LG VSR6600OB operation manual
FEATURES
Corner Master
By having adopted a brand new concept design that is appropriate for walls,
the Robot Cleaner's cleaning performance is incredibly efcient.
Learning Mode
The Robot Cleaner is capable of memorizing the cleaning environment
via its Smart Operation feature for smarter cleaning.
Turbo Mode
In the Turbo mode, the Robot Cleaner operates the suction motor and the brushes
at a greater speed giving cleaner results.
Drawer Mop Plate (Selected models only (VR*.LVM))
The "Drawer mop plate" makes it much easier for users to t and remove the mop
without having to turn over the device over.
My Space Mode
By commanding it to clean a particular area, the Robot Cleaner quickly cleans
that desired area.
Repeat Cleaning
The Robot Cleaner will continuously clean until the battery runs out.
Location Search Function
If the Robot Cleaner is moved from a spot while operating, the device will automatically
search for the previous location and return to the spot from where it was interrupted.
CONTENTS
1
BEFORE USING
2~5
Safety precautions
6
Included with product
7~8
Parts description
9~10
Button functions
11
Display status information
12
Before you start
13
Overview
2
METHOD OF USE
14
How to install the home station
15
How to turn the Robot Cleaner power supply on & off
16
How to start and stop cleaning
17
How to charge the battery
18~19
Cleaning modes
20
Auxiliary cleaning modes
21
Mop cleaning
(Selected models only (VR*.LVM))
Location search function
22
Smart diagnosis
23~24
4
ADDITIONAL INFORMATION
31~33
34
Troubleshooting
Before you call for service
5
REFERENCE
35
Reference items
3
HANDLING METHOD AFTER USE
25
Cleaning the dust bin
26
Cleaning the dust bin lter
27
Cleaning the brush
28
Cleaning the sensors/charging terminals
29
Cleaning the side brush
30
Cleaning the ultra microber mop
(Selected models only (VR*.LVM))
SAFETY PRECAUTIONS
The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any
unexpected risk of injury or damage.
Basic safety precautions
After reading this manual, please keep it in an easily accessible location.
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage
and/or serious bodily harm or death.
WARNING
CAUTION
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
WARNING
1. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play
with the appliance.
3. If the supply cord is damaged, it must be replaced by LG
Electronics Service Agent in order to avoid a hazard
4. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance must not be made by children without supervision.
For your safety, do not remove the battery
from the Robot Cleaner. If you need to
replace the battery of the Robot Cleaner,
take it to the nearest authorized LG
Electronics service center or dealer for
assistance.
Failure to follow this warning can cause re
or product failure.
2
Never use the Robot Cleaner with a
battery and/or home station from any
other product than the
Robot Cleaner.
Doing so can cause re or product failure.
WARNING
Gasoline
Detergent
SAFETY PRECAUTIONS
Make sure the power cord of the home
station is not crushed under a heavy
object or damaged by contact with sharp
objects.
Failure to follow this warning can cause
electric shock, re or product failure. If the
power cord is broken, do not plug it in. Take
the product to an LG Electronics Authorised
service repairer.
Do not place the home station and the
Robot Cleaner near a heating device.
Doing so can cause product deformation,
re, or product failure.
Do not force the power plug to bend. Do
not use the power plug when it has been
damaged or loosened.
Doing so can cause re or product failure.
Do not touch the power plug with wet
hands.
Doing so can cause electric shock.
Do not use the Robot Cleaner when
candles or fragile objects are placed on
the oor.
Doing so can cause re or product failure.
Always use a dedicated power outlet with
a 10 amp rating.
If multiple appliances are connected to an
outlet simultaneously, they can generate
enough heat to cause a re.
When pulling out the home station power
plug, always pull it out by grabbing the
plug, not the cord. When pulling out the
power plug, do not to touch the prongs
with your ngers.
Doing so can cause an electric shock.
Do not allow children or pets to play with
or rest upon the Robot Cleaner at any
time. Do not use the Robot Cleaner while
an object is hanging from it.
Doing so can cause injury or product
damage.
Do not spray or use inammable materials,
surfactants, or drinking water in the
vicinity of the Robot Cleaner.
Doing so can cause re or product failure.
* Inammable materials: gasoline, thinner,
etc.
* Surfactant: detergent, articles for bath,
etc.
Do not insert any part of the body, such as
a hand or foot, below the brush or wheels
of the
Robot Cleaner while in use.
Doing so can cause injury or product
damage.
Do not operate the Robot Cleaner on
narrow and high furniture such as a
wardrobe, refrigerator, desk, table, etc.
Doing so can cause injury, product failure
or damage which is not covered by the
warranty.
Do not activate the device on a oor that
has more than a 10 degree incline.
The device may not work properly.
This product is intended for indoor domestic home use and
should not be used in mobile applications. it should not be used in
commercial applications such as workshops or garages or around
indoor swimming pools, etc.
Turn the power supply off immediately
if any abnormal sound, odor, or smoke
is generated from the Robot Cleaner by
removing it from the home station and
turning off the main switch on the rear
side of the unit.
Failure to do so can cause re or product
failure.
Do not operate the Robot Cleaner in a
room where a child is sleeping.
Doing so can cause injury or product
damage.
Do not leave Children or pets near the
Robot Cleaner unsupervised.
Doing so can cause injury or product
damage.
3
SAFETY PRECAUTIONS
CAUTION
Frequently empty the dust bin and
maintain its cleanliness.
The dust collected in the dust bin can
trigger allergies and may contain harmful
insects. it should be cleaned after each use.
Use the Robot Cleaner indoors only.
Using it outdoors can cause product failure
and irreparable damage to the unit.
Close the cover of the dust bin on the
main unit before starting cleaning.
If the cover is not closed, it can cause injury
or product damage.
DO NOT use the Robot Cleaner around a
banister, staircase or any other dangerous
place.
Doing so could cause injury or damage to
the unit.
Do not drop the Robot Cleaner or subject
it to strong impacts.
Doing so can cause injury or product failure
not covered by the warranty.
Do not expose the Robot Cleaner to cold
temperatures (less than -5 C) for a long
period of time.
Doing so can cause product failure.
Remove any cables or string from the oor
before starting.
Cable or string can get tangled in the
wheels of Robot Cleaner and cause product
failure or the cord of an appliance can be
disconnected.
Make sure the Robot Cleaner is not put on
a table or desk, with the power ON.
It may result in an injury or damage to the
product.
In rare cases, the Robot Cleaner’s brush
can damage carpet. If this happens,
immediately stop the cleaning operation.
When a carpet has long tassels, the tassels
can be damaged.
Do not let the main unit and charging
terminal of the home station come into
contact with metallic objects.
Doing so can cause product failure.
Do not put water, detergent, etc. into or
onto the Robot Cleaner.
Doing so can cause product failure. Do not
put any water or detergent on the Robot
Cleaner. If liquids get inside of the Robot
Cleaner, turn off the power supply and
contact an LG Electronics sales agent or
customer care center.
Do not allow the Robot Cleaner to sweep
up liquids, blades, thumb tacks, sharp
objects or ashes, hot or cold, etc.
These items can cause product failure or
damage.
Do not put sharp objects into the opening
of the Robot Cleaner’s ultrasonic sensors.
Doing so can cause product failure.
Do not use the Robot Cleaner when the
dust bin is completely full.
Doing so can cause product failure.
4
CAUTION
SAFETY PRECAUTIONS
Tip
If the oor is wet or has wet spots, wipe
them up before using the Robot Cleaner.
Do not use the Robot Cleaner on a wet
surface.
Doing so can cause product failure.
When attaching the mop, ensure that it is
tted correctly so that it does not block
the lower camera sensor.
Blocking the bottom camera sensor may
not allow the product to work correctly.
(Some models may not have the sensor.)
To save energy when the Robot Cleaner
is not in use for longer periods, turn off
the power switch, and turn on the power
switch again just prior to using the Robot
cleaner again.
When the robot cleaner is operating, it
may hit the chair leg, desk leg, table leg or
other narrow pieces of furniture.
For quicker and better cleaning, place the
dining chairs on top of the dining table.
NOTE: Very low thresholds will allow the
Robot cleaner to go over them and perhaps
into an undesirable location. Make sure that
all the doors of the rooms that are not to
be cleaned are closed.
Check the following items before use:
• Empty the dust bin after each operation or prior to it filling up.
• Remove any cables or long strings from the floor.
• Remove any moisture from the floor before cleaning.
• Close the cover of the dust bin before cleaning.
• Remove fragile or unnecessary objects from the room to be cleaned.
For example, remove expensive ceramics and valuables from the floor.
• Confirm whether the battery has sufficient power, and if it is low, recharge it.
• Close the doors of any room that you do not want the Robot Cleaner to enter.
During cleaning, the Robot Cleaner may enter another room and continue cleaning.
• Do not use this product in the room where a child is sleeping alone. The child can be hurt or woken.
• Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the brush.
• Before starting the device, it's better to remove carpets that are thicker than 20 mm
as they may cause it to malfunction.
• Please close any balcony doors as the wheels may get stuck while cleaning.
5
INCLUDED WITH PRODUCT
Robot Cleaner
Remote controller
Figures can be different from actual objects.
Cleaning Tool
Mop plate
(Selected models only (VR*.LVM))
for cleaning
sensors
Dust bin lter (spare)
(Optional)
Ultra microber mop (2 pieces)
(Selected models only (VR*.LVM))
Home station
DVD Manual
for cleaning
the lter
Cleaning brush
(It’s on the dust bin cover)
6
Batteries for remote controller
(2 units of AAA size)
Plan view
Front view
PARTS DESCRIPTION - ROBOT CLEANER
Upper camera sensor
Dust bin cover
Display & function buttons
Dust bin compartment release button
Ultrasonic sensors
Obstacle detecting sensor window Detecting
sensors of home station & Receiving sensors of
remote controller
Rear view
Bottom view
Figures can be different from actual objects.
s
Main Power switch
Ventilation port
Cliff detection sensors
Side brush
Charging terminals
Brush
Wheel
Battery housing
Lower camera sensor
(Optional)
7
PARTS DESCRIPTION – HOME STATION / DUST BIN
Home station
Remote controller holder
Charging terminals
Power switch
Dust bin
Dust bin lid
Suction port ap
Dust bin lid
opening button
Power cord xing hook
Dust bin handle
Cleaning brush
Sponge lter
EPA lter
s Figures can be different from actual objects.
8
Filter cover
BUTTON FUNCTIONS – ROBOT CLEANER
TURBO
START/STOP
HOME
BUTTON LOCK
On/Off
Voice Alert
On/Off
Language Change
• If the button is pressed, ‘TURBO Mode’ will be set with a voice confirmation.
• If the button is pressed whilst in ‘TURBO Mode’, it will be canceled.
• Used to turn the power on from Standby, start or stop cleaning.
• If the button is pressed whilst the unit is powered ON, it will start cleaning.
• If button is pressed during the cleaning, it will stop the cleaning.
• If the button is pressed for about 2 sec. whilst the power is ON, the power will be returned to
Standby.
• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.
• Used to return the Robot Cleaner back to the home station for charging.
• If cleaning is finished or the battery is low, the Robot Cleaner will return to the Home Station by
itself to recharge its battery.
• Pressing the ‘TURBO' and 'START/STOP' button for 3 seconds will activate or deactivate the Lock
function.
• If 'Lock' is ON, a voice announcement "Key lock has already been set" will be heard each time a
button is pressed.
• Press and hold both the 'START/STOP' and HOME button on the main unit for 3 sec. to turn ON/
OFF the Voice Alert.
• If the Voice Alert is OFF, the Mute lamp will be ON.
• Pressing the ‘HOME’ button for 3 seconds will change the language for the voice message.
• You cannot use this function with the button on the remote controller.
9
BUTTON FUNCTIONS – REMOTE CONTROLLER
Start
Pressing this button will start
the cleaning. (p16)
Mode
Change the Cleaning Mode of
Robot Cleaner to ZigZag Mode.
(p18)
Directional button
This button enables Manual
Operation and selection of an area
in 'My Space cleaning' mode.
Repeat
This button allows activating or
deactivating 'Repeat Cleaning'
mode. (p20)
Home
Used to recharge the Robot Cleaner by
making it return to the Home Station. (p17)
Turbo
Used to activate or deactivate
'Turbo' mode. (p20)
Stop/OK
Pressing the button will stop
the Robot Cleaner.
My Space
Used to put the Robot Cleaner in
'My Space clean' mode. (p19)
Mute
Used to activate or deactivate
'Mute' mode. (p11)
Diagnosis
Used to run Smart Diagnosis.
Available only when Robot Cleaner
is recharging. (p23)
10
Tip
• Remote Controller does NOT provide a Power ON function.
• With the machine's power OFF, the Remote Controller will not work.
• To turn the power ON/OFF, use the 'START/STOP' button on the upper section of the Robot Cleaner.
• The ‘Mode’ and ‘My Space’ button can only be used after stopping
the Robot Cleaner or whilst it is charging on the Home station.
Loading...