LG 47LY3DF User Manual

AAss aann EENNEERRGGYY SS TT AA RR
PP aarrtt nn ee rr LLGGEE UU ..SS ..AA..,,
IInncc .. hhaass ddee ttee rrmmiinn ee dd
tt hhaa tt tt hhiiss pp rroodd uu cctt
mmeeeett ss tt hh ee EENNEERRGG YY
SS TT AA RR gguuii ddee lliinn eess ffoo rr
eenneerrggyy eeffffii ccii eenncc yy ..

Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.

LCD TV

OWNER’S MANUAL

LCD TV MODELS

4477LLYY33DD
5522LLYY33DD

EENNEERRGGYY SSTT AARR ii ss aa ss ee tt ooff ppoowweerr-- ss aavv iinn gg
gguuiidd eellii nn eess iiss ss uu ee dd bbyy tthhee UU.. SS..
EEnn vv iirroonnmmeenn ttaall PPrroottee cctt iioonn AAggee nnccyy((EEPPAA))..

wwwwww..llgguussaa..ccoomm // wwwwww..llgg.. ccaa

1

WARNING / CAUTION

WARNING / CAUTION

To prevent fire or shock hazards, do not expose
this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to com­ply with the limits for a Class B digital device, pur­suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio fre­quency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or televi­sion reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment
and receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is con­nected.

- Consult the dealer or an experienced radio/TV
technician for help.

Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.

CAUTION

Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product

The lightning flash with arrowhead
symbol, within an equilateral triangle,

is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of elec­tric shock to persons.

The exclamation point within an equi-

lateral triangle is intended to alert the

user to the presence of important
operating and maintenance (servicing) instruc­tions in the literature accompanying the

appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELEC­TRIC SHOCK, DO NOT EXPOSE THIS PRO-

DUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV sys­tem installer’s attention to Article 820-40 of the
National Electric Code (U.S.A.). The code pro­vides guidelines for proper grounding and, in
particular, specifies that the cable ground shall
be connected to the grounding system of the
building, as close to the point of the cable

entry

as practical.

2

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.

Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong, The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

Only use attachments/accessories specified by
the manufacturer.

Unplug this apparatus when unused for long
periods of time.

Important safety instructions shall be provided with each apparatus. This information shall be given in a separate
booklet or sheet, or be located before any operating instructions in an instruction for installation for use and
supplied with the apparatus.

This information shall be given in a language acceptable to the country where the apparatus is intended to be used.
The important safety instructions shall be entitled “Important Safety Instructions”. The following safety

instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety
information may be included by adding statements after the end of the following safety instruction list. At the
manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be
placed immediately adjacent to that safety instruction:

1

2

3

4

5

6

7

8

3

Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

Never touch this apparatus or antenna during
a thunder or lighting storm.

Do not allow a impact shock or any objects to
fall into the product, and do not drop onto the
screen with something. (You may be injured or
the product can be damaged.)

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has exposed to rain or moisture,
does not operate normally, or has been
dropped.

CAUTION concerning the Power Cord :
Most appliances recommend they be placed
upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and
has no additional outlets or branch circuits.
Check the specification page of this owner's
manual to be certain.

Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates dam­age or deterioration, unplug it, discontinue use
of the appliance, and have the cord replaced

with an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.

Outdoor use marking :
WARNING - To reduce the risk of fire or elec-

tric shock, do not expose this appliance to rain
or moisture.

Wet Location Marking : Apparatus shall not be
exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall
be placed on or over apparatus.

GGRR OOUUNNDD IINN GG
Ensure that you connect the earth ground wire

to prevent possible electric shock. If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas pipes.

DDIISSCCOO NN NN EECC TTIINNGG DDEE VVIICC EE FFRROO MM MMAAIINNSS
Mains plug is the disconnecting device. The

plug must remain readily operable.

9

12

10

11

13

14

15

16

17

Power
Supply

Short-circuit

Breaker

4

CONTENTS

WARNING / CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . .

1

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURES OF THIS TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PREPARATION

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Attaching the TV to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Back Cover for Wire Arrangement

. . . . . . . . . . . . . . . . . . . . 11

Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 12

VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . 13

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

DVD Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Other A/V Source Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

USB In Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Audio Out Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

WATCHING TV / CHANNEL CONTROL

Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Turning on TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Volume Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Channel Setup

- Auto Scan (Auto Tuning)

. . . . . . . . . . . . . . . . . . . . . . . . . 36

- Add / Delete Channel (Manual Tuning)

. . . . . 37

- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

SimpLink

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Entry Modes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Photo List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Music List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

PICTURE CONTROL

Picture Size (Aspect Ratio) Control

. . . . . . . . . . . . . . . . . 50

Preset Picture Settings

- Picture Mode - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

- Color Tone - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Manual Picture Adjustment

- Picture Mode - User Mode

. . . . . . . . . . . . . . . . . . . . . 54

- Color Tone - User Mode . . . . . . . . . . . . . . . . . . . . . . . . . 55

XD - Picture Improvement Technology

. . . . . . . . . . . . . . . . . . . 56

Advanced - Cinema 3:2 Pulldown Mode . . . . . . . . . . . 57

Advanced - Black (Darkness) Level

. . . . . . . . . . . . . . . . . . . 58

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

SOUND & LANGUAGE CONTROL

Auto Volume Leveler ( Auto Volume) . . . . . . . . . . . . . . . . 60

Preset Sound Settings( Sound Mode) . . . . . . . . . . . . . . 61

Sound Setting Adjustment - User Mode

. . . . . . . . . . . . . 62

Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Stereo / SAP Broadcast Setup

. . . . . . . . . . . . . . . . . . . . . . . . . 65

TV Speakers On/ Off Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Audio Language

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

On-Screen Menus Language Selection . . . . . . . . . . . . 68

Caption Mode

- Analog Broadcasting System Captions

. . . . . . . . 69

- Digital Broadcasting System Captions

. . . . . . 71

- Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

MEDIAMEDIAMEDIA

HOST HOST HOST

MEDIA

HOST

5

TIME SETTING

Clock Setting

- Auto Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

- Manual Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74

Auto On/ Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Sleep Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Auto Shut-off Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Channel Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Movie & TV Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

External Input Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Key Lock

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Product Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Programming the Remote Control

. . . . . . . . . . . . . . . . . . . . 89

IR Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

External Control through RS-232C

. . . . . . . . . . . . . . . . . . 95

6

FEATURES OF THIS TV

■ If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.

■ Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However,

they have no adverse effect on the monitor's performance.

■ Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may pro-

duce some temporary distortion effects on the screen.

OOnn DDii ssppoossaa ll
a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general household waste.
c. Disposal of this product must be carried out in accordance to the regulations of your local authority.

is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.

LG TV with this logo displays Full HD(high-defini­tion) 1080p native resolution by receiving and pro­cessing a Full HD 1080p signal.

LG TV with this logo can play MP3 music from a
MP3 player, such as iPOD, and JPEG images from a
digital camera through the USB device.

With HDMI CEC support of LG’s audio/video device
connected to the HDMI (high-definition multimedia
interface), LG TV with this logo works easily with one
remote control.

It has three HDMI ports that connect audio and
video devices with one cable and produces the high­est quality digital images and sound.

R

TruSurround XT

Manufactured under license from Dolby Laboratories.
“

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.

LG's own special digital image generator, consisting
of a full digital image processor, six different main
picture quality factors.

R

TruSurround XT

PREPARATION

7

ACCESSORIES

1.5V

1.5V

Owner’s Manual Batteries

75 Ω Round Cable

Remote Control

Cable Management

Ensure that the following accessories are included with your porudct. If an accessory is missing, please con­tact the dealer where you purchased the product.

User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.

TV INPUT

STB

BACK

■

Slightly wipe stained spot on the exterior only with the polishing

cloth for the product exterior if there is stain or fingerprint on

surface of the exterior.

■

Do not wipe roughly when removing stain. Please be cautions of

that excessive power may cause scratch or discoloration.

Polishing Cloth

OOppttiioonn EExxttrraass

D-sub 15 pin Cable

Power Cord

CD Manual

LCD TV PLASMA TV

Owner's Manual

http://www.lgusa.com

www.lg.ca

Copyright© 2007 LGE,
All Rights Reserved.

PREPARATION

2- TV Bracket Bolts

2- TV Brackets,

2- Wall Brackets

Twist Holder

Arrange the wires with the twist holder.

This feature is not available for all models.

TV INPUT

STB

MENU

BRIG

H
T +

BRIGHT -

LINK

SIMP

TIMER

RATIO

BACK

APM

M/C EJECT

AUTO DEMO

CC

PREPARATION

8

PREPARATION

FRONT PANEL CONTROLS

■

Here shown may be somewhat different from your TV.

■

If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a

polishing cloth is included with your product, use it).

CH

VOL

ENTER

MENU

INPUT

Remote Control Sensor

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates green when the set is
switched on.

CH

VOL

ENTER

MENU

INPUT

CHANNEL
(

DD, EE

) Buttons

VOLUME
(

FF,GG

) Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

Intelligent Eye

Adjusts picture
according to the
surrounding
conditions.

CH

VOL

ENTER

MENU

INPUT

PREPARATION

9

USB Input

S-VIDEO Input

Connect S-Video out from
an S-VIDEO device.

AUDIO/VIDEO Input

Connect audio/video out­put from an external device
to these jacks.

AV IN 2V IN 2

L/L/MONOMONO

R

AUDIOAUDIO

VIDEOVIDEO

S-VIDEO

USB INUSB IN

BACK PANEL INFORMATION

■

Here shown may be somewhat different from your TV.

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

USB IN

HDMI/DVI IN

Connect a HDMI signal to 1, 2 or 3.
Or DVI (VIDEO)signal to the 1, 2 or 3 port
with a DVI to HDMI cable.

COMPONENT IN

Connect a component video/audio device to
these jacks.

RGB(PC)
AUDIO (RGB/DVI)

Connect the monitor output from a PC to the
appropriate input port.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

REMOTE CONTROL PORT

Connect your wired remote control.

AV (Audio/Video) IN 1

Connect audio/video output from an external
device to these jacks.

S-VIDEO

Connect S-Video out from an S-VIDEO device.

AUDIO OUT

Connect analog audio to various types of
equipment.

DIGITAL AUDIO OUT

Connect digital audio to various types of
equipment.

Note: In standby mode, these ports do not work.

ANTENNA/CABLE IN

Connect over-the air signals to this jack.
Connect cable signals to this jack.

Power Cord Socket

For operation with AC power.
Caution :Never attempt to operate the TV on DC

power.

AV IN 2

L/ MONO

R

AUDIO

VIDEO

S-VIDEO

USB IN

RGB

/DVI

ANTENNA/
CABLE IN

PREPARATION

10

PREPARATION

ATTACHING THE TV TO A WALL

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.

■

Insert the eye-bolts (or TV brackets and bolts) to
tighten the product to the wall as shown in the pic­ture. *Insert the eye-bolts and tighten them securely
in the upper holes.

Secure the wall brackets with the bolts (not provided
as parts of the product, must purchase separately )
to the wall. Match the height of the bracket that is
mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened
securely.

■

Use a sturdy rope (not provided as parts of the
product, must purchase separately) to tie the
product. It is safer to tie the rope so it becomes
horizontal between the wall and the product.

■

Here shown may be somewhat different from your TV.

SWIVEL STAND

■

After installing the TV, you can adjust the the TV set manually turning it to the left or right direction by 20
degrees to suit your viewing position.

20°

20°

■

This feature is not available for all models.

PREPARATION

11

Connect the cables as necessary.

To connect an additional equipment, see the
EEXXTTEERRNNAALL EEQQUUIIPPMMEENNTT SSEETTUUPP

section.

Install the

CCAABBLL EE MMAANNAAGG EEMMEENNTT

as shown.

2

Bundle the cables using the supplied

TTWWIISSTT

HHOOLLDD EERR

.

(This feature is not available for all models.)

3

Hold the

CC AABB LLEE MMAA NNAAGG EEMM EENNTT

with both

hands and pull it upward.

NOTE

GG

Do not hold the

CCAABBLL EE MMAANNAAGG EEMMEENNTT

when moving the product.

- If the product is dropped, you may be injured or the product may be broken.

How to remove the cable management

CABLE MANAGEMENT

1

BACK COVER FOR WIRE ARRANGEMENT

■

Here shown may be somewhat different from your TV.

TWIST HOLDER

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

USB IN

PREPARATION

12

PREPARATION

DESKTOP PEDESTAL INSTALLATION

For proper ventilation, allow a clearance of 4inches on each side from the wall.

VESA WALL MOUNTING

This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.

GG

Screw length needed depends on the wall mount used. For further information, refer to the VESA
Wall Mounting Instruction Guide.

NOTE

800mm

4 inches

4 inches

4 inches

4 inches

400mm

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

USB IN

PREPARATION

13

1. Antenna (analog or digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections. For optimum picture quality, adjust antenna direc­tion if needed.

2. Cable

ANTENNA/
CABLE IN

ANTENNA/
CABLE IN

Wall
Antenna
Socket

Outdoor
Antenna
(VHF, UHF)

Cable TV
Wall Jack

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Be careful not to bend the bronze wire
when connecting the antenna.

Copper Wire

The TV will let you know when the analog, cable, and digital channel scans are complete.

NOTE

ANTENNA/
CABLE IN

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

Antenna

UHF

Signal
Amplifier

VHF

ANTENNA OR CABLE CONNECTION

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you
do receive digital signals from a digital set-top box or other digital external device, refer to the figure as
shown below.

This TV supports HDCP (High-bandwidth Digital Contents Protection)protocol for Digital Contents.

Y L RPB PR

(DVI)

When connecting Component cable

1. How to connect

Connect the video outputs (Y, P

B, P

R

)

of the digital set

top box to the

CCOOMMPPOONNEENNTT IINN VVIIDDEEOO 11

jacks on
the set. Match the jack colors
(Y = green, P

B = blue, and PR = red).

Connect the audio output of the digital set-top box to
the

CCOOMMPPOONNEENNTT IINN AAUUDDIIOO 11

jacks on the set.

2. How to use

■

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top box.

)

■

Select

CCOOMMPPOONNEENNTT 11

input source with using the

IINNPPUUTT

button on the remote control.

■

If connected to

CCOOMMPPOONNEENNTT IINN 22

input, select

CCOOMMPPOO--

NNEENNTT 22

input source.

Signal

Component 1/2

Yes

Yes

Yes

Yes

Yes

HDMI/DVI1, 2 or 3

No

Yes

Yes

Yes

Yes

2

1

EXTERNAL EQUIPMENT SETUP

14

1

2

480i

480p

720p

10 8 0 i

10 8 0 p

EXTERNAL EQUIPMENT SETUP

(DVI)VI)

HDMI-DTV OUTPUT

When connecting HDMI cable

Connect the digital set-top box to

HHDDMM II//DD VVII IINN11

,

22

or

33

jack on the set.

No separated audio connection is necessary.

1. How to connect

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

)

■

Select

HHDDMMII11,HHDDMMII22 orHHDDMMII33

input source with using

the

IINNPPUUTT

button on the remote control.

■

If the digital set-top box player does not support Auto HDMI,
you need to set the output resolution appropriately.

2

1

EXTERNAL EQUIPMENT SETUP

15

1

EXTERNAL EQUIPMENT SETUP

16

EXTERNAL EQUIPMENT SETUP

When connecting HDMI to DVI cable

RGB

Connect the DVI output of the digital set-top box to the

HHDDMM II//DD VVII IINN11, 22

or

33

jack on the set.

Connect the audio output of the digital set-top box to the

AAUUDDIIOO((RRGGBB//DDVVII

))

jack on the set.

1. How to connect

■

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.

)

■

Select

HHDDMMII11,HHDDMMII22 orHHDDMMII33

input source with using the

IINNPPUUTT

button on the remote control.

2. How to use

2

1

1

2

3

RGB

DVI-DTV OUTPUT

L R

EXTERNAL EQUIPMENT SETUP

17

DVD SETUP

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPBP

R

Video output ports

on DVD player

Y

Y

Y

Y

P

B

Pb

B-Y

Cb

P

R

Pr

R-Y

Cr

Y L RPB PR

When connecting Component cable

Connect the video outputs (Y, PB, PR

)

of the DVD to

the

CCOO MMPPOONNEENNTT IINN VVIIDD EEOO11

jacks on the set.

Match the jack colors
(

Y = green, P

B = blue, and PR = red

)

.

Connect the audio outputs of the DVD to the
CCOO MMPPOONNEENNTT IINN AAUUDDIIOO 11

jacks on the set.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select

CCOOMMPPOONNEENNTT 11

input source with using the

IINNPPUUTT

button on the remote control.

■

If connected to

CCOOMMPPOONNEENNTT IINN 22

input, select

CCOOMM--

PPOONNEENNTT 22

input source.

■

Refer to the DVD player's manual for operating instruc­tions.

2

1

1 2

When connecting with an S-Video cable

HDMI-DVD OUTPUT

L R

S-VIDEO

AUDIO

Connect the S-VIDEO output of the DVD to the
SS--VVIIDDEEOO

input on the set.

Connect the audio outputs of the DVD to the

AAUUDDIIOO

input jacks on the set.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select

AAVV11

input source with using the

IINN PPUUTT

button on

the remote control.

■

If connected to

AAVV IINN 22

, select

AAVV22

input source.

■

Refer to the DVD player's manual for operating instructions.

When connecting HDMI cable

Connect the HDMI output of the DVD to the
HHDDMM II//DD VVII IINN11, 22 or33

jack on the set.

No separated audio connection is necessary.

1. How to connect

2. How to use

■

Select

HHDDMMII11,HHDDMMII22 orHHDDMMII33

input source with using

the

IINNPPUUTT

button on the remote control.

■

Refer to the DVD player's manual for operating instruc­tions.

■

If the DVD does not support Auto HDMI, you need to set
the output resolution appropriately.

2

1

2

1

18

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

1 2

1

VCR SETUP

When connecting with an antenna

■

To avoid picture noise (interference), leave an adequate distance between the VCR and TV

■

If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible

on the screen.

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

ANTENNA/ANTENNA/
CABLE INCABLE IN

Wall Jack

Antenna

Connect the RF antenna out socket of the VCR to the

AANNTTEENNNNAA//CCAABBLLEE IINN

socket on the set.

Connect the antenna cable to the RF antenna in socket of the VCR.

1. How to connect

■

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

■

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.

)

2. How to use

2

1

19

EXTERNAL EQUIPMENT SETUP

1

2

EXTERNAL EQUIPMENT SETUP

20

EXTERNAL EQUIPMENT SETUP

When connecting with a RCA cable

In the event that you connect
both Video and the S-Video
cables, only the S-Video will work.

CAUTION

L R

S-VIDEOVIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

ANTENNA/
CABLE IN

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

ANTENNA/
CABLE IN

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks between TV and
VCR. Match the jack colors(Video = yellow, Audio Left =
white,and Audio Right = red)

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.

)

■

Select

AAVV11

input source with using the

IINN PPUUTT

button on

the remote control.

■

If connected to

AAVV IINN 22

, select

AAVV22

input source.

If you have a mono VCR, con­nect the audio cable from the
VCR to the

AAUU DDIIOO

LL// MMOO NN OO

jack of the set.

NOTE

When connecting with an S-Video cable

Connect the S-VIDEO output of the VCR to the

SS--

VV II DDEE OO

input on the set. The picture quality is

improved; compared to normal composite (RCA cable

)

input.

Connect the audio outputs of the VCR to the

AAUUDDIIOO

input jacks on the set.

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the VCR.
(

Refer to the VCR owner’s manual.

)

■

Select

AAVV11

input source with using the

IINNPPUUTT

button on the

remote control.

■

If connected to

AAVV IINN 22

, select

AAVV22

input source.

1

2

1

1

1

2

EXTERNAL EQUIPMENT SETUP

21

OTHER A/V SOURCE SETUP

Camcorder

Video Game Set

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks between TV and

external equipment. Match the jack colors

.

(

Video = yellow, Audio Left = white, and Audio Right = red

)

1. How to connect

2. How to use

■

Select

AAVV22

input source with using the

IINNPPUUTT

button on

the remote control.

■

If connected to

AAVV IINN 11

input, select

AAVV11

input source.

■

Operate the corresponding external equipment.

1

AV IN 2

L/L/MONOMONO

R

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

USB INUSB IN

L R

VIDEO

1

EXTERNAL EQUIPMENT SETUP

22

EXTERNAL EQUIPMENT SETUP

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

GG

Check the image on your TV. There may be noise associated
with the resolution, vertical pattern, contrast or brightness in
PC mode. If noise is present, change the PC output to another
resolution, change the refresh rate to another rate or adjust
the brightness and contrast on the VIDEO menu until the
picture is clear. If the refresh rate of the PC graphic card can
not be changed, change the PC graphic card or consult the
manufacturer of the PC graphic card.

NOTE

RGBRGB

RGB OUTPUT

AUDIO

RGB

When connecting D-sub 15 pin cable

Connect the RGB output of the PC to the

RRGGBB

((

PPCC

))

jack on the set.

Connect the PC audio output to the

AAUUDDIIOO

((

RRGGBB//DDVVII

))

jack on the set.

1. How to connect

2. How to use

■

Turn on the PC and the set.

■

Select

RRGGBB--PPCC

input source with using the

IINNPPUUTT

button

on the remote control.

2

1

1 2

EXTERNAL EQUIPMENT SETUP

23

When connecting HDMI to DVI cable

GG

If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.

GG

If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the

best picture quality, adjust the output resolution of PC graphics card's output resolution to 1920x1080,
60Hz.

NOTE

DVI-PC OUTPUT

AUDIO

RGBRGB

Connect the DVI output of the PC to the

HHDDMMII//DDVVII IINN11, 22

or

33

jack on the set.

(Use the HDMI to DVI cable)

Connect the PC audio output to the

AAUUDDIIOO((RRGGBB//DDVVII

))

jack on the set.

1. How to connect

■

Turn on the PC and the set

■

Select

HHDDMMII11,HHDDMMII22 orHHDDMMII33

input source with using the

IINNPPUUTT

button on the remote control.

2. How to use

2

1

1

2

EXTERNAL EQUIPMENT SETUP

24

EXTERNAL EQUIPMENT SETUP

GG

Depending on the graphics card, DOS mode may

not work if a HDMI to DVI Cable is in use.

GG

Check the image on your TV. There may be noise

associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is
present, change the PC output to another resolu­tion, change the refresh rate to another rate or
adjust the brightness and contrast on the PIC­TURE menu until the picture is clear. If the refresh
rate of the PC graphic card can not be changed,
change the PC graphic card or consult the manu­facturer of the PC graphic card.

GG

Avoid keeping a fixed image on the screen for a

long period of time. The fixed image may become
permanently imprinted on the screen.

GG

The synchronization input form for Horizontal and

Vertical frequencies is separate.

NOTES

EXTERNAL EQUIPMENT SETUP

25

Supported Display Specifications (RGB/HDMI-PC

)

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.468 70.09

31.469 70.08

31.469 59.94

37.861 72.80

37.50 0 75 .0 0

35.156 56.25

37.879 60.31

48.077 72.18
46 .875 75 .0 0

48.363 60.00

56.476 70.06

60.023 75.02

47.776 59. 870

60.289 74.893

47.712 60.015

63.981 60.020

79.976 75.025

75.00 60.00

67.50 60.00

Resolution

720x400

1360x768

640x350

* RGB-PC mode only: 1280x768(H-60.289, V-74.893)

640x480

800x600

1024x768

Supported Display Specifications (HDMI-DTV

)

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.47 60.00

31.47 59.94

45.00 60.00

44.96 59.94

33.75 60.00

33.72 59.94

67.50 60.00

67.432 59 .939

27.00 24.00

26.97 23.94

33.75 30.00

33.71 29.97

Resolution

720x480

1280x720

1920x1080

1280x1024

1600x1200

1920x1080

1280x768

1280x768

Supported Display Specifications (Y, CB /PB,CR /P

R

)

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

15.73 60.00

15.73 59.94

31.47 59.94

31.47 60.00

45.00 60.00

44.96 59.94

33.75 60.00

37.72 59.94

67.50 60.00

67.432 59 .939

27.00 24.00

26.97 23.94

33.75 30.00

33.71 29.97

Resolution

1280x720

1920x1080

720x480

EXTERNAL EQUIPMENT SETUP

26

EXTERNAL EQUIPMENT SETUP

Screen Setup for PC mode

Overview

When the RGB input, of the set is connected to a PC Output, Select
RGB-PC with using the

IINNPPUUTT

button on the remote control.

When you change the resolution, select the proper resolution in
present input to see the best picture appearance.

Picture Mode

Color Temperature

XD

Advanced

Aspect Ratio

Picture Reset

Screen

G

Selection ( Gor ) leads you to
thescreen adjustment menu.

Picture Mode : User1

Color Temperature : Cool

XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen

Press the

MMEENNUU

button and then useDDor EEbutton

to select the

PPIICCTTUURREE

menu.

Press the

GG

button and then useDDor EEbutton to

select

SSccrreeeenn

.

Press the

GG

button to enter the screen adjustment

menu.

2

3

1

EXTERNAL EQUIPMENT SETUP

27

Resolution

Position

GG

Size

Phase

Reset

Move Prev

Resolution

Position

Size

Phase

Reset

GG

Initialize Settings.

Yes

No

Prev

Select

OK

RReessoolluuttiioonn

XGA (1024, 1280, 1360) isn’t
distinguished because of having

the same H/V Sync Time.
This function is you to select the
Default Sync Time.

PPoossiittiioonn

This function is to adjust picture
to left/right and up/down as you
prefer.

SSiizzee

This function is to minimize any
vertical bars or stripes visible on
the screen background. And the
horizontal screen size will also
change.

PPhhaassee

This function allows you to
remove any horizontal noise and
clear or sharpen the image of char­acters.

Use DDor EEbutton to select

RReessoolluuttiioonn, PPoossiittiioonn, SSiizzee

,

or

PPhhaassee

.

Press the

EENNTTEERR

button and then use

DD EE

FF GG

button to make appropriate adjustments.

■

The

PPhhaassee

adjustment range is

--1166~++1166

.

■

The

SSiizzee

adjustment range is

--3300~++3300

.

Press the

EENNTTEERR

button.

Adjustment for screen Resolution, Position, Size, Phase, Reset

Use DDor EEbutton to select

RReesseett

.

Press the

EENNTTEERR

button and then use

FF

or GGbutton to

select

YYeess

.

Press the

EENNTTEERR

button.

Initializing (Reset to original factory values

)

2

3

1

2

3

1

To initialize the adjusted values.

EXTERNAL EQUIPMENT SETUP

28

EXTERNAL EQUIPMENT SETUP

USB IN SETUP

AV IN 2

L/MONOMONO

R

AUDIOAUDIO

VIDEOVIDEO

S-VIDEO

USB INUSB IN

Connect the USB device to the

UUSSBB IINN

jacks on the

side of TV.

1. How to connect

1

2. How to use

■

After connecting the

UUSSBB IINN

jacks, you use the

function. (

GG

pp..4433

)

MEDIAMEDIA

HOST HOST

1

or

EXTERNAL EQUIPMENT SETUP

29

AUDIO OUT SETUP

Send the TV’s audio to external audio equipment via the Audio Output port.

GG

When connecting with external audio equipment, such as

amplifiers or speakers, please turn the TV speakers off.
(

GG

pp..6666

)

NOTE

GG

Do not look into the optical output port. Looking at the

laser beam may damage your vision.

GG

Block the SPDIF out(optical/coaxial) about the contents

with ACP(Audio Copy Protection) function.

CAUTION

Connect one end of the optical or coaxial cable to the
TV’s

OOPPTTIICCAALL

or

CCOOAAXXIIAALL

port of

DDIIGGIITTAALL AAUUDDIIOO

OOUUTT

.

Connect the other end of the optical or coaxial cable
to the digital audio input on the audio equipment.

Set the “TV Speaker option - Off” in the AUDIO menu.
(

GG

pp..6666

). See the external audio equipment instruction

manual for operation.

1. How to connect

2

3

1

1

2

L R

S-VIDEO

Analog

Digital

Connect audio outputs to the TV’s

AAUUDDIIOO OOUUTT

jacks.

Set the “TV Speaker option - Off” in the AUDIO menu.
(

GG

pp..6666

). See the external audio equipment instruction

manual for operation.

2

1

1