LG PWKAUW01 Manual book [id]

MFL71753706
Rev.01_020921
www.lg.com
Owner’s Manual
Wearable
Read this owner’s manual thoroughly before operating the appliance and
keep it handy for reference at all times.
Copyright © 2020 - 2021 LG Electronics Inc. All rights reserved
PWKAUW01
ENGLISH
(Only for Malayisia)
DIIMPOT / DIEDAR OLEH:
LG ELECTRONICS (M)SDN BHD.
A-08-01 LEVEL 8 ,BLOCK A ,PJ8,
NO 23 ,JALAN BARAT SEKSYEN 8,
46050 PETALING JAYA,
SELANGOR DARUL EHSAN.
INFO LINE TEL : 1 800 822 822
(Customer Care Line)
(Only for Philippines)
Imported by:
LG Electronics Philippines Inc.
15 Francisco Legaspi St. Maybunga, Pasig City 1607 Philippines
TABLE OF CONTENTS
This manual may contain images or content different from the model you purchased.
This manual is subject to revision by the manufacturer.
SAFETY PRECAUTIONS
03 Using the Product
04 Storing the Product
UNPACKING
05 Components
05 Supplying Power
OPERATION
06 Appliance Overview
07 Power and Status Display
08 Inserting a Wearable Air Purifier or
Mobile Phone
09 Charging the Wearable Air Purifier
10 Beginning Operation and Changing
Mode
USING THE SMART
FUNCTIONS
12 Using the LG ThinQ Application
14 Guide to LG ThinQ App Functions
MAINTENANCE
15 Cleaning the Product
TROUBLESHOOTING
16 Before Calling for Service
APPENDIX
18 Product Specifications
18 Open Source Software Notice
Information
3
Please make sure to read the following safety precautions as they are de-
signed to prevent unexpected danger and damage.
These safety precautions are divided into two sections, Warning statements and
Caution statements.
WARNING:
Failure to follow the instructions laid down in this manual
may cause serious injury or death.
CAUTION:
Failure to follow the instructions laid down in this manual
may cause minor injury or product damage.
Using the Product
WARNING
Do not use or charge the product when it is wet. If the
product has been submerged, stop using the product and
contact an LG Electronics Customer Information Center.
Do not use or store firearms, combustibles or inflammables
near the product.
Do not place magnetic material near the product’s status
indicator light. Doing so may cause a UVC LED malfunction
which may result in personal injury.
Do not disassemble or damage the product or parts.
Do not use the product for purposes other than its intended
purpose. Do not use the product when it is damaged.
This device contains a UVC emitter which cannot be
replaced by consumers.
Using the device in an unintended way may cause harm-
ful UVC emitter to leak.
Do not come into contact with the UVC radiator or look
directly at the light (UV rays).
Exposure to UVC radiation, even in very small amounts,
can harm eyes and skin.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabili
-
ties, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning the use of
the appliance by a person responsible for their safety.
SAFETY PRECAUTIONS
4
Storing the Product
WARNING
Do not place the product near a car window exposed to
direct sunlight or on top of an electric pad or heater.
Do not place the product near a humid area such as a sauna,
a swimming pool or a bathroom.
Children should be supervised to ensure that they do not play
with the appliance.
Do not use in a vehicle or environment other than the given
service environment.
If any abnormal noises, smells or smoke appear from
the product, immediately stop using the product, and
call an LG Electronics Customer Information Center.
Do not allow the cable to be compacted by a heavy object,
bent forcibly, or damaged by a pet.
The appliance must only be supplied at safety extra low volt-
age corresponding to the marking on the appliance.
Before cleaning, turn the product off and unplug it.
Do not allow foreign substances such as water, coffee or cola
to enter the product.
Dispose of the packing materials safely so as to keep them out
of the reach of children.
CAUTION
Do not clean the product with a strong detergent such as
a solvent.
Avoid subjecting the product to severe impacts.
5
UNPACKING
Components
Wearable Air Purifier Case Power Cable
Supplying Power
The case requires an AC adapter (not included) to use.
Connect the device and power cable to an AC adapter before use.
NOTE
The appliance must only be supplied at safety extra low voltage corresponding
to the marking on the appliance from an AC adapter (5 V, 1.8 A or higher). The
AC adapter should be purchased separately. Use of an AC adapter lower than
1.8 A may cause the product to become inoperative or malfunction.
When connecting to a vehicle USB port or a PC USB port, the current may
be lower than the outlet current, which may cause product failure.
The adapter is sold separately
6
Appliance Overview
Front View
a
Top Cover
b
Status Display
c
Power button
Rear View
a
Charging port
Inside
a
Wearable air purifier
and
mobile phone storage
b
UVC LED
c
Charging socket
d
Charging terminal
OPERATION
7
Power and Status Display
a
Power button
b
UVnano indicator light
c
Filter drying indicator light
d
Wearable air purifier charge indicator light
e
Wi-Fi operation light
8
Inserting a Wearable Air Purier or Mobile Phone
1
To open the product, hold the LG Puricare logo and the top cover.
2
Insert the wearable air purifier or mobile phone in the case as shown.
Fold the wearable air purifier’s ear straps and hooks inward before inserting
it with the charging port on the left.
Insert a mobile phone with the screen facing up.
NOTE
Do not cover the left or right UVC LEDs of the product when inserting a
mobile phone. The Bacteria removal performance may be compromised.
1 2
Top Cover
Wearable air purier
Charging Port
UVC LED
9
Charging the Wearable Air Purier
The battery on the wearable air purifier can be charged while the wearable air
purifier is in the case.
1
Plug the charging socket into the charging port on the wearable air purier.
The charging socket is located inside the case.
2
Connect the charging socket to the charging terminal in the case, and
plug in the case.
When the charging socket is connected, the wearable air purifier charge indi-
cator light on the case shows the charging status of the wearable air purifier.
Color of Wearable Air Purifier
Charge Indicator Light
Charge Status
Green Charging completed
Red Charging in progress
NOTE
The wearable air purifier requires approximately 2 hours to charge.
The charging time of the wearable air purifier varies depending on the
usage environment.
If the filter drying mode is running while the wearable air purifier is
charging, it may take longer to charge.
1
2
Charging Socket
CAUTION
The recommended temperature range for charging the wearable air purifier in the
case is 5 °C to 32 °C. Charging the wearable air purifier at a temperature outside
the recommended temperature range may reduce wearable air purifier life or
increase the charging time, and charging could be suspended for safety reasons.
10
Beginning Operation and Changing Mode
Press the Power button to begin operation. Press the Power button repeatedly
to change the operating mode.
When the Power button is pressed, the product will turn on and operate in the
UVnano mode. Each time the Power button is pressed, the product operation
mode will change, from UVnano mode→Filter Drying mode→Product OFF.
To turn on the Wi-Fi product connection mode, press and hold the Power
button for at least 3 seconds.
The Wi-Fi connection status is indicated by the Wi-Fi operation indicator light.
Status of
Wi-Fi operation indicator light
Description
On Completion of Wi-Fi product registration
Flashing
Activation of Wi-Fi product registration mode
NOTE
Before opening the Top Cover, press the Power button to turn the case off.
If the top cover is opened, the product automatically stops operating and
disables the function.
The Filter Drying mode operates when the wearable air purifier is connect-
ed to the charging socket and inserted in the case.
If the Wi-Fi function does not connect after 7 minutes, the Wi-Fi operation
indicator light will turn off.
For detailed information regarding the Wi-Fi function, refer to the Using the
Smart Functions section.
UVnano Mode
The UVnano mode removes bacteria from the surfaces of the wearable air
purifier or mobile phone using ultraviolet rays (UVC).
It takes about 30 minutes to complete.
The UVnano mode operating status is indicated by the UVnano indicator light.
11
Color of UVnano Indicator Light UVnano mode operating status
Green Completed
Red In progress
NOTE
“UVnano” is a compound word derived from the words “UV” (ultraviolet
rays) and “nanometer” (unit of length).
For details about the bacteria removal performance, refer to the product
information for the wearable air purifier case on the www.lg.com website.
If the UVnano indicator light is flashing, contact an LG Electronics Custom-
er Information Center to set up service, as there may be a problem with
the bacteria removal performance.
Filter Drying Mode
The Filter Drying mode dries the filter and removes bacteria from the wearable
air purifier at the same time.
The Filter Drying mode dries the filter using the fan on the wearable air purifier.
It takes about 4 hours to dry the filter completely.
The bacteria removal status for the wearable air purifier is indicated by the UVna-
no indicator light.
The filter drying status is indicated by the filter drying indicator light.
Color of Filter Drying
Indicator Light
Description
Green Filter drying finished
Red Filter drying in progress
NOTE
The Filter Drying mode operates when the wearable air purifier and the case
are connected via the charging socket.
If the filter drying indicator light flashes, check the connection between the
wearable air purifier and charging socket, and between the charging socket
and the case.
12
Using the LG ThinQ Application
For easy access to detailed status information on the wearable air purifier and
wearable air purifier case, install the LG ThinQ application on a smartphone.
1
Turn off the data function of the smartphone.
On an Android phone, turn off the mobile data.
On an iOS phone, turn off the cellular data.
2
Connect the smartphone to Wi-Fi in the home.
Do not choose a Wi-Fi network with “5G” in its name. The model
installed in the appliance only supports 2.4 GHz.
3
Search for and install the LG ThinQ app.
On an Android phone, search for the LG ThinQ app in the Google Play
Store.
On an iOS phone, search for the LG ThinQ app in the Apple App Store.
4
Once the app is installed on the smartphone, open the LG ThinQ app.
5
Log into the LG ThinQ app.
Log in using an account that’s being used currently or create an LG
account to log in.
6
Press the add product button (+) and select the Wearable Air Purier Case.
Follow the guide of the LG ThinQ app to connect the product.
USING THE SMART FUNCTIONS
Loading...
+ 28 hidden pages