LG PW1500GB Owner’s Manual

Owner's Manual

LG MiniBeam

DLP Projector

Please read the safety information carefully before using this product.

PW1500GB

PW1500GN

www.lg.com

P/NO : SAC37034641 (1804-REV04)

Copyright 2017 LG Electronics Inc. All Rights Reserved.

2 LICENSES

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.

To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.

Covered by DivX Patents 7,295,673;

7,515,710; RE45,052; and others available

at [www.divx.com/patents]

The terms HDMI and HDMI High-

Definition Multimedia Interface, and the

HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

 NOTE

•Image shown may differ from your projector.

•Your projector’s OSD (On Screen Display) may differ slightly from that shown in this manual.

SAFETY PRECAUTIONS

3

SAFETY PRECAUTIONS

Please take note of the safety instructions to prevent any potential accident or misuse of the projector.

•Safety precautions are given in two forms, i.e., WARNING and CAUTION as detailed below.

WARNING Failure to follow the instructions may cause serious injury and even death.

CAUTION Failure to follow the instructions may cause personal injury or product damage.

•Read the owner's manual carefully and keep it on hand.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

-- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

Read these instructions. Keep these instructions. Heed all warnings.

Follow all instructions.

Indoor Installation

WARNING

•Do not use the projector outside and do not expose the product to any humidity or water. --Since the product is not

waterproof, this may result in a fire or electric shock.

•Do not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc.

--This may result in fire.

•Do not place flammable materials such as aerosols near the projector.

--This may result in fire.

4 SAFETY PRECAUTIONS

•Do not allow children to cling to or climb up to the projector. --This may cause the projector

to fall, causing injury or death.

•Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion.

--This may result in fire due to the increase in internal temperature.

•Do not place the product close to sources of steam, oil or oil mist, such as humidifiers and kitchen counters.

--Failure to do so may result in fire, electric shock, or corrosion.

•Do not install the product onto a wall or ceiling that is close to sources of oil or oil mist.

--The product may be damaged and fall, resulting in serious injury.

•Do not place the projector where it might be exposed to dust.

--This may result in fire.

•Do not use the projector in a damp place such as a bathroom where it is likely to get wet.

--This may result in fire or electric shock.

•Do not allow a tablecloth or curtain to block the air vent.

--This may result in fire due to the increase in the internal temperature.

•Ensure good ventilation around the projector. The distance between the projector and the wall should be at least 30 cm.

--This will prevent fire due to the increase in the internal temperature.

CAUTION

•When placing the projector on a table or shelf, be careful not to put it near the edge.

--The projector could fall due to balance problems, which may cause personal injury or damage to the product. Make sure to use the projector cabinet or stand that fits the projector.

•When moving the projector, make sure to switch it off and remove the power plug and cords.

--The power cord may be damaged, resulting in fire or electric shock.

•Do not place the projector on an unstable or vibrating surface such as a wobbly shelf or a slope.

--It may fall and cause injury.

•Be careful not to tip the projector over when connecting external devices to the projector.

--This may cause personal injury or damage to the projector.

SAFETY PRECAUTIONS

5

Power

WARNING

•DISCONNECTING THE DEVICE FROM THE MAIN POWER

--The Power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

•The grounding wire should be connected. (Except for devices which are not grounded.)

--Ensure that you connect the grounding cable to avoid electric shock.

If it is not possible to ground the unit, have a qualified electrician install a separate circuit breaker.

Do not try to ground the projector by connecting it to telephone wires, lightning rods, or gas pipes.

•The power plug should be inserted fully into the power outlet.

--An unstable connection may cause a fire.

•Do not place heavy objects on the power cord.

--This may result in fire or electric shock.

•Never touch the power plug with wet hands.

--This may result in electric shock.

•Do not plug too many devices into one multi-power outlet.

--This may result in fire due to the power outlet overheating.

•Keep the AC adapter, power plug, and the used power outlet clean from dust or foreign materials building up.

––This may result in fire.

•If there is any smoke or a burning smell from the projector or AC adapter, stop using the product immediately. Disconnect the power cord from the power outlet, and then contact the customer service center.

––This may result in fire.

•To turn off the main power, remove the power plug, which should be positioned so it is easy to access for operation.

	6		SAFETY PRECAUTIONS
					• Do not turn the projector on or
		CAUTION
	•	Always grab the plug to remove				off by plugging in the power plug
						or unplugging it from the power
		the AC adapter or power cord.
						outlet. (Do not use the power
		–– Otherwise, this may result
						plug as a switch.)
		in a fire or may damage the
						--This may result in electric
		product.
						shock or damage to the
	•	Refrain from constantly bending
						product.
		the power cord of the AC			•	Do not insert a conductor
		adapter.
						into the other side of the wall
		–– If the power cord is bent
						outlet while the power plug is
		excessively for a long period
						inserted into the wall outlet.
		of time, the cord may break
						In addition, do not touch the
		inside. This may result in a
						power plug immediately after it
		fire or electric shock.
						is disconnected from the wall
	•	Ensure the power cord and plug
						outlet.
		are not damaged, modified,				--This may result in electric
		severely bent, twisted, pulled,				shock.
		sandwiched or hot. Do not use			•	Only use the official power cord
		the product if the power outlet
						provided by LG Electronics. Do
		is loose.
						not use other power cords.
		–– This may result in fire or
						--This may result in fire or
		electric shock.
						electric shock.
	•	Keep the power cord away from
					•	If any water or foreign materials
		heating devices.
						have gone into the AC adapter,
		--The wire's sheath may melt,
						power cord, or the interior of the
		which may result in fire or
						projector, turn off the projector
		electric shock.
						by pressing the power button.
	•	Place the projector where
						Remove all the cables, and then
		people will not trip over or step				contact the customer service
		on the power cord to protect the				center.
		power cord and plug from any				–– This may result in fire or
		damage.				electric shock.
		--This may result in fire or

electric shock.

			SAFETY PRECAUTIONS			7
•	The surface of the AC adapter is	When in Use
	hot. Keep the AC adapter out of
	the reach of children and avoid		WARNING
•	touching it during use.	•	Do not place anything
	Never disassemble the power
			containing liquid on top of the
	supply devices (AC adapter/
			projector such as a vase, flower
	power cord, etc.).
			pot, cup, cosmetics, medicine,
	–– This may damage the power
			or ornaments, candles, etc.
	cord and result in a fire or
			--This may result in fire or
	electric shock.
			electric shock, or cause injury
• Connect the AC adapter and the
			due to falling.
	power cord firmly.	•	In the event that there is a
	–– Not doing so may result in a
			heavy impact or the cabinet is
	product failure or fire.
			damaged, switch it off, unplug
• Do not place heavy objects
			it from the power outlet and
	or put pressure on the power		contact an authorized service
	cord and AC adapter and avoid		center.
	damage.		--This may result in electric
	–– This may result in a fire or		shock.
	may damage the product.	•	Do not insert pieces of metal
•	Always use the AC adapter
			such as coins, hairpins, or metal
	provided or any AC adapters		debris, nor flammable materials
	approved and certified by LG		such as paper or matches into
	Electronics.		the projector.
	–– Any other AC adapter		--This is to prevent electric
	connected may result in the		shock or fire.
	screen flickering.	•	Make sure that a child does

not swallow the batteries when you replace the old remote control batteries with new ones.

Keep batteries out of reach of children.

--If a child swallows a battery, consult a doctor immediately.

8 SAFETY PRECAUTIONS

•Never open any cover on the projector.

--There is a high risk of electric shock.

•Do not look directly into the lens when the projector is in use. --The bright light may damage

your eyes.

•When the lamp is on or has just been turned off, avoid touching the air vent or lamp, because these will be very hot.

•If there is a gas leak in the room with the projector, do not touch the projector or power outlet. Open the windows for ventilation.

--Sparks may cause fire or burns.

•Unplug the power cord from the outlet during a lightning storm. --This will prevent shock or

damage to the projector.

•Do not use the projector near electronic devices that generate a strong magnetic field.

•Keep the plastic film used for packaging the projector out of the reach of children.

––If not handled safely, it can cause suffocation.

•Do not keep your hand on the projector for a long time when it is running.

•When you play a game by connecting a game console to a projector, it is recommended that you maintain a distance of more than four times the diagonal length of the screen. --Make sure that the

connecting cable is long enough. Otherwise, the product may fall causing personal injury or damage to the product.

•Do not place the projector or its remote control with battery in an extremely high temperature environment.

--This may result in fire.

•Do not use 3D glasses if you do not watch 3D.

SAFETY PRECAUTIONS

9

CAUTION

•Do not place heavy objects on the projector.

--It may fall down and cause personal injury.

•Be careful not to allow any impact to the lens during transport.

•Do not touch the lens of the projector.

--The lens may be damaged.

•Do not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing.

•In the event that no image appears on the screen or no sound is heard, stop using the projector. Switch off the projector, unplug it from the power outlet and contact our service center.

--This may result in fire or electric shock.

•Do not drop anything onto the projector or allow anything to bang into the projector.

--This may cause damage to the projector or personal injury.

•It is recommended that you maintain a distance of more than 5 to 7 times the diagonal length of the screen.

––If you watch the screen at a close distance for a long time, your eye sight may become worse.

•Do not block the light beam emitted from the projector using a book or other object. --Lengthy exposure to the

projector beam may result in fire. In addition, the lens may be overheated and damaged by the reflected heat. Disable the AV function to stop projection temporarily or turn off the power.

•Do not start the projector with the volume turned up high. --High volume may damage

hearing.

•Do not use high voltage electrical equipment near the projector, (e.g., a bug zapper). This may result in product malfunction.

•Do not insert your finger into the air vent (inflow/outflow vents). --This may cause injury or a

product malfunction.

10 SAFETY PRECAUTIONS

Cleaning

WARNING

•Do not spray the projector with water when cleaning. Make sure water does not flow into the projector.

--This may result in fire or electric shock.

•When there is smoke or a strange smell coming out from the projector or a foreign object falls into the projector, please switch it off and unplug it from the power outlet and contact our service center.

--Otherwise, this may result in fire or electric shock.

•Use air spray, a soft cloth, or a cotton swab moistened with a lens cleaning chemical or

alcohol to remove dust or stains on the front projection lens.

CAUTION

•Contact your seller or our service center once a year to clean the internal parts of the projector.

--If you do not clean the projector for a long period of time, dust will accumulate, which may result in fire or damage to the projector.

•When cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, automobile or industrial polish, abrasives, wax, benzene, or alcohol as these can damage the projector.

--This can result in fire, electric shock or cause damage to the product (deformation and corrosion).

•Do not wipe the optical system (lens, mirror) right after the product has been turned off or while the product is being operated. When cleaning each part of the product, remove the power cord and wipe gently with a soft cloth. Do not spray with water or wipe with a wet cloth. Do not use detergents, automobile or industrial polish, abrasive substances, wax,

benzene, alcohol, water, etc. on the product’s main unit or optical system (lens, mirror) as this may damage the product.

--This can result in fire, electric shock or cause damage to the product (deformation and corrosion).

•Remove the plug from the outlet before cleaning the product. --Otherwise, this may result in

electric shock.

SAFETY PRECAUTIONS 11

Others

WARNING

•Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular patterns from a video game.

•When you go out, place the projector out of reach of animals, and remove the power plug from the wall outlet. --Using a damaged power cord

may result in short circuit or fire.

•Do not use the projector near high-precision electronic devices or those that transmit weak radio signal.

--This may affect the operation of the product, causing an accident.

•Only a qualified technician can disassemble or modify the projector. For diagnosis, adjustment, or repair, contact

your seller or our service center.

--This may result in fire or electric shock.

•Proper ventilation required, do not block airflow around unit.

Doing so can cause injury and internal overheating.

•Do not touch the lens; doing so can result in burns or damage to lens. Lens and unit may be HOT during and immediately after use. Use caution when handling unit, allowing for proper cool down.

•Only use a grounded electrical outlet. (Except for devices which are not grounded.)

•Do not insert anything into or cover up the exhaust vents.

--This may result in fire or electric shock.

•Follow all maintenance guidelines for optimal use; service only at an authorized service center.

•Keep the batteries and remote out of reach of children.

––This will prevent personal injury or damage to the product.

	12 SAFETY PRECAUTIONS
					• Store batteries away from
		CAUTION
	•	Do not use or store the projector				metallic objects, such as keys
						and paper clips.
		outdoors for long periods of
						--Excess current may cause a
		time.
						rapid increase in temperature,
	• Do not mix new batteries with
						resulting in fire or burns.
		old ones.			•	Do not store the batteries near
		--Burst or leaking batteries may
						any heat source, such as a
		result in damage or injury.
						heater.
	• Be sure to unplug if the projector
						--This may result in fire or
		is not to be used for a long				damage to the product.
		period.			•	Do not store batteries at
		--Accumulated dust may result
						temperatures higher than 60 °C
		in fire or electric shock due to
						or in high humidity.
		overheating, ignition, or poor
						--This may result in explosion
		insulation.
						or fire.
	•	Only use the specified type of
					•	Make sure that the battery is
		battery.
						installed correctly.
		--Burst or leaking batteries may
						--This may prevent explosion
		result in damage or injury.
						or fire.
	•	Make sure you use the same
					•	Incorrect battery replacement
		type of battery when replacing.
						may cause fire.
		(Battery type: CR2032 / 3 V)
					• Batteries: Store the accessories
		–– In the case of a battery
						(battery, etc.) in a safe location
		contact failure, the battery
		may drain quickly or the
		remote control may not work
	•	properly.				Risk Group 2
		Dispose of used batteries
		properly.				CAUTION Possibly hazardous
		--This may result in explosion				optical radiation emitted from this
						product. Do not stare at operating

	or fire. The correct method	lamp. May be harmful to the eye.
	disposal may vary depending
	on your country or region.

•Do not throw or disassemble the battery.

--This may result in fire or explosion due to damage to the battery.

This label is attached to the bottom of the product and language may differ.

				CONTENTS		13
	CONTENTS
	LICENSES	2	Additional Options			31
	SAFETY PRECAUTIONS	3		--Adjusting Aspect Ratio		31
				--Using the Keystone Function
	PREPARATION	15				32
				--Changing Input Device		33
	Accessories	15		--Blank Function		35
	Optional Extras	16	Using the Quick Menu			36
	Parts and Components	17	MY MEDIA			37
	Using the Joystick Button	19
			Before Using			37
	--Basic Functions	19
				--Connecting a USB Device 37
	--Adjusting the Menu	20
				--Removing a USB Device		37
	Projector Status Indicators	20
			To Use My Media			39
	Installation	21
				--Watching the Videos		43
	--Installation Precautions	21
				--Viewing the Photos		49
	--Projection Distance per
				--Listening to Music		53
	Screen Size	22
				--Viewing Files		57
	--How to Install the Projector
			3D FUNCTION			61
	On a Tripod	24
	--Kensington Security System
			While Watching 3D			61
		25
			Requirements for Watching 3D
	REMOTE CONTROL	26
			Images			65
	USING THE PROJECTOR 29			--Using the DLP-LINK (DLP-
				Ready) Type Glasses		66
	Watching Projector	29	To view 3D images			66
	--Turning on the Projector	29		--Supported 3D Mode		67

--Focus of the Screen Image

30

--Watching With the Projector

30

14 CONTENTS

CUSTOMIZING SETTINGS			MAINTENANCE	91
69			Cleaning	91
SETTINGS	69		--Cleaning the Lens	91
PICTURE Settings	70		--Cleaning the Projector Case
AUDIO Settings	77			91
TIME Settings	79		SPECIFICATIONS	92
INFORMATION	80		SYMBOLS	96
OPTION 1 Settings	81
OPTION 2 Settings	82
CONNECTING DEVICES 84
Connecting to HD Receiver,
DVD, VCR Player, or External
Devices	85
--HDMI Connection	85
--HDMI to DVI Connection	85
--Component Connection	86
Connecting a PC	86
--HDMI Connection	86
--HDMI to DVI Connection	87
--RGB Connection	87
Connecting a Laptop	88
--HDMI Connection	88
Connecting to Headphones	89
Using the Mirroring Function
of a Mobile Phone	90

--MHL/Slimport Connection 90

PREPARATION 15

PREPARATION

The pictures may differ slightly from the actual product.

Accessories

Accessories included with the projector are show below.

Accessories are subject to change without prior notice.

New accessories may be added or old ones removed.

Remote Control,
Lithium Battery	Owner's Manual	AC-DC Adaptor

(CR2032 / 3 V)

Power cord

•When connecting an HDMI or USB cable, or connecting a USB flash drive

to the HDMI or USB port, use a product that has a width of 18 mm or less and a height of 10 mm or less. If the USB cable or USB flash drive does not fit the USB ports of the projector, use an extension cable that supports USB 2.0.

•Use a certified cable with the HDMI logo attached.

•If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI cable types) --High-Speed HDMI®/™ Cable

--High-Speed HDMI®/™ Cable with Ethernet

16 PREPARATION

Optional Extras

To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice.

Projection Screen

Tripod

HDMI Cable

	RGB to Component										3D glasses
				Component Cable							(DLP-LINK or DLP
		cable
											Ready Type)

MHL or Slimport cable

Computer Cable

PREPARATION 17

Parts and Components

This projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue, or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction.

Joystick button

Speaker

Vent1)

	Speaker
Lens2)	Vent1)
	Focus ring

1)Due to the high temperature of vent area, do not get close to the vent area.

2)Do not touch the lens when using the projector. The lens may be damaged.

18 PREPARATION

1

2

3

4

5

1

2

3

4

5

(USB Port)

Port

RGB IN Port

(Headphone Port)

DC IN Port

PREPARATION 19

Using the Joystick Button

You can operate the projector by pressing the button or moving the joystick left, right, up, or down.

Basic Functions

Power On When the projector is turned off, place your finger on the joystick button, press it once, and release it.

Power Off When the projector is turned on, place your finger on the joystick button, press it once for a few seconds, and release it. (However, if the menu button is on the screen, pressing and holding the joystick button will let you exit the menu.)

Volume Place your finger over the joystick

Control button and move it left or right. You can adjust the volume level.

Up/Down/ If you move the joystick up, down, left, Left/Right or right, you can move the cursor to select the menu items.

NOTE

•Move the joystick button up, down, left, or right. Be careful not to press the joystick button. If you press the button while moving the joystick, the volume control may not work, and the cursor may not move.

20 PREPARATION

Adjusting the Menu

When the projector is turned on, press the joystick button one time.

You can adjust the menu items (, , , ) moving the joystick button left, right, up, or down. Move to the desired menu item, and then press the joystick button once to select it.

Projector off Turns the power off.
Input List	Changes the input source.
Close	Clears on-screen displays and
Close	returns to projector viewing.
Settings	Displays the Settings menu.

Projector Status Indicators

LED Power Indicator

LED Power Indicator

Red Power standby state

Off The projector is operating with the power on.

PREPARATION 21

Installation

Installation Precautions

•Place the projector in a wellventilated environment. --To prevent internal

overheating, install the projector in a well-ventilated place. Do not place anything near the projector that may block its air vents. If the

air vents are blocked, the internal temperature of the projector will increase.

--Do not place the projector on a carpet or rug. If the projector's inlet vent is on the bottom, be careful not to block the vent and always use the projector on a solid, level surface.

--Be sure to prevent foreign objects such as paper debris from entering the projector.

--Leave an adequate open area (30 cm or more) around the projector.

•Do not place the projector in a hot, cool, or humid environment.

•Do not place the projector in a place where it will easily attract dust.

--This may result in fire.

•Never open any cover on the projector. There is a high risk of electric shock.

•The projector is manufactured using high-precision technology. You may, however, see

tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction.

•The remote control may not work in an environment where a lamp equipped with electronic ballasts or a three-wavelength fluorescent lamp is installed. Replace the lamp with an international standard lamp

for the remote control to work normally.

•To install to the ceiling, attach the ceiling-type bracket to the projector with M4 x 8 mm screws.

22 PREPARATION

Projection Distance per Screen Size

1 Place the projector on a sturdy, level surface, together with the PC or audio/video source.

2 Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image.

3 Position the projector so that the lens is at a right angle to the screen. If the projector is not at a right angle, the projected image will look distorted. To correct the distortion, use the keystone function.

(See page 32.)

4 Connect the power cord of the projector and the connected device to the wall outlet.

Ratio of upward projection: 100 %

<![if ! IE]>

<![endif]>(X) Height Screen

<![if ! IE]> <![endif]>X/2	Screen
<![if ! IE]> <![endif]>X/2

Projection Distance (D)

<![if ! IE]>

<![endif]>(Y) Width Screen

Screen

<![if ! IE]>

<![endif]>Y/2

<![if ! IE]>

<![endif]>Y/2

Projection Distance (D)

			PREPARATION 23
	16:10 Ratio
Screen Size	Screen Width	Screen Height		Projection
				Distance (D)
(mm)	(Y) (mm)	(X) (mm)		(mm)
635	539	337		748
762	646	404		902
889	754	471		1056
1016	862	538		1210
1143	969	606		1366
1270	1077	673		1520
1397	1185	741		1674
1524	1292	808		1828
1651	1400	875		1983
1778	1508	943		2137
1905	1615	1010		2291
2032	1723	1077		2445
2159	1831	1145		2601
2286	1938	1212		2755
2413	2046	1279		2909
2540	2154	1347		3063

24 PREPARATION

How to Install the Projector On a Tripod

•You can install the projector using a camera tripod.

•As shown below, you can mount the projector instead of a camera on the tripod.

•When stabilizing the tripod, we recommend using a locking bolt of standard size 4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer than the maximum allowed size, it may damage the projector.)

	Bottom side of the	Bolt used to
	projector
		attach the
		projector
	+
	The projector is
	connected to this part.	Tripod



CAUTION

•If you are using a tripod, be careful not to apply external force to the tripod. Doing so may damage the projector.

•Do not place the tripod on an unstable surface.

•Be sure to use a tripod with a maximum load capacity of 3 kg or more.

•To use the projector safely, position the tripod legs so that they are as wide and stable as possible and be sure to securely attach the projector to the tripod.

PREPARATION 25

Kensington Security System

•This projector has a Kensington Security Standard connector as an anti-theft mechanism. Connect a Kensington Security System cable as shown below.

•For more information on installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.

•The Kensington Security System is an optional accessory.

•What is Kensington?

Kensington is a company that provides safety systems for laptops and other electronic devices. Website: http://www.kensington.com

26 REMOTE CONTROL

REMOTE CONTROL

Open the battery cover on the back of the remote
control and insert the batteries which are specified
in the battery room with poles pointing in the
correct direction. Use new batteries.

219'4

/76'

81.7/'

#761

1-

':+6

+0276

2#)'

$.#0-

POWER

Turns the projector on or off.

MUTE

Mutes the sound of the projector.

INPUT

Changes the input source.

VOLUME +, -

Adjusts the volume level.

PAGE

Moves to the previous/next page.

5'66+0)5		3 /'07
56+..	4#6+1	75$
*'.2	-';5	-';5
	&	. 4

AUTO

Automatically adjusts the RGB-PC input image.

Up/Down/Left/Right buttons

Sets the function or moves the cursor.

OK

Shows the current mode and saves changes to the settings.

BLANK

Displays a blank screen.

EXIT

Exits the menu.

Returns to the previous screen.

SETTINGS

Displays or closes the Settings menu.

Q.MENU

Enters the quick menu.

REMOTE CONTROL 27

219'4

81.7/'

#761

':+6

5'66+0)5

56+..

*'.2

+0276

/76'

2#)'	STILL
	Freezes the moving image.
	(Available in any mode other than USB
	mode.)
$.#0-	RATIO
1-	Changes the aspect ratio of the screen
	per pressing of the button.

USB

			Accesses USB mode.
		3 /'07	HELP
	4#6+1	75$	Enables the self-diagnosis.
			KEY.S ▲, ▼
	-';5	-';5	Adjusts the Keystone function.
			Playback control buttons
	&	. 4	Controls playback of MY MEDIA.
			Color buttons
			Sets detailed settings or gesture for each
			menu.
			3D
			Shows 3D images.
			L/R
			Switches left and right in 3D mode.

28 REMOTE CONTROL

NOTE

•When using the remote control, the optimal operation range is 6 meters or less (left/right) and within a 30 degree arc of the remote control IR receiver.

•If a cable is connected to the back port, the optimal operating range is 3 meters or less (left/right) and within a 30 degree arc of the remote control IR receiver.

30° 30°

•For seamless operation, do not block the IR receiver.

•When you carry the remote control in the portable bag, make sure that the buttons on the remote control are not pressed by the projector, cables, documents, or any other accessories in the bag. Otherwise, it may significantly reduce the battery life.

USING THE PROJECTOR 29

USING THE PROJECTOR

Watching Projector

Turning on the Projector

The menu screen display in this owner's manual is an example to help users understand how to operate the product and may look different from the actual screen.

1 Connect the power cord correctly.

2 After waiting for a moment, press the POWER button on the remote control or the joystick button.

3 In the Language Selection screen, select a language.

WELCOME!

Thank you for choosing LG

Language

Confirm

4 In the Mode Setting screen, select the setting mode you want.

Mode Setting

Selecting the environment.

Choose the setting mode you want.

Select [Standard] to use this Projector at home. To use this

Projector at store, select [Store Demo].

Standard		Store Demo
Demo Mode		Off

Previous Confirm

* Store Demo is used when displaying the product in-store. The picture mode is automatically reset after a certain period of time. You can select Standard to use the product at home.

5 Select an input signal by using the INPUT button on the remote control.

30 USING THE PROJECTOR

Focus of the Screen Image

When an image appears on the screen, check if it is in focus and fits the screen properly.

Adjust the focus of the image by rotating the Focus Ring to the left or right. Make sure the product does not move when adjusting the focus.

Focus Ring

Watching With the Projector

1 When in standby mode, press the POWER button to turn the projector on.

2 Press the INPUT button and select the input signal you want.

3 Control the projector using the following buttons while watching projector.

Button	Description
VOLUME +, -	Adjusts the volume level.
MUTE	Mutes all sounds.
Q.MENU	Accesses the quick menu.
RATIO	Resizes an image.
KEY.S ▲, ▼	Adjusts Keystone.

4 To turn the projector off, press the POWER button.