LG FFH-515A, FFH-515L, FFH-515S, FFH-515AX, FFH-515AD OWNER’S MANUAL
...
MINI HI-FI AUDIO SYSTEM
OWNERÕS MANUAL
MODELS : FFH-515A/L/S/AX/AD
FE-515E
FFH-717A/L/S/AX/AD
FE-717E
FFH-818A/L/S/AX/AD
FE-818E
Please read this manual carefully before operating your set.
Retain it for future reference.
Designs and specifications are subject to change
without notice for improvement.
P/N:3828SXD018T
(for CE region)
N0M
061
NYCE
N0M
260
NYCE
COMPACT
DIGITAL AUDIO
2
Explanation Graphical Symbols:
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
This label is located on the interior.
This Compact Disc player
is classified as a CLASS 1
LASER product.
The CLASS 1 LASER
PRODUCT label is located
on the exterior.
(FOR CUSTOMERS IN CANADA)
CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE,
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
This class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
WARNING:
SHOCK HAZARD - DO NOT OPEN
MISE EN GARDE:
Pour éviter les chocs électriques, n’utilisez pas cette fiche (polarisée)
avec une rallonge, un réceptacle ou une autre prise si vous ne pouvez
pas y insérer les broches à fond.
MISE EN GARDE
Cet appareil numérique de la classe B respecte toutes les exigences
de Règlement sur le matériel brouilleur de Canada.
AVERTISSEMENT
RISQUE DE CHOC ELECTRIQUENE-PAS OUVRIR
(FOR CUSTOMERS IN THE UNITED STATES OF AMERICA)
NOTE:
The interference potential to the device.
This equipment generates and uses radio frequency energy and if not
installed and used properly, that is in strict accordance with the
manufacturer’s instructions, may cause interference to radio and
television reception. It has been type tested and found to comply with
the limits for a Class B computing device in accordance with the
specifications in subparts J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference in
a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user in
encouraged to try to correct the interference by one of more of the
following measures:
- Reorients or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
(FOR CUSTOMERS IN THE UNITED KINGDOM)
WIRING INSTRUCTIONS
This appliance is supplied with a BS1363 approved 3 amp fused mains
plug. When replacing the fuse always use a 3 amp BS1362 approved
type. Never use this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your supplying dealer or “LG
ELECTRONICS U.K.LTD”.
If the mains sockets in your home differ, or are not suitable for the type
of plug supplied, then the plug should be removed and a suitable type
fitted. Please refer to the wiring instructions below:
Warning :
The mains plug severed from the mains lead of this appliance must be
destroyed. A mains plug with bared wires is hazardous if engaged in a
mains output line socket.
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following codes:
Blue : Neutral
Brown : Live
As the colour of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
If a 13 amp BS1363 plug or any other type of plug is used, 3 amp
BS1362 approved fuse must be fitted either in the plug or at the
distribution board.
Warning :
Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol or coloured green or green and yellow.
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Note to CATV system Installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
C A U T I O N : INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO
BEAM.
W A R N I N G : OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD STRÅLEN ÄR FARLIG.
ATTENTION: Quand I’appareil est ouvert, ne pas s’exposer
aux radiations invisibles du faisceau laser.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
(FOR THE CUSTOMERS IN EUROPE)
If this product is marked with the CE-symbol, it means which
is conformed to EMC regulation 89/336/EEC.
3
IMPORTANT SAFETY INSTRUCTIONS
FOR CUSTOMERS IN THE UNITED STATES
¥ Read instructions - All the safety and operating
instructions should be read before the product is
operated.
¥ Retain instructions - The safety and operating
instructions should be retained for future
reference.
¥ Heed Warnings - All warnings on the product and
in the operatiog instructions should be followed.
¥ Follow instructions - All operating and use
instructions should be followed.
¥ Cleaning - Unplug this product from the wall
outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for
cleaning.
¥ Attachments - Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
¥ Water and Moisture - Do not use this product near
water-for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.
¥ Accessories - Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use
only with a stand, tripod, bracket, or table
recommended by the manufactur or sold with the
product. Any mounting of the product should
follow the manufacturerÕs instructions and should
use a mounting accessory recommended by the
manufacturer.
¥ A product and cart combination should be moved
with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
¥ Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa,
rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturerÕs instructions have been followed.
¥ Power Sources - This product should be operated
only from the type of power source indicated on
the marking label. If you are not sure of the type
of power supply to your home, consult your
product dealer or local power company. For
products intended to operate from battery power,
or other sources, refer to the operating
instructions.
¥ Power-Cord Protection - Power supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the product.
¥ Protective Attachment Plug - The product is
equipped with an attachment plug having overload
protection. This is a safety feature. See Instruction
Manual for replacement or restting or protective
device. If replacement of the plug is required, be
sure the service technician has used a
replacement play specified by the manufacturer
that has the same overload protection as the
original plug.
¥ Lightning - For added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the product due to lightning and powerline surges.
CAUTION:
¥ Read all of these instructions.
¥ Save these instructions for later use.
¥ Follow all warnings and instructions maked on
the audio equipment.
4
Antenna
Lead-in Wire
Antenna Discharge
Unit (NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamp
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
Ground Clamps
Electric
Service
Equipment
¥ Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up
static charges.
¥ Article 810 of the National Electrical Code,
ANSI/NFPA 70 proviedes information with regard to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
¥ Power Lines - An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
¥ Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles, as this
can result in a risk of fire or electric shock.
¥ Object and Liquid Entry - Never push objects of any
kind into this poroduct through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the product.
¥ Servicing - Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
¥ Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into
the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the product to its normal operation.
e) If the product has been dropped or damaged in
any way.
f) When the product exhibits a distinct change in
performance, this indicates a need for service.
¥ Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
¥ Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
¥ Wall or Ceiling Mounting - The product should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
¥ Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
5
30
31
32
34 33
OPTION
OPERATING ELEMENTS
FRONT VIEW
1. TUNING DOWN/UP(TUNER), TAPE REWIND /
FAST FORWARD(TAPE), TRACK SKIP /
SEARCH(CD) ( / ) buttons
2. RECORD / RECORD PAUSE buttons
3. MEMORY / PROGRAM button
4. MODE / RIF button
5. REMOTE SENSOR
6. MDSS indicator
7. MDSS button
8. POWER button
9. DEMOSTRATION button (DEMO)
PLAY MODE button (OPTIONAL)
10. UBB (Ultra Bass Booster) / Hi-TONE button
11. NORMAL DUBBING / CD SYNCHRO
RECORDING button
12. HEADPHONE socket (PHONES)
13. HI-SPEED DUBBING button
14. TAPE DECK 1 EJECT position ( EJECT)
15. FUNCTION SELECT buttons (TUNER BAND,
CD, TAPE 1/2, AUX)
16. PRESET DOWN / BACKWARD PLAY
(OPTIONAL) button (PRESET DOWN / )
17. TAPE STOP / CD STOP / CLEAR button
( / CLEAR)
18. PRESET UP / FORWARD PLAY button
(PRESET UP / )
19. JOG DIAL
¥ PRESET DOWN/UP (TUNER)
¥ ADJUST DOWN/UP (CLOCK/TIMER)
¥ SKIP DOWN/UP (CD TRACK)
20. TAPE DECK 2 EJECT POSITION ( EJECT)
21. CD PAUSE / SET(CLOCK / TIMER) / COUNTER
RESET (TAPE) button (CD II / SET / COUNTER
RESET) / RDS (TUNER) : OPTIONAL
22. DISC DIRECT PLAY buttons (DISC1, DISC2,
DISC3)
23. DISC SKIP button
24. CD OPEN/CLOSE button
25. CD PAUSE / SET indicator
26. VOLUME knob
27. TIMER button
28. CLOCK button
29. CD DOOR
BACK VIEW
30. ANTENNA (AERIAL) terminal
31. AUXILIARY / PHONO (OPTIONAL) INPUT
SOCKET
32. SPEAKER terminal
33. VOLTAGE SELECTOR (OPTIONAL)
34. POWER CORD
1
2
3
4
5
6
14
15
16
8
9
10
7
11
12
13
17 18
20
19
22
23
24
26
27
29
28
25
21
FRONT VIEW BACK VIEW
6
POWER
SLEEP
TAPE 1
TAPE 2
REC II
D.SKIP
REPEAT
EQ.PATT
DIS.MODE
MUTE
AUX
TUNER/BAND
PRESET
VOLUME
1
2
3
4
5
6
7
8
9
10
11
OPTIONAL
FUNCTION DISPLAY
REMOTE CONTROL
1. LEVEL indicator
2. FUNCTION, VOLUME LEVEL, CLOCK,
FREQUENCY, TAPE COUNTER, CD PLAYING
TIME display
3. MUTE indicator
4. PLAY MODE indicator
(Use only auto reverse deck)
5. TAPE DIRECTION indicator
6. UBB indicator
7. CD MUSIC CALENDAR OVER indicator
8. FM STEREO indicator
9. FM MONO indicator
10. VOLUME indicator
11. RDS function indicator (OPTIONAL)
12. TIMER indicator
13. DISC NO. indicator
14. CD MUSIC CALENDAR
15. RECORD indicator
16. PLAY / PAUSE indicator
17. CD REPEAT indicator
1. POWER button
2. SLEEP button
3. DISPLAY MODE button
4. EQ PATTERN button
5. MUTE button
6. TAPE FUNCTIONS
¥ RECORD / RECORD PAUSE button( /REC II)
¥ STOP button( )
¥ FORWARD PLAY button ( )
¥ BACKWARD PLAY button ( ) : OPTIONAL
¥ REWIND / FAST FORWARD button ( / )
¥ TAPE 1 / TAPE 2 button
7. CD FUNCTIONS
¥ DISK SKIP (D.SKIP) button
¥ REPEAT button
¥ PLAY/PAUSE ( / ) button
¥ STOP/CLEAR ( ) button
¥ SKIP / SEARCH ( / )button
8. TUNER / BAND button
9. AUX button
10. PRESET DOWN/UP ( / ) button
11. VOLUME CONTROL (+/-) buttons
REC
VOLUME
OVER
kHz
MHz
1
ALL
DISC
REC
1
RDS MONO
2
132 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1
17 11
12
14 13 12 10 6 45 38 791516
Loading...