LG GS73SGS Owner's Manual
ENGLISH
OWNER’S MANUAL
SIDE BY SIDE
REFRIGERATOR
Please read this owner’s manual thoroughly before
operating and keep it handy for reference at all times.
Model Name(*=color)
LSXS26326*
LSXS26366*
LSXS26466*
LSXS26386*
LSXC22326*
P/No. MFL67653437-12
G LSXS26336*S73SGS
G
S74SDS
GS73SDS
GS74SGS
GS73SDD
GS73SGG
LSXC22386*
LSXC22336*
Copyright © 2014 - 2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
2 TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3 PRODUCT FEATURES
4 IMPORTANT SAFETY
INSTRUCTIONS
7 COMPONENTS
7 Refrigerator Exterior
8 Refrigerator Interior
10 INSTALLATION
10 Installation Overview
10 Specifications
11 Unpacking Your Refrigerator
11 Choosing the Proper Location
11 - Flooring
12 - Ambient Temperature
12 - Measuring the Clearances
12 Removing/Assembling the Refrigerator
Door Handles
13 Removing/Assembling the Refrigerator
Doors
13 - Removing the Left (Freezer) Door
13 - Removing the Right (Refrigerator) Door
14 - Reinstalling the Right (Refrigerator) Door
14 - Reinstalling the Left (Freezer) Door
15 Connecting the Water Line
15 - Before You Begin
15 - Water Pressure
15 - What You Will Need
17 - Water Line Installation Instructions
18 Turning On the Power
19 Leveling
19 Door Alignment
20 HOW TO USE
20 Before Use
21 Control Panel
21 - Airflow
22 - Control Panel Features
24 Automatic Icemaker
24 - When You Should Turn the Icemaker O
24 - Normal Sounds You May Hear
24 - Preparing for Vacation
24 - Power Failure
26 Ice and Water Dispenser
27 Storing Food
27 - Food Preservation Location
29 - Food Storage Tips
29 - Storing Frozen Food
30 Detaching and Assembling the Storage Bins
32 Door-In-Door
33 Adjusting the Refrigerator Shelves
34 MAINTENANCE
34 Cleaning
35 Replacing the Water Filter
39 SMART DIAGNOSIS
39 Using Smart Diagnosis
TM
TM
40 TROUBLESHOOTING
40 Common Product Questions
41 Noises You Might Hear
42 Before Calling for Service
51 WARRANTY (USA)
53 WARRANTY (CANADA)
3PRODUCT FEATURES
PRODUCT FEATURES
* Depending on the model, some of the following functions may not be available.
DOOR-IN-DOOR REFRESHMENT CENTER
The Door-in-Door Refreshment Center provides a convenient area for
frequently-used items that require easy access.
FRESH ZONE DRAWERS
The Fresh Zone drawers are designed to help keep your fruits and
vegetables fresh.
DOOR ALARM
The Door Alarm function is designed to prevent refrigerator malfunctioning
that could occur if a refrigerator door remains open. If a refrigerator door
is left open for more than 60 seconds, a warning alarm SOUNDSAT
30 second intervals.
ENGLISH
AUTO CLOSING HINGE
The refrigerator doors close automatically with a slight push. (The door
only closes automatically when it is open at an angle less than 30°.)
ICE PLUS
Ice production can be increased by approximately 20 percent when the
freezer section is maintained at the coldest temperature for a 24-hour pe-
riod.
4 IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
This guide contains many important safety messages. Always read and obey all safety messages.
Power
Installation
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards
that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word WARNING or CAUTION. These words mean:
WARNING You can be killed or seriously injured if you do not follow instructions.
CAUTION Indicates an imminently hazardous situation which, if not avoided, may result in
minor or moderate injury, or product damage.
WARNING
To reduce the risk of re, electric shock, or personal injury when using your product,
basic safety precautions should be followed, including the following:
NEVER unplug your refrigerator by pulling
on the power cord. Always grip the plug
and pull it straight out from the
outlet.
Immediately call a technician to repair or
replace all power cords that have become
frayed or otherwise damaged. Do not use
a cord that shows cracks or abrasion
damage along its length or at either the
plug or connector end.
ower outlet.
Unplug the power plug immediately in the
event of a blackout or thunderstorm.
Plug in the power plug with the power
cord facing downward.
Do not plug appliance into a damaged wall
outlet.
If the appliance is submerged or partially
appliance immediately from the main circuit
breakers. Contact the nearest service center
Contact an authorized service center when
you install or relocate the refrigerator.
When moving your refrigerator away from
the wall, be careful not to roll over or
damage the power cord.
Your refrigerator must always be plugged
to its own outlet which is adequately
grounded. The energy current should only
be 115 V ~ 60 Hz, 127 V ~ 60 Hz or 220 V~
50/60 Hz, AC (according to the National
rating type). with a 15 A fuse for voltages
between 115 and 127 V or 10 A to 220 V
independent voltage protection system
from the main supply of your home. (The
electrical installation must be
by a
Do not install the refrigerator where there
may be a danger of the unit falling.
Use
DO NOT allow children to climb, stand,
or hang on the refrigerator doors or on
the shelves in the refrigerator. They could
damage the refrigerator and seriously
injure themselves.
Do not hang on to or place heavy objects
on the refrigerator’s dispenser.
Do not place heavy or dangerous objects
(bottles with liquid) on the refrigerator.
Do not put live animals inside the
refrigerator.
Do not allow children to climb into the
product when it is in use.
In the event of a gas leak (propane/
LPG), ensure adequate ventilation and
contact an authorized service center
before resuming use. Do not touch or
disassemble the electrical outlet of the
refrigerator.
In the event of a refrigerant leak, move
objects away from the
refrigerator. Ensure adequate ventilation
and contact an authorized service center.
Do not use or place substances
(chemicals, medicine, cosmetics, etc) near
the refrigerator or store them inside the
refrigerator. Do not place the refrigerator
in the vicinit
Do not ov or pack items too tightly into
door bins. Doing so may cause damage
to the bin or personal injury if items are
removed with excessive force.
5IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the risk of re, electric shock, or personal injury when using your product, basic
safety precautions should be followed, including the following:
This product is not to be used for special
purposes such as the storage of medicine
or test materials or for use on ships, etc.
Unplug the power plug before cleaning or
repairing the refrigerator.
When a technician replaces the LED lamp
in the refrigerator, unplug the refrigerator or
turn o
Do not modify or extend the power cord.
Do not use a dryer to dry the interior. Do
not light a candle to remove interior odors.
We do not recommend the use of extension cables. However, if you still choose
to utilize an extension cable, it is
absolutely necessary that it is listed in the
UL (in the United States) or CSA (in
Canada), that it supports three-pronged
plugs and that the electrical current
support a 15 A fuse for voltages between
115 and 127 V or 10 A to 220 V. (Verify the
Do not use an outlet that can be turned
o
with a switch. Do not use an extension
cord. It is the user’s responsibility to
replace a standard 2-prong wall outlet
with a standard 3-prong wall outlet.
Do not, under any circumstances, cut or
remove the third (ground) prong from the
pow
of your country.).
Do not use an adapter plug and plug the
power plug into a multi-outlet extension
cord.
Disconnect the power cord immediately if
you hear a noise, smell a strange odor or
detect smoke coming from the appliance.
Turn the power o if water or dust
penetrates into the refrigerator. Call a
service agent.
Do not disassemble or modify the
refrigerator.
Do not put hands, feet, or metal objects
below or behind the refrigerator.
ower.
Do not operate the refrigerator or touch
the power cord with wet hands.
Children should be supervised to ensure
they do not use the device as a toy
In refrigerators with automatic icemakers,
avoid contact with the moving parts
of the ejector mechanism or with the
heating element that releases the cubes.
Do not place
automatic ice-making mechanism while
the refrigerator is plugged in.
When dispensing ice from the dispenser,
do not use crystal ceramics.
Do not touch the cold surfaces in the
freezer compartment with wet or damp
hands, when your refrigerator is in
operation.
Do not put glass containers, glass bottles
or soda in the freezer.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning the use of the
appliance by a person responsible for their
safety.
Do not refreeze frozen food that has
thawed completely. Doing so may result
in a serious health issue.
If you are throwing away y our old
refrigerator, make sure the CFC or HCFC
coolant is removed for proper disposal
by a
CFC/HCFC coolant, you may be
imprisoned in accordance with the relevant
environmental law.
Junked or abandoned refrigerators are
dangerous, even if they are sitting for
only a few days. When disposing of the
refrigerator, remove the packing materials
from the door or take o
leave the shelves in place so that children
may not easily climb inside.
If the refrigerator is connected to a circuit
protected b
y fuses, use time delay fuses.
or hands on the
servicer. If you release
the doors but
ENGLISH
or
6 IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
To reduce the r re, electric shock, or personal injury when using your product, basic
safety precautions should be followed, including the following:
Installation
Use
CAUTION
The refrigerator must be properly
installed in accordance with the Installer
Instructions that were taped to the front
of the refrigerator.
Be careful when you unpack and install
the refrigerator. Immediately dispose of
plastic and other packing materials out of
the reach of children.
The appliance must be positioned for
easy access to a power source.
Close the door carefully when children
are around.
K ch point areas;
clearances between the doors and cabinets are necessarily small. Be careful
closing doors when children are nearby.
If you store food improperly, be aware
that it may fall and cause injury.
Do not use aerosols near the refrigerator.
Do not store articles on the top of the
appliance.
If the appliance's power cord is damaged,
the cord must be replaced by the manufacturer or its service agent or a similarly
hazard. Do not operate the appliance
with a damaged power cord.
Caution: This device is meant to be used
in applications domestic and the like, such
Do not use extension cords or ungrounded
(two prong) adapters.
Do not store explosive substances such as
in this appliance.
Maintenance
Do not use strong detergents like wax or
thinners for cleaning. Clean with a soft
cloth.
Wipe foreign objects (such as dust and
water) o
and contact areas regularly.
Do not store, disassemble or repair the
refrigerator by yourself.
Remove any dust or foreign matter from
the power plug pins.
Do not use a wet or damp cloth when
cleaning the plug.
If the refrigerator is disconnected from
the power supply, wait f
minutes before plugging it back in.
If you notice a chemical or burning
plastic smell or see smoke, unplug the
refrigerator immediately and contact
your LG Electronics Service Center.
The insulation in this unit contains
cyclopentane or a pentane like blowing
and requires a special elimination
process. Before discontinuing use of this
refrigerator, contact local authorities to
arrange forsafe disposal of the unit.
IMPORTANT : Use only new water hose-sets,
do not reuse old water hose -sets
the prongs of the power plug
ve
and other environments I work; cottages
and customers in hotels, motels and other
environments residential; environments
bed and breakfast rate; hospitality non-
commercial and similar applications.
Refrigerator compartment’s lamps are
interior lighting LED type, so maintenance
SAVE THESE INSTRUCTIONS
NOTE
Before a technician installs, cleans or changes
lights, unplug the refrigerator.
and reset the control (of thermostat,
refrigerator or freezer, depending on your
model) to the desired position.
7COMPONENTS
COMPONENTS
Use this page to become more familiar with the parts and features of your refrigerator.
*T
Refrigerator Exterior for Door-In-Door Models
Freezer
Preserves frozen food.
Control Panel
Sets the refrigerator and
freezer temperatures, the
w
dispenser mode.
Filtered Water
and Ice Dispenser
tual product may di er depending on the model.
Refrigerator
Preserves food.
Door-in-Door
ENGLISH
water and ice.
Refrigera
tor Exterior for Standard Model
Vertical Horizontal
Freezer
Preserves frozen food.
Control Panel
Sets the refrigerator and
freezer temperatures, the
w
dispenser mode.
Refrigerator
Preserves food.
Filtered Water
and Ice Dispenser
water and ice.
8 COMPONENTS
ENGLISH
Freezing Zone
Refrigerator Interior for Door-In-Door Models
Freezer
Compartment
LED Lamp
Automatic
Icemaker
Shelf
Door Bin
Door Bin
NOTE
Parts, features and options vary by model.
Your model may not include every option.
Refrigerator
Compartment
Dairy Corner
Filter
LED Lamp
Shelf
Refreshment center
Shelf
Fresh zone
Door Bin
Refrigerator Interior for Standard Model
9COMPONENTS
Vertical Display
LED Lamp
Automatic
Icemaker
Shelf
Door Bin
Freezing Zone
Door Bin
Horizontal Display
Freezer
Compartment
ENGLISH
Refrigerator
Compartment
Dairy Corner
Filter
LED Lamp
Door Bin
Shelf
Shelf
Door Bin
Door Bin
Fresh zone
Door Bin
Freezer
Compartment
LED Lamp
Automatic
Icemaker
Shelf
Freezing Zone
Door Bin
NOTE
Parts, features and options vary by model.
Your model may not include every option.
Refrigerator
Compartment
Dairy Corner
Filter
LED Lamp
Door Bin
Shelf
Door Bin
Fresh zone
Door Bin
10 INSTALLATION
ENGLISH
INSTALLATION
Installation Overview
Please read the following installation instr fter purchasing this product or transporting it
to another location.
1 Unpacking your
refrigerator and remove
vinyl if applicable
2 Choosing the proper
location
3 Disassembling/Assembling
WARNING
Connect to potable water
supply only.
4 Connecting the water
supply and water line
5 Leveling and Door
Alignment
Specifications
The appearance and sp constant product improvements.
Side by Side refrigerator model
Description Side by Side refrigerator
Electrical requirements
Min. / Max. Water pressure
Dimensions for Standard Depth Models 35.8 " (W) X 36.3" (D) X 70.3" (H), 51.1 " (D w/ door open)
LSXS26****, GS7****
Dimensions for Counter Depth Models
LSXC22****
Net weight for Standard Depth Models
LSXS26****, GS7****
Net weight for Counter Depth Models
LSXC22****
Net weight for Counter Depth Models
LSXC22336*
115 V ~ 60 Hz and fused at 15 A
127 V ~ 60 Hz and fused at 15 A
220 V~ 50/60 Hz and fused at 10 A
(Refer to rating label inside refrigerator compartment).
20 - 120 psi (138 - 827 kP
909 mm (W) X 922 mm (D) X 1785 mm (H), 1298 mm (D w/ door open)
After Door Removal: 29.1" (739 mm) (D)
35.9" (W) X 31.8" (D) X 70.3" (H), 46.5" (D w/ door open)
912 mm (W) X 807 mm (D) X 1785 mm (H), 1180 mm (D w/ door open)
After Door Removal: 24.6" (624 mm) (D)
DID Model: 304.3 lb (138 kg)
Basic Model Vertical: 277.8 lb (126 kg)
Basic Model Horizontal: 264.6 lb (120 kg)
DID Model: 277.8 lb (126 kg)
Non DID Model: 251.4 lb (114 kg)
Non DID Model: 280 lb (127 kg)
11INSTALLATION
Unpacking Your Refrigerator
WARNING
Use two or more people to move and
install the refrigerator. Failure to do so
can result in back or other injury.
Your refrigerator is heavy. When moving
the refrigerator for cleaning or service,
be sure to protect the
the refrigerator straight out when mov-
ing it. Do not wiggle or walk the refrig-
erator when trying to move it, as
damage could occur.
Keep materials and va-
pors, such as gasoline, away from the
refrigerator. Failure to do so can result
explosion, or death.
Remove tape and any temporary labels from
your refrigerator before using. Do not remove
any warning-type labels, the model and serial
number label
r. Always pull
Choosing the Proper Location
Select a place where a water supply can
be easily connected for the automatic
icemaker.
NOTE
The water pressure must be between 20
and 120 psi (138 and 827 kPa) on models
without a water
120 psi (276 and 827 kPa) on models with a
lter.
water
The refrigerator should always be plugged
into its own individual properly grounded
electrical outlet.
This provides the best performance and
also prevents overloading house wiring
from overheated wires. It is recommended
that a separate circuit serving only this
appliance be provided.
ter and between 40 and
ENGLISH
To remove any remaining tape or glue, rub
the area briskly with your thumb. Tape or glue
residue can also be easily removed by rubbing
a small amount of liquid dish soap over the
adhesive with y
water and dry.
Please remove vinyl from doors before
connecting unit to the electrical supply
(on some models).
Do not use sharp instruments, rubbing alcohol,
move tape or glue. These products can damage
the surface of your refrigerator.
Refrigerator shelves are installed in the shipping position. Please reinstall shelves according
to your individual storage needs.
Wipe with warm
ve cleaners to re-
WARNING
To reduce the risk of electric shock, do not
install the refrigerator in a wet or damp area.
Flooring
To avoid noise and vibration, the unit must be
leveled and installed on a solidly constructed
r. If required, adjust the leveling legs to
compensate for unev
front should be slightly higher than the rear to
aid in door closing. Leveling legs can be turned
easily by tipping the cabinet slightly. Turn the
leveling legs to the left to raise the unit or to
the right to lower it. (See Leveling and Door
Alignment.)
r. The
NOTE
Installing on carpeting, soft tile surfaces, a
platform or weakly supported structure is
not recommended.
12 INSTALLATION
ENGLISH
Ambient Temperature
Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance is too low or high, cooling ability may be
adversely aected.
Measuring the Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of the
refrigerator to open the doors, and at least
2 inches (5.08 cm)
between the back of the refrigerator and the
wall as well as on the sides of the refrigerator and adjacent walls or objects.
24” (61 cm)
Removing/Assembling the
Refrigerator Door Handles
NOTE
When it is necessary to move the refrigerator
through a narrow opening, removing the
doors is the recommended procedure. If it
is necessary to remove the handles, follow
the directions below. The appearance of the
handle may vary from what is shown in the
illustrations
Removing the Handles
1
Loosen the set screws with a 3/32 in. Allen
wrench and remove the handle.
2 Loosen the mounting fasteners that connect
to the refrigerator door and handle using a
¼ in. Allen wrench, remove the mounting
fasteners.
Mounting
Fasteners
2” (5.08 cm)
Replacement of lamp
The refrigerator compartment lamp is a LED
interior lighting, so maintenance must be
performed by a qualied technician.
Set Screw
Allen Wrench
Assembling the Handles
1
Assemble the mounting fasteners at both
ends of the handle using a ¼ in. Allen
wrench.
2 Place the handle on the door by tting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in. Allen wrench.
Mounting Fasteners
13INSTALLATION
Removing/Assembling the
Refrigerator Doors
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
WARNING
Electric Shock Hazard
Disconnect electrical supply to refrigerator
before installing.
result in death or serious injury.
Before removing freezer door, disconnect
water line connectors (one white tube, one
blue tube).
NOTE: Do not remove freezer door if either
the white or blue tube is still connected. To
remove connectors use the support block
that is on the upper shelf in the refrigerator.
If your entrance door is too narrow
for the refrigerator to pass through,
remove the refrigerator doors and move
the refrigerator sideways through the
doorway.
Use two or more people to remove and
install the refrigerator doors. Failure to do
so can result in back or other injury.
Disconnect the electrical supply to the
refrigerator before installation. Failure
to do so could result in serious injury or
death.
Do not put hands, feet or other objects
into the air vents or bottom of the
refrigerator. You may be injured or receive
an electrical shock.
Be careful when handling the hinge and
stopper. You may be injured.
Remove food and bins before detaching
the doors and drawers.
Failure to do so could
1
Support Block
2
3
120 mm
Removing the Left (Freezer) Door
with Water Line Connection
1. Loosen the hinge cover screws and remove
the hinge cover. Disconnect all wire harnesses.
2. Rotate the hinge lever counterclockwise ( )
and lift the upper hinge ( ).
hinge
cover
upper
hinge
hinge lever
upper hinge
wire
harness
CAUTION
When removing the upper hinge, be careful
that the door does not fall forward.
3. Remove the freezer compartment door by
lifting it upward. This time, the door should be
lifted enough for the water feed tube to be
completely pulled out.
Enough for
the water feed tube
to be completely
pulled out
CAUTION
Place the door, inside facing up, on a
non-scratching surface. Be careful not to
damage the water feed tube.
Removing the Right (Refrigerator) Door
1. Open the door. Remove the top hinge cover
screw.
2.Use a
at blade screwdriver to pry back the
hooks (not shown) of the hinge cover from
the top of the refrigerator cabinet.
Lif
t up
the cover. Disconnect all wire harnesses.
ENGLISH
wire
harness
14 INSTALLATION
hinge lever
upper
hinge
lower hinge
ENGLISH
3. Rotate the hinge lever clockwise (1). Lift the
Reinstalling the Left (Freezer) Door
1. Feed the water tubes through the lower
hinge pin and place the door onto the
lower hinge pin. Water hoses should be
behind the leg to prevent damage.
upper hinge free of the hinge lever latch (2).
CAUTION
When lifting the hinge free of the latch, be
careful that the door does not
fall forward.
4. Lift the door from the lower hinge pin.
5. Place the door, inside facing up, on a nonscratching surface.
NOTE
Do not remove the grease on the surface of the gasket or hinge.
Do not remove the sensor assembly in
the right upper hinge cover.
Reinstalling the Right (Refrigerator) Door
1. Place the door onto the lower hinge pin.
2. Fit the upper hinge over the hinge lever
latch and into place. Rotate the lever
counterclockwise to secure the hinge.
3. Reconnect all wire harnesses. Hook the tab
on the switch side of the cover under the
edge of the wire opening in the cabinet top.
Position the cover and replace the screw.
2. Fit the top hinge over hinge lever latch and
into place. Rotate the lever clockwise to
secure the hinge.
3. Install the grounding screw and connect all
the wire harnesses.
4. Hook the tab on the door switch side of the
cover, under the edge of the wire, opening
in the cabinet top. Position the cover into
place. Insert and tighten the cover screw.
5. Reconnect the water tubes by inserting
the tubes into the connectors. The tube is
inserted correctly when only one guide line
is showing out of two.
Collet
Tube
Insert Line
Open the door and turn the hose toward the inside.
Water hoses should be behind the leg to prevent
damage.
CORRECT
INCORRECT
Tube is completely inserted when only one guide line
is showing out of two.
CORRECT
INCORRECT
Water hoses should be cut with a clean, straight edge
to avoid leaks.
Not Straight Damaged Stretched
15INSTALLATION
Connecting the Water Line
Before You Begin
This water line installation is not covered by the
refrigerator warranty. Follow these instructions
carefully to minimize the risk of expensive water
damage.
Water hammer (water banging in the pipes)
in house plumbing can cause damage to
refrigerator parts and can lead to water leakage
or flooding. Call a qualified plumber to correct
water hammer before installing the water
supply line to the refrigerator.
CAUTION
To prevent burns and product damage, only
connect the refrigerator water line to a cold
water supply.
CAUTION
Do not install the icemaker tubing in areas
where temperatures fall below freezing.
Water Pressure
You will need a cold water supply. The water
pressure must be between 20 and 120 psi ( 138
– 827 kPa ) on
between 40 and 120 psi ( 276 – 827 kPa ) on
models with a water filter. If the water pressure
does not reach the minimum required pressure,
a separate booster pump may be required
for normal automatic icemaker and cool water
dispensing operation.
If a reverse osmosis water filtration system is
connected to your cold water supply, this water
line installation is not covered by the refrigerator
warranty. Follow these instructions carefully to
minimize the risk of expensive water damage.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs
to be a minimum of 40 to 60 psi (276 - 413 kPa,
or less than 2.0~3.0 sec. to fill a cup of 7 oz
capacity).
models without a water filter and
CAUTION
Wear eye protection during installation to
prevent injury.
If the water pressure from the reverse osmosis
system is less than 21 psi or 1.5 kgf/cm2 (takes
more than 4.0 sec to fill a cup of 7 oz capacity):
y Check to see if the sediment filter in
the reverse osmosis system is blocked.
Replace the filter if necessary.
y Allow the storage tank on the reverse
osmosis system to refill after
y If the issue concerning water pressure
from reverse osmosis remains, call a
licensed, qualified plumber.
y All installations must be in accordance
with local plumbing code requirements.
heavy usage.
What You Will Need
y Copper Tubing, ¼ in. outer diameter,
to connect the refrigerator to the water
supply. Be sure both ends of the tubing
are cut square.
To determine how
much tubing you
need: measure the
distance from the
water valve on the back of the refrigerator
to the water supply pipe. Then, add 8 feet
(2.4 m). Be sure there is sufficient extra
tubing (about 8 feet [2.4 m] coiled into 3
turns of about 10 in. [25 cm] diameter) to
allow the refrigerator to move out from
the wall after installation. Keep the total
length of the feed water pipe tube within
26 ft (8 m). Be careful to avoid getting a
kink in the tube. If the tube is longer than
26 ft (8 m), it may cause the water feed to
malfunction.
y Power drill.
y ½ in. or adjustable
wrench.
y Flat blade and Phillips
head screwdrivers.
y Two ¼ in. outer
diameter compression
nuts and 2 ferrules (sleeves) to connect
the copper tubing to the shutoff valve and
the refrigerator water valve.
ENGLISH
16 INSTALLATION
ENGLISH
y If your existing copper water line
has a flared fitting at the end, you
will need an adapter (available at
plumbing supply stores) to connect
the water line
to the
refrigerator OR
you can cut off
the flared fitting with a tube cutter
and then use a compression fitting.
y Shutoff valve to connect to the cold
water line. The shutoff valve should
have a water inlet with a minimum
inside diameter of 5/32 in. at the
point of connection to the COLD
WATER LINE. Saddle-type shutoff
valves are included in many water
supply kits.
Before
purchasing,
make sure
a saddle-
type valve complies with your local
plumbing codes.
NOTE
A self-piercing saddle type water valve
should not be used.
WARNING
Electrical Shock Hazard:
When using any electrical device (such as a
power drill) during installation, be sure the
device is battery powered, double insulated
or grounded in a manner that will prevent the
hazard of electric shock.
17INSTALLATION
Water Line Installation Instructions
WARNING
When using any electrical device (such
as a power drill) during installation, be
sure the device is battery powered,
double insulated or grounded in a
manner that will prevent the hazard of
electric shock.
Install the shuto valve on the nearest
frequently used drinking water line.
1 SHUT OFF THE MAIN WATER SUPPLY
Turn on the nearest faucet to relieve the
pressure on the line.
2 CHOOSE THE VALVE LOCATION
Choose a location
for the valve that is
easily accessible. It is
best to connect into
the side of a vertical
water pipe. When it is
necessary to connect
into a horizontal water pipe, make the
connection to the top or side, rather
than at the bottom, to avoid drawing
o any sediment from the water pipe.
4 FASTEN THE SHUTOFF VALVE
Fasten the shuto valve to the cold water
pipe with the pipe clamp.
5 TIGHTEN THE PIPE CLAMP
Pipe Clamp
Saddle-Type
Shuto Valve
Vertical Cold
Water Pipe
NOTE
Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle
valves are illegal and use is not permitted in
Massachusetts. Consult with your licensed
plumber.
Tighten the clamp screws until the sealing
washer begins to swell.
Do not overtighten clamp or
NOTE:
you may crush the tubing.
6 ROUTE THE TUBING
Pipe Clamp
Clamp Screw
Washer
Inlet End
ENGLISH
3 DRILL THE HOLE FOR THE VALVE
Drill a ¼ in. hole in
the water pipe using
a sharp bit. Remove
any burrs resulting
from drilling the
hole in the pipe. Be
careful not to allow
water to drain into
the drill. Failure to drill a ¼ in. hole may
result in reduced ice production or smaller
cubes.
NOTE
The hookup line cannot be white, plastic
tubing. Licensed plumbers must use only
copper tubing (NDA tubing #49595 or
#49599) or Cross Link Polyethylene (PEX)
tubing.
Route the tubing between the cold water
line and the refrigerator.
Route the tubing through a hole drilled in
the wall or oor (behind the refrigerator or
adjacent base cabinet) as close to the wall as
possible.
NOTE
Be sure there is sucient extra tubing (about
8 feet (2,4 m) coiled into 3 turns of about 10 in.
(0,25 m) diameter) to allow the refrigerator to
move out from the wall after installation.
Loading...