LG HBM-800 - - Bluetooth hands-free Car, HBM-800 User Manual

All rights reserved.

LG Electronics Inc., 2008

Note : For the best performance and

to prevent any damage to, or misuse of the

HBM-800, please read all of the information

carefully prior to using the HBM-800.

Any modifications or changes to this manual due to

typographical errors or inaccuracies of stated information

shall only be made by LG Electronics Inc.

LG Electronics

BLUETOOTH®Mono Headset
HBM-800 User manual

English

Español

3

Introduction

The LG Bluetooth®Headset HBM-800 is a lightweight wireless
Headset utilizing Bluetooth®technology. This product can be used
as an audio accessory for devices supporting either the Headset
or Handsfree Bluetooth®Profiles. If the Headset is attached to the
Cradle, it can be used as a Hands Free Kit.

Included in package

2

Table of Contents

Introduction 3

- Included in Package 3

Part Description 4

- Headset 4

- Cradle 4

- Small Charging Cradle 4

How to use Headset 5

- Before Use 5

- Charging 5

- Low battery 5

- Power on 5

- Power off 5

- Pairing 5

�Easy Pairing 5
�Manual Pairing 6

- Auto Reconnect 6

- Volume control 7

- Calling 7

�Answering a call 7
�Making a call 7
�Voice dialing 7
�Last number redial 7
�Ending a call 7
�Transferring a call 7
�Call waiting 8
�Call Reject 8

- Multipoint 8

�Multipoint Connect 8
�Calling Functions 8

- Sun Visor Clip 9

How to use Cradle 9

- Charging 9

- Low battery 9

- Power on 9

- Power off 9

- Volume control 9

- Using HBM-800 as Hands Free Kit 10

�Calling 10
�Microphone Mute 10

Summary of button functions 10
LED indication 11
Troubleshooting 12
Specification 12
Precautions 13
Declaration of confirmation 14
Additional information 14
Limited warranty 16
Important safety information 16

HBM-800

Bluetooth

®

Headset

Quick Start Guide

Vehicle Power Adaptor

Cradle

Small Charging Cradle

User manual

Charger

Warranty Card

Ear loop

Cradle

4 5

Part Description

Charging

Low battery

Power on

Pairing

Power off

- Attach the Headset to the Cradle.
�The headset will always charge when attached to the cradle, even if

both the headset and cradle are powered off.

�If the cradle battery is empty, the headset will not charge (the LED

indicator on the headset will not turn on, while in the cradle).

- The LED indicator will show a solid red light.

- It takes 2 hours to fully charge the Headset.

- When charging is complete, the LED indicator will turn off.

- The headset can also be charged using the Small Charging Cradle.
First, connect the charger to the charging port on the Small Charging
Cradle, then attach the HBM-800 headset.

- Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled handset.

- There are 2 Pairing Mode Methods with the HBM-800.

1) Easy Pairing

� With the Power off, press and hold the PWR button for 3 seconds,

to turn on the HBM-800.

� The Headset will enter Auto-Reconnect mode, for 10 seconds (If your

Headset has been previously paired to the handset, the Headset will

automatically reconnect to the handset, when the HBM-800 is powered on.)

Speaker

MIC

Headset

- A low battery tone will play once every 30 seconds.
Recharge the battery when the low battery beep is heard.

- If the battery is not charged, the Headset will turn off.

Volume UP
/ Down Button

MFB(Multi-

Function Button)

Charging Port

Speaker
LED indicator(Red)

for charging status

LED indicator(Blue)
for Bluetooth status

- Press and Hold the PWR button for 3 seconds.

�The power will turn on and a booting tone will play.

- Press and hold the PWR button for 4 seconds.
�A shutdown tone will play, the Bluetooth link will disconnect,

and the power will turn off.

Volume UP / Down Button

LED indicator(Blue)
for Bluetooth status

Call Button

LED indicator(Red)
for charging status

Power Button

Small Charging Cradle

* Small Charging Cradle is only used for charging the HBM-800 Headset.

Charging Port

Before Use

How to use Headset

- Before using the HBM-800 headset, you will need to remove the

protective film which is covering the contacts on the headset.

Protective film

76

How to use Headset

Volume control

� After 10 seconds, the HBM-800 will automatically enter Paring Mode.
� When the headset enters Pairing Mode, the LED indicator will show

a solid blue light.

� Using your handset, find the Bluetooth Menu and “search for” or

“add” new devices.

�

Select “LG HBM-800” from the list of devices and pair it with your handset.

� When asked for the Pass/PIN code during the pairing procedure,

please enter “0000” (4 Zeros).

� Once pairing has completed successfully, you will hear a beep.

� After pairing successfully, be sure to “Connect” to the LG HBM-800.
� If you want to pair with a different device in the future, the Headset

must be placed in Pairing Mode.

� If the headset is in Pairing mode for three minutes without being

connected to a handset, the HBM-800 will automatically turn off.

2) Manual Pairing

� With the Power off, press and hold the PWR button for 5 seconds.
� When the Headset enters Pairing Mode, the LED indicator will show

a solid blue light.

� Using your handset, find the Bluetooth Menu and “search for” or

“add” new devices.

�

Select “LG HBM-800” from the list of devices and pair it with your Handset.

� When asked for the Pass/Pin code during the pairing procedure,

please enter “0000” (4 Zeros)

� Once pairing has completed successfully, you will hear a beep.
� After pairing successfully, be sure to “Connect” to the LG HBM-800.
� If you want to pair with a different device in the future, the Headset

must be placed in Pairing Mode.

� If the headset is in Pairing mode for three minutes without being

connected to a Handset, the HBM-800 will automatically turn off.

Calling

Answering a call

- When there is an incoming call, the Headset will ring.

- Briefly press the CALL button to answer an incoming call.

Making a call

- If you make a call from the handset, the call will (subject to handset
settings) automatically transfer to the Headset. If the call is not
automatically transferred, you can manually transfer the call by briefly
pressing the CALL button on the HBM-800 (handset and headset
must be paired).

Voice dialing*

- Briefly press the CALL button to activate “Voice Command”. You will get
the best results if you record the voice dialing tag through your Headset.
NOTE: If the handset does not support Voice Dialing, it is possible

that performing this action will activate Last Number redial.

Last number redial*

- Press and hold the CALL button for 1second to activate “Last Number
Redial”. The Headset will beep, and call the last number dialed.

Ending a call

- Briefly press the CALL button.

Transferring a call*

- While on a call on your handset, briefly press the CALL button to transfer
the audio to the Headset.(Headset and handset must be paired).

- And to transfer a call from the Headset to handset, press and hold
VOLUME UP button on the HBM-800 headset for 5 seconds.

How to use Headset

- Press the VOLUME UP or VOLUME DOWN button to adjust the
speaker volume.

- You will hear an alert beep tone when the volume is at the maximum
or minimum level.

Auto Reconnect

- When the HBM-800 turns off (accidentally or intentionally) while
connected to a handset, the headset and handset will disconnect.
The Headset and handset will automatically reconnect when the HBM­800 is turned back on.(as long as both devices are within the required
range of 33ft. or 10m)

[ Out of range ]

- When the HBM-800 and your handset are separated by a distance of
33 feet (10 meters) or more, the Headset and handset will disconnect.

When the handset and HBM-800 are brought back within the required
distance, the HBM-800 will automatically reconnect with the handset.

- If the Headset and handset do not automatically reconnect when they
are back within the required range, briefly press the CALL button on
the HBM-800 to reconnect manually.

8

How to use Headset

Call waiting*

- Answer a second call without hanging up the first call by pressing the
CALL button for 1second. Press the CALL button for 1second to return
to the original call.

- Briefly press the CALL button to terminate the active call or both calls
at once. (subject to handset's support)

Call Reject*

- Activate Call Reject by pressing the CALL button for 1second when
the headset rings.

* It is possible to use these functions only when your handset supports

them. For further information about using these features, please
consult your handset's user manual.

9

Multipoint

The LG HBM-800 is capable of having two handsets connected to the
Headset at the same time. This will give you the freedom of having only
one Headset to operate both of your handsets.

Multipoint Connect

- Pair the Headset with one of your Bluetooth-enabled handsets.
(Refer to the pairing instructions on pages 5-6).

- Turn off the Headset.

- With the power off, press and hold the PWR button on the HBM-800
for 5 seconds to enter Manual Pairing mode.

- Now, pair and connect the Headset with your other Bluetooth-enabled
handset. (This will be your Primary handset).

- Once this handset is paired and connected, go back and connect the
first paired handset to Headset. (This process should be done through
your handset's Bluetooth menu)

* Note: When the HBM-800 is connected to two handsets at the same

time (Multipoint), the Headset calling functions will work with
the most recently used handset.

Calling Functions

- Voice Dial and Last Number Redial features work with the Primary
handset. (most recently used handset).

- The first connected device is set as primary handset and the next
connected device is set as secondary handset.

- The device which made the last outgoing call will always be set as
the primary handset.

Sun Visor Clip

How to use Cradle

Power off

Low battery

Power on

- A low battery tone will play once every 30 seconds.

- If the battery is not charged, the Cradle will turn off.

Charging

- Remove the cover on the charging port and connect the charger.

- The LED indicator will show a solid red light.

- It takes 2 hours to fully charge the Cradle.

- When charging is complete, the LED indicator will turn off.

Volume control

- Press and hold the MFB for 3 seconds.

- Press and Hold the MFB for 3 seconds.
�The power will turn on and a booting tone will play.

- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker
volume.

- There are eight levels of speaker volume.

- You will hear an alert tone when the volume is at the maximum or
minimum level.

How to use Headset

- To answer an incoming call on your secondary handset, while on a call
on your primary handset, hang-up the active-call (briefly press the CALL
button) and then answer the incoming-call (briefly press the CALL button
again).

How to use Cradle

11

LED indication

Function Action

Operating Power on The blue LED light flickers once.

Power off The blue LED light flickers once.
Standby & Talk The blue LED light flickers once every

4 seconds.

Charging Charging The red LED light stays on.

Charging complete The red LED light turns off

HBM-800(Cradle)

Status

Function

Action

Operating Power on The blue LED light flickers 4 times.

Power off The blue LED light flickers 4 times

and then turns off.
Pairing mode The blue LED light stays on.
Headset/handsfree The blue LED light flickers
Profile connected 2 times every 5 seconds.
Call connected The blue LED light flickers

2 times every 5 seconds.

Charging Charging The red LED light stays on.

Charging complete The red LED light turns off.

HBM-800(Headset)

Status

Summary of button functions

Summary of button functions

Function

HBM-800

Status

Action

Power on Power off Press the PWR/MFB button for 3 seconds.(headset/cradle)
Power off Power on Press the PWR button for at least 4 seconds.(headset)

Press the MFB for at least 3 seconds.(cradle)
Volume up Talking Briefly press the Volume Up button.
Volume down Talking Briefly press the Volume Down button.
Transferring a call Talking - Handset to Headset : Briefly press the CALL button on

the headset. (Headset and Handset must be paired.)

- Handset to cradle: Briefly press the MFB on the cradle
(headset must be attached to cradle, and paired to
handset).

- Headset to Handset : Press and hold the VOLUME
UP button on the Headset for 5 seconds.

- Call Transfer from cradle to handset is not supported.

Answering a call Ringing Briefly press the CALL button (headset).

Briefly press the MFB (cradle).

Ending a call Talking Briefly press the CALL button (headset).

Briefly press the MFB (cradle).

Call waiting Talking Press the CALL button for 1 second (headset).

Press the MFB for 1 second (cradle).
Last number Idle Press the CALL button for 1 second (headset).
redial Press the MFB for 1 second (cradle).
Voice dialing Idle Briefly press the CALL button (headset).
(handset must Briefly press the MFB (cradle).
support)
Manual pairing Power off

Press the PWR button for 5 seconds.
(Headset)
Call reject Ringing Press the

CALL

button for 1 second (headset).

Press the MFB for 1 second(cradle).
Microphone Mute Talking as

Press the volume down of Cradle for 5 seconds.
/Unmute (Cradle) Hands Free Kit
Call Functions:

- Use the MFB on the cradle, to access all of the

Cradle

same calling functions as the headset.

Using HBM-800 as a Hands Free Kit

Calling

- Please use the MFB to activate all calling functions, when using the
HBM-800 as a hands free kit. The MFB acts the same as the CALL
button on the headset.

- All calling functions are the same as the headset calling functions.

- When the headset is attached to the cradle, the headset CALL button is
deactivated, and will not work.

- Call Transfer is NOT supported when using the cradle as a hands free kit

- Once the headset is attached to the cradle, all audio will be played
through the cradle.

Microphone Mute/Unmute

- While on a call. press and hold Volume Down button for 5 seconds to
mute/unmute the MIC

- To use the HBM-800 as a Hands Free Kit,

1) Power on the Cradle

2) Attach the headset to the Cradle.

10