LG SOLARBANK 01 Users manual
CAUTION:
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference will not occur in a
parcular installaon. If this equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed
and operated with a minimum distance of 20cm between the radiator and your body.
Solarbank Package Contains:
2.0A Micro USB CableSolarbank by Solgaard AUX Cable
POWER BUTTON
(RESET BUTTON)
INDICATOR LEDS
MICRO USB PORT
1.0A STANDARD SPEED
USB PORT
AUX CABLE INPUT
SOLAR PANELSPEAKERS
2.4A HIGH SPEED USB PORT
TROUBLESHOOTING CONNECTION ISSUES
If you are having trouble connecng, it’s possible your friend has already
connected. If this is the case, turn bluetooth off on the other device, turn
bluetooth on with the desired device. Power the Solarbank down by
holding power buon for 2 seconds. Then aer it is off, turn back on by
pressing the power buon down for 2 seconds again. If it does not
connect automacally, go to the Bluetooth sengs on the desired device,
and connect by manually pressing to connect to ‘Solarbank by Solgaard’.
Factory reset
If none of the above is working, press and hold the on/off buon for 3 seconds to
reset the Solarbank. You will need to tell your phone to ‘forget this device’ in order to
re-establish a connecon between your device and your Solarbank.
USER MANUAL
Store the sun. Power your phone. Blast your tunes.
Francais/Español/Deutsch/Nederlands @ www.solgaard.co/manual
1. POWERBANK FUNCTION
Fully charge by connecng Micro USB port to a
a
USB wall charger with the included cable.
High Speed Charger
Normal Charger
Full Charge: approx 6hrs Full Charge: approx 10hrs
From full - Solarbank holds 6 full charges for a brand new smartphone.
a
Press the Power buon to check baery level.
d
= Full baery. = Time to charge up!
b
d
c
The upper large USB port will charge at 1a output, the
lower USB port will charge at high speed 2.4a output.
1A USB port 2.4A High Speed USB port
b
c
2. SOLAR POWER FUNCTION
LEDs indicate how much power you are harvesng from the sun.
The solar power generates power in sunlight best. However it can also
generate power in daylight with non-direct sunlight.
In ideal sunlight it will generate approximately 450Ah per hour.
To solar charge your smartphone:
We suggest to charge fully via USB, then solar keeps your powerbank topped up.
2 hours of good light per day and a 50% smartphone top up = endless power.
To charge Solarbank from 0-100% takes around 30 hours of ideal sunlight.
25% in 1 hour
100% in 4 hours
3. SPEAKERS FUNCTION
Over 100 Hours of Playback
Pairing by Bluetooth
TURN ON/TURN OFF
BLUETOOTH SEARCH MODE
In Bluetooth search mode the device will automacally connect to a recognized
device or it will stay in search mode unl you pair a new device.
Hold the power buon down for 2 seconds.
LED lights blinking.
AUX Mode
Connect AUX cable to disable Bluetooth mode and enter AUX mode.
We’ve made Solarbank as simple as possible for use. The single buon funcon
makes it very easy. Also, because of the massive baery, it means you’ll get over 100
hours of playback me via Bluetooth even if you don’t get any solar power. Any solar
power will give you even more music me!
CAUTION:
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt
RSS standard(s). Operaon is subject to the following two condions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modificaons or change to this equipment. Such modificaons or change
could void the user’s authority to operate the equipment.
This radio transmier (idenfy the device by cerficaon number or model number if
Category II) has been approved by Industry Canada to operate with the antenna types
listed below with the maximum permissible gain indicated. Antenna types not included in
this list, having a gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal installaon.
Loading...