LG VSR8604PG, VR8600OB, VR8602RR, VRD830MGPCM Instruction manual

FEATURES

Corner Master

By having adopted a brand new concept design that is appropriate for walls, the Robot Cleaner's cleaning performance is incredibly efficient.

Learning Mode

The Robot Cleaner is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning.

Turbo Mode

In the Turbo mode, the Robot Cleaner operates the suction motor and the brushes at a greater speed giving cleaner results.

When selected, the "Turbo" mode is automatically activated on carpets, which enables the Robot Cleaner to run more efficiently.

Drawer Mop Plate (Option)

The "Drawer mop plate" makes it much easier for users to fit and remove the mop without having to turn over the device.

My Space Mode

By commanding it to clean a particular area, the Robot Cleaner quickly cleans that desired area.

Repeat Cleaning

The Robot Cleaner will continuously clean until the battery runs out.

Zigzag

Location Search Function

If the Robot Cleaner is moved from a spot while operating, the device will automatically search for the previous location and return to the spot from where it was interrupted.

CONTENTS

BEFORE USING

2~6 Safety precautions

7 Included with product 8~9 Parts description 10~11 Button functions

12Display status information

13Before you start

14Overview

METHOD OF USE

15How to install the home station

16How to turn the Robot Cleaner power supply on & off

17How to start and stop cleaning 18~19 How to charge the battery 20~21 Cleaning modes

22~23 Auxiliary cleaning modes

24Time setting

25Scheduled cleaning

26Mop cleaning (option)

27Location search function 28~29 Smart diagnosis

HANDLING METHOD AFTER USE

30Cleaning the dust bin

31Cleaning the dust bin filter

32Cleaning the brush

33Cleaning the sensor/charging terminal

34Cleaning the side brush

35Cleaning the ultra microfiber mop (option)

ADDITIONAL INFORMATION

36~38 Troubleshooting

39 Before you call for service

REFERENCE

40Reference items

41[IEC 62929 Standard] Setting for Cleaning Performance Test

SAFETY PRECAUTIONS

The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any unexpected risk of injury or damage.

Basic safety precautions

After reading this manual, please keep it in an easily accessible location.

WARNING CAUTION

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage and/or serious bodily harm or death.

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

WARNING

1.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

2.Children should be supervised to ensure that they do not play with the appliance.

3.If the supply cord is damaged, it must be replaced by LG Electronics Service Agent in order to avoid a hazard

4.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance must not be made by children without supervision.

LG VSR8604PG, VR8600OB, VR8602RR, VRD830MGPCM Instruction manual

WARNING

For your safety, do not remove the battery from the Robot Cleaner. If you need to replace the battery of the Robot Cleaner, take it to the nearest authorized LG Electronics service center or dealer for assistance.

Failure to follow this warning can cause fire or product failure.

Make sure the power cord of the home station is not crushed under a heavy object or damaged by contact with sharp objects.

Failure to follow this warning can cause electric shock, fire or product failure. If the power cord is broken, do not plug it in. Take the product to an LG Electronics Authorised service repairer.

Do not place the home station and the Robot Cleaner near a heating device.

Doing so can cause product deformation, fire, or product failure.

Do not force the power plug to bend. Do not use the power

plug when it has been damaged or loosened.

Doing so can cause fire or product failure.

Do not touch the power plug with wet hands.

Doing so can cause electric shock.

SAFETY PRECAUTIONS

Never use the Robot Cleaner with a battery and/or home station from any other product than the Robot Cleaner.

Doing so can cause fire or product failure.

Do not use the Robot Cleaner when candles or fragile objects are placed on the floor.

Doing so can cause fire or product failure.

Always use a dedicated power outlet with a 10 amp rating.

If multiple appliances are connected to an outlet simultaneously, they can generate enough heat to cause a fire.

When pulling out the home station power plug, always pull it out by grabbing the plug, not the cord. When pulling out the power plug, do not to touch the prongs with your fingers.

Doing so can cause an electric shock.

Do not allow children or pets to play with or rest upon the Robot Cleaner at any time. Do not use the Robot Cleaner while an object is hanging from it.

Doing so can cause injury or product damage.

SAFETY PRECAUTIONS

WARNING

	Do not spray or use
	inflammable materials,
<![if ! IE]> <![endif]>Gasoline	surfactants, or drinking water
<![if ! IE]> <![endif]>Gasoline	in the vicinity of the Robot
	Cleaner.

Doing so can cause fire or product failure.

*Inflammable materials: gasoline, thinner, etc.

*Surfactant: detergent, articles for bath, etc.

Do not insert any part of the body, such as a hand or foot, below the brush or wheels of the Robot Cleaner while in use.

Doing so can cause injury or product damage.

Do not operate the Robot Cleaner on narrow and high furniture such as a wardrobe, refrigerator, desk, table, etc.

Doing so can cause injury, product failure or damage which is not covered by the warranty.

Do not activate the device on a floor that has more than a 10 degree incline.

The device may not work properly.

Turn the power supply off immediately if any abnormal sound, odor, or smoke is generated from the Robot Cleaner by removing it from the home station and turning off the main switch on the rear side of the unit.

Failure to do so can cause fire or product failure.

Do not operate the Robot Cleaner in a room where a child is sleeping.

Doing so can cause injury or product damage.

Do not leave Children or pets near the Robot Cleaner unsupervised.

Doing so can cause injury or product damage.

This product is intended for indoor domestic home use and should not be used in mobile applications. it should not be used in commercial applications such as workshops or garages or around indoor swimming pools, etc.

CAUTION

Frequently empty the dust bin and maintain its cleanliness.

The dust collected in the dust bin can trigger allergies and may contain harmful insects. it should be cleaned after each use.

Use the Robot Cleaner indoors only.

Using it outdoors can cause product failure and irreparable damage to the unit.

Close the cover of the dust bin on the main unit before starting cleaning.

If the cover is not closed, it can cause injury or product damage.

DO NOT use the Robot Cleaner around a banister, staircase or any other dangerous place.

Doing so could cause injury or damage to the unit.

In rare cases, the Robot Cleaner’s brush can damage carpet. If this happens, immediately stop the cleaning operation.

When a carpet has long tassels, the tassels can be damaged.

Do not let the main unit and charging terminal of the home station come into contact with metallic objects.

Doing so can cause product failure.

Do not put water, detergent, etc. into or onto the Robot Cleaner.

Doing so can cause product failure. Do not put any water or detergent on the Robot Cleaner. If liquids get inside of the Robot Cleaner, turn off the power supply and contact an LG Electronics sales agent or customer care center.

SAFETY PRECAUTIONS

Do not drop the Robot Cleaner or subject it to strong impacts.

Doing so can cause injury or product failure not covered by the warranty.

Do not expose the Robot Cleaner to cold temperatures (less than -5 C) for a long period of time.

Doing so can cause product failure.

Remove any cables or string from the floor before starting.

Cable or string can get tangled in the wheels of Robot Cleaner and cause product failure or the cord of an appliance can be disconnected.

Make sure the Robot Cleaner is not put on a table or desk, with the power ON.

It may result in an injury or damage to the product.

Do not allow the Robot Cleaner to sweep up liquids, blades, thumb tacks, sharp objects or ashes, hot or cold. etc.

These items can cause product failure or damage.

Do not put sharp objects into the opening of the Robot Cleaner’s ultrasonic sensors.

Doing so can cause product failure.

Do not use the Robot Cleaner when the dust bin is completely full.

Doing so can cause product failure.

SAFETY PRECAUTIONS

CAUTION

	If the floor is wet or has wet	When the robot cleaner is
	spots, wipe them up before	operating, it may hit the chair
	using the Robot Cleaner. Do	leg, desk leg, table leg or other
	not use the Robot Cleaner on a	narrow pieces of furniture.
	wet surface.	For quicker and better cleaning,
		For quicker and better cleaning,
	Doing so can cause product	place the dining chairs on top
	failure.	of the dining table.
	When attaching the mop,	NOTE: Very low thresholds will
	ensure that it is fitted correctly	allow the Robot cleaner to go
	so that it does not block the	over them and perhaps into an
	lower camera sensor.	undesirable location. Make sure
	Blocking the bottom camera	that all the doors of the rooms
	Blocking the bottom camera	that are not to be cleaned are
	sensor may not allow the	that are not to be cleaned are
	sensor may not allow the	closed.
	product to work correctly.	closed.
	product to work correctly.
	To save energy when the
	Roboking is not in use for
	longer periods, turn off the
	power switch, and turn on the
	power switch again just prior to
	using the Robot cleaner again.

Tip Check the following items before use:

•Empty the dust bin after each operation or prior to it filling up.

•Remove any cables or long strings from the floor.

•Remove any moisture from the floor before cleaning.

•Close the cover of the dust bin before cleaning.

•Remove fragile or unnecessary objects from the room to be cleaned.

For example, remove expensive ceramics and valuables from the floor.

•Confirm whether the battery has sufficient power, and if it is low, recharge it.

•Close the doors of any room that you do not want the Robot Cleaner to enter.

During cleaning, the Robot Cleaner may enter another room and continue cleaning.

•Do not use this product in the room where a child is sleeping alone. The child can be hurt or woken.

•Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the brush.

•Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may cause it to malfunction.

•Please close any balcony doors as the wheels may get stuck while cleaning.

INCLUDED WITH PRODUCT

Robot Cleaner

Remote controller

Home station

s Figures can be different from actual objects.

Cleaning Tool	Dust bin filter (spare)	DVD Manual
	(option)
for cleaning
sensors
for cleaning
the filter
Cleaning brush	Mop plate (option)	Ultra microfiber mop
(It’s on the dust bin cover)		(2 pieces) (option)

Batteries for remote controller	Side brush (2 pieces)	Pet Brush
(2 units of AAA size)	(option)	(option)

PARTS DESCRIPTION - ROBOT CLEANER

Plan view

Upper camera sensor

Dust bin cover

Display & function buttons

Dust bin compartment release button

Front view

Ultrasonic sensors

Obstacle detecting sensor window Detecting

sensors of home station & Receiving sensors of remote controller

Rear view

Main Power switch

Ventilation port

Bottom view

Cliff detection sensors

Side brush

Charging terminals

Brush

Wheel

Battery housing

Lower camera sensor

s Figures can be different from actual objects.

PART DESCRIPTION – HOME STATION / DUST BIN

Home station

Remote controller holder

Charging terminal

Power switch

Power cord fixing hook

Dust bin

Dust bin handle

Cleaning brush

Dust bin cover

Suction port flap

Sponge filter

Dust bin lid opening button

EPA filter

Filter cover

s Figures can be different from actual objects.

BUTTON FUNCTIONS – ROBOT CLEANER

TURBO

START/STOP

MODE

HOME

BUTTON LOCK

On/Off

Language

Change

• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.

• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.

• Used to turn the power on from Standby, start or stop cleaning.

• If the button is pressed whilst the unit is powered ON, it will start cleaning.

• If button is pressed during the cleaning, it will stop the cleaning.

• If the button is pressed for about 2 sec. whilst the power is ON, the power will be returned to Standby.

• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.

• Used to change the clean mode setting.

• If the machine is at the Home Station, ‘Spot Clean’ option is not available.

• The 'My Space' mode can only be selected by remote control (when the

Robot Cleaner is not on the home station).

• Used to return the Robot Cleaner back to the home station for charging.

• If cleaning is finished or the battery is low, the Robot Cleaner will return to the Home Station by itself to recharge its battery.

• Pressing the ‘Turbo' and 'Mode' button for 3 seconds will activate or deactivate the Lock function.

• If 'Lock' is ON, a voice announcement "Key lock has already been set" will be heard each time a button is pressed.

• Pressing the ‘HOME’ button for 3 seconds will change the language for the voice message.

• You cannot use this function with the button on the remote controller.

BUTTON FUNCTIONS – REMOTE CONTROLLER

Power

Pressing this button will

turn the power on from Standby or the power will be returned to Standby

while the power is ON. (p17)

Mode

Changes the cleaning mode. (p20)

Directional button

This button enables

Manual Operation and selection of an area in 'My

Space cleaning' mode.

Repeat

This button allows activating or deactivating 'Repeat Cleaning' mode. (p23)

Schedule

Used to start cleaning at a scheduled time. Pressing the button for

3 sec. will cancel the scheduled cleaning.

Schedule Setting/Cancel options are available only in 'Charge' mode. (p25)

Clock

Used to set the current time indicated on the Robot Cleaner. (p24)

Home

Used to recharge the Robot

Cleaner by making it return to the

Home Station. (p18)

Turbo

Used to activate or deactivate 'Turbo' mode. (p23)

Start/Stop button

Pressing the button will Start or Stop the Robot Cleaner, or confirm a cleaning schedule or time setting.

My Space

Used to put the Robot Cleaner

in 'My Space clean' mode. (p21)

Mute

Used to activate or deactivate

'Mute' mode. (p12)

Diagnosis

Used to run Smart Diagnosis. Available only when Robot Cleaner is recharging. (p28)

Tip • With the machine's power OFF, the Remote Controller will not work.

• To turn the power ON/OFF, use the 'START/STOP' button on the upper section of the

Robot Cleaner or 'Power' button on the Remote Controller.

• The 'Mode', 'My Space' or 'Clock' button can only be used after stopping the Robot Cleaner or whilst it is charging on the Home station.

DISPLAY STATUS INFORMATION

Lock icon

Indicates whether 'Lock‘ is activated or not.

Schedule icon

Indicates the status of

Schedule/'Once reservation', or 'Daily reservation' setting.

Repeat cleaning

Displayed if the machine is in 'Repeat Cleaning' mode.

Zigzag cleaning

This icon is displayed to indicate Robot Cleaner is working in a Zigzag Clean.

Cell by Cell cleaning

This icon is displayed to indicate Robot Cleaner is working in a Cell by Cell cleaning mode.

Mute icon

This icon indicates whether the Mute is ON or OFF.

Battery icon

This icon indicates the residual battery level, it flashes if the battery needs recharging.

AM/PM icon

This indicates a.m. or p.m. according to the clock setting.

		Turbo icon
		This display
		illuminates if Turbo
		Mode is activated.
		Mode is activated.
		Homing icon
		This icon is displayed
		if Robot Cleaner is in
		'Homing' mode.
		My Space cleaning
		Is displayed when the
		Robot Cleaner runs
		My Space cleaning
		mode.
		Spot cleaning
Time display		This icon appears
This indicates the current		when Spot cleaning
and scheduled time.		is selected.

Tip • Once the clean mode is selected (Zigzag or Cell by Cell) it will be remembered even if the power is OFF.

•To cancel the reservation, please press the 'Schedule' button on the remote for 3 seconds while the Robot Cleaner is recharging.

+ 29 hidden pages