LG PWLSSB21H Owner's Manual

OWNER’S & INSTALLATION MANUAL

AIR

ENGLISH ESPAÑOL FRANÇAIS

TÜRKÇE

Please read this manual carefully before operating your set and retain it for future reference.

CONDITIONER

Wireless Remote Controller Original instruction

LG Electronics Inc. Manufacturer : LG Electronics Inc. Changwon 2nd factory, 84, Wanam-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA

www.lghvac.com

MFL70585316

Rev.00_061720

www.lg.com

Safety instructions

Table of Contents

ENGLISH

Safety instructions ................................3

Operating instruction............................4

How to insert the batteries .......................................4

Wireless remote controller maintenance..................4

Operating method ....................................................4

Part description .....................................5

Owner's Instruction...............................6

Cooling Mode - Standard Operation ........................6

Cooling Mode - Power Cooling ................................6

Auto Operation Mode...............................................6

Auto Changeover Mode ...........................................7

Auto Changeover Mode - Setting the Mode Change

Temperature.............................................................7

Dehumidification Mode ............................................8

Heating Mode - Standard Operation ........................8

Heating Mode - Power Heating................................9

Fan Mode.................................................................9

Temperature Setting/Room

Temperature checking ........................10

Airflow Setting .....................................11

Up/Down Airflow Direction Control (Optional) ........11

Left/Right Airflow Direction Control (Optional)........11

Indirect Wind ..........................................................11

Direct Wind.............................................................11

Smart Mode ...........................................................12

Refresh Mode ........................................................12

Sub function ........................................13

Air Purification (Optional) .......................................13

Smart Indicator (Air Quality) Always On Setting

(Optional) ...............................................................13

Auto Clean (Optional) ............................................13

Energy Saving Cooling (Optional)..........................13

Smart Clean (Optional) ..........................................14

Brightness Setting (Optional) .................................14

Celsius/Fahrenheit Switching.................................14

Electric heater (Optional) .......................................14

Individual vane angle control (Optional).................15

Comfort Cooling (Optional) ....................................15

Timer.....................................................16

Setting the Current Time........................................16

Sleep Timer Setting................................................16

On Timer Setting ....................................................16

Off Timer Setting ....................................................16

To cancel the Timer Setting....................................16

Installation instructions......................17

Setting address of central control ..........................17

Checking address of central control.......................17

How to enter installer setting mode........................17

Installer setting code table .....................................18

2 3

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

This symbol is displayed to indicate matters and operations that can cause risk.

Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

WARNING

Installation

• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new batteries or different types of batteries. There is risk of fire or explosion.

• Do not disassemble, repair, or modify the product at your discretion in order to prevent fire or an electric shock.

Operation

• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or explode.

• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

• Push the button at one time. There will be no operation if you several buttons at one time.

•

Do not drop or throw the remote controller. Do not give any strong impact and step on it.

• Do not use this at the moisture and humidity places.

• Do not use this at heating and firing conditions.

• Do not place the remote controller in a location exposed to direct sunlight

• Aim at the signal receptor on the wiress remote controller so as to operate

• The remote control signal can be received at a distance of up to about 7m

• Be sure that there are no obstructions between the remote controller and the signal receptor

CAUTION

Installation

• If anyone other than a licensed Professional installs, repairs, or alters LG Electronics air conditioning products, the warranty is voided.

- All costs associated with repair are

then the full responsibility of the owner.

• Do not install the unit in potentially explosive atmospheres.

ENGLISH

Operating instruction

ENGLISH

How to insert the batteries

Remove the battery cover by pulling it

according to the arrow direction.

Insert new batteries making sure that the (+)

and (-) of battery are installed correctly.

Reattach the cover by sliding it back into

position.

Wireless remote controller maintenance

Choose a suitable place where its safe & easy

to reach.

Fix the holder to wall etc with the supplied

screws firmly.

Slide the remote controller inside the holder.

Part description

Part Description

LCD

Used to start or stop the air purification function. Smart indicator(Air quality) always on setting (If it press for 3 s)

Used to set each vane angle.

Used to set airflow.

Used to turn on/off the unit.

Used to select the room temperature.

ENGLISH

Note

Always use/replace both batteries of same type.

If the system is not to be used for a long time, remove the batteries to save their working life.

If the display screen of remote controller

starts fading, replace both of the batteries.

Note

Remote controller should never be exposed to

direct sunlight.

Signal transmitter & receiver should always be

clean for proper communication. Use a soft cloth to clean them.

In case some other appliances also get

operated with remote control, change their position or consult your serviceman.

Operating method

The signal receiver is inside the unit.

Aim the remote controller towards the unit to operate it. There should not be any blockage in

between.

Accessory

Holder(1 EA) Fixing screw (2 EA)

Owner's /

Installation manual

h Components and printings may differ

depending on the product.

AAA(1.5 V)

Batteries(2 EA)

Used to select the operation mode.

Speed cooling(heating) operates super high fan speed.

Used to set fan speed.

Used to set or clear additional function. Celsius/Fahrenheit Switching (If it press for 5 s)

Used to stop or start louver movement and set the desired up/down airflow direction. Used to set the desired left/right(horizontal) airflow direction.

Used to set the time of sleeping operation.

Used to set the time of starting operation.

Used to set the time of stopping operation.

Used to set the timer. (If it is timer mode) Used to adjust the brightness. (If it is not timer mode) Used to check the room temperature. (If it is not timer mode)

Used to set/clear the timer. Used to set the current time (If it press for 3 s)

Used to reset the remote controller.

+ 7 hidden pages