P/NO : 3828A20132S
www.lg.com
INSTALLATION MANUAL
AIR CONDITIONER
• Please read this installation manual completely before installing the product.
• Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
• Please retain this installation manual for future reference after reading it
thoroughly.
TYPE : Simple Central Controller
Model : PQCSB101S0
ENGLISH ITALIANO ESPAÑOL FRANÇAIS
DEUTSCH
кмллдавьбхд
2 Simple Central Controller
Central Control Unit Use & Care Manual
TABLE OF CONTENTS
■ Safety precautions ..................................................................3
■ Name of each part ...................................................................6
Central controller .........................................................................................6
Annexed parts...............................................................................................6
■ Dimensional drawing ..............................................................7
■ System wiring drawing ..........................................................8
■ Method of installation ...........................................................11
■ Method to connect wires ......................................................13
■ Network interfce connection................................................14
■ Method to set switch.............................................................15
Group setting .............................................................................................15
Setting of master/slave ..............................................................................15
Master/slave setting when applying LGAP .................................................16
Connection method of function controller ...................................................17
■ Addressing of indoor unit ....................................................18
■ Troubleshooting....................................................................20
ENGLISH
Safety Precautions
Installation Manual 3
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.
■ Meanings of symbols used in this manual are as shown below.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage.
Be sure not to do.
Be sure to follow the instruction.
Don't install the controller in the nearby
computer, automatic door, elevator.
•
Otherwise, it will cause the abnormal operation.
Don't install the controller in the nearby
extremely humid or trembling area.
•
There is risk of product damage.
■ Installation
Avoid direct sun-rays and heat source.
•
There is risk of product damage.
Use standard parts(connector).
•
Do not disassemble or repair the product. There is
risk of fire or electric shock.
Safety Precautions
4 Simple Central Controller
Be cautious that water could not enter the
product.
• There is risk of fire, electric shock, or product
damage.
Donʼt handle the controller with wethand.
• There is risk of fire or electric shock.
■ Operation
For electrical work, contact the dealer, seller,
a qualified electrician, or an Authorized
Service Center.
•
Do not disassemble or repair the product. There
is risk of fire or electric shock.
Do not install, remove, or re-install the unit
by yourself (customer).
• There is risk of fire, electric shock, explosion,
or injury.
For installation, always contact the dealer or
an Authorized Service Center.
• There is risk of fire, electric shock, explosion,
or injury.
When the product is soaked (flooded or
submerged), contact an Authorized Service
Center.
• There is risk of fire or electric shock.
ENGLISH
Safety Precautions
Installation Manual 5
Donʼt pull the lead wire.
• There is risk of fire, electric shock, or product
damage.
Do not lay on heavy things on power
cords.
• It may cause fire or electric shock.
Name of Each Part
6 Simple Central Controller
Simple Central controller
Annexed parts
1
1. On/Off status display LED (total 16EA)
Displays the status of the indoor unit if
individual On/Off button is pressed.
• Cooling/dehumidification/blowing
3
operation: Green
• Heating operation: Orange
• Failure of product: Red
• Stop: Off
2
Central controller anchoring
screws (4EA)
4
2. Power display LED
• Application of power: Green
• No power: Off
• During control: Flickering
5
3. Individual On/Off button (total 16EA)
On/Off control of the connected indoor
units.
4. Total Off button
Sequentially turns off all indoor units
connected to it.
5. Total On button
Sequentially starts all indoor units
connected to it.
Owner/Installation manual Actual name description
sheet
Addressing remote control AAA cell (2EA) Guide sheet