LG GC-051SQ Owner’s Manual
<![endif]>ENGLISH
REFRIGERATOR
Please read this guide thoroughly before operating and keep it handy for reference at all times.
P/NO.:MFL38422698 |
www.lg.com |
CONTENTS
INSTALLATION ........................................................... |
2 |
FEATURE CHART ...................................................... |
3 |
OPERATION ............................................................... |
4 |
Starting |
|
Temperature Control |
|
Ice Making |
|
Defrosting |
|
SUGGESTIONS ON FOOD STORAGE ..................... |
5 |
CLEANING ................................................................. |
6 |
GENERAL INFORMATION ........................................ |
6 |
IMPORTANT WARNINGS .......................................... |
7 |
BEFORE CALLING FOR SERVICE ........................... |
8 |
1
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE AND RELIABILITY.
BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY. IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
1.Select a good location.
Place your refrigerator where it is easy to use.
2.Avoid placing the unit near heat sources, direct sunlight or moisture.
3.To ensure proper air circulation around the fridge-freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall.
4.To avoid vibrations, the unit must be level. If required, adjust the leveling screw to compensate for unevenness of the floor.
The front should be slightly higher than the rear to aid in door closing.
Leveling screw can be turned easily by tipping the cabinet slightly.
Turn the leveling screw clockwise to raise the unit, counterclockwise to lower it.
5.Clean your refrigerator thoroughly and wipe off all dust accumulated during shipping.
6.Install accessories such as ice tray, shelf, etc., in their proper places.They are packed together to prevent possible damage during shipment.
7.Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet.
8.Prior to use, leave your refrigerator on for 2 or 3 hours.
Check the flow of cold air on the evaporator to ensure proper cooling.
Your refrigerator is now ready for use.
9.When you put in a power cord, please refer to the label situated on the back plate in order to classify the rating.
2
Loading...