To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
WARNING: This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment and receiver.
yConnect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV technician for
help.
CAUTION: Any changes or modications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modications to this equipment
may cause harmful interference unless the modications are
expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized
change or modication is made.
FCC RF Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed
and operated with minimum distance 20 cm between the
radiator and your body. End users must follow the specic
operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
CAUTION: Regulations of the FCC and FAA prohibit airborne
operation of radio-frequency wireless devices because their
signals could interfere with critical aircraft instruments.
Responsible Party:
LG Electronics USA, Inc. 1000 Sylvan Avenue
Englewood Cliffs, NJ 07632
yWhen you use the multiple socket, it is advisable to use 15
A socket. 10 A socket may cause power off due to lack of
power supply.
yDo not place objects on the speakers. It may cause the objects
to fall and make property damage.
yInstall the speakers on a rm surface not to slide. The
vibration caused by the strong output can shake and move
the speakers.
yAvoid turning up max volume in a small enclosed space. The
powerful and intense output of the speakers can shake the
ceiling and get the objects in the room falling.
yTo protect from hearing damage, keep the sufcient distance
from the speaker. The overwhelming sound from the speaker
may cause a person’s hearing damage.
yAllow more than 20 cm of free space between the main set
and the speakers when you install the main set on the ground.
High sound pressure from the speakers can make the set
tremble to disturb the CD playback.
yConnect the power cord to wall outlet directly if possible. Or
when you use an extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A or 230 V / 15 A,
otherwise the unit may not operate properly because of the
lack of power supply.
yDo not overload the extension cord with excessive electrical
load.
Note
yDo not look directly at the light emitting part when the
LIGHTING is turned on.
yIf the illumination brightness is glaring, switch on the room
lights or turn off the LIGHTING of the unit.
Replacement of battery
About Ferrite Core (Optional)
Wind the L SPEAKERS cables around the ferrite core twice.
Wind the R SPEAKERS cables around the ferrite core twice.
Wind the LEFT and RIGHT SPEAKER LIGHTING cables all
together around the ferrite core twice.
Grounding
(Except for devices which are not grounded.) Ensure that you
connect the earth ground wire to prevent possible electric shock
(i.e. a Audio with a three-prong grounded AC plug must be
connected to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualied electrician install
a separate circuit breaker. Do not try to ground the unit by
connecting it to telephone wires, lightening rods, or gas pipes.
Controller App
Download the Music Flow Bluetooth App to your
device.