LG CG180 Users manual

CG180

User Guide

Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. "

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. if this

equipment does cause harmful interference or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help.

LIMITED WARRANTY STATEMENT

1. WHAT THIS WARRANTY COVERS:

LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product. (2) The limited warranty extends on to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user. (3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada. (4) The external housing and cosmetic parts shall not be covered under these limited warranty terms. (5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase. (6) The customer shall bear the cost of shipping the product to the Customer Service Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty.

2. WHAT THIS WARRANTY DOES NOT COVER:

(1) Defects or damages resulting from use of the product i n other than its normal and customary manner. (2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping blown fuses spills of food or liquid. (3) Breakage or damage to antennas unless caused directly by defects in material or workmanship. (4) That the Customer Service Department at LG was net notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period. (5) Products which have had the serial number removed or made illegible. (6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by operations law, statutory or otherwise, including, but limited to any implied warranty of marketability or fitness for a particular use. (7) Damage resulting from use of non-LG approved accessories. (8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use. (9) Products operated outside published maximum ratings. 3 (10) Products used or obtained in a rental prog ram. (11) Consumables (such as fuses).

3. STATE LAW RIGHTS:

No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED W ARRA NTY OF MAR KETABILITY APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

4. HOW TO GET WARRANTY SERVICE:

To obtain warranty service, please call the following web address:

www.lgeservice.com

For Your Safety

Important Information

This user guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone. Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment.

Before You Start

Safety Instructions

WARNING! To reduce the possibility of electric shock, do not

expose your phone to high humidity areas, such as the bathroom, swimming pool, etc.

Always store your phone away from heat. Never store your phone in settings that may expose it to temperatures less than 32°F or greater than 104°F, such as outside during extreme weather conditions or in your car on a hot day. Exposure to excessive cold or heat will result in malfunction, damage and/or catastrophic failure.

Be careful when using your phone near other electronic devices. RF emissions from your mobile phone may affect

nearby in adequately shielded electronic equipment. You should consult with manufacturers of any personal medical devices such as pacemakers and hearing aides to determine if they are susceptible to interference from your mobile phone.

Turn off your phone in a medical facility or at a gas station. Never place your phone in a microwave oven as this will cause the battery to explode.

IMPORTANT! Please read the TIA SAFETY INFORMATION on page 78 before using your phone.

Safety Information

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

] Never use an unapproved battery since this could damage

the phone and/or battery and could cause the battery to explode.

] Never place your phone in a microwave oven as it will

cause the battery to explode.

] Do not dispose of your battery by fire or with hazardous or

flammable materials.

] Make sure that no sharp-edged items come into contact

with the battery. There is a risk of this causing a fire.

] Store the battery in a place out of reach of children. ] Be careful that children do not swallow any parts such as

rubber plugs (earphone, connection parts of the phone, etc.). This could cause asphyxiation or suffocation.

For Your Safety

] Unplug the power cord and charger during lightning storms

to avoid electric shock or fire.

] When riding in a car, do not leave your phone or set up the

hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is activated, you may be seriously injured.

] Do not use a hand-held phone while driving. ] Do not use the phone in areas where its use is prohibited.

(For example: aircraft).

] Do not expose the battery charger or adapter to direct

sunlight or use it in places with high humidity, such as a bathroom.

] Never store your phone in temperatures less than- 4°F or

greater than 122°F.

] Do not use harsh chemicals (such as alcohol, benzene,

thinners, etc.) or detergents to clean your phone. There is a risk of this causing a fire.

] Do not drop, strike, or shake your phone severely. Such

actions may harm the internal circuit boards of the phone.

] Do not use your phone in high explosive areas as the phone

may generate sparks.

] Do not damage the power cord by bending, twisting, pulling,

or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

] Do not place any heavy items on the power cord. Do not

allow the power cord to be crimped as it may cause fire or electric shock.

] Do not handle the phone with wet hands while it is being

charged. It may cause an electric shock or seriously damage your phone.

] Do not disassemble the phone. ] Do not place or answer calls while charging the phone as it

may short-circuit the phone and/or cause electric shock or fire.

] Only use the batteries, antennas, and chargers provided by

LG. The warranty will not be applied to products provided by other suppliers.

] Only authorized personnel should service the phone and its

accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

] Do not hold or let the antenna come in contact with your

body during a call.

] An emergency call can be made only within a service area.

For an emergency call, make sure that you are within a service area and that the phone is turned on.

For Your Safety

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal Communications (FCC) of he United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.

The design of this phone complies with the FCC guidelines and these international standards.

CAUTION

Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with skin, a minor burn may result. Contact your local dealer for a replacement antenna.

Body-worn Operation

This device was tested for typical body-worn operations with the back of the phone kept 0.79 inches (2cm) between the user’s body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of 0.79 inches(2cm) must be maintained between the user's body and the back of the phone. Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Body-worn accessories that cannot maintain 0.79 inches(2cm) separation distance between the user's body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.

For Your Safety

Vehicle Mounted External Antenna (optional, if available)

A minimum separation distance of 8 inches (20cm) must be maintained between the user/bystander and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, visit the FCC website at www.fcc.gov

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation.

Cautions for Battery

] Do not disassemble. ] Do not short-circuit. ] Do not expose to high temperature: 60°C (140°F).] ] Do not incinerate.

Battery Disposal

] Please dispose of your battery properly or bring to your

local wireless carrier for recycling.

] Do not dispose in fire or with hazardous or flammable

materials.

Adapter (Charger) Cautions

] Using the wrong battery charger could damage your phone

and void your warranty.

] The adapter or battery charger is intended for indoor use

only.

Do not expose the adapter or battery charger to direct sunlight or use it in places with high humidity, such as the bathroom.

Your Phone

Your Phone’s Features

1. Earpiece

2,8. Left soft key/Right soft key: Each

of these keys performs the functions indicated by the text on the display immediately above them.

3. Send key: You can dial a phone number and answer incoming calls. Press this key in standby mode to quickly access the most recent incoming, outgoing and missed calls.

4. Alphanumeric keys: These keys are used to dial a number in standby mode and to enter numbers or characters in edit mode.

5. Microphone: Can be muted during a call for privacy.

6. Display screen: Displays phone status icons, menu items, Web information, pictures and more in full color.

7. Navigation key: Use for quick access to phone functions.

9. End/Power key: Allows you to power the phone on or off, end calls, or return to Standby Mode.

Your Phone

Menu Mall

Speakerphone

Backlight

A backlight illuminates the display and the keypad. When you press any key or open the flip, the backlight turns on. It turns off if no key is pressed within a given period of time, depending on the Backlight Timer menu option. To specify the length of time the backlight is active, set the Backlight Timer menu option (Menu 9.2.3).

Display Information

Icon area

Text and graphic area

Menu Mall

Area Description

First line Displays various icons.

See page 15

Middle lines Display messages,

instructions and any information that you enter, such as number to be dialed.

Last line Shows the functions

currently assigned to the two soft keys.

Soft key indications

On-Screen Icons

The table below describes various display indicators or icons that appear on the phone’s display screen.

Icon Description

Indicates the strength of the network signal.

Indicates that GPRS service is available.

Indicates the status of the battery charge.

Indicates a call is in progress.

Indicates the alarm has been set and is on.

Indicates the Schedule function.

Indicates the receipt of a message.

Indicates the receipt of a voice mail.

Indicates Ring has been set for alert.

Indicates Silent has been set for alert.

Indicates that Vibration has been set for alert.

Indicates the speakerphone has been activated.

Indicates the TTY has been set and is on.

Your Phone

Getting Started

Installing the SmartChip

When you subscribe to a cellular network, you are provided with a plug-in SmartChip loaded with your subscription details, such as your PIN, any optional services available and many others.

n Important!

The plug-in SmartChip and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all SmartChips out of the reach of small children.

1. If necessary, switch off the phone by holding down the [END] key until the power-off image displays.

2. Remove the battery. To do so:

3. Slide the SmartChip into the SmartChip socket so that it locks the card into place. Make sure that the notched corner is top left and the gold contacts of the card face into the phone.

n Note

When you need to remove the SmartChip, slide it, as shown, and take it out of the socket.

Getting Started

4. To insert the battery, align the golden

contacts of the battery with the corresponding connectors on the battery compartment. Press down on the opposite end of the battery until it snaps into place.

5. Attach the back cover by sliding up into position until it clicks.

Charging the Battery

The use of unauthorized accessories could damage your phone and void your warranty.

To use the travel charger provided with your phone:

1. With the battery in position on the phone, connect the lead from the travel charger to the bottom of the phone. Check that the arrow on the lead connector is facing towards the front of the phone.

2. Connect the travel charger to a standard AC wall outlet. Only use the travel charger that comes included with the package.

n Warning

The travel charger must be unplugged before you remove the battery, otherwise, the phone could be damaged.

Getting Started

Menu Mall

3. When charging is finished, disconnect the travel charger from the phone by pressing on the gray tabs on both sides of the connector while pulling the connector out.

n Notice

]

If your phone is powered on while charging, you’ll see the bars in the battery indicator icon cycle. When the battery is fully charged, the bars in the battery indicator icon will flash on and off.

If the battery fails to charge completely:

]

After turning the phone on and off, please attempt to recharge the battery.

]

After detaching and reattaching the battery, please attempt to recharge the battery.

Turning Your Phone On and Off

1. Hold down the [END] key until

the phone switches on.

2. If the phone asks for a PIN, enter the PIN and the key.

The phone searches for your network and after finding it goes to the idle screen as illustrated below. From the idle screen, you can make or receive a call.

Menu Mall

n Note

The display language is preset to Automatic at the factory. To change the language, use the Languages menu option (Menu 9.2.5).

3. When you wish to switch the phone off, hold down the [END] key until the power-off image displays.

Access Codes

You can use the access codes described in this section to avoid unauthorized use of your phone. The access codes can be changed by using the Change Codes feature (Menu 9.5.4).

Security code (4 digits)

The security code protects the unauthorized use of your phone. The default security code is set to ‘0000’and the security code is required to delete all phone entries and to activate the Restore Factory Settings menu. The security code default setting can be modified from the Security Settings menu.

Getting Started

General Functions

Making a Call

1. Make sure your phone is powered on.

2. Enter a phone number including the

area code. To edit a number on the display screen, simply press the key to erase one digit at a time.

] Press and hold the key to erase

the entire number.

3. Press the [SEND] key to call the number.

4. When finished, press the [END] key.

Making a Call by Send Key

2. Press the [SEND] key, and the most recent incoming, outgoing and missed phone numbers will be displayed.

2. Select the desired number by using the navigation key.

3. Press the [SEND] key.

Making International Calls

1. Press and hold the key and the international access character ‘+’ will appear.

2. Enter the country code, area code, and the phone number.

3. Press the [SEND] key.

Ending a Call

When you have finished a call, press the [END] key.

Making a Call From the Contacts

You can store names and phone numbers dialed frequently in the SmartChip as well as in the phone memory known as the Contacts.

You can dial a number by simply selecting a name in the contacts and pressing the [SEND] key.

General Functions

Adjusting the Volume

During a call, if you want to adjust the earpiece volume, use the side keys of the phone.

In idle mode, you can adjust the ring volume using the side keys.

Answering a Call

When you receive a call, the phone rings and the flashing phone icon appears on the screen. If the caller can be identified, the caller’s phone number (or name if stored in your Address Book) is displayed.

1. Open the flip and press the [SEND] key or the left soft key to answer an incoming call. If Any Key has been set as the answer mode (Menu 9.4.2), any key press will answer a call except for the [END] key or the right soft key.

n Notice

] To reject an incoming call, press and hold

the side keys on the left side of the phone.

] If Flip Open has been set as the Answer

Mode (Menu 9.4.2), you do not need to

press any key. You can answer the call simply by opening the flip.

2. End the call by closing the phone or pressing the [END] key.

n Notice

You can answer a call while using the Address Book or other menu features.

Vibrate Mode (Quick)

Vibrate Mode can be activated by pressing and holding down the [Star] key.

Signal Strength

If you are inside a building, being near a window may give you better reception. You can see the strength of your signal by the signal indicator on your phone’s display screen.

General Functions

Entering Text

You can enter alphanumeric characters by using the phone’s keypad. For example, storing names in the Address Book, writing a message, or creating scheduling events in the calendar all require entering text.

The following text input methods are available in the phone.

T9 Mode

This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter. The T9 mode automatically compares your keystrokes with an internal linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional ABC mode.

ABC Mode

This mode allows you to enter letters by pressing the key labeled with the required letter once, twice, three or four times until the letter is displayed.

123 Mode (Numbers Mode)

Type numbers using one keystroke per number. To change to 123 mode in a text entry field, press key until 123 mode is displayed.

A long press changes mode to 123.

Symbolic Mode

This mode allows you to enter special characters.

n Notice

The default setting on the phone is T9 disabled mode.

Changing the Text Input Mode

Change the text input mode by pressing

. You can check the current text input mode in the upper right corner of the screen.

Using the T9 Mode

The T9 predictive text input mode allows you to enter words easily with a minimum number of key presses. As you press each key, the phone begins to display the characters that it thinks you are typing based on a built-in dictionary.

+ 38 hidden pages