LG SN11R Quick Guide

www.lg.com

SIMPLE MANUAL

LG Wi-Fi Sound Bar

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.

MODEL

SN11R

ENGLISH

MFL71698846

SN11R.DRUSLLK_SIMPLE_ENG_MFL71698846.indd 1 2020-03-10  9:19:33

Front Panel

1 (Standby) ············Switches the unit ON or OFF.

F (Function) ··························Selects function. p/o (Volume)······················Adjusts volume.

/ (Wi-Fi) ····················Selects Wi-Fi function.

Reset the Unit

Press and hold the / on the unit until you hear the beep sound once.

Rear Panel

USB (Service only)··········S/W download connector.

OPTICAL IN·············Connect to an optical device. HDMI OUT (TV eARC/ARC) ······· Connect to a TV. HDMI IN (1) / HDMI IN (2) ····················

Connect to device with HDMI OUT.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

a Connect the power cord of the sound bar and the

wireless subwoofer to the outlet.

b Turn on the sound bar.

• The sound bar and wireless subwoofer will be automatically connected. The subwoofer's green LED turns on.

Manually Subwoofer Connection

If the subwoofer does not make sound, try to connect manually.

a Press Pairing on the rear of the wireless

subwoofer.

• The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the Pairing.)

b Turn on the sound bar.

• Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.

Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.

1 m

!

Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.

SN11R.DRUSLLK_SIMPLE_ENG_MFL71698846.indd 2 2020-03-10  9:19:34

TV Connection

Network Connection

Connect the sound bar and TV using Optical ( ) or HDMI ARC ( ).

Optical Connection

a Connect the sound bar to the TV using Optical

cable.

b Set up [External Speaker (Optical)] on your TV

setting menu.

HDMI (TV eARC/ARC) Connection

a Connect the sound bar to the TV using HDMI

cable.

b Set up [External Speaker (HDMI ARC)] on your

TV setting menu.

• HDMI connection is unavailable if your TV does not support HDMI ARC.

• If this unit is connected by OPTICAL and ARC at the same time, the ARC signal has a higher priority.

Additional Device Connection

a Connect to the external device like as follow.

a

c

b

a Check network condition. A router connected to

network should be installed.

b Connect your smart device to your home

network.

c Connect the sound bar to the power supply.

All devices should be connected to same router.

Step.1 Install “Google Home” App

Download the Google Home App from the Google Play or App Store.

Step.2 Set up the Wi-Fi connection with app

a Connect your smart device to the Wi-Fi network

that you’ll use for your unit.

In case of iOS devices, it should be turned on Bluetooth setting on your smart device.

b Launch the “Google Home” app. c Follow the steps for Wi-Fi connection on the app.

• When the unit is properly connected to Wi-Fi, “CONNECTED” will appear on the display window with sound.

(Set-top Box, Player etc.)

OR

b Set the input source by pressing F repeatedly.

SN11R.DRUSLLK_SIMPLE_ENG_MFL71698846.indd 3 2020-03-10  9:19:35

• When connect to Wi-Fi, this app may request to create a Google Account. You will need a Google account to use this app.

• “Google Home” app is provided by Google. It might be revised by a change of Google Policy.

Remote control

Additional Information

Replacement of Battery

SOUND EFFECT: Selects a sound effect mode.

- TV remote: Long press SOUND EFFECT and press it again to use TV remote control.

8: Turns on or off the Night time mode.

J:Displaystheinformationofale,aninput

source, a connected Bluetooth device name or an application name.

- Auto Power ON/OFF: Long press J and press it again.

: Adjusts sound level of each speaker.

- Surround sound: Long press again.

: This button is not available.

*

and press it

Additional

Download LG Wi-Fi Speaker Application

You can manage the speaker settings and control the speaker by using “LG Wi-Fi Speaker”.

Download “LG Wi-Fi Speaker” on the App Store or Google Play Store.

Specication

Power requirements

Power consumption

Dimensions (W x H x D)

Amplier (Total RMS Output power)

Designandspecicationsaresubjecttochange

without notice.

Refer to the main label.

Networked standby : 6.5 W (If all network ports are

activated.) Approx.

1443.0 mm x 63.0 mm x

146.0 mm (with foot)

770 W RMS

Rear Surround sound

Wireless Rear Speakers Kit included for real surround sound. (SPN11-SL / SPN11-SR)

How to disconnect the wireless network connection or the wireless device

Turn off the unit by pressing the power button for more than 3 seconds.

AI Room calibration

AI Room Calibration is a sound tuning tool, which adjusts the audio settings of the Sound Bar based on the room acoustics and environment.

To access the AI Room Calibration it is necessary to install the “LG Wi-Fi Speaker” app. On [My Speaker] menu, click setting icon and choose [AI Room Calibration].

SN11R.DRUSLLK_SIMPLE_ENG_MFL71698846.indd 4 2020-03-10  9:19:36

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Declaration of Conformity

Hereby, LG Electronics declares that the radio equipment type Wi-Fi SOUND BAR is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

http://www.lg.com/global/support/cedoc/cedoc#

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

SN11R.DRUSLLK_SIMPLE_ENG_MFL71698846.indd 5 2020-03-10  9:19:36

Қытайда жасалған

Қазақстан Республикасы

Импорттаушы АҚ “ЭЛ Джи Электроникс Алматы Қазақстан”, 050061, Алматы қ., Көкорай көшесі, 2А/9

Өндірушінің мекенжайы: LG Electronics(Huizhou) Inc. Huitai Factory

516006, Қытай, ГуанДонг ауданы, Хужоу қаласы, Жонгкай өнеркәсіптік аймағы, Хутай Индустриялық саябағы, ХуФенг Донг Уи Роуд, 13.

Қазақстан Республикасы территориясында тұтынушылардан келіп түскен талаптар мен ұсыныстарды қарайтын және тауарды жөндеу мен техникалық қызмет көрсететін ұжым:

АҚ «Эл Джи Электроникс Алматы Казақстан», 050061, Қазақстан Республикасы, Алматы қ., Көкорай көшесі, 2А/9. Басқа сервис орталықтары жайында мағлұматты “Тұтынушыға қызмет көрсету орталығына” телефон шалу арқылы білуге болады.

Импортер ООО “ЛГ Электроникс Рус”

Адрес импортера: 143160 Российская Федерация, Московская область, Рузский район, сельское поселение

Дороховское, 86 км. Минского шоссе, д.9

Адрес производителя : ЛГ Электроникс (Хужоу) Инк., завод Хатаи

516006, Китай, пров. ГуанДонг, г. Хужоу, Промышленная зона Жонгкай, Индустриальный парк Хутаи, ХуФенг Донг Уи Роуд, 13.

Российская Федерация

Сделано в Китае

Вироблено в: ЛГ Електронікс (Хужоу) Інк., завод Хатай

516006, Китай, пров. ГуанДонг, м. Хужоу, Промислова зона Жонгкай, Індустріальний парк Хутай, ХуФенг Донг Уі Роуд, 13.

Україна

SN11R.DRUSLLK_SIMPLE_ENG_MFL71698846.indd 6 2020-03-10  9:19:36

SIMPLE MANUAL

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.

MODEL

SPN11-SL, SPN11-SR

www.lg.com

Wireless Rear Speakers Kit

MFL71698911

ENGLISH

SPN11-SL_SPN11-SR.DRUSLLK_SIMPLE_ENG_MFL71698911.indd 1 2020-03-10  9:23:54

Wireless Rear speakers connection

Additional Information

a Connect the power cord of the wireless rear

speakers to the outlet.

b Turn on the main unit: The sound bar and wireless

rear speakers will be automatically connected. The green LED on the wireless rear speakers turns on.

Manually pairing wireless rear speakers

When your connection is not completed, you can see the red LED on the wireless rear speaker and the speaker does not make sound. Try to connect manually.

a Press PAIRING on the rear of the wireless rear

speaker. (If the green LED does not blink, press and hold the PAIRING.)

• The green LED on the wireless rear speaker blinks quickly.

b Turn on the main unit

• Paring is completed. The green LED on the wireless rear speaker turns on.

Surround Sound On/Off

When you turn on surround function, you can enjoy

magnicentsurroundsoundforalltheinputsound

source with rear speakers.

The initial setting for the surround function is OFF, turn the surround function ON to use it.

Specication (Each speaker)

Power requirements

Power consumption

Dimensions (W x H x D)

Designandspecicationsaresubjecttochange

without notice.

Refer to the main label.

Approx.

130.0 mm x 211.5 mm x

191.2 mm (with foot)

Declaration of Conformity

Hereby, LG Electronics declares that the radio equipment type ACTIVE REAR SPEAKER is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

http://www.lg.com/global/support/cedoc/cedoc#

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

Surround On: Press and hold button on the remote control about 3 seconds and then press button repeateadly to select ON - SURROUND in the display window.

Surround Off: Press and hold remote control about 3 seconds and then press button repeateadly to select OFF - SURROUND in the display window.

SPN11-SL_SPN11-SR.DRUSLLK_SIMPLE_ENG_MFL71698911.indd 2 2020-03-10  9:23:54

button on the

SPN11-SL_SPN11-SR.DRUSLLK_SIMPLE_ENG_MFL71698911.indd 3 2020-03-10  9:23:55