OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating your set and retain it for future reference.
TYPE : WALL MOUNTED
2.0
MODELS : |
|
|
|
S05LPBX 2 |
S07LPBX 2 |
S09LPBX 2 |
S12LPBX 2 |
S05LVX 2 |
S07LVX 2 |
S09LVX 2 |
S12LVX 2 |
P/NO : MFL67104806 |
www.lge.com |
Room Air Conditioner Owner’s Manual
TABLE OF CONTENTS
A. Safety Precautions.............................. |
3 |
B. Electrical Safety................................... |
6 |
Temporary Use of an Adapter ............... |
6 |
Temporary Use of an Extension Cord ... |
6 |
Symbols used in this Manual................. |
6 |
C. Product Introduction........................... |
7 |
Indoor Units ........................................... |
7 |
Operation Indication Lamps .................. |
7 |
Outdoor Unit .......................................... |
7 |
D. Operating Instructions........................ |
8 |
How to insert the Batteries .................... |
8 |
Wireless Remote Controller |
|
Maintenance.......................................... |
8 |
Operating Method.................................. |
8 |
Wireless Remote Controller................... |
9 |
Operation Mode................................... |
10 |
Healthy Dehumidification Operation.... |
11 |
Artificial Intelligence |
|
(Cooling Only Model)........................... |
11 |
Auto Changeover Operation |
|
(Heat Pump Model) ............................. |
11 |
Jet Cool/Heat Operation...................... |
12 |
NEO PLASMA Purification Operation |
|
(Optional)............................................. |
12 |
Auto Clean (Optional).......................... |
12 |
Energy-Saving Cooling Mode |
|
(Optional)............................................. |
13 |
Forced operation ................................. |
13 |
Display Luminosity (Optional).............. |
13 |
Sleep Mode ......................................... |
14 |
Setting the Current Time ..................... |
14 |
Timer Setting ....................................... |
14 |
Horizontal Vane Control (Optional)...... |
15 |
Vertical Vane Control (Optional) .......... |
15 |
Air Circulation Mode ............................ |
15 |
Auto Restart Function.......................... |
15 |
E. Maintenance and Service.................. |
16 |
Indoor Unit........................................... |
16 |
Outdoor Unit ........................................ |
17 |
Operation Tips!.................................... |
17 |
Self-Diagnosis Function ...................... |
17 |
Troubleshooting Tips! |
|
Save time and money!......................... |
18 |
Call the service immediately in the |
|
following situations .............................. |
18 |
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.
You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call for service at all.
PRECAUTION
•Contact the authorized service technician for repair or maintenance of this unit.
•Contact the installer for installation of this unit.
•The air conditioner is not intended for use by young children or invalids without supervision.
•Young children should be supervised to ensure that they do not play with the air conditioner.
•When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts.
2 Room Air Conditioner
Safety Precautions
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed.
•Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage.
• Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
Alwaysuseapowerplugandsocketwith agroundterminal.
•Thereisariskofelectricshock.
Forelectricalwork,contactthedealer,seller, aqualifiedelectrician,oranAuthorized ServiceCenter.Donotdisassembleorrepair theproductbyyourself.
•Thereisriskoffireorelectricshock.
Usethecorrectlyratedbreakerorfuse.
•Thereisriskoffireorelectricshock.
Donotinstalltheproductonadefective installationstand.Besurethat the installationareadoesnotdeterioratewith age.
•Itmaycauseproducttofall.
Inoutdoorunitthestep-upcapacitor supplieshighvoltageelectricitytothe electricalcomponents.Besureto dischargethecapacitorcompletely beforeconductingtherepairwork.
•Anchargedcapacitorcancauseelectrical shock.
Donotuseadefectiveorunderrated circuitbreaker.Usethecorrectlyrated breakerandfuse.
•Thereisriskoffireorelectricshock.
Alwaysgroundtheproductasperthe wiringdiagram.Donotconnectthe groundwiretogasorwaterpipes lighteningrodortelephonegroundwire.
•Thereisriskoffireorelectricshock.
Donotmodifyorextendthepowercable. Ifthepowercableorcordhasscrathesor skinpeeledoffordeterioratedthenit mustbereplaced.
•Thereisriskoffireorelectricshock.
Neverinstalltheoutdoorunit ona movingbase oraplacefrom where it canfalldown.
•Thefallingoutdoorunitcancausedamageor injuryorevendeathofaperson.
Donotuseamulticonsent.Alwaysuse thisapplianceonadedicatedcicuitand breaker.
•Otherwiseitcancauseelectricshockorfire.
Installthepanelandthecoverofcontrol boxsecurely.
•Thereisriskoffireorelectricshockdueto dust,wateretc.
Forinstallation,removalorreinstall, alwayscontactthedealeroran AuthorizedServiceCenter.
•Thereisriskoffire,electricshock,explosion, orinjury.
Whentheproductissoaked(floodedor submerged)inwater,contactan AuthorizedServiceCenterforrepair beforeusingitagain.
•Thereisriskoffireoreletricshock.
Wheninstallingtheunit,usethe |
Besuretouseonlythose partswhich |
installationkitprovidedwiththeproduct. |
are listedinthesvc partslist.Never |
|
attempttomodifytheequipment. |
•Otherwisetheunitmayfallandcausesevere |
•Theuseofinappropriatepartscancausean |
injury. |
electricalshock,excessiveheatgenerationor |
|
fire. |
Owner's Manual 3
Safety Precautions
Indoor/outdoor wiring connections must be secured tightly and the cable should be routed properly so that there is no force pulling the cable from the connection terminals.
•Improper or loose connections can cause heat generation or fire.
Be sure to check the refrigerant to the used. Please read the label on the product.
Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after installation or svc and then tear away and thraw away the plastic packaging bags.
•Children may play with them and cause injury.
Don't use a power cord, a plug or a loose socket which is damaged.
•Incorrect refrigerant used can prevent the normal operation of the unit.
Do not place a heater or other heating appliances near the power cable.
•There is risk of fire and electric shock.
•Otherwise it may cause a fire or electrical shock.
Do not allow water to run into electric parts. Install the unit away from water sources.
•There is risk of fire, failure of the product, or electric shock.
Do not use the product in a tightly closed |
Do not open the front grille of the product |
space for a long time. Perform ventilation |
during operation. (Do not touch the |
regularly. |
electrostatic filter, if the unit is so equipped.) |
• Oxygen deficiency could occur and hence |
• There is risk of physical injury, electric shock, |
harm your health. |
or product failure. |
Ventilate the product room from time to |
Turn the main power off and unplug the |
time when operating it together with a |
unit when cleaning or repairing the |
stove, or heating element etc. |
product. |
• Oxygen deficiency can occur and hence harm |
• There is risk of electric shock. |
your health. |
|
Take care to ensure that nobody |
Take care to ensure that power cable |
especially kids could step on or fall onto |
could not be pulled out or damaged |
the outdoor unit. |
during operation. |
• This could result in personal injury and |
• There is risk of fire or electric shock. |
product damage. |
|
Make sure to check that the power cable plug is not dirty, loose or broken and then only insert the plug completely.
•Dirty, loose or broken power plug can cause electric shock or fire.
Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking out
•There is risk of electric shock or fire.
Do not store or use or even allow flammable gas or combustibles near the product.
•There is risk of fire.
If strange sounds, smell or smoke comes from product.Immediately turn the breaker off or disconnect the power supply cable.
•There is risk of electric shock or fire.
When the product is not to be used for a long time, disconnect the power supply plug or turn off the breaker.
•There is risk of product damage or failure, or unintended operation.
Do not place ANYTHING on the power cable.
•There is risk of fire or electric shock.
Do not plug or unplug the power supply plug to turn the unit ON/OFF .
• There is risk of fire or electric shock.
When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.
•Do not use the telephone or turn switches on or off. There is risk of explosion or fire.
Two or more people must lift and transport the product.
•Avoid personal injury.
Keep level even when installing the product.
•To avoid vibration or noise.
Do not install the product where it will be exposed to sea wind (salt spray) directly.
•It may cause corrosion on the product.
Do not install the product where the noise or hot air from the outdoor unit could damage or disturb the neighborhoods.
•It may cause a problem for your neighbors and hence dispute.
Install the drain hose to ensure that the condensed water is drained away properly.
•A bad connection may cause water leakage.
Always check for gas (refrigerant) leakage after installation or repair of product.
•Low refrigerant levels may cause failure of product.
4 Room Air Conditioner
Donotusetheproductforspecialpurposes, suchaspreservingfoods,worksofart,etc.It isaconsumerairconditioner,notaprecision refrigerationsystem.
•Thereisriskofdamageorlossofproperty.
Donottouchthemetalpartsofthe productwhenremovingtheairfilter.
•Thereisriskofpersonalinjury.
Donotinserthandsorotherobjects throughtheairinletoroutletwhilethe product isoperating.
•Therearesharpandmovingpartsthatcould causepersonalinjury.
Donottilttheunitwhenremovingor uninstallingit.
•Thecondensedwaterinsidecanspill.
Dismantlingtheunit,treatmentofthe refrigerantoilandeventualpartsshould bedoneinaccordancewithlocaland nationalstandards.
Iftheliquidfromthebatteriesgetsonto yourskinorclothes,washitwellwith cleanwater.Donotusetheremoteifthe batterieshaveleaked.
•Thechemicalsinbatteriescouldcauseburns orotherhealthhazards.
Ifyoueattheliquidfromthebatteries, brushyourteethandseedoctor.Donot usetheremoteifthebatterieshave leaked.
•Thechemicalsinbatteriescouldcauseburns orotherhealthhazards.
Donotblocktheinletoroutletofairflow.
•Itmaycauseproductfailure.
Donotsteponorputanytingonthe product.(outdoorunits)
•Thereisriskofpersonalinjuryandfailureof product.
Becautiouswhenunpackingand installingtheproduct.
•Sharpedgescouldcauseinjury.
Donotmixairorgasotherthanthe specifiedrefrigerantusedinthesystem.
•Ifairenterstherefrigerantsystem,an excessivelyhighpressureresults,causing equipmentdamageorinjury.
Replacetheallbatteriesintheremote controlwithnewonesofthesametype. Donotmixoldandnewbatteriesor differenttypesofbatteries.
•Thereisriskoffireorproductfailure.
Donotlettheairconditionerrunfora longtimewhenthehumidityisveryhigh andadoororawindowisleftopen.
•Moisturemaycondenseandwetordamage furniture.
Donotdrinkthewaterdrainedfromthe product.
•Itisnotsanitaryandcouldcauseserious healthissues.
Safety Precautions
Useasoftclothtoclean.Donotuse harshdetergents,solventsorsplashing wateretc.
•Thereisriskoffire,electricshock,ordamage totheplasticpartsoftheproduct.
Alwaysinsertthefiltersecurelyafter cleaning.Cleanthefiltereverytwoweeks ormoreoftenifnecessary.
•Adirtyfilterreducestheefficiency.
Ifthe refrigerantgasleaksduringthe repair,donottouchtheleakaing refrigerantgas.
•Therefrigernatgascancausefrostbite(cold burn)
Iftherefrigerantgasleaksduringthe installation,ventilatetheareaimmediately.
•Otherwiseitcanbeharmfullforyourhealth.
Donotrechargeordisassemblethe batteries.Donotdisposeoffbatteriesin afire.
•Theymayburnorexplode.
Donotexposeyourskin orkidsor plantstothecoolorhot airdraft.
•Thiscouldharmtoyourhealth.
Useafirmstoolorladderwhencleaning, maintainingorrepairing theproductat anheight.
•Becarefulandavoidpersonalinjury.
Owner's Manual 5
Electrical Safety
Electrical Safety
• This appliance must be properly grounded.
To minimize the risk of electric shock, you must alway plug into a grounded oulet.
•Do not cut or remove the grounding prong from the power plug.
•Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the house wiring.
•If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and circuit checked by a quali ed electrician.
Temporary Use of an Adapter
We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections, use only a genuine adapter, available from most local hardware stores. Ensure that the large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection.
To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal damage.
• Never use the appliance with a broken adapter.
Temporary Use of an Extension Cord
We strongly discourage the use of an extension cord due to potential safety hazards.
This appliance should be installed in accordance with national wiring regulations. This guide acts as a guide to help to explain product features.
Symbols used in this Manual
NOTE
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the air conditioner.
This symbol indicates special notes.
6 Room Air Conditioner
Product Introduction
Product Introduction
Here is a brief introduction of the indoor and outdoor units. Please see the information specific to your indoor unit type.
Indoor Units
Air inlet
Plasma lter (Optional)
Air lter |
ON/OFF button |
|
F
Operation lamp Signal Receiver
Air outlet |
Horizontal vane |
|
Vertical louver |
Allergy free lter (Optional) |
Operation Indication Lamps
•Power : 'Power' lamp lights up during Cooling Operation
•Timer : 'Timer' lamp lights up during Timer Operation
•Outdoor : 'Outdoor' lamp lights up during Puri er Operation
During Air Circulation Operation, 'Power' lamp lights up.
While Outdoor operates with Air Circulation Operation, ‘Power’lamp and ‘Outdoor’ lamp lights up at the same time.
Outdoor Unit
Air intake vents |
Connecting |
|
|
|
wires |
|
Refrigerant pipes |
Air outlet vents |
|
Base plate |
Drain hose |
Owner's Manual 7
Product Instructions
Operating Instructions
How to insert the Batteries
1. Remove the battery cover by pulling it according to the arrow direction.
2. Insert new batteries making sure that the (+) and (-) of battery are installed correctly.
3. Reattach the cover by sliding it back into position.
NOTE
1.Always use/replace both batteries of same type.
2.If the system is not to be used for a long time, remove the batteries to save their working life.
3.If the display screen of remote controller starts, fading replace both of the batteries.
4.Use 2 AAA(1.5 volt) batteries.
Wireless Remote Controller Maintenance
1.Choose a suitable place where its safe & easy to reach.
2.Fix the holder to wall etc with the supplied screws rmly.
3.Slide the remote controller inside the holder.
NOTE
1. Remote controller should never be exposed to direct sunlight.
2.Signal transmitter & receiver should always be clean for proper communication. Use a soft cloth to clean them.
3.In case some other appliances also get operated with remote control, change their position or consult your serviceman.
Operating Method
1. The signal receiver is inside the unit.
2.Aim the remote controller towards the unit to operate it. There should not be any blockage in between.
8 Room Air Conditioner
Wireless Remote Controller
The controls will look like the following.
Signal transmitter
C
F
AM |
ON |
hr. PM |
OFF 123 |
4 |
|
|
|
16 |
PLASMA |
E/SAVING |
A/CLEAN |
15 |
|
|
|
|
|
3 |
1 |
ON |
|
MODE |
2 |
OFF |
|
|
|
TEMP |
|
|
|
5 |
FAN |
|
JET |
6 |
|
SPEED |
|
COOL |
|||
13 |
|
|
ROOM |
14 |
|
SWING |
SWING |
12 |
|||
TEMP |
|||||
|
|
TIMER |
|
7 |
|
11 |
SLEEP |
ON |
OFF |
8 |
|
17 |
|
SET |
|
10 |
|
|
|
9 |
|||
|
CLEAR |
|
|||
|
LIGHT |
TIME [3SEC] |
|
|
Operation Mode
Cooling Operation
Artificial Intelligence or Auto changeover |
AI |
Healthy Dehumidification Operation
Heating Operation
Air Circulation
• Cooling Model(), Heat Pump Model(
)
1.START/STOP BUTTON
Used to turn off/on the unit.
2.OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
3.ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
4.PLASMA BUTTON (OPTIONAL)
Used to start or stop the plasma-purification function.
5.INDOOR FAN SPEED SELECTOR BUTTON
Used to select fan speed in four steps low, medium, high and CHAOS.
6.JET COOL BUTTON
Used to start or stop the speed cooling.
(It operates fan in super high speed in cooling mode)
7.ON TIMER BUTTONS
Used to set the time of starting operation.
8.OFF TIMER BUTTONS
Used to set the time of stopping operation.
9.TIME SETTING BUTTONS
Used to adjust the time.
10.TIMER SET/CLEAR BUTTON
Used to set and clear timer operation.
11.SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
12.ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
13.VERTICAL AIRFLOW DIRECTION CONTROL (OPTIONAL)
Used to set the desired vertical airflow direction.
14.HORIZONTAL AIRFLOW DIRECTION CONTROL (OPTIONAL)
Used to set the desired horizontal airflow direction.
15.AUTO CLEAN BUTTON(OPTIONAL)
Used to set auto clean mode.
In some models this button has a 2nd function of LED luminosity control.
16.ENERGY-SAVING COOLING MODE BUTTON (OPTIONAL)
Used to set energy-saving cooling mode operation.
17.LCD LUMINOSITY BUTTON (OPTIONAL)
Used to open and close LCD luminosity.
Owner’s Manual 9
Operating Instructions
Operation Mode
|
CC |
|
|
F |
|
AM |
ON |
|
hr. PM |
OFF |
123 |
PLASMA E/SAVING
A/CLEAN
ON |
MODE |
|
OFF |
||
|
||
|
TEMP |
|
FAN |
JET |
|
SPEED |
COOL |
|
SWING |
ROOM |
|
TEMP |
||
|
TIMER |
1 |
Press the START/STOP BUTTON to |
|
turn the unit on. |
ON |
|
|
The unit will respond with a beep. |
OFF |
|
2 |
Open the door of the remote controller and press the |
|
|||
|
operation mode button. Each time the button is pressed, the |
|||||
|
|
operation mode is shifted in the direction of the arrow. |
|
|||
1 |
MODE |
|
C |
|
C |
|
2 |
|
|
|
|
|
|
3 |
|
Cooling |
Artificial |
Healthy |
Heating |
Air Circulation |
|
|
|
intelligence |
Dehumidification |
(Heat pump model only) |
|
4 |
Artificial Intelligence (Cooling Only Model) |
|
Auto Changeover (Heat Pump Model) |
||
|
SLEEP
3
ON |
OFF |
|
For |
cooling or heating operation set the desired indoor |
|
temperatureSET |
by pressing the ROOM TEMPERATURE |
|
CLEAR |
|
|
SETTING BUTTONS. |
For cooling the temperature can be set within 18°C-30°C and for heating the temperature range is 16°C-30°C
To raise the temperature
TEMP
|
To lower the temperature |
4 |
Set the fan speed with the remote controller. You can select the fan speed in four steps-low, |
medium, high and CHAOS by pressing the INDOOR FAN SPEED SELECTOR BUTTON. |
Each time the button is pressed, the fan speed mode is shifted.
FAN |
|
SPEED |
|
CHAOS Air |
Fan speed is on low. Fan speed is on medium. Fan speed is on high. |
Natural wind by the CHAOS logic
For fresher feeling, press the INDOOR FAN SPEED SELECTOR BUTTON selector and set to CHAOS mode.
In this mode, the wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.
10 Room Air Conditioner
Operating Instructions
Healthy Dehumidification Operation
Healthy
Dehumidification
MODE
During Healthy Dehumidification Operation
If you select the dehumidification mode on the OPERATION MODE
SELECTION BUTTON, the product starts to run the dehumidification function. It automatically sets the room temperature and airflow volume to the best condition for dehumidification, based on the sensed current room temperature.
In this case, however, the setting temperature is not displayed on the remote controller and you are not able to control the room temperature either.
During the healthy dehumidification function, the airflow volume is
automatically set according to the optimization algorithm responding to the current room temperature status, so that the room condition is kept healthy and comfortable even in the very humid season.
To run the healthy dehumidification mode follow steps 1, and 2 and 4
(See operation mode)
Artificial Intelligence (Cooling Only Model)
Artificial intelligence function judges and operates the set temperature and fan level based room temperature to provide pleasant environment to the user. Artificial intelligence can be categorized largely into cool and dehumidifier artificial intelligence. If the user selects artificial intelligence function during cool operation, it operates in cool artificial intelligence.
if the user selects during dehumidifier operation, it operates in dehumidifier artificial intelligence.
Artificial
Intelligence
|
Room temperature |
|
Set temperature |
|
|
Room temperature < 18 |
ºC |
18 ºC |
|
18 |
ºC ≤ Room temperature < 22 |
ºC |
Room temperature |
|
22 |
ºC ≤ Room temperature < 24 |
ºC |
Room temperature |
-0.5 ºC |
24 |
ºC ≤ Room temperature < 26 ºC |
Room temperature |
-1ºC |
|
|
Room temperature ≥ 26 ºC |
25 ºC |
|
|
|
|
|
|
|
To run the auto operation follow steps 1, and 2. (See operation mode)
Auto Changeover Operation (Heat Pump Model)
C
Auto operation basically is heating or cooling function of the air conditioner.
But during this operation the controller changes the operation mode automatically to keep the temperature within ±2°C with respect to the setting temperature.
Auto
Changeover
To run this operation follow steps 1, 2, 3, and 4. (See operation mode)
Owner’s Manual 11
Operating Instructions
Jet Cool/Heat Operation
Jet cool function can be used to cool the room quickly in hot summer. When this function is turned on, the air conditioner runs in cooling operation mode with super high fan speed and 18°C setting temperature for 30 minutes for fast and effective cooling.
Similarly, jet heat function (available only in some models) warms up the room quickly by operating at super high fan speed and 30°C setting temperature for 60 minutes.
You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or
INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.
NOTE
JET
COOL
•Jet cool function cannot be activated during heating or auto changeover operations.
•In case of Inverter, Art Cool and Art Cool Wide(non-Deluxe) model, you can use jet heat function by pressing JET COOL BUTTON for heating operation.
•Art Cool and Art Cool Wide models close the side discharges during jet cool/heat operation, for strong cooling and heating.
NEO PLASMA Purification Operation (Optional)
C
Plasma filter is a technology developed by LG to get rid of microscopic contaminants in the intake air by generating a plasma of high charge electrons. This plasma kills and destroys the contaminants completely to provide clean and hygienic air.
Plasma purification can be started by pressing the PLASMA BUTTON on the remote controller. Repressing it will deactivate the operation. PLASMA
NOTE
This feature can be used in any operation mode and any fan speed can be used while plasma filter is functioning.
Auto Clean (Optional)
During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification operation can be removed.
|
1. Press the AUTO CLEAN BUTTON to activate this function. |
A/CLEAN |
2. Now whenever the unit is turned off, the indoor fan is still running for about 30 |
|
minutes internally without cooling or dehumidification operation. Also the louver is |
|
closed. |
3.This dries up any remains of moisture & cleans the unit internally.
4.If you press AUTO CLEAN BUTTON again during operation, this function is
NOTE cancelled.
During auto clean function, only START/STOP BUTTON, PLASMA BUTTON and AUTO CLEAN BUTTON can be used.
12 Room Air Conditioner