Lg PQ Series, PS Series User Manual [th]

PLASMA TV

¤Ù‹Á×Í¡ÒÃ㪌§Ò¹

PQ Series

PS Series

ÃØ‹¹ : .............................................................................

ЛБТВаЕ¢»ГР¨Уа¤ГЧиН§ : ........................................

ГТВЕРаНХВ´¡ТГгªŒ§Т¹а¾ФиБ ЛТд´Œ¨Т¡ CD-ROM

¤Ù‹Á×Í¡ÒÃ㪌§Ò¹ (á¶Á¾ÃŒÍÁ仡Ѻà¤Ã×èͧ) â´Â¨Ò¡à» ´ä´Œ¨Ò¡à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍà PC áÅзҧàÇçºä«µ http://th.lgservice.com

2

Owner’s Manual							Power Cord
		Batteries

RATIO	POWER
		ENERGYSAVING
SLEEP			POWER
Q. MENU	MENU	RATIO	INPUT
		AV MODE	ENERGY SAVING

		1	2	3
	OK	4	5	6
		7	8	9
RETURN	AV MODE	LIST	0	Q.VIEW

This item is not included for all models.

MARK			MUTE
MUTE			P
FAV	E	or	P GA
	P
	A		E
	G

1

2

3

OK

* Lightly wipe any stains or fingerprints on

the surface of the TV with the polishing

4	5	6
7	8	9	MENU	RETURN
LIST	0	Q.VIEW		FAV
			Q.MENU FREEZE	MARK
		FREEZE

cloth.

Polishing Cloth 

Polishing cloth for use on

Do not use excessive force. This may cause

( ) scratching or discolouration. the screen.

Remote Control

x 2	or	x 4
Cable Holder	Protection cover	Bolts for stand assembly
(Refer to P. 9)	(Refer to p.10)	(Refer to P.7)

Cable Management Clip

(only 42/50PQ7***, 50/60PS8***)

(Refer to P. 9)

Ferrite Core
(This item is not included for
all models.)

Wall Mounting Bracket

Wall Mounting Bracket ( )

(Separate purchase) (Only 60PS8***)

AW-50PG60MS

AW-60PG60MS

3



CAUTION

G When the TV cannot be turned on with the remote control, press the main power button on the TV.

(When the power is turned off with the main power button on the TV, it will not be turned on with the remote control.)

42/50PQ142/50PQ1*** ***

แต่งภาพให้มีความเหมาะสมกับการรับIntelligent Sensor

Adjusts picture according to the

surrounding conditions

Remote Control Sensor

Power/Standby Indicator

•Illuminates- red in standby(standby)mode. •Illuminates- blue when the TV is switched on.

INPUT

MENU

OK

P

INPUT		MENU	OK	VOLUME	PROGRAMME	POWER
42/50PQ3	***
42/50PQ3***
						Intelligent Sensor
						Adjusts picture accord-
						ing to the surrounding
						conditions.
						Remote Control
						Sensor
					Power/Standby Indicator

•-Illuminates red in standby(standby)mo e.

•-Illuminates blue when the TV is switched on.

INPUT

MENU

OK

P

INPUT

MENU

OK

VOLUME

PROGRAMME

POWER

4

42/50PQ642/50PQ6*** ***

Intelligent Sensor

Adjusts picture according to

the surrounding conditions.

Remote Control Sensor

Power/Standby Indicator

•Illuminates- red in standby (standby)mode.

•The- LED is off while the TV remains on.

42/50PQ7***

P PROGRAMME

P

VOLUME

OK

OK MENU

MENU INPUT

INPUT POWER

Intelligent Sensor

Adjusts picture

according to the sur-

rounding conditions.

Remote Control

Sensor

Power/Standby Indicator

•Illuminates- red in standby mode(standby).

•The- LED is off while the TV remains on.

50/60PS8***

กับการรับชมในสภาพIntelligent SensorAdjusts picture

according to the sur-

rounding conditions.

Remote Control Sensor

Power/Standby Indicator

•Illuminates- red in standby(standby)mode.

•The- LED is off while the TV remains on.

5



A Here shown may differ from your TV.

1
2	3	4
		Y
	AUDIO IN
	(RGB/DVI)
HDMI	AV	PB	VIDEO

HDMI/DVI IN	HDMI IN	VIDEO				PR
1	2
RS-232C IN	RGB(PC)	- AUDIO - (Mono)	IN1	OUT	VARIABLE AUDIO OUT	1 R L	2 AUDIO
(CONTROL&SERVICE)

Only 42/50PQ142/50PQ3***, 42/50PQ342/50PQ1******

	USB IN	HDMI IN3
USB IN
L/MONO AUDIO R	L/MONO AUDIO R
VIDEO	VIDEO
AV IN 2	AV IN 2

COMPONENT IN

ANTENNA

IN

USB Input

Used for Music, Photo and

USB

Movie (Except 42/50PQ1***,

42/50PQ1***, 2/50PQ3***

42/50PQ3***).

2

7

5

6

7

8

9

1Power Cord Socket

This TV operates on an AC power. The voltage is

indicated on the Specifications page. Never

attempt to operate the TV on DC power.

2 HDMI Input

Connect an HDMI signal to HDMI IN. HDMI

Or DVI(VIDEO)signal to HDMI/DVI port with DVI

( HDMI )

to HDMI cable.

3 RGB/DVI Audio Input

Connect the audio from a PC.

RGB[PC]/DVI

4 Component Input

6 RGB Input

Connect the output from a PC.

RGB

7 Audio/Video Input (AV IN1/2)

Connect audio/video output from an external

deviceto these jacks.

8 AV Output

Connect second TV or monitor to the AV OUT

socketon the TV.

Variable Audio Output

Connect an external amplifier or add a subwoofer

toyour surround sound system.

Connect a component video/audio device to

thesejacks.

5 RS-232C Input (CONTROL&SERVICE) Port

Connect to the RS-232C port on a PC.

RS-232C ( )

This port is used for Service or Hotel mode.

9 Antenna Input

Connect RF antenna to this jack.

( , , )

6

Image shown may differ from your TV

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the

 product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can

deviate from abrasion of the tightening part of the bolt.

1	Carefully place the TV screen side down on a cush-
	ioned surface to protect the screen from damage.

2 Assemble the TV as shown.

3	Fix the 4 bolts securely using the holes in
	4

the back of the TV.

! NOTE

G When assembling the stand, make sure to distinguish and assemble the

 front and rear side of the stand correctly.

FRONT

7

 เครื่องทั้งด้านหน้า

1

2

1

2

1	Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If(your TV has bolts in2 the eyebolts,)loosen then bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

3

3 ( )

Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes hori-zontal between the wall and the product.

! NOTE

GWhen moving the TV undo the cords first. GUse a platform or cabinet strong and large enough to support the size and weight of the TV.

GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

8

After Connecting the cables as necessary,

install CABLE HOLDER as shown and bun-
dle the cables.

42/50PQ7( ***, 50/642/50PQ7***,S8*** 50/60PS8***)only

CABLE HOLDER

	After Connecting the cables as necessary, install
	Install the“CABLEBLEMANAGEMENTANAG MENTCLIP”CLIP as shown.
1		2
	CABLE HOLDER as shown and bundle the cables.

To“ ”connect additional equipment, see the

External equipment Setup section.

CABLE HOLDER	CABLE MANAGEMENT CLIP
“CABEL MANAGEMENT CLIP”
How to remove the cable management clip (42/50PQ7***, 50/60PS8*** only )
( 42/50PQ7***, 50/60PS8***)

Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.

*

!NOTE

G Do not use the CABLE MANAGEMENT CABLELIP toMANAGEMENTlift the TV. CLIP

- If the TV is dropped, you may be injured or the TV may be damaged.

9

SWIVELI STANDSTAND ( )

This feature is not available for all models.

After installing the TV, you can adjust the TV set man-

20 ually to the left or right direction by 20 degrees to

suit your viewing position.

NOT USING THE DESK-TYPE STAND

Here shown may differ from your TV.

When installing the wall-mounted unit, use the protection cover. Insert the PROTECTION COVER into the TV

until clicking sound.

Protection cover

EARTHING
Ensure that you connect the earth wire to prevent possible
electric shock. If grounding methods are not possible, have a

qualified electrician install a separate circuit breaker.

Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.

Power Supply

Circuit breaker

10

4

4 inches

4 inches

4 inches

4 inches

WALL MOUNT: HORIZONTAL INSTALLATION

A	We recommend the use of a LG Brand wall mounting
	bracket when mounting the TV to a wall.
		A
	We recommend that you purchase a wall mountingVESA
A
		B
 bracket which supports VESA standard.
A	LG recommends that wall mounting be performed
	by a qualified professional installer.

! NOTE

G Should Install wall mount on a solid wall perpendicular to the floor.

G Should use a special wall mount, if you want to

Model

VESA

Standard

Quantity

install it to ceiling or slanted wall.

(A * B)

Screw

G The surface that wall mount is to be mounted on

42PQ1***

400

* 400

M6

4

should be of sufficient strength to support the



50PQ1***

400

*

400

M6

4

weight of TV set; e.g. concrete, natural rock, brick



M6

4

and hollow block.

42PQ3***

400

*

400

G Installing screw type and length depends on the wall

50PQ3***

400

* 400

M6

4



mount used. Further information, refer to the

42PQ6***

400

400

M6

4

*

instructions included with the mount.

M6

 VESA

50PQ6***

400

* 400

4

G LG is not liable for any accidents or damage to



42PS6***

400

400

M6

4

property or TV due to incorrect installation:

*



M6

- Where a non-compliant VESA wall mount is used.

50PS6***

400

* 400

4

- Incorrect fastening of screws to surface which may

M6

42PQ7***

400

* 400

4

cause TV to fall and cause personal injury.

M6

- Not following the recommended Installation

50PQ7***

400

* 400

4

M6

method.

50PS8***

400

* 400

4

M8

60PS8***

600 * 400

4

4 inches

4 inches

4 inches

4 inches

4 inches

11

Wall	/ /
	Multi-family Dwellings/Apartments
	( )(Connect to wall antenna socket) ANTENNA
Antenna	IN
Socket

Outdoor

Antenna

(VHF,UHF)UHF)

Antenna

RF Coaxial Wire ((75 ohm))

/ /Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

UHF

ANTENNA

Signal

IN

Amplifier

VHF

In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the

antenna as shown above.

2

If signal needs to be split for two TVs,use an antenna signal splitter for connection.

Ferrite Core

Use( )of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic

Ferrite core wave when connecting the power cord.

The closer the location of the ferrite core to the power plug, the better it is.

Install theferritepowercoreplug closely.

12

(H

 , STB (Set-top Box) , HD content playback

 (component)

1Connect the video outputs(Y,Pb,Pr)(Y, PB, PR) of the digital settop boxCOMPONENTto the OMPIN VIDEONENT IN VIDEO jacks on Y the TV.

PB

2	(Audio L,R)
	Connect the audio output of the digital set-top box to	PR
	COMPONENT IN AUDIO
	the COMPONENT IN AUDIO jacks on the TV.

COMPONENT IN

VIDEO

Turn on the digital set-top box.			R L	AUDIO	ANTENNA
3		1	2
( digital set-top
Refer to the owner’s manual for the	)

box.)

2

1

4SelectComponentomponent11 input sourceINPUT using the INPUT button on the remoteCOMPONENTcontrolIN. 2 Component 2

If connected to COMPONENT IN2, select Component2 input source.

L R Y PB PR

	Signal	Component	HDMI
			X
	480i/576i	O
	480p/576p	O	O
	720p/1080i	O	O
	1080p	O	O
		(50/60Hz only)	(24Hz/30Hz/50Hz/60Hz)

13

 HDMI

1Connect the HDMI output of the digital set-top box to

the HDMI/DVI IN 1, HDMI IN 2 or HDMI IN

HDMI/DVI IN 1 , HDMI IN 2 HDMI IN 3

3(Except 42/50PQ1***, 42/50PQ3***) jack on the TV.

( )

		HDMI
	HDMI/DVI IN		HDMI IN
2	Select HDMI1, HDMI2 or HDMI3 (Except	1	2
	42/50PQ1***, 42/50PQ3***) input source using the
	( )
	INPUT button on the remote control.
	RS	IN	RGB(PC)
	(CONTROL&SERVICE)
3	HDMI1 HDMI2 HMDI3( )	1
	Turn on the digital set-top box.
	Refer to theINPUTowner’s manual for the digital set-top
	(
	box.)

A VIDEO

( Mono)

- -AUDIO

	! NOTE
				HDMI-DTV OUTPUT
	G Check that your HDMI cable is version 1.3 or higher.
	If the HDMI cables don’t support HDMI version 1.3, flicker-
	 HDMI HDMI 1.3
	ing or no screen display can result. Please use the latest
	cables that support at least HDMI version 1.3.
	 PCM
	G HDMI mode supports PCM audio format only.
	 PCM
	G Audio format was reseted to Dolby/DTS/Bitstrem in DVD
	Player or STB, it should be changed to PCM.

Connecting with an HDMI to DVI cable

HDMI DVI

1Connect the DVI output of the digital set-top box to the HDMHDMI/DVI/DVI IIN 1 jack on the TV.

2	Connect the audio output of the digital set-top box to
	the AAUDIOIOINN(RGB/DVI)RGB/DVI) jack on the TV.
3
	Turn on the digital set-top box. (Refer to the owner’s
	( )
	manual for the digital set-top box.)

4SelectHDMI1DMI1 input sourceINPUTusing the INPUT button on the remote control.

HDMI/DVI IN	HDMI
	HDMI IN
1	2

RS	IN	RGB(PC)
(CONTROL&SERVICE)
	1

!	NOTE
G	HDMI mode supports PCM audio format only.	DVI-DTV OUTPUT	L R
 HDMI PCM
G	Audio format was reseted to Dolby/DTS/Bitstrem in DVD
 PCM
	Player or STB, it should be changed to PCM.

	AUDIO IN
	(RGB/DVI)
AV
VIDEO	AUDIO OUT
AUDIO-	VARIABLE
)-
o
n
Mo
(
IN1	OUT

2

14

 (component)

Connect the video outputs(Y,Pb,Pr)

Y, P , P of the DVD to

1

(

B

R)

the CCOMPONENTPONENT VIDEON VIDEO jacks on the TV.

IN

Y

IN

2

PONENT I

AUDI

jacks on the TV.

PR PB

VIDEO COMPONENT

Connect the audio outp(Audiots ofL,R)the DVD to the COM-

COMPONENT IN AUDIO

1

3

L

Turn on the DVD player, insert a DVD.

AUDIO

ANTENNA

R

4

SelectComponentponent11 input sourceINPUTusing the INPUT

1

2

2

COMPONENT IN 2 Component 2

button on the remote control.

If connected to COMPONENT IN2, select

Component 2 input source .

L

R

Y

PB

PR

5Refer to the DVD player's manual for operating instructions(. )

Component Input ports Component

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV		PB	PR
	Y
	Y	PB	PR
Video output ports	Y	B-Y	R-Y
		Cb	Cr
on DVD player	Y
	Y	Pb	Pr

15

 HDMI

	Connect the HDMI output of the DVD to the
1			HDMI
	HDMI/DVI IN 1, HDMI IN 2 or HDMI IN 3(Except
	HDMI/DVI IN 1 , HDMI IN 2 HDMI IN 3	HDMI/DVI IN		HDMI IN
	42/50PQ1***, 42/50PQ3***) jack on the TV.	1		2
	( )
2		RS	IN
	Select HDMI1, HDMI2 or HDMI3(Except			RGB(PC)
	42/50PQ1***, 42/50PQ3***) input source using the	(CONTROL	)
	( )
	INPUT button on the remote control.
		1
3	HDMI1 HDMI2 HMDI3( )
	Refer to the DVD player's manual for operating instruc-
	tions. INPUT
		HDMI-DVD OUTPUT

AUDIO - VIDEO

-) Mono (

! NOTE

G The TV can receive video and audio signals simultaneously

 HDMI HDMI 1.3 when using a HDMI cable.

G If the DVD does not support Auto HDMI, you must set the

 output resolution appropriately.

G Check that your HDMI cable is version 1.3 or higher.

If the HDMI cables don’t support HDMI version 1.3, flicker-

 HDMI ing or no screen display can result. Please use the latest

 HDMI PCM

cables that support at least HDMI version 1.3.

 PCM

G HDMI mode supports PCM audio format only.

G Audio format was reseted to Dolby/DTS/Bitstrem in DVD Player or STB, it should be changed to PCM.

16



 RF

- AUDIO - (M		VARIABLEAUDIO	R L	AUDIO
IN1	OUT	1		2

ANTENNA

IN

1

ANT OUT	S-VIDEO	VIDEO L	R
ANT IN	OUTPUT
	SWITCH
2	Wall Jack

Antenna

1	Connect the AN O T socket of the VCR to the	NTENNA IN socket on the TV.
	ANT OUT ANTENNA IN
2	Connect the antenna cable to theANTNTIN IN socket of the VCR.
3	Press the PLAY button on the VCR and match the appropriate programme between the TV and VCR for
	PLAY

viewing.

17

 RCA
		ANT IN	S-VIDEO	VIDEO	L	R
		ANT OUT	OUTPUT
			SWITCH
					1
					Y		IN
			AUDIO IN			VIDEO COMPONENT
			(RGB/DVI)		PR PB
HDMI		AV
VI IN	HDMI IN	VIDEO
	2
		AUDIO- (Mono)	AUDIO		L	AUDIO	ANTENNA
							IN
IN	RGB(PC)	-			R
		IN1	OUT	1		2
RVICE)

1	Connect the AUDIO/V DE		jacks between TV and VCR. Match the jack colours (Video = yellow,
	AUDIO/VIDEO(			- - -)
	Audio Left = white, and Audio Right = red)
	AV IN1
2	PLAY
	Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
	( )
3	AV IN1 INPUT
	Select AV1 input source using the INPUT button on the remote control.
	AV IN2 AV IN2
	If connected to AV IN2, select AV2 input source.

! NOTE

GIf you have a mono VCR, connect the audio cable fromAUDIOthe VCRL/MONOto the AUDIO L/MONO jack of the TV.

18

Camcorder

Video Game Set

VIDEO L R

IN 3

or		Camcorder
1
(CONTROL)
	AUDIO IN
RGB IN (PC)	(RGB/DVI)
				Video Game Set
AV IN2
	VIDEO	L/MONO AUDIO R
		IN1AV
L	R
AUDIO		ANTENNA
NT IN		IN
		VIDEO	L	R

				1
1	AUDIO/VIDEO(	- - -)
	Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours .
	AV IN1
	(Video = yellow, Audio Left = white, and Audio Right = red)

2SelectAVAVIN1 input sourceINPUTwith using the INPUT button on theAVremoteIN2 controlAV IN2. If connected to AV IN 2, select AV2 input source.

3 Operate the corresponding external equipment.

( )

Refer to external equipment operating guide.

19

(External

Use to connected either an external amplifier, or add a sub-woofer VIDEO /MONO AUDIO to your surround sound system.

L R

1 IN AV

Connect the input jack of the stereo amplifierVARIABLEto the

1AUDIORIABLEVOUT AUDIO OUT jacks on the TV.

AUDIO	VARIABLE AUDIO OUT	ANTENNA
T IN	AV OUT	IN

Set up your speakers through your analog stereo

2

amplifier, according to the instructions provided with

( ) the amplifier.

! NOTE

1

G When connecting with external audio equipments, such as

amplifiers or speakers, please turn the TV speakers off.(G p.99)

G Select Variable Out in AUDIO menu to connect the VARIABLE AUDIO OUT jacks.(G p.100)

AV OUTPUT SETUP

VIDEO /MONO AUDIO

The TV has a special signal output capability which allows you

to hook up the second TV or monitor.	R

1 IN AV

		O	VARIABLE AUDIO OUT	ANTENNA
			AV OUT	IN
	AV OUT
1	Connect the second TV or monitor to the TV’s	AV OUT
	AVjacksIN.

See the Operating Manual of the second TV or monitor 2 ( )for further details regarding that device’s input settings.

1
! NOTE
G Component, RGB, HDMI input sources cannot be used for
 Component , RGB , HDMI
AV out.
 AV OUT	S-VIDEO
G We recommend to use the AV OUT jacks for VCR recording.
VIDEO L	R

20

USB

1

IN 3

1Connect theUSBUSB deviceUSBto theIN USB IN jack on the TV.

2After connecting the USB IN jacks, you use the USBUSBfunction. (G p.68)

21

Plug & Play

Connecting with a D-sub 15 pinDcable-Sub 15 pin

1Connect theRGB output of the PCRGBtoINthe(PC)RGB IN(PC) jack on the TV.

2Connect the PC audio output to theAUDIOUDIOIN (RGB/DVI)N

(RGB/DVI) jack on the TV.

3Turn on the TV and the PC.

4	Select RGB input source using the INPUT button on
	RGB INPUT
	the remote control.

	RS-232C IN
/DVI IN	(CONTROL)
	AUDIO IN
	(RGB/DVI)
	RGB IN (PC)

VIDEO /MONO AUDIO

PB PR

VIDEO	VARIABLE AUDIO OU
COMPONENT	AV OUT

12

RGB OUTPUT	AUDIO

22

Support Display Resolution

RGB-PC mode				HDMI-DTV mode
Resolution	Horizontal	Vertical		Resolution	Horizontal	Vertical
	Frequency(kHz)	Frequency(Hz)			Frequency(kHz)	Frequency(Hz)
640x350	31.468	70.09		720x480	31.47	59.94
					31.50	60.00

		720x400	31.469	70.09
		640x480	31.469	59.94
		800x600	37.879	60.317
		1024x768	48.363	60.004
		1280x768	47.776	59.87
		1360x768	47.720	59.799
		1280x1024	63.668	59.895
		1920x1080	66.587	59.934

Except 42PQ1****,472PQ3***,***, 42PQ6***

,42PQ6***,42PS6***,42PQ7******,42PQ7***

	720x576	31.25	50.00
	1280x720	44.96	59.94
		45.00	60.00
		37.50	50.00
		33.72	59.94
		33.75	60.00
		28.125	50.00
	1920x1080	67.432	59.94
		67.5	60
		56.250	50
		27	24
		33.75	30

FullHD

Only FHD Model

! NOTE

	G Avoid keeping a fixed image on the TV ’s screen		50PS6***, 50PQ7***, 50PS8*** Models
	for prolonged periods of time.The fixed image		WXGA) for the PC mode, this should provide the
	may become permanently imprinted on the		best picture quality.
	screen;use a screen saver when possible.	G	If the resolution of PC is over SXGA, there will be
	G There may be interference relating to resolution,		no picture on the TV.(Only HD Models)
	vertical pattern, contrast or brightness in PC	G	Connect the audio cable from the PC to the
	mode. Change the PC mode to another resolu-		Audio input on the TV.(Audio cables are not
	included withSXGAthe TV).
	tion or change the refresh rate to another rate or
	adjust the brightness and contrast on the menu	G If you use too long an RGB-PC cable, there may
	RGB 5
	until the picture is clear. If the refresh rate of the		be interference on the screen. We recommend

	1920X1080,60Hz FullHD 1360x768,60Hz HD
	PC graphic card can not be changed, change the		using under 5m of the cable. This provides the
	PC graphic card or consult the manufacturer of
			best picture quality.
	( )
	the PC graphic card.

 GHDMIThe synchronization input waveformPCMfor

Horizontal and Vertical frequencies are separate.

 Dolyby/DCM PCM

G We recommend using 1024 x 768, 60Hz (42PQ1***, 42PQ3***, 42PQ6***, 42PS6***, 42PQ7***, 42PS8*** Models XGA)/1360 x 768, 60Hz(50PQ1***, 50PQ3***, 50PQ6***,

23

Screen Reset

RGB[PC] Component( 480i,576i)

PICTURE			Move	OK	Screen	Move	Prev.
					Resolution
E
• Contrast	100
• Brightness		50			Auto Config.
• Sharpness		70			Position		To Set
• Colour		70
• Tint		0	R	G	Size
• Advanced Control
• Picture Reset					Phase
ScreenScreen
					Reset	G

MENU

OK

OK

SelectPICTUREICTURE.

SelectScreencreen.

SelectReseteset.

4

OK

SelectYeses.

OK Run RResett.

 MENU  RETURN

24

Position , Size , Phase

 Position : Component( 480i , 576i) RGB

Size,Phase : RGB

PICTURE		Move	OK	Screen	Move	Prev.
E				Resolution
• Contrast	100
• Brightness	50			Auto Config.
• Sharpness	70
• Colour	70			Position		D
					G
• Tint	0	R		G	F	G
• Advanced Control				Size		E
• Picture Reset				Phase
ScreenScreen
				Reset

MENU

SelectPICTUREICTURE.

OK SelectScreencreen.

OK SelectPosiotion,onSizeize, orPhasease.

4

Make appropriate adjustments.

 MENU  RETURN

25

(Resolution)

RGB[PC]

PICTURE		Move	OK	Screen		Move	Prev.
E				Resolution		1024 x 768
• Contrast	100				G
						1280 x 768
• Brightness	50			Auto Config.
						1360 x 768
• Sharpness	70
• Colour	70			Position
• Tint	0	R		G
• Advanced Control				Size
• Picture Reset				Phase
ScreenScreen
				Reset

MENU

OK

PICTUREICTURE

Select .

SelectScreencreen.

	OK	SelectResolutionesolution.
4
		Select the desired resolution.

 MENU  RETURN

26

( RGB[PC])

 RGB[PC]

Auto Configure

PICTURE		Move	OK	Screen	Move	Prev.
E
• Contrast	100			Resolution
• Brightness	50			Auto Config. G
• Sharpness	70
• Colour	70			Position	To Set
• Tint	0	R		G
					Yes	No
• Advanced Control				Size
• Picture Reset				Phase
ScreenScreen
				Reset

MENU

OK

SelectPICTUREICTURE.

SelectScreencreen.

• If the position of the image is still not correct,

try Auto adjustment again.

• If picture needs to be adjusted again after Auto

Position , Size Phase

adjustment in RGB (PC), you can adjust the

Position, Size or Phase.

OK

SelectAutoutConfigConfig. ..

4

OK

SelectYess.

OK Run AutotoConfigonfig. ..

 MENU  RETURN

27

/

( 42/50PQ1***, 42/50PQ3***)



POWER

RATIO INPUT

AV MODE

ENERGY SAVING

1 2 3

4 5 6

7 8 9

LIST 0 Q.VIEW

MUTE

P

P AG

E

OK

MENU	RETURN
1	FAV
Q.MENU	FREEZE MARK

((Only 42/50PQ142/50PQ1***)***)

FREEZE

FAV

Q.MENU

RATIO Selects your desired picture format.

AV MODE It helps you select and set images and sounds when connecting AV devices.(G p.47)

POWER Switches/the TV on from Standbystandby or off to standby.

INPUT External input mode rotate in regular sequence.

Standby

Switches the TV on from standby.

ENERGY Adjust the power saving mode of the TV.

SAVING

0~9 number Selects a programme.

button Selects numbered items in a menu.

LIST Displays the programme table.

Q.VIEW Returns to the previously viewed programme.

VOLUME UP Adjusts the volume.

/DOWN

MUTE Switches/the sound on or off.

Programme Selects a programme.

UP/DOWN

PAGE Move from one full set of screen information to the next

UP/DOWN one.

1 TELETEXT These buttonsTELETEXTare used for teletext.

BUTTONS For further details, see the ‘Teletext’ section.(G p.99)

Coloured These buttons are usedTELETEXTfor teletext (on TELETEXT buttons models only) , Programme edit.

28

POWER

RATIO INPUT

AV MODE

ENERGY SAVING

1 2 3

4 5 6

7 8 9

LIST 0 Q.VIEW

MUTE

P

P AG

E

OK

MENU

RETURN

2

FAV

Q.MENU FREEZE MARK

((Only 42/50PQ142/50PQ1***))

***

FREEZE

FAV

Q.MENU

THUMBSTICK

(Up/Down/Left/

Right)

OK

MENU

RETURN

2 SIMPLINK / USB Menu control buttons

FAV

MARK

Q. MENU

FREEZE

Allows(you to navigate the on-screen)menus and adjust the system settings to your preference.

Accepts your selection or displays the current mode.

Selects a menu. Clears all on-screen displays and returns to TV viewing

from any menu.

Allows the user to move return one step in an interactive application or other user interaction function.

Controls SIMPLINK or USB menu.

SIMPLINK USB

Displays the selected favourite programme.

Check and un-check programmesUSB in the USB menu.

See a list of AV devices connected to TV.

SIMPLINK

When you toggle this button, the Simplink menu appears at the screen.(G p.43)

Select the desiredQ.MENUquick( menu source. G p.33) )

Pause the present picture (at the screenUSB. It) doesn't work at USB Mode.)

The TV returns to normal viewing automatically if no signal is received or no operation is performed for 5 minutes.

Controls the USBUSBmenu.

Installing Batteries

	Open the battery compartment cover on
		the back and install the batteries matching
1.5V 2
		correct polarity (+with +,-with -).
	(
		Install two 1.5V AAA batteries. Do not mix
- -)
		old or used batteries with new ones.

Close cover.

29

/

( 42/50PQ1***, 42/50PQ3***)



RATIO POWER

ENERGYSAVING

SLEEP

Q. MENU MENU

OK

RETURN AV MODE

MARK

FAV

P

A

G

E

MUTE

1 2 3

4 5 6

7 8 9

LIST 0 Q.VIEW

RATIO Selects your desired picture format.

SLEEP

POWER

INPUT

ENERGY SAVING

Q.MENU MENU

Sets the sleep timer.

Switches/the TV on from stStandby or off to standby.

External input mode rotate in regular sequence.

Standby

Switches the TV on from standby.

Adjust the power saving mode of the TV.

Select the desiredQ.MENUquick( menu source. G p.33) )

Selects a menu.

Clears all on-screen displays and returns to TV viewing

from any menu.

See a list ofSIMPLINKAV devices connected to TV.

When you toggle this button, the Simplink menu appears at the screen.(G p.43)

THUMBSTICK Allows you to navigate the on-screen menus and adjust

( )

(Up/Down/Left/ the system settings to your preference.

Right)

OK Accepts your selection or displays the current mode.

RETURN Allows the user to move return one step in an interactive application or other user interaction function.

USB

Controls the USB menu.

AV MODE

It helps you select and set images and sounds when connecting AV devices.(G p.47)

1	FREEZE	TELETEXT
	Coloured	These buttons are used for teletext (on TELETEXT
	buttons	models only) , Programme edit.
	1 TELETEXT	These buttons are used for teletext.
	BUTTONS	TELETEXT
		For further details, see the ‘Teletext’ section.(G p.99)

FREEZE Pause the present picture at( the screen.USBIt )doesn't work at USB Mode.)

The TV returns to normal viewing automatically if no signal is received or no operation is performed for 5 minutes.

30