Page 1
www.lg.com
LG Electronics
BLUETOOTH® Mono Headset
HBM-586
User Manual
Note : For the best performance and to prevent
Any modifi cations or changes to this manual due to
typographical errors or inaccuracies of stated information
English
Español
Rev 1.0 US
All rights reserved.
LG Electronics Inc., 2011
any damage to, or misuse of the HBM-586,
please read all of the information carefully
before to using the HBM-586.
shall only be made by LG Electronics Inc.
Page 2
Table of Contents
ENG
Introduction 3
- Included in Package 3
Description of parts 4
How to use 4
- Change direction 4
- Charging 5
- Low battery 5
- Battery status alert 5
- Power on 5
- Power off 5
- Pairing 6
• Easy Pairing 6
• Manual Pairing 6
- Auto Reconnect 7
• Out of range 7
- Volume control 7
- Calling 8
• Answering a call 8
• Making a call 8
• Voice dialing 8
• Last number redial 8
• Ending a call 8
• Transferring a call 8
• Call waiting 8
• Call Reject 9
- Advanced multipoint 9
• Connection 9
• Calling function 9
- Audio Streaming (A2DP) 10
- SMS Reader 10
Summary of button functions 11
LED indication 12
Troubleshooting 12
Specification 13
Precautions 13
Declaration of confirmation 14
Additional information 14
Limited warranty 17
Important safety information 17
2 3
The LG Bluetooth
Bluetooth® technology.
This product can be used as an audio accessory for devices that support the
headset, hands-free and A2DP Bluetooth® profi les.
Included in the package
LG HBM-586
Bluetooth®
Headset
Small Charging
Cradle
®
Headset HBM-586 is a light weight wireless headset that uses
Ear loop 5 Pin Data
Cable
Ear buds User manual Quick Start
Introduction
Adapter Vehicle Power
Guide
Adapter
Warranty Card
ENG
Page 3
Description of parts How to use
Headset
ENG
MFB
(Multi-Function Button)
Volume Button
LED Indicator
Speaker
Charging Contacts
Mic
Small Charging Cradle
Charging Port
Vehicle Power Adapter
USB Port
LED Indicator
How to use
Change direction
4 5
Left Right
Charging
- Slide the HBM-586 into the Small Charging Cradle or the Vehicle Power Adapter.
- When the headset is placed into either charging device, the headset will turn of
- While charging, the LED indicator on the headset will show a solid white light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.
NOTE: When the HBM-586 is removed from the charging device (Small
Charging Cradle or Vehicle Power Adapter), it will automatically power
ON. If the headset has already been paired to your handset, it will
automatically reconnect when removed.
Low battery
- An announcement will play once every 2 minutes.
- If the battery is not charged, the headset will turn of
Battery status alert
- By pressing and holding the VOLUME button for 3 seconds, you can check the
battery status of the HBM-586. The audible battery status alert will inform you of the
battery level. There are 3 levels of battery power:
1. Battery High
2. Battery Medium
3. Battery Low
f.
f.
Power on
- Press and hold the MFB for 3 seconds.
The power will turn on and a startup tone will play.
•
- The audible battery status alert will let you know the battery level.
Power off
- Press and hold the MFB for 3 seconds.
A shutdown tone will play, the Bluetooth link will disconnect and the power will
•
turn off.
ENG
Page 4
How to use
Pairing
ENG
- Before using the headset for the fi rst time, it must be paired with a Bluetooth-
enabled handset.
- There are 2 pairing modes with the HBM-586.
1) Easy Pairing
• Press and hold the MFB for 3 seconds to turn on the HBM-586.
• The headset will enter auto-reconnect mode for 10 seconds. (if your headset
has already been paired with the handset, the headset will automatically
reconnect to the handset when the HBM-586 is powered on).
• After 10 seconds, the HBM-586 will automatically enter pairing mode.
• When the headset enters pairing mode, the LED indicator will show a solid
white light.
• Using your handset, fi nd the Bluetooth menu and “search for” or “add” new
devices.
• Select “LG HBM-586” from the list of devices and pair it with your handset.
• If you are asked for the passkey or PIN during pairing, please enter “0000”
(4 zeros).
• Once pairing has been completed successfully, you will hear “Headset paired”.
• After pairing has been completed, make sure you “connect” to the LG HBM-
586. You will hear “Connected”.
• If you want to pair with a different device in the future, the headset must be
placed into pairing mode.
• If the headset is in pairing mode for 3 minutes without being connected to a
handset, the HBM-586 will automatically turn off.
2) Manual Pairing
• With the power off, press and hold the MFB for 6 seconds.
• When the headset enters pairing mode, the LED indicator will show a solid
white light.
• Using your handset, fi nd the Bluetooth menu and “search for” or “add” new
devices.
• Select “LG HBM-586” from the list of devices and pair it with your handset.
• If you are asked for the passkey or PIN during pairing, please enter “0000”
(4 zeros).
6 7
• Once pairing has been completed successfully, you will hear “Headset paired”.
• After pairing has been completed, make sure you “connect” to the LG HBM-586.
You will hear “Connected”
• If you want to pair with a different device in the future, the headset must be
placed into pairing mode.
• If the headset is in pairing mode for 3 minutes without being connected to a
handset, the HBM-586 will automatically turn off.
Auto reconnect
- If the HBM-586 is turned of
to a handset, the headset and handset will disconnect.
The headset and handset will automatically reconnect when the HBM-586 is
turned back on (provided that both devices are within the required range of 33
feet 10 meters).
Out of range
- When your handset and HBM-586 are separated by a range of 33 feet (10
meters) or more, the headset and handset will disconnect.
When the handset and HBM-586 are within the required range again, the HBM586 will automatically reconnect to the handset.
- If the headset and handset do not automatically reconnect when they are back
within the required range, briefl y press the MFB on the HBM-586 to reconnect
manually.
- While trying to reconnect, your headset will beep and the LED indicator will fl icker
twice every 5 seconds.
Volume control
- Press the VOLUME button to adjust the speaker volume.
- There are eight levels of speaker volume.
each time the volume button is pressed. When the headset reaches the
maximum volume level, the next press of the button returns the headset to the
lowest volume level.
f (either accidentally or intentionally) while connected
The volume will increase one level,
How to use
ENG
Page 5
How to use
Calling
ENG
Answering a call
- When there is an incoming call, the headset will ring.
y press the MFB to answer the incoming call.
- Briefl
Making a call
- If you make a call from the handset, the call will (depending on the phone settings)
automatically transfer to the headset. If the call is not automatically transferred,
you can manually transfer the call by briefl y pressing the MFB on the HBM-586
(handset and headset must be paired).
Voice dialing*
- Briefl y press the MFB to activate “Voice Command”.
For best results, record the Voice dialing tag through your headset.
NOTE: If your handset does not support Voice dialing, this action may activate Last
Number Redial.
Last number redial*
- Press and hold the MFB for 1 second to activate “Last number redial”.
The headset will beep and then call the last number dialed.
Ending a call
- Briefl y press the MFB.
Transferring a call*
- While on a call on your handset, briefl y press the MFB to transfer the audio to the
headset (the headset and handset must be paired).
- To transfer a call from the headset to handset, press and hold the VOLUME button
for 3 seconds.
Call waiting*
- Answer a second call without hanging up the fi rst call by pressing the MFB for
1second. Press the MFB for 1second to return to the original call.
- Briefl y press the MFB to terminate both calls at once.
8 9
Call Reject*
- Activate call reject by pressing the MFB for 1 second when the handset rings.
* These functions may only be used if your handset supports them. For further
information about using these features, please consult your handset’s user manual.
Advanced multipoint
The LG HBM-586 is capable of having two handsets connected to the headset at the
This will give you the freedom of having only one headset to operate both
same time.
of your handsets.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing
instructions on pages 6).
- Turn off the headset.
- With the power off, press and hold the MFB on the HBM-586 for 6 seconds to enter
Manual Pairing mode.
- Now, pair and connect the headset with your other Bluetooth-enabled handset.
(This will be your primary handset).
- Once this handset is paired and connected, go back and connect the fi rst paired
handset to the headset. (This will be your secondary handset).
* NOTE: When the HBM-586 is connected to two handsets at the same
time(multipoint), the headset calling functions will work with the primary
handset (or handset which made the last outgoing call).
Calling function
- Voice dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
- The fi rst connected device is set as the primary handset and the next connected
device is set as the secondary handset.
- The device which made the last outgoing call will always be set as the primary
handset.
- If there is an incoming call on each handset, the fi rst incoming call can be answered
by a brief press of the MFB.
How to use
ENG
Page 6
How to use
Audio Streaming (A2DP)
ENG
The HBM-586 supports music streaming (A2DP).
When you play music from your Bluetooth Enabled Device, it will automatically
transfer to your headset. Music will automatically pause when you have an incoming
call. When the call is ended the music will start playing again.
A2DP allows streaming of all audio from your handset and running applications
Including Music and GPS Navigation.
SMS Reader
The HBM-586 Bluetooth Headset supports SMS reading on Android
devices.
TM
In the Android
device to use this function.
* The 2D barcode shown below helps you download the BTReaderTM application
Marketplace search for the LG “BT Reader” app and install on your
from Android MarketTM.
TM
based
10 11
Function
Power on Power off Press the MFB for 3 seconds.
Power off Power on Press the MFB for 4 seconds.
Volume up Talking Briefl y press the VOLUME button.
Volume down Talking
Transferring a call Talking
Answering a call Ringing Briefl y press the MFB.
Ending a call Talking Briefl y press the MFB.
Call waiting Talking Press the MFB for 1 second.
Last number redial Idle Press the MFB for 1 second.
Voice dialing
(handset must
support)
Call reject Ringing Press the MFB for 1 second.
Pairing mode
(Manual)
Battery status check
HBM-586 Status
Idle Briefl y press the MFB.
Power off Press the MFB for 6 seconds.
Idle
Summary of button functions
Action
Briefl y press the VOLUME DOWN button.
- Handset to headset
Briefl y press the MFB (must be paired)
- Headset to handset
Press and hold the VOLUME button for 3
seconds.
Press the VOLUME button for 3 seconds.
ENG
Page 7
LED indication
Function HBM-586 Status Action
ENG
Power on The white LED light fl ickers 4 times.
Power off
Pairing mode The white LED light stays on.
Headset / Hands-free
profi le connected
Operating
Call connected The white LED light fl ickers twice every 5 seconds.
Out of range
Charging The white LED light stays on.
Charging
Charging complete
The white LED light fl ickers 4 times and then turns off.
The white LED light fl ickers twice every 5 seconds.
For 15 minutes since linkloss occurred, the white
LED light fl ickers twice every 5 seconds.
After 15 minutes, the white LED light fl ickers once
every 5 seconds.
The LED light turns off.
Troubleshooting
Issue Possible problem Resolution
Does not turn on
Unable to
communicate with
the LG Bluetooth
Headset HBM-586
Unable to pair the
HBM-586 with the
Bluetooth
Low sound (speaker) Check the speaker volume. lncrease the volume level.
12 13
Check whether the battery of
the HBM-586 is fully charged.
Check whether the handset
supports the headset or
hands-free Bluetooth profi les
®
Check whether the battery of
the HBM-586 is low.
Check and make sure the
headset is on.
®
Check and make sure the
device
headset is placed in pairing
mode.
Charge the battery.
Determine whether your handset
supports the headset or handsfree Bluetooth profi les.
Charge the battery.
Press and hold the MFB for at
least 3 seconds to turn on the
headset.
With the power off, press and
hold the MFB for 6 seconds to
manually place the headset in
pairing mode.
ITEM Description
®
specifi cation
Bluetooth
Battery
Talk Time Up to 5 Hrs
Stand by time Up to 200 Hrs
Charging time < 2 hours
Operation temperature -10°C ~ 50°C
Dimension / weight
V3.0 (Headset / Hands-Free / A2DP Profi les)
3.7V, Li- Polymer, 60mAh
Headset : 15mm(W) X 61.5mm(L) X 3.8mm(H) / 7.2g
Cradle : 30.6mm(W) X 38.7mm(L) X 9.2mm(H) / 16.8g
Do not drop the device.
Do not modify, repair, or disassemble.
Do not expose directly to water, alcohol, benzene, etc. for cleaning.
Do not expose directly to fl ammables.
Do not place or keep the device near fl ammables.
Keep the device away from humidity and dust.
Do not place heavy objects on the device.
Only use the headset with an original LG charger, otherwise the it may be
damaged.
• Changes or modifi cations not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• There is a risk of explosion if the battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• The earloop is made of a durable plastic.
However, bending the earloop repeatedly is not recommended.
Specifi cation
Precautions
ENG
Page 8
Declaration of Confi rmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC rules.
ENG
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change to
the antenna or the device is permitted. Any change to the antenna or the device
could result in the device exceeding the RF exposure requirements and void user’s
authority to operate the device.
CE NOTICE TO USERS:
Hereby, LG Electronics Inc. declares that this HBM-586 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Additional Information
1. Radio frequency exposure
®
This Bluetooth
When in operation it communicates with a Bluetooth
receiving and transmitting radio frequency (RF) electromagnetic fi elds (microwaves)
in the frequency range 2.4 to 2.4835 GHz. The output power of the radio transmitter
is . Your Bluetooth® Headset is designed to operate in compliance
with the RF exposure guidelines and limits set by national authorities and
international health agencies when used any compatible LG Electronics mobile
phone.
14 15
Headset HBM-586, is a radio transmitter and receiver.
®
equipped mobile device by
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. Although this is uncommon, your electronic device could generate
sparks. Sparks in such areas could cause an explosion or fi re resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often, but
not always, clearly marked.
3.Emergency calls
IMPORTANT!
This Bluetooth
operate using radio signals, mobile and landline networks as well as user programmed functions, which cannot guarantee connection under all conditions.
Therefore you should never rely solely upon any electronic device for essential
communications (e.g.medical emergencies). Remember, in order to make or
receive calls, the headset and the electronic device connected to the headset
must be switched on and in a service area with adequate mobile signal strength.
Emergency calls may not be possible on all mobile phone networks or when
certain network services and/or phone features are in use. Check with your local
service provider.
4. Battery information
A rechargeable battery has a long service life if treated properly. A new battery
or one that has not been used for a long period of time could have reduced
capacity the fi rst few times it is used. Do not expose the battery to extreme
temperatures, never above +60°C(+140°F) or under -20°C(-4°F). For maximum
battery capacity, use the battery at room temperature. If the battery is used in
low temperatures, the battery capacity will be reduced. The battery can only be
charged in temperatures between +10°C(+50°F) and +45°C (+113°F). For your
safety, do not remove the battery incorperated in the product. If you need to
replace the battery, take it to the nearest authorised LG Electronics service point
or dealer for assistance.
5. Recycling the battery in your Bluetooth
The battery in your Bluetooth® Headset must be disposed of properly and should
never be placed in municipal waste. The LG Electronics service partner who
removes the battery will dispose of it according to local regulations.
®
headset and the electronic device connected to the headset
Additional Information
®
headset
ENG
Page 9
Additional Information
6. Conditions
- The warranty is valid only if the original receipt issued to the original purchaser by
ENG
the dealer, specifying the date of purchase and serial number, is presented with
the product to be repaired or replaced.
LG Electronics reserves the right to refuse warranty service if this information
has been removed or changed after the original purchase of the product from
the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced product
shall be warranted for the remaining time of the original warranty period or for
ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the property of
LG Electronics.
- This Warranty does not cover any failure of the product due to normal wear and
tear, or due to misuse, including but not limited to use in other than the normal
and customary manner, in accordance with instructions for use and maintenance
of the product. Nor does this warranty cover any failure of the product due to
accident, modifi cation or adjustment, acts of God or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair installations,
modifi cations or service performed by a non- LG Electronics authorised person.
Tampering with any of the seals on the product will void the warranty.
- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS
OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
• Some countries/states do not allow the exclusion or limitation of incidental or
consequential damages, or limitation of the duration of implied warranties, so
the preceding limitations or exclusions may not apply to you. The warranty
provided does not affect the consumer’s statutory rights under applicable national
legislation in force, nor the consumer’s rights against the dealer arising from their
sales/purchase contract.
16 17
Subject to the conditions of this Limited Warranty, LG Electronics warrants this
product to be free from defects in design, material and workmanship at the time of
its original purchase by a consumer, and for a subsequent period of one (1) year.
Should your product need warranty service, please return it to the dealer from
whom it was purchased or contact your local LG Electronics contact centre to get
further information.
Important safety information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume. Set
the volume to a safe level. Over time you can become accustomed to a higher
volume that may sound normal but can be damaging to your hearing. If you
experience ringing in your ears or muffl ed speech, stop listening and have your
hearing checked. The louder the volume, the less time is required before your
hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.
Using Headsets safely
Use of headsets to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive whilst driving. Stop using this
device if you fi nd it disruptive or distracting whilst operating any type of vehicle or
performing any other activity that requires your full attention.
Limited warranty
ENG
Loading...