LG PDRYCB100 INSTALLATION MANUAL
www.lg.com
INSTALLATION MANUAL
AIR
CONDITIONER
Please read this installation manual completely before installing
the product.
Installation work must be performed in accordance with the
national wiring standards by authorized personnel only.
Please retain this installation manual for future reference after
reading it thoroughly.
Simple Dry contact
PDRYCB100
P/NO : MFL69265502
Rev.00_020717
ENGLISH
ITALIANO ESPAÑOL
FRANÇAIS
DEUTSCH
ΕΛΛΗΝΙΚΆ
ČEŠTINA
NEDERLANDS
POLSKI
LIMBA ROMÂNĂ
PORTUGUÊS
MAGYAR
БЪЛГАРСKN
SRPSKI
HRVATSKI
SVENSKA
NORSK
SUOMI
DANSK
EESTI KEEL
MALTI
SLOVENČINA
РУССКИЙ ЯЗЫК
SLOVENŠČINA
LATVIEŠU VALODA
LIETUVIŲ KALBA
GAEILGE
МАКЕДОНСКИ
SHQIP
ÍSLENSKA
BOSANSKI
LG Electronics Inc.
EU Representative : LG Electronics European Shared Service Center B.V.
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
Manufacturer: LG Electronics Inc. Changwon 2nd factory, 84, Wanam-ro,
Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA
Safety Precautions
Installation Manual 3
n Installation
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.
n Meanings of symbols used in this manual are as shown below.
WARNING
CAUTION
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage.
Be sure not to do.
Be sure to follow the instruction.
WARNING
Don’t touch with the hands
while the power is on.
• Cause fire, electric shock, explosion or injury.
Product installation must
be referred to a service
center or installation shop.
• Cause fire, electric shock, explosion or injury.
Request installation from
installation shop or service
center when reinstalling
the product.
• Cause fire, electric shock, explosion or injury.
Safety Precautions
2 Dry Contact
ENGLISH
Dry Contact Unit Installation Manual
TABLE OF CONTENTS
n Safety Precautions
.................................................................
3
n Overview
................................................................................
6
n Part Description
......................................................................
8
n Installation Method
.................................................................
9
Installation................................................................................................9
n Installation Guide
..................................................................
11
Step1......................................................................................................11
Step2......................................................................................................12
n Administrator Guide
.............................................................
13
Service
Center
Service
Center
Safety Precautions
Installation Manual 5
Do not spill water inside of
the product.
• Cause electric shock or
breakdown.
If the product has been inundated, you must refer to a
service center or installation
shop.
• It can cause a fire.
Children and elderly use the
product under the
guardian’s supervision.
• Cause accidents and product
failures.
Do not use for special purpose / place such as conserving flora and fauna,
precision instruments, art.
• Otherwise, it can cause property
damage.
Remove the power plug
when cleaning.
• Cause fire or electric shock.
Do not place heavy objects
on the power line.
• Cause fire or electric shock.
Do not disassemble, repair,
or modify the product.
• Cause fire or electric shock.
Do not touch with wet
hands.
• Cause fire or electric shock.
Safety Precautions
4 Dry Contact
ENGLISH
Do not install the product
in the place where rain can
get to the product.
• Cause product failure
Do not install the unit in
humid locations.
• Cause product failure
Do not put the product
closer to fire.
• Cause fire
Do not install in a place
that cannot withstand the
weight of the product.
• The product may get damaged or may break.
Do not install the product
to a place that generates
oil, steam, salt, sulfuric
gas, etc.
• Cause the product’s deformation or failure.
Use standardized Product.
• Cause product failure
Do not change or extend
power lines arbitrarily.
• Cause fire or electric shock.
Do not give a shock to the
product.
• If you give a shock to the product, it may cause the product’s
failure.
Do not use a heater near
the power line.
• Cause fire or electric shock.
STOP
n Operation
Standardized
product
Service
Center
Loading...