ENGLISH
ESPAÑOL
REFRIGERATOR
Please read this guide thoroughly before operating
and keep it handy for reference at all times.
P/No.:MFL67783521
www.lg.com
CONTENTS
IMPORTANT SAFETY INSTRUCTION ...................................................2
FEATURE CHART....................................................................................4
INSTALLATION .......................................................................................5
OPERATION ............................................................................................6
Starting
Temperature Control
Defrosting
SUGGESTIONS ON FOOD STORAGE ..................................................7
CLEANING ..............................................................................................8
GENERAL INFORMATION .....................................................................8
BEFORE CALLING FOR SERVICE ........................................................9
REPOSITIONING THE DOOR HINGE (Option).....................................10
ENERGY-SAVING METHOD .................................................................11
1
IMPORTANT SAFETY INSTRUCTION
BASIC SAFETY PRECAUTIONS
This guide contains many important safety messages.
Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of
hazards that can kill or hurt you or others or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word DANGER, WARNING, or CAUTION. These words mean:
DANGER
You will be killed or seriously injured if you don’t follow instructions.
WARNING
CAUTION
All safety messages will identify the hazard, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are not followed.
You can be killed or seriously injured if you don’t follow instructions.
Indicates an imminently hazardous situation which, if not avoided,
may result in minor or moderate injury, or product damage only.
DO NOT USE AN EXTENSION CORD
If possible, connect the refrigerator to its own individual electrical outlet to prevent it and other
appliances or household lights from causing an overload that could cause a power outage.
POWER CORD REPLACEMENT
If the power cord of the refrigerator is damaged, it must be replaced by a repair shop appointed
manufacturer, as special tools are required.
ABOUT GROUNDING(EARTHING)
In the event of an electric short circuit, grounding(earthing) reduces the risk of electric shock
by providing an escape wire for the electric current.
In order to prevent possible electric shock, this appliance must be grounded.
Improper use of the grounding plug can result in an electric shock. Consult a qualified electrician
or service person if the grounding instructions are not completely understood, or if you have
doubts on whether the appliance is properly grounded.
VERY DANGEROUS ATTRACTION
An empty refrigerator can be a dangerous
attraction to children. Remove either gasket,
latches, lid or the entire door from your unused
appliance,or take some other action to make it
harmless.
Do not store explosive substances such as
aerosol cans with a flammable propellant in
this appliance.
This appliance must be grounded(earthed).
DON'T WAIT! DO IT NOW!
NEVER STORE EXPLOSIVES AND CHEMICALS
CAUTION
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.Keep the key out
of reach of children and not in the vicinity of the refrigerator.
WARNING
2
IMPORTANT WARNINGS
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other
than those
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
The refrigerant and insulation blowing gas used in the appliance require special disposal
procedures. When disposal, please consult with service agent or a similarly qualified person.
This appliance contains a small amount of isobutane refrigerant (R600a), natural gas with high
environmental compatibility, but it is also combustible. When transporting and installing the
appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged.
Refrigerant squirting out of the pipes could ignite or cause an eye injury. If a leak is detected,
avoid any naked flames or potential sources of ignition and air the room in which the appliance
is standing for several minutes.
In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating circuit occurs,
the size of the room in which the appliance may be sited depends on the amount of refrigerant used.
The room must be 1m in size for every 8g of R600a refrigerant inside the appliance.
The amount of refrigerant in your particular appliance is shown on the identification plate inside the
appliance. Never start up an appliance showing any signs of damage. If in doubt, consult your dealer.
recommended by the manufacturer.
2
3
FEATURE CHART
Evaporator
Drip Tray & Shelf
Catches the water that drips
off the evaporator when
defrosting, and have full width
and can slide out.
Thermostat Dial
For controlling the
temperature
in the refrigerator.
Magnetic Door Seal
Door Rack
Leveling Screw
4
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE
AND RELIABILITY.
BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
1. Select a good location.
Place your refrigerator where it is easy to use.
2. Avoid placing the unit near heat sources, direct
sunlight or moisture.
3. To ensure proper air circulation around the
fridge-freezer, please maintain sufficient space
on both the sides as well as top and maintain
at least 2 inches (5 cm) from the rear wall.
4. To avoid vibrations, the unit must be level.
If required, adjust the leveling screw to
compensate for unevenness of the floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screw can be turned easily by tipping
the cabinet slightly.
Turn the leveling screw clockwise to raise the
unit, counterclockwise to lower it.
5. Clean your refrigerator thoroughly and wipe off
all dust accumulated during shipping.
6. Install accessories such as ice tray, shelf, etc.,
in their proper places.They are packed together
to prevent possible damage during shipment.
7. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on
the same outlet.
8. Prior to use, leave your refrigerator on for 2 or 3
hours.
Check the flow of cold air on the evaporator to
ensure proper cooling.
Your refrigerator is now ready for use.
9. When you put in a power cord, please refer to
the label situated on the back plate in order to
classify the rating.
10. This appliance is intended to be used in household
and similar applications such as staff kitchen areas
in shops, offices and other working environments;
farm houses and by clients in hotels, motels and
other residential type environments; bed and
breakfast type environments; catering and similar
non-retail applications.
OPERATIONS
OPERATION
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperature
before filling it with fresh food.
If operation is interrupted, wait 5 minutes before restarting.
TEMPERATURE CONTROL
Initially, set the refrigerator compartment control
at mid position.
5
4
3
2
1
0
6
7
If you wish a colder temperature, set the desired
compartment control to a higher number.
1.In order to defrost , the control should be set
at “o”, the compressor will also off when at “0”.
“7”is quick freeze , and the compressor will
always running at “7”.
2. To make ice, turn the control above 6”.
ICE MAKING
To make ice cubes, fill the ice tray with water and place
it on the evaporator.
To remove ice cubes, hold the tray at its ends and twist
gently.
To remove ice cubes easily, run water on the tray
TIP
before twisting.
WARNING
Fill with potable water only.
6
OPERATION
DEFROSTING
It is necessary to regularly defrost your refrigerator in order to ensure efficient operation.
The frost on the surface of the evaporator should not exceed a quarter of an inch(6mm) before
defrosting.
To defrost, turn the control to '0'.
Before you start the defrosting operation, remove food from the evaporator and place the drip tray in its
proper position.
When defrosting is completed, remove the drip tray, empty water, dry and put it back to its normal position.
Turn the control dial to a desired position.
CAUTION
Never use any sharp or metallic instruments to remove ice, frost or
ice tray from the evaporator.
SUGGESTIONS ON FOOD STORAGE
STORING FOOD
Store fresh food in the refrigerator. How food is frozen and thawed is an important factor in maintaining
its freshness and flavor.
Do not store food which goes bad easily at low temperatures, such as bananas, pineapples, and melons.
Allow hot food to cool prior to storing. Placing hot food in the refrigerator could spoil other food, and lead
to higher electric bills!
When storing, wrap food in vinyl, or place in a covered container. This prevents moisture from
evaporating, and helps food to keep its taste and nutrients.
Do not open the door frequently. Opening the door lets warm air enter the refrigerator, causing
temperatures to rise.
Do not store bottles on the evaporator - they may break when frozen.
Always clean food prior to refrigeration. Vegetables and fruits should be washed and wiped, and packed
food should be wiped clean, to prevent adjacent food from spoiling.
CLEANING
It is important that your refrigerator be kept clean to
prevent undesirable odors. Spilled food should be
wiped up immediately, since it may acidify and
stain plastic surfaces if allowed to settle.
Never use metallic scouring pads, brushes, coarse
abrasive cleaners, or strong alkaline solutions on
any surface.
Before you clean, however, remember that damp
objects will stick or adhere to extremely cold
surfaces. Do not touch frozen surfaces with wet or
damp hands.
EXTERIOR - Use a lukewarm solution of mild soap
or detergent to clean the durable finish of your
refrigerator. Wipe with a clean, damp cloth and
then dry.
For products with a stainless steel exterior, use a
clean sponge or soft cloth and a mildDetergent in
warm water.
GENERAL INFORMATION
VACATION TIME
During average length vacations, you will probably
find it best to leave the refrigerator in operation.
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean
the interior thoroughly, and leave the door OPEN to
prevent odor formation.
POWER FAILURE
Most power failures are corrected within an hour or
two and will not affect your refrigerator
temperatures. However, you should minimize the
number of door openings while the power is off.
During power failures of longer duration, place a
block of dry ice on top of your frozen packages.
Do not use abrasive or harsh cleaners.
Dry thoroughly with a Soft cloth.
Do not use appliance wax, bleach, or other products
containing chlorine on stainless steel.
INTERIOR - Regular cleaning of the interior and
interior parts is recommended. Disconnect the
power supply, and remove food and shelves, trays,
etc. Wash all compartments and shelves, trays etc.
with a baking soda solution. Rinse and dry.
THE WARNING
Always remove the power cord from the wall
outlet prior to cleaning in the vicinity of
electrical parts. Wipe up excess moisture with
a sponge or cloth to prevent water or liquid
from getting into any electrical part and
causing a electric shock. Do not use
flammable or toxic cleaning liquids.
IF YOU MOVE
Remove or securely fasten down all loose items
inside the refrigerator.
To avoid damaging the leveling screw(s), turn them
all the way into the base.
ANTI-CONDENSATION PIPE
The outside wall of the refrigerator cabinet may
sometimes get warm, especially just after
installation.
Don't be alarmed. This is due to the anticondensation pipe, which pumps hot refrigerant to
prevent sweating on the outer cabinet wall.
8
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the government
or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact
your city office, waste disposal service or the shop where you purchased the product.
9
REPOSITIONING THE DOOR HINGE(Option)
Your refrigerator is designed with a reversible door so that is may open from either left or right. It is best to
reposition the door hinge as necessary at the outset since it is inconvenient to do so later.
To change the door hinge please refer to the diagram below and proceed as follows:—
K
1. Remove Hinge Cover (A) and Hinge Cap (B).
2. Loosen three bolts (C) and remove Upper Hinge (D).
3. Remove Door.
4. Lay down Refrigerator.
5. Loosen two bolts (E) and remove Lower Hinge (F) and
6. Loosen Bolt (H) and remove Leg (J).
7.
Insert Washer (G) to Lower Hinge (F) and fix them on the opposite side using two bolts (E).
8. Fix Leg (J) using Bolt (H).
9. Remove Hinge Cap (K) from Door and fix it on the opposite side.
10. Insert Door into Lower Hinge (F), insert Upper Hinge (D) to Door, and then fix it using three bolts (C).
11. Replace Hinge Cover (A) and Hinge Cap (B).
12. Carefully stand the appliance up, (you will need assistance to do this), and position it in its permanent
location.
13.
Check that the door opens and closes easily. Ensure that the door seal does not bind on the hinge side
creating gaps which would allow air into the interior. Adjust the hinges if necessary.
This appliance should be stood on a firm, level floor with sufficient space for free airflow around it. (At least
10mm all round and, subject to location, 20mm beneath the worksurface). Avoid positions close to walls or
corners. There must be sufficient room for free ventilation particularly at the back. The unit should be located away from direct heat sources, such as cookers, radiators and direct sunlight. If the unit is positioned
where the temperature is too low, condensation will form on the outside of the cabinet. Normal room temperature is recommended.
Avoid locations which may be affected by draughts or dampness as this will impair the efficiency of the
product.
B
J
H
Washer (G).
A
D
G
F
C
E
Note
Reversing the doors is not covered by the warranty.
10
ENERGY-SAVING METHOD
Install the fridge in a shady,cool and well-ventilated place.
Do not open and close the door frequently if not necessary.
Please do not keep the door open for a long time, close door in the shortest time
Allow hot food to cool prior to storing
Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
Do not set the temperature of refrigerator lower than needed.
Do not put the food near the temperature sensor.
Food need’t store is not advised to be put in.
Place the deep-frozen food for thawing intorefrigerator; they can be used for cooling the
refrigerator.（Applicabe to some models only）
Clean up the back cover and anti-condensation pipe termly (once a year) to make sure heat exchange
in gear.（Applicabe to some models only）
Do not block air vents with food.（ Applicabe to some models only）
11
Loading...