Laundry tub
Hose
Retainer
Tie	max. 100cm
strap	min. 60cm
max. 100cm
min. 60cm

12