LG HB905TA-D0 User guide

<![if ! IE]>

<![endif]>ENGLISH

OWNER’S MANUAL

Network Blu-ray Disc™ /

DVD Home Cinema System

Please read this manual carefully before operating your set and retain it for future reference.

MODEL

HB905TA (HB905TA, SB95TA-F/S/C/W)

P/NO : MFL63740499

HB905TA-D0.BTURLLK_ENG_0499.indd1 1

2010.4.13 1:49:56 PM

HB905TA-D0.BTURLLK_ENG_0499.indd2 2

2010.4.13 1:50:0 PM

Safety Information

3

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

Cautions and Warnings

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confi ned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s instruction has been adhered to.

CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service Center.

Use of controls, adjustments or the performance of procedures other than those specifi ed herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

1 SafetyInformation

HB905TA-D0.BTURLLK_ENG_0499.indd3 3

2010.4.13 1:50:0 PM

4Safety Information

1 SafetyInformation

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specifi cation page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fi re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service Center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

This device is equipped with a portable battery or accumulator.

Safety way to remove the battery or the battery from the equipment: Remove the old battery

or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free

reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fi re or the like.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.

Disposal of your old appliance

1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

2.All electrical and electronic products shall be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

LG Electronics hereby declares that this/ these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC.

European representative :

LG Electronics Service Europe B.V. Veluwezoom 15, 1327

AE Almere. The Netherlands (Tel : +31-(0)36-547-8888)

HB905TA-D0.BTURLLK_ENG_0499.indd4 4

2010.4.13 1:50:0 PM

Safety Information

5

Notes on Copyrights

Because AACS (Advanced Access Content System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.

Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for BD format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark,

BD+, or this product, please contact an authorized Customer Service Center.

Many BD-ROM/DVD discs are encoded with copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for

home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programmes, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/or criminal liability.

Important Notice for TV Color system

The Color system of this player differs according to currently playing discs.

For example, when the player plays the disc recorded in the NTSC Color system, the image is outputted as a NTSC signal.

Only the multi system Color TV can receive all signals outputted from the player.

If you have a PAL Color system TV, you will see just distorted images when using discs or video contents recorded in NTSC.

The multi system Color TV changes the Color system automatically according to input signals. In case that the Color system is not changed automatically, turn it off and then on to see normal images on screen.

Even if the disc recorded in NTSC Color system are well displayed on your TV, these may not be recorded correctly on your recorder.

1 SafetyInformation

HB905TA-D0.BTURLLK_ENG_0499.indd5 5

2010.4.13 1:50:1 PM

6

Contents

1

Safety Information

3Cautions and Warnings

2

Preparation

8Introduction

8About the “” Symbol Display

8Symbols Used in this Manual

9Supplied Accessories

9Playable Discs

11File compatibility

12Regional Code

12AVCHD (Advanced Video Codec High Definition)

12Certain System Requirements

12Compatibility Notes

13Remote control

14Front panel

15Rear panel

3

Installation

16Assemble the speakers

17Speaker Connection

17Attaching the speakers to the player

18Positioning the system

19Connecting to Your TV

19HDMI Connection

20What is SIMPLINK?

21Component Video Connection

21Video Connection

22Resolution Setting

23Antenna connection

23 Connections with external device

23AUX Connection

24PORT. IN connection

24OPTICAL IN 1/2 connection

25Connecting to your Home Network

25Wired network connection

26Wired Network Setup

28

USB device connection

30

Settings

30

Adjust the Setup Settings

30

[DISPLAY] Menu

32

[LANGUAGE] Menu

32[AUDIO] Menu

33[LOCK] Menu

34[NETWORK] Menu

35[OTHERS] Menu

36Sound Effect

HB905TA-D0.BTURLLK_ENG_0499.indd6 6

2010.4.13 1:50:1 PM

4

 

7

 

Operation

Appendix

 

 

 

 

 

38

General Playback

75

Controlling a TV with the Supplied

40

Advanced Playback

 

 

Remote Control

76

Area Code List

43

On-Screen display

77

Language code List

46

Enjoying BD-LIVE

78

Network Software Update

47

Playing movie file and VR discs

78

Network update notification

49

Viewing a photo

78

Software Update

51

Listening to music

80

Video output resolution

54

Playing the iPod

81

Trademarks and Licences

56

Radio Operations

83

Specifications

57

Playing content via your home

 

 

 

 

network

85

Important Information Relating to

62

Using NetCastTM Entertainment

 

 

Network Services

 

Access

86

Open source software notice

62

YouTube

87

Gracenote® End User Licence

66

Picasa Web Albums

 

 

Agreement

 

 

 

69

Using the AccuWeather

 

 

 

7

1

2

3

4

5

 

5

 

 

Maintenance

 

71

Notes on Discs

 

71

Handling the Unit

6

6

 

 

Troubleshooting

7

 

72General

73Picture

73

Sound

 

74

Network

8

HB905TA-D0.BTURLLK_ENG_0499.indd7 7

2010.4.13 1:50:1 PM

8Preparation

2 Preparation

2Introduction

<![if ! IE]>

<![endif]>Preparation

About the “ ” Symbol Display

 

” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specifi c media.

Symbols Used in this Manual

NOTE

Indicates special notes and operating features.

CAUTION

Indicate cautions for preventing possible damages from abuse.

A section whose title has one of the following symbols are applicable only to the disc represented by the symbol.

 

BD

BD-ROM disc

 

 

 

 

 

 

 

DVD-Video, DVD±R/RW in

 

DVD

Video mode or VR mode

 

 

 

and fi nalized

 

 

 

 

 

 

 

DVD±R/RW in AVCHD

 

AVCHD

 

 

 

format

 

 

 

 

 

 

 

 

 

 

 

 

ACD

Audio CDs

 

 

 

 

 

 

 

 

 

MOVIE

Movie fi les

 

 

 

 

 

 

 

 

 

MUSIC

Music fi les

 

 

 

 

 

 

 

 

PHOTO

Photo fi les

 

 

 

 

HB905TA-D0.BTURLLK_ENG_0499.indd8 8

2010.4.13 1:50:2 PM

Preparation 9

Supplied Accessories

Video cable (1)

Color-coded Speaker

 

Cables (6)

Remote control (1)

Batteries (2)

FM antenna (1)

Nero MediaHome4

 

Essentials software

 

CD-ROM (1)

HDMI cable (1)

Playable Discs

Blu-ray Disc

- Discs such as movies that can be purchased or rented.

-BD-R/RE discs that contain Movie, Music or Photo fi les.

DVD-VIDEO 8 / 12 cm disc

Discs such as movies that can be purchased or rented.

DVD±R

8 / 12 cm disc

-Video mode and fi nalized only

-Supports the dual layer disc also

-Finalized AVCHD format

-DVD±R discs that contain Movie, Music or Photo fi les

DVD-RW

8 / 12 cm disc

-VR mode, Video mode and fi nalized only

-Finalized AVCHD format

-DVD-RW discs that contain Movie, Music or Photo fi les.

DVD+RW

8 / 12 cm disc

-Video mode and fi nalized only

-AVCHD format

-Finalized AVCHD format

-DVD+RW discs that contain Movie, Music or Photo fi les.

Audio CD

8 / 12 cm disc

CD-R/RW

8 / 12 cm disc

- CD-R/RW discs that contain audio titles, Movie, Music or Photo fi les.

2

<![if ! IE]>

<![endif]>Preparation

HB905TA-D0.BTURLLK_ENG_0499.indd9 9

2010.4.13 1:50:2 PM

10

2

<![if ! IE]>

<![endif]>Preparation

Preparation

NOTE

Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

Depending on the recording software & the fi nalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.

BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

This player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality.

Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA fi les) and these

require certain pre-existing conditions to ensure compatible playback.

Customers should note that permission is required in order to download MP3 / WMA fi les and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)

HB905TA-D0.BTURLLK_ENG_0499.indd10 10

2010.4.13 1:50:3 PM

Preparation 11

File compatibility

Overall

Available File extensions:

“.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”, “

.mkv”, “.mp4”, “.mp3”, “.wma”, “.wav”

Available fi le extensions differ depending on the DLNA servers.

Some “.wav” fi les are not supported on this player.

The fi le name is limited to 180 characters.

Depending on the size and number of the fi les, it may take several minutes to read the contents on the media.

Maximum Files/Folder: Less than 2 000 (total number of fi les and folders)

CD-R/RW, DVD±R/RW, BD-R/RE Format:

ISO 9660+JOLIET, UDF and UDF Bridge format

MOVIE

Available resolution size:

1 920 x 1 080 (W x H) pixels

Playable subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)

VobSub (.sub) is not available in the [Home Link] feature.

Playable Codec format: “DIVX3.xx”, “DIVX4. xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard playback only), H.264/MPEG-4 AVC, MPEG1 SS, MPEG2 PS, MPEG2 TS

Playable Audio format: “Dolby Digital”, “DTS”, “MP3”, “WMA”, “AAC”, “AC3”

Not all the WMA and AAC Audio formats is compatible with this unit.

Sampling frequency:

between 32 kHz to 48 kHz (WMA), between 16 kHz to 48 kHz (MP3)

Bit rate:

between 20 kbps to 320 kbps (WMA), between 32 kbps to 320 kbps (MP3)

NOTE

HD movie fi les contained on the CD or USB 1.0/1.1 may not played properly. BD, DVD or USB 2.0 are recommended to play back HD movie

fi les.

This player supports H.264/MPEG-4 AVC profile Main, High at Level 4.1. For a fi le with higher level, the warning message will appear on the screen.

This player does not support the fi les that are recorded with GMC*1 or Qpel*2. Those are video encoding techniques in MPEG4 standard, like DivX or XVID have.

*1 GMC – Global Motion Compensation

*2 Qpel – Quarter pixel

MUSIC

Sampling frequency:

between 8 kHz to 48 KHz (WMA), between 11 kHz to 48 kHz (MP3)

Bit rate:

between 8 kbps to 320 kbps (WMA, MP3),

NOTE

This unit cannot support the ID3 Tag embedded MP3 fi le.

The total playback time indicated on the screen may not correct for VBR fi les.

PHOTO

Recommended size:

Less than 4,000 x 3,000 x 24 bit/pixel Less than 3,000 x 3,000 x 32 bit/pixel

Progressive and lossless compression photo image fi les are not supported.

2

<![if ! IE]>

<![endif]>Preparation

HB905TA-D0.BTURLLK_ENG_0499.indd11 11

2010.4.13 1:50:3 PM

12 Preparation

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.

2

AVCHD (Advanced Video Codec

High Definition)

<![if ! IE]>

<![endif]>Preparation

• The AVCHD format is a high defi nition

 

• This player can playback AVCHD format

 

discs. These discs are normally recorded and

 

used in camcorders.

 

digital video camera format.

 

• The MPEG-4 AVC/H.264 format is capable

 

of compressing images at higher efficiency

 

than that of the conventional image

 

compressing format.

 

• Some AVCHD discs use the “x.v.Color”

 

format.

 

• This player can playback AVCHD discs using

 

“x.v.Color” format.

 

• Some AVCHD format discs may not play,

 

depending on the recording condition.

 

• AVCHD format discs need to be fi nalized.

 

• “x.v.Color” offers a wider Color range than

 

normal DVD camcorder discs.

Certain System Requirements

For high defi nition video playback:

High defi nition display that has COMPONENT or HDMI input jacks.

BD-ROM disc with high defi nition content.

HDMI or HDCP capable DVI input on your display device is required for some content (as specifi ed by disc authors).

For up-conversion of standard defi nition DVD, a HDMI or HDCP capable DVI input on your display device is required for copy protected content.

Compatibility Notes

Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you

experience compatibility problems, please contact an authorized Customer Service Center.

Viewing high-defi nition content and upconverting standard DVD content may require a HDMI-capable input or HDCPcapable DVI input on your display device.

Some BD-ROM and DVD discs may restrict the use of some operation commands or features.

You can use a USB device that is used to store some disc related information,

including downloaded on-line content. The disc you are using will control how long this information is retained.

HB905TA-D0.BTURLLK_ENG_0499.indd12 12

2010.4.13 1:50:4 PM

Preparation 13

Remote control

1

2

3

4

Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert two R03 (size AAA) batteries with andmatched correctly.

• • • • • • •a • • • • • •

1 (POWER): Switches the player ON or OFF.

Z OPEN/CLOSE: Opens and closes the disc tray.

RADIO&INPUT: Changes input mode.

0-9 numerical buttons: Selects numbered options in a menu.

CLEAR: Removes a mark on the search menu or a number when setting the password.

REPEAT: Repeats a desired section or sequence.

• • • • • • •b • • • • • •

m/M SCAN: Searches backward or forward.

./> SKIP: Goes to the next or previous chapter / track / fi le.

x (STOP): Stops playback.

B (PLAY): Starts playback.

X (PAUSE): Pauses playback

SPEAKER LEVEL: Sets the sound level of desired speaker.

SOUND EFFECT: Selects a sound effect mode.

VOL +/- : Adjusts speaker volume.

OPTICAL: Changes input mode to optical directly.

MUTE: Mute the unit.

• • • • • • •c • • • • • •

HOME: Displays or exits the [Home Menu].

MUSIC ID: When connected to the network, can provide information about the current song while movie playback.

INFO/DISPLAY: Displays or exits On-Screen Display.

Direction buttons: Selects an option in the menu.

ENTER: Acknowledges menu selection.

O RETURN: Exits the menu or resumes playback.

TITLE/POPUP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available.

DISC MENU: Accesses menu on a disc.

• • • • • • •d • • • • • •

Colored (R, G, Y, B) buttons: Use to navigate on menus.

RDS: Radio Data System.

PTY: Views the programme type of the RDS.

PTY SEARCH:

Searches programme type.

MONO/STEREO: Selects mono/ stereo in FM mode.

MARKER: Marks any point during playback.

SEARCH: Displays or exits the search menu.

SLEEP: Sets a certain period of time after which the unit will switch to off.

z REC: Records an audio CD.

TV Control Buttons: See page 75.

2

<![if ! IE]>

<![endif]>Preparation

HB905TA-D0.BTURLLK_ENG_0499.indd13 13

2010.4.13 1:50:4 PM

14 Preparation

Front panel

 

1

2

3

4

5

6

2

 

 

 

 

 

 

<![if ! IE]>

<![endif]>Preparation

7

8

 

 

 

9

 

 

 

 

a 1/\ (POWER) Button

b Disc Tray

c iPod Dock

d Remote sensor

e Display window

f Volume control

g PORT. IN

h USB Port

iOperation buttons

Z (OPEN/CLOSE) B/X (PLAY / PAUSE) x (STOP)

./> (SKIP) F (Function)

Changes the input source or function.

HB905TA-D0.BTURLLK_ENG_0499.indd14 14

2010.4.13 1:50:7 PM

Preparation 15

Rear panel

1

2

3

4

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

aAC Power cord

Plug into the power source.

b Speakers connectors

c Cooling Fan

d Antenna Connector

e VIDEO OUT

f AUX (L/R) INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

7

8

9

10

 

 

gCOMPONENT VIDEO (Y PB PR) OUTPUT (PROGRESSIVE SCAN)

h OPTICAL IN 1(TV) / 2

iHDMI OUT (type A, Version 1.3) Connect to TV with HDMI inputs.

j LAN port

2

<![if ! IE]>

<![endif]>Preparation

HB905TA-D0.BTURLLK_ENG_0499.indd15 15

2010.4.13 1:50:7 PM

16 Installation

3 Installation

3

<![if ! IE]>

<![endif]>Installation

Assemble the speakers

Preparation

Speaker

Stand

Cable

Attach the speaker to the stand, then secure the connection with a supplied screw. Draw the speaker wire through the inside of the stand and also through the hole on the bottom of the speaker.

CAUTION

Be careful that the speaker should not fall down. Otherwise it may result in the speaker malfunctioning and causing personal injury and/ or property damage.

HB905TA-D0.BTURLLK_ENG_0499.indd16 16

2010.4.13 1:50:7 PM

Installation

Speaker Connection

Attaching the speakers to the player

1.Connect speaker wires to the main unit. Each speaker wire is Color-coded. Use matching Color wires for corresponding speakers.

Color

Speaker

Position

Grey

Rear

Rear right

 

 

 

Blue

Rear

Rear left

 

 

 

Green

Center

Center

 

 

 

Orange

Sub

Any front position

 

woofer

 

 

 

 

Red

Front

Front right

 

 

 

White

Front

Front left

 

 

 

2.Connect the speaker wire to the terminal on the speaker.

Make sure the wire marked black goes in to the terminal marked “–” (minus) and the other wire goes in to the terminal marked “+” (plus).

CAUTION

Be careful to make sure children not to put their hands or any objects into the *speaker duct. *Speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure).

Place the Center speaker at a safe distance from the child’s reach.

Otherwise it may result in the speaker falling down and causing personal injury and/or property damage.

The speakers contain magnet parts, so color irregularity may occur on the TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen.

17

3

<![if ! IE]>

<![endif]>Installation

HB905TA-D0.BTURLLK_ENG_0499.indd17 17

2010.4.13 1:50:8 PM

18 Installation

3

<![if ! IE]>

<![endif]>Installation

Positioning the system

The following illustration shows an example of positioning the system. Note that the

illustrations in these instructions differ from the actual unit for explanation purposes.

For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A).

B

C

A G

F

AA

A

A E

DA

AFront left speaker (L)/ BFront right speaker (R):

Place the front speakers to the sides of the monitor or screen and as fl ush with the screen surface as possible.

CCenter speaker:

Place the Center speaker above or below the monitor or screen.

DSurround left speaker (L)/ ESurround right speaker (R):

Place these speakers behind your listening position, facing slightly inwards.

FSubwoofer:

The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the Center of the room to reduce the wall refl ections.

G Unit

HB905TA-D0.BTURLLK_ENG_0499.indd18 18

2010.4.13 1:50:8 PM

Installation 19

Connecting to Your TV HDMI Connection

Make one of the following connections, depending on the capabilities of your existing equipment.

HDMI connection (pages 19-20)

Component Video connection (page 21)

Video connection (page 21)

NOTE

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual.

Please refer to the manuals of your TV, stereo system or other devices as necessary to make the best connections.

Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel.

Do not connect your player via your VCR. The image could be distorted by the copy protection system.

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI

cable(Type A, Version 1.3). Connect the HDMI OUT jack on the player to the HDMI IN jack on a HDMI compatible TV or monitor.

HDMI Connection

Player

3

<![if ! IE]>

<![endif]>Installation

TV

TV

Set the TV’s source to HDMI (refer to TV’s

Owner’s manual).

HB905TA-D0.BTURLLK_ENG_0499.indd19 19

2010.4.13 1:50:9 PM

20 Installation

3

<![if ! IE]>

<![endif]>Installation

NOTE

Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.

When the HDMI connection with HDCP is not verifi ed, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.

If there is noise or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m and use a high speed HDMI cable (version 1.3).

If a connected HDMI device does not accept the audio output of the player, the HDMI

device’s audio sound may be distorted or may not output.

When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 22.)

Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 31).

When you connect a HDMI or DVI compatible device make sure of the following:

-Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input.

Not all HDCP-compatible HDMI or DVI devices will work with this player.

-The picture will not be displayed properly with non-HDCP device.

-This player does not playback and TV screen is changed to black screen.

What is SIMPLINK?

Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc.

Refer to the TV owner’s manual for the details of SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as shown above.

NOTE

Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work.

When you use SIMPLINK function, you have to connect to the OPTICAL IN 1 jack to enjoy TV sound to your speaker system.

HB905TA-D0.BTURLLK_ENG_0499.indd20 20

2010.4.13 1:50:9 PM

LG HB905TA-D0 User guide

Installation 21

Component Video Connection

Video Connection

Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using Y Pb Pr cables. You can hear the sound the through the system’s speaker.

Component Connection

Player

Green

Green

Blue

Red

TVTV

NOTE

When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 22.)

Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers.

Video Connection

 

Player

 

Player

 

 

3

Yellow

<![if ! IE]>

<![endif]>Installation

TVTV

 

HB905TA-D0.BTURLLK_ENG_0499.indd21 21

2010.4.13 1:50:10 PM

22 Installation

3

<![if ! IE]>

<![endif]>Installation

Resolution Setting

The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu.

1.Press HOME ().

2.Use I/i to select the [Setup] and press ENTER (). The [Setup] menu appears.

3.Use U/u to select [DISPLAY] option then press i to move to the second level.

4.Use U/u to select the [Resolution] option

then press ENTER () or i to move to the third level.

5.Use U/u to select the desired resolution

then press ENTER () to confi rm your selection.

NOTE

If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows:

1.Press Z to open the disc tray.

2.Press x for more than 5 seconds.

Since several factors affect the resolution of video output, see “Video Output Resolution” on page 80.

HB905TA-D0.BTURLLK_ENG_0499.indd22 22

2010.4.13 1:50:10 PM

Installation 23

Antenna connection

Connections with

 

external device

Connect the supplied antenna for listening to the radio.

Antenna Connection

Player

NOTE

After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.

AUX Connection

You can enjoy the sound of your component with the analogue audio output jacks from the speakers of the system.

Connect the analogue audio output jacks of your component into the AUX L/R (INPUT) on this unit. And then select the [AUX] option by pressing RADIO&INPUT and ENTER ().

You can also use F button on the front panel to select the input mode.

AUX Connection

Player

Red

White

To the audio output jacks

To the audio output jacks

of your component

of your component

(TV, VCR, etc.)

(TV, VCR, etc.)

3

<![if ! IE]>

<![endif]>Installation

HB905TA-D0.BTURLLK_ENG_0499.indd23 23

2010.4.13 1:50:10 PM

24 Installation

PORT. IN connection

You can enjoy the sound of your portable audio player from the speakers of the system.

Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN of this unit. And then select the [PORTABLE] option by pressing RADIO&INPUT and ENTER ().

You can also use F button on the front panel to select the input mode.

3

PORT.IN Connection

<![if ! IE]>

<![endif]>Installation

 

 

twZG SG UUU

OPTICAL IN 1/2

connection

You can enjoy the sound of your component with the digital optical connection from the speakers of the system.

Connect the optical output jack of your component into the OPTICAL IN 1/2 jacks on the unit. And then select the [OPTICAL 1/2] option by pressing RADIO&INPUT and ENTER (). Or press OPTICAL to select directly.

You can also use F button on the front panel to select the input mode.

Optical Connection

To the digital

To the digital opticaloutputjackjack ofofyourcomponent

HB905TA-D0.BTURLLK_ENG_0499.indd24 24

2010.4.13 1:50:11 PM

 

 

Installation

25

Connecting to your

Wired Network Connection

 

Home Network

Router

 

 

 

 

 

This player can be connected to a local area

 

Broadband

 

 

Service

 

network (LAN) via the LAN port on the rear

 

Service

 

 

 

 

panel.

WAN

 

 

 

 

 

By connecting the unit to a broadband home

 

 

 

network, you have access to services such

LAN 1

PC

 

as software updates, Home Link, BD-LIVE

 

 

 

interactivity and streaming services.

LAN 2

PC

 

 

 

 

 

LAN 3

 

3

Wired network connection

 

 

<![if ! IE]>

<![endif]>Installation

connect directly to the network and are not

 

 

Using a wired network provides the best

 

 

 

performance, because the attached devices

 

 

 

subject to radio frequency interference.

 

 

 

Please refer to the documentation for your

 

 

 

network device for further instructions.

 

 

 

Connect the player’s LAN port to the

 

 

 

corresponding port on your Modem or Router

 

 

 

using a commercially available LAN or Ethernet

 

PlayerPlayer

 

cable (CAT5 or better with RJ45 connector).

 

 

 

 

 

In the example confi guration for wired

 

 

 

connection below, this player would be able to

NOTE

 

 

access content from either of the PCs.

 

 

 

When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.

Do not connect a modular phone cable to the LAN port.

Since there are various connection

confi gurations, please follow the specifi cations of your telecommunication carrier or internet service provider.

If you want to access content from PCs or DLNA servers, this player must be connected to the same local area network with them via a router.

HB905TA-D0.BTURLLK_ENG_0499.indd25 25

2010.4.13 1:50:11 PM

26 Installation

 

Wired Network Setup

 

Before setting the wired network, you need to

 

connect the broadband internet to your home

 

network.

 

If there is a DHCP server on the local area

 

network (LAN) via wired connection, this player

 

will automatically be allocated an IP address.

 

After making the physical connection, a small

 

number of home networks may require the

 

player’s network setting to be adjusted. Adjust

 

the [NETWORK] setting as follows.

 

1. Select [Connection Setting] option in the

3

[Setup] menu then press ENTER ( ).

<![if ! IE]>

<![endif]>Installation

 

 

 

 

 

 

 

 

 

NOTE

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set the [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using U/u/I/i and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.

3.Select [OK] and press ENTER () to apply network settings.

4.The player will ask you to test the network connection. Select [OK] and press ENTER () to complete the network connection.

2.Use U/u/I/i to select the IP mode between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP address automatically.

5.If you select [Test] and press ENTER

() at step 4 above, the network connection status is displayed on the screen.

You can also test it on the

[Connection Status] in the [Setup] menu.

HB905TA-D0.BTURLLK_ENG_0499.indd26 26

2010.4.13 1:50:11 PM

Installation

Notes on Network Connection:

Many network connection problems during set up can often be fi xed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

Our company is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions

associated with your broadband internet connection, or other connected equipment.

The features of BD-ROM discs made available through the Internet Connection feature are not created or provided

by our company, and our company is not responsible for their functionality or continued availability. Some disc

related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc.

Some internet contents may require a higher bandwidth connection.

Even if the player is properly connected and confi gured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content.

Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection.

Any fees charged by an ISP including, without limitation, connection charges are your responsibility.

A 10 Base-T or 100 Base-TX LAN port is required for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.

You must use a Router to use xDSL service.

A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.)

The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

Turn off all unused network equipment in your local home network. Some devices may generate network traffic.

27

3

<![if ! IE]>

<![endif]>Installation

HB905TA-D0.BTURLLK_ENG_0499.indd27 27

2010.4.13 1:50:12 PM

Loading...
+ 61 hidden pages