LG HBM230 User Manual
Rev 1.0 US
All rights reserved.
LG Electronics Inc., 2010
Note: For optimal performance and to prevent
any damage to, or misuse of the HBM-230,
please read all the information carefully
before using the HBM-230
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
LG Electronics
BLUETOOTH®Mono Headset
HBM-230 User manual
English
3
Introduction
The LG Bluetooth®Headset HBM-230 is a lightweight wireless
headset that uses Bluetooth
®
technology.
This product can be used as an audio accessory for devices
that support the headset or hands-free Bluetooth
®
profiles.
Included in the package
2
Table of Contents
LG HBM-230
Bluetooth
®
Headset
User manual
Warranty Card
Introduction 3
- Included in the package 3
Description of parts 4
How to use 4
- Change direction 4
- Charging 5
- Low battery 5
- Battery status check 5
- Power on 5
- Power off 5
- Pairing 5
•Easy pairing 5
•Manual pairing 6
- Auto reconnect 7
- Volume control 7
- Calling 7
•Answering a call 7
•Making a call 7
•Voice dialing 8
•Last number redial 8
•Ending a call 8
•Transferring a call 8
•Call waiting 8
•Call Reject 8
- Advanced multipoint 9
Summary of button functions 10
LED indication 10
Troubleshooting 11
Specification 11
Precautions 12
Declaration of confirmation 13
Additional information 13
Limited warranty 16
Important safety information 16
Ear loop
Charger
4
Description of parts
Headset
MFB
(Multi-Function Button)
How to use
Change direction
Left Right
Volume UP /
Down Button
Charging Port
LED Indicator
Speaker
5
Charging
Low battery
Battery status check
Power on
- When the charger is connected, with power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid white light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.
Pairing
Power off
- Press and hold the MFB for 3 seconds.
•A shutdown tone will play, the Bluetooth link will be disconnected and the power
will turn off.
How to use
- A low battery tone will play once every 30 seconds.
- If the battery is not charged, the headset will turn off.
- Press and hold the VOLUME DOWN button for 3 seconds.
- There are 3 levels of battery status : "Battery high","Battery medium","Battery low"
- Press and hold the MFB for 3 seconds.
•The power will turn on and a startup tone will play.
- Before using the headset for the first time, it must be paired with a Bluetoothenabled handset.
- There are 2 pairing modes with the HBM-230.
1) Easy Pairing
•Press and hold the MFB for 3 seconds to turn on the HBM-230.
•The headset will enter auto-reconnect mode for 10 seconds.
(if your headset has already been paired with the handset, the headset will
automatically reconnect to the handset when the HBM-230 is powered on).
Battery status High Medium Low
Number of white LED flashes 10 Flashes 5 Flashes 1 Flash
Loading...