LG 42LM6200, 47LM6700, 47LM6200, 47LM6400 Owner’s Manual

OWNER’S MANUAL

LED LCD TV

Please read this manual carefully before operating your set and retain it for future reference.

32LM6200 47LM6250 47LM6400 42LM6700 47LM7600 42LM6200 55LM6250 55LM6400 47LM6700 55LM7600 47LM6200 60LM6450 55LM6700

55LM6200

P/NO : MFL67468133 (1205-REV02)

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2 LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital

Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

IMPORTANT SAFETY INSTRUCTIONS 3

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

yyDo not use this apparatus near water.

yyClean only with a dry cloth.

yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

<![if ! IE]>

<![endif]>ENGLISH

4 IMPORTANT SAFETY INSTRUCTIONS

<![if ! IE]>

<![endif]>ENGLISH

yyProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

yyOnly use attachments/accessories specified by the manufacturer.

yyUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

yyUnplug this apparatus during lightning storms or when unused for long periods of time.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyDo not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

yyKeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yyCAUTION concerning the Power Cord (Can differ by country):

It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and

if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

IMPORTANT SAFETY INSTRUCTIONS 5

yyWarning - To reduce the risk of fire or

yyAs long as this unit is connected to the AC

electrical shock, do not expose this product

wall outlet, it is not disconnected from the

to rain, moisture or other liquids. Do not

AC power source even if the unit is turned

touch the TV with wet hands. Do not install

off.

this product near flammable objects such

yyDo not attempt to modify this product in any

as gasoline or candles, or expose the TV to

way without written authorization from LG

direct air conditioning.

Electronics. Unauthorized modification could

void the user’s authority to operate this

product.

yyANTENNAS Outdoor antenna grounding

(Can differ by country):

yyDo not expose to dripping or splashing and

If an outdoor antenna is installed, follow

do not place objects filled with liquids, such

the precautions below. An outdoor antenna

as vases, cups, etc. on or over the apparatus

system should not be located in the vicinity

(e.g. on shelves above the unit).

of overhead power lines or other electric light

or power circuits, or where it can come in

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

yyGrounding

some protection against voltage surges

(Except for devices which are not grounded.)

and built-up static charges. Section 810 of

Ensure that you connect the earth ground

the National Electrical Code (NEC) in the

wire to prevent possible electric shock

U.S.A. provides information with respect to

(i.e. a TV with a three-prong grounded AC

proper grounding of the mast and supporting

plug must be connected to a three-prong

structure, grounding of the lead-in wire to

grounded AC outlet). If grounding methods

an antenna discharge unit, size of grounding

are not possible, have a qualified electrician

conductors, location of antenna discharge

install a separate circuit breaker. Do not try to

unit, connection to grounding electrodes and

ground the unit by connecting it to telephone

requirements for the grounding electrode.

wires, lightening rods, or gas pipes.

Antenna grounding according to the National

Power Supply

Electrical Code, ANSI/NFPA 70

Short-circuit

Antenna Lead in Wire

Breaker

yyDISCONNECTING DEVICE FROM THE MAIN

Ground Clamp

Antenna Discharge Unit

POWER

Electric Service

(NEC Section 810-20)

Mains plug is the disconnecting device. The

Equipment

Grounding Conductor

Ground Clamp

(NEC Section 810-21)

plug must remain readily operable.

Power Service Grounding

NEC: National Electrical Code

Electrode System

(NEC Art 250, Part H)

<![if ! IE]>

<![endif]>ENGLISH

6 IMPORTANT SAFETY INSTRUCTIONS

<![if ! IE]>

<![endif]>ENGLISH

yyCleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.

yyMoving

Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

yyVentilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

yyIf you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

yyDo not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

yyKeep the product away from direct sunlight.

yyNever touch this apparatus or antenna during a thunder or lightning storm.

yyWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

yyDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

yyDot Defect

The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

yyGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.

This generated sound does not affect the performance and reliability of the product.

yyTake care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

yyIf the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

DISPOSAL (Hg lamp only used in LCD TVs)

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.

Preventing “Image burn” or “Burn-in” on your TV screen

yyIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.

yyIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

yyAvoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

For USA and Canada

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

IMPORTANT SAFETY INSTRUCTIONS 7

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8 IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging

WARNING

Viewing Environment

yyViewing Time

-When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

yySome users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.

yyDo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

yy3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

yyIf you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yyIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents.

Symptoms which require discontinuation or refraining from watching 3D contents

yyDo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

yyWhen these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.

-Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

IMPORTANT SAFETY INSTRUCTIONS 9

CAUTION

Viewing Environment

yyViewing Distance

-Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

yyInfants / Children

-Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

-Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

-Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

yyTeenagers

-Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

yyElderly

-The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

yyMake sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. yyDo not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. yyUsing modified 3D glasses may cause eye strain or image distortion.

yyDo not keep your 3D glasses in extremely high or low temperatures. It will cause deformation. yyThe 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when

wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

10 TABLE OF CONTENTS

TABLE OF CONTENTS

2 LICENSES

2OPEN SOURCE SOFTWARE NOTICE

3IMPORTANT SAFETY INSTRUCTIONS

8Viewing 3D Imaging

10TABLE OF CONTENTS

11Installation Procedure

11 ASSEMBLING AND PREPARING

11 Unpacking

13Optional Extras

14Parts and buttons

16Lifting and moving the TV

17Setting up the TV

17- Attaching the stand

18- Mounting on a table

19- Tidying cables

20- Mounting on a wall

21MAKING CONNECTIONS

21Connecting to an antenna or cable

22Connecting to a HD receiver, DVD, or VCR player

22- HDMI Connection

23- DVI to HDMI Connection

24- Component Connection

25- Composite Connection

26Connecting to a PC

26 - HDMI Connection, DVI to HDMI Connection or RGB Connection

28Connecting to an Audio System

28- Digital Optical Audio Connection

29Connecting to a USB

30 REMOTE CONTROL

30Magic Remote Control Functions

31- Registering Magic Remote Control

31- How to use Magic Remote Control

31- Precautions to Take when Using the Magic Remote Control

32WATCHING TV

32Turning the TV on for the first time

33Using the User guide

34SPECIFICATIONS

40 MAINTENANCE

40 Cleaning Your TV

40 - Screen, frame, cabinet and stand

40 - Power cord

40 TROUBLESHOOTING

NOTE

yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this

manual.

yyThe available menus and options may differ from the input source or product model that you are using.

yyNew features may be added to this TV in the future.

ASSEMBLING AND PREPARING 11

Installation Procedure

1Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

4Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span.

yyAny damages or injuries by using unapproved items are not covered by the warranty. yyIn case of some model, the thin film on screen is a part of TV, So don’t take it off.

NOTE

yyThe items supplied with your product may vary depending on the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.

yyUse an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.

AA

*A 10 mm (0.39 inches) *B 18 mm (0.7 inches)

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

<![if ! IE]>

<![endif]>ENGLISH

					Owner’s manual				Cable holder
Magic Remote Control,
Batteries (AA)									(Depending on model)
(See p.30)									(See p.19)

Stand Screws		Component video cable				Composite video cable
8 EA, M4 x 20		(See p.24)				(See p.24, 25)
(See p.17)

Cinema 3D Glasses		Stand Body		Stand Base
The number of 3D glasses		(See p.17)		(See p.17)
may differ depending on the
model or country.

Polishing cloth		Power Cord		Wall mount inner spacers
(Depending on model)		(Depending on model)		4 EA
Use this to remove dust				(Depending on model)
from the cabinet.				(See p.20)

Desk-mount Screw		Bracket Screw		Desk-mount Cable
2 EA		M4 x 8, 2 EA		2 EA
(Depending on model)		(Depending on model)		(Depending on model)
(See p.18)		(See p.18)		(See p.18)

ASSEMBLING AND PREPARING 13

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.

These devices only work with certain models.

AN-MR300		AG-F2**, AG-F3**
Magic remote control		Cinema 3D glasses

The model name or design may be changed manufacturer’s circumstances or policies.

<![if ! IE]>

<![endif]>ENGLISH