LG 32LJ548D Owner’s Manual

OWNER’S MANUAL

Safety and Reference

LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

MFL69446163

www.lg.com

P/NO : MFL69446163 (1701-REV00)

India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.)

ATTENTION:

ENGLISH

This product is qualied for the BEE Star rating in the ‘Home’ Mode.

The Objectives of Star Labeling Program is designed to promote energy ecient products and practices.

When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.

• Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.

• Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the stated

energy consumption. To reset the television to Star rating qualied settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under the ‘Set-up’ menu.

ENGLISH

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• Do not place the TV and/or remote control in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that

produce heat

- Near kitchen counters or humidiers where they can easily be

exposed to steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in re, electric shock, malfunction or product deformation.

• Do not place the product where it might be exposed to dust. This may cause a re hazard.

• Mains Plug is the TV connecting/disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.

• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust o. You may be electrocuted due to excess moisture.

• Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.

• Insert power cable plug completely into wall socket otherwise if not secured completely into socket, re ignition may break out.

• Ensure the power cord does not come into contact with hot objects such as a heater. This may cause a re or an electric shock hazard.

• Do not place a heavy object, or the product itself, on power cables. Otherwise, this may result in re or electric shock.

• Bend antenna cable between inside and outside building to prevent rain from owing in. This may cause water damaged inside the Product and could give an electric shock.

• When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /re hazard.

• Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in re due to overheating.

• Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

• Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suocation. Keep it out of the reach of children.

• Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.

• Dispose of used batteries carefully to ensure that a small child does not consume them. Please seek Doctor- Medical Attention immediately if child consumes batteries.

• Do not insert any metal objects/conductors (like a metal chopstick/cutlery/screwdriver) into the end of power cable while the power plug is plugged into wall socket. Additionally, do not touch the power plug right after unplugging from the wall socket. You may be electrocuted.

• Do not put or store inammable substances near the product. There is a danger of combustion/explosion or re due to careless handling of the inammable substances.

• Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inammable objects such as paper and matches. Children must pay particular attention. Electrical shock, re or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

• Do not spray water on the product or scrub with an inammable substance (thinner or benzene). Fire or electric shock accident can occur.

• Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged.

• Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted.

ENGLISH

• Never touch the wall outlet when there is leakage of gas, open the windows and ventilate. It may cause a re or a burn by a spark.

• Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.

• If any of the following occur, unplug the product immediately and contact your local service centre.

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in re or electric shock.

• Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time. Accumulated dust can cause re hazard and insulation deterioration can cause electric leakage/ shock/re.

• Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the apparatus.

• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

• If water enters or comes into contact with TV, AC adapter or power cord please disconnect the power cord and contact service centre immediately. Otherwise, this may result in electric shock or re.

• Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in re, electric shock, malfunction or product deformation.

• Never Disassemble the AC adapter or power cord. This may result in re or electric shock.

• Be careful in handling the adapter to prevent any external shocks to it. An external shock may cause damage to the adapter.

• Make sure the power cord is connected securely to the power plug on the TV.

CAUTION

• Install the product where no radio wave occurs.

• There should be enough distance between an outside antenna and

power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock.

• Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or ip over, which may cause injury or damage to the product.

• If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

• If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), x it carefully so as not to drop.

• Only use the attachments / accessories specied by the manufacturer.

• When installing the antenna, consult with a qualied service technician. If not installed by a qualied technician, this may create a re hazard or an electric shock hazard.

• We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision.

• Only use the specied type of battery. This could cause damage to the remote control.

• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.

• Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight, open replace and electric heaters.

• Signal from Remote Control can be interrupted due to external/ internal lighting eg Sunlight, uorescent lighting. If this occurs turn o lighting or darken viewing area.

• When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

• Do not turn the product On/O by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock.

• Please follow the installation instructions below to prevent the product from overheating.

- The distance between the product and the wall should be more

than 10cm.

- Do not install the product in a place with no ventilation (e.g., on

a bookshelf or in a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

This may result in re.

• Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not aect the operation or performance of the product.

ENGLISH

• Periodically examine the cord of your appliance, and if its

appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

• Prevent dust collecting on the power plug pins or outlet. This may cause a re hazard.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

• Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may causedamage to screen.

• Avoid touching the screen or holding your nger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen.

• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn o this unit by SWITCH.

• When unplugging the cable, grab the plug and unplug it, by pulling at the plug.

• Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.

• When moving the product, make sure you turn the power o rst. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a re hazard or cause electric shock.

• When moving or unpacking the product, work in pairs because the product is heavy. Otherwise, this may result in injury.

• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Do not use high voltage electrical goods near the TV (e.g. electric mosquito-swatter). This may result in product malfunction.

• When cleaning the product and its components, unplug the power rst and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in re, electric shock or product damage (Deformation, corrosion or breakage).

Preparing

NOTE

• Image shown may dier from your TV.

• Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

• The available menus and options may dier from the input source or product model that you are using.

• New features may be added to this TV in the future.

• The items supplied with your product may vary depending on the

model.

• Product specications or contents of this manual may be changed without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not t into your TV’s USB port.

• Use a certied cable with the HDMI logo attached.

• If you do not use a certied HDMI cable, the screen may not display

or a connection error may occur. (Recommended HDMI Cable Types)

- High-Speed HDMI®/

• How to use the ferrite core (Depending on model)

- Use the ferrite core to reduce the electromagnetic interference in

the power cord. Wind the power cord on the ferrite core once.

[Wall side]

10 cm (+ / -2 cm)

CAUTION

• Do not use any unapproved items to ensure the safety and product life span.

• Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s warranty.

• Some models have a thin lm attached on to the screen and this must not be removed.

• When attaching the stand to the TV set, place the screen facing down on a cushioned table or at surface to protect the screen from scratches.

• Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.

*A < 10 mm

18 mm

cable (3 m or less)

cable with Ethernet (3 m or less)

[TV side]

ENGLISH

• Make sure to wring any excess water or cleaner from the cloth.

• Do not spray water or cleaner directly onto the TV screen.

• Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

• When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel. (Depending on model)

Maintenance

Cleaning your TV

Clean your TV regularly to keep the best performance and to extend the product lifespan.

• Make sure to turn the power off and disconnect the power cord

and all other cables first.

• When the TV is left unattended and unused for a long time,

disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.

Screen, frame, cabinet, and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

• Avoid touching the screen at all times, as this may result in

damage to the screen.

• Do not push, rub, or hit the surface with your fingernail or a sharp

object, as this may result in scratches on the screen and image distortions.

• Do not use any chemicals as this may damage the product.

• Do not spray liquid onto the surface. If water enters the TV, it may

result in fire, electric shock, or malfunction.

Lifting and moving the TV

(Image may vary depending on models)

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV in the box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame rmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV by hand, hold the TV as shown in the

following illustration.

• When transporting the TV, do not expose the TV to jolts or excessive vibration.

• When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

• Do not apply excessive pressure to cause exing / bending of frame chassis as it may damage screen.

• When handling the TV, be careful not to damage the protruding buttons.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

CAUTION

• Avoid touching the screen at all times, as this may result in damage to the screen.

• Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur.

ENGLISH

Using the button

Adjusting the menu

(Depending on model)

You can simply operate the TV functions, using the button.

Basic functions

When the TV is turned off,

Power On (Press)

Power O

(Press and hold)

Volume Control

Programmes Control

Place your finger on the Joystick button and Press it once and release it.

When the TV is turned on, place your finger on the joystick button and press it

once for few seconds and release it. (However, if the Menu button is on the screen, pressing and holding the joystick button will let you exit the Menu.

If you place your finger over the joystick button and move it left or right, you can adjust

the volume level you want.

If you place your finger over the Joystick button and move it forward or backward, you can scrolls through the saved programmes you want.

(Depending on model)

When the TV is turned on, press the the Menu items using the button.

Turns the power o.

Accesses the settings menu.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

Scrolls through the saved programmes.

Adjusts the volume level.

button one time. You can adjust

Power On (Press) Power O (Press and hold) Menu Control (Press Menu Selection (Press and Hold

1 If the Menu button is on the screen, pressing and holding the button

will let you exit the Menu.

2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

)

ENGLISH

Mounting on a table

(*Image may vary depending on models)

NOTE

Size of the table should be sufficient enough to accommodate TV base stand.

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources of heat, as this may result in re or other damage.

10 cm

Using the kensington security system

This feature may vary depending on model

• Image shown may differ from your TV.

The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table.

Securing the TV to a wall

(Features may vary depending on models.)

WARNING

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)

• If a television is not positioned in a suciently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using cabinets or stands recommended by the manufacturer of»

the television.

Only using furniture that can safely support the television.»

the television.

Ensuring the television is not overhanging the edge of the »

supporting furniture.

Not placing the television on tall furniture (for example, cupboards»

or bookcases) without anchoring both the furniture and the television to a suitable support.

Not standing the televisions on cloth or other materials placed»

between the television and supporting furniture.

Educating children about the dangers of climbing on»

furniture to reach the television or its controls.

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back

of the TV.

• If there are bolts inserted at the eye-bolts position, remove the bolts rst.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the at surface.

CAUTION

• Make sure that children do not climb on or hang on the TV.

NOTE

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

ENGLISH

Mounting on a wall

(Image may vary depending on models)

Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the oor. When you attach the TV to other building materials, please contact qualied personnel. LG recommends that wall mounting be performed by a qualied professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing xed wall mounts.

10 cm

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

10 cm

CAUTION

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

NOTE

• Do not use a sharp object when you detached the cable cover. This could damage the cable or the cabinet. It may also cause personal harm.

• Use the screws that are listed on the VESA standard screw specifications.

• The wall mount kit includes an installation manual and necessary parts.

• The wall mount bracket in not provided along with the TV set.

• The length of screws may differ depending on the wall mount.

Make sure to use the proper length.

• For more information, refer to the manual supplied with the wall mount.

CAUTION

• Disconnect the power cord first, and then move or install the TV. Otherwise electric shock may occur.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• The Screw Cover will protect the opening from accumulating dust and

dirty.

• If you install the TV on a ceiling or slanted wall, it may fall and Result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.

• Do not over tighten the screws as this may cause damage to the TV And void your warranty.

•

Use the screws and wall mounts that meet the VESA standard. Any Damages or injuries by misuse or using an improper accessory are Not covered by the manufacture’s warranty.

Separate purchase (Wall mounting bracket)

32/43LJ51**

Model

VESA (A x B) (mm) 200 x 200 300 x 300

Standard screw M6 M6

Number of screws 4 4

32/43LJ52**

32/43LJ53**

32/43LJ54**

49LJ51**

49LJ52**

• When installing the wall mounting bracket, use the adhesive label provided. The adhesive label will protect the opening from accumulating dust and dirt. (Only when the item of the following form is provided)

Provided item

Adhesive label

• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the inux of dust and insects. (Depending on model)

Stand hole

ENGLISH

Connections (notications)

Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

NOTE

• The external device connection may dier from the model.

• Connect external devices to the TV regardless of the order of the

TV port.

• If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.

• Refer to the external equipment’s manual for operating instructions.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

• In PC mode, some resolution settings may not work properly depending on the graphics card.

Adapter connection

(Depending on model)

• Please be sure to connect the TV to the AC-DC power adapter before connecting the TV’s power plug to a wall power outlet.

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided.

NOTE

• Supported HDMI Audio format :

DTS (44.1kHz / 48kHz),

Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), PCM (32 KHz, 44.1 KHz, 48 KHz, 96 KHz, 192 KHz) (Depending on model)

Listening to the Radio

(Only LJ523*) 1 Press (HOME) and select FM Radio. 2 Listen to the radio by using the following menus/buttons.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplier properly to

improve the image quality.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied.

• Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,

HE-AAC

(Only LJ523*) Connect the terrestrial antenna to TV ANTENNA IN to listen to crisp radio without having to install a separate antenna. Connect an FM antenna cable to the radio antenna port.

• When connecting the FM antenna cable, straighten the cable completely and set it in a position that delivers good reception.

• Improving radio broadcast reception : If the reception is poor in stereo mode, press the (Forced Mono) button on your remote control. This may improve the radio

reception.

No. Description

Current time.

Current preset number.

Audio mode. (Stereo, Mono, Forced Mono)

Current radio frequency.

Available buttons on the remote control.

ENGLISH

Remote control

(Depending on model)

(Some buttons and services may not be provided depending on models or regions.)

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.

CAUTION

• Do not mix old and new batteries, as this may damage the remote control.

• In Analogue TV and some countries, some remote control buttons may not work.

• The remote control will not be included for all sales market.

Make sure to point the remote control toward the remote control sensor on the TV.

and ends to the label inside the

1 1

Turns radio mode on or o. If radio mode is turned o, the

screen switches to the previously viewed screen.

(INPUT) Changes the input source.

Number buttons Enters numbers.

Accesses the saved programme list.

Adjusts the volume level.

Accesses your favourite programme list.

Shows programme guide.

, (MUTE) Mutes all sounds.

Scrolls through the saved programmes. Moves to the previous or next screen.

3 3

(POWER) Turns the TV on or o.

, Selects Radio, TV and DTV programme.

Recalls your preferred subtitle in digital mode.

(Depending on model)

Switches the BOLLYWOOD sound mode.

(Depending on model)

Audio descriptions function will be enabled.

Resizes an image.

Views the information of the current programme and

screen.

(Depending on model)

Returns to the previously viewed programme.

(Depending on model)

Used to start or stop Mosquito Away operation.

* The Mosquito Away performance can be different depending on the

customer’s environment. For detail, refer Disclaimer. (See p. 23) (Depending on model)

(Depending on model)

Teletext buttons ( ) These buttons are used for

(Depending on model)

teletext.

(HOME) Accesses the Home menu.

(Settings) Accesses the Settings menu

Accesses the Quick menus. Navigation buttons (up/down/left/right) Scrolls through menus or options.

Selects menus or options and conrms your input.

Returns to the previous level.

Clears on-screen displays and returns to TV viewing.

(Depending on model)

Audio descriptions function will be enabled.

Views the information of the current programme and

screen.

, Starts to record and displays record menu.

(Only Time Machine

Returns to LIVE TV. Control buttons ( Coloured buttons

functions in some menus.

Ready

supported model)

) Controls media contents.

These access special

ENGLISH

Game remote functions

Licenses

(Depending on model)

(Image may vary depending on models)

(Some buttons and services may not be provided depending on models or regions.)

Game Hot Key works only in normal TV viewing mode. (Not in USB Playback)

1 2

(POWER) Turns TV on or o.

(HOME) Accesses the Home menu.

(Game) Opens Game menu.

(Input list) Changes the input source.

(Back) Returns to the previous level.

Clears on-screen displays and returns to TV viewing.

Adjusts the volume level.

Scrolls through the saved programmes.

Navigation buttons (up/down/left/right) Scrolls through

menus or options.

OK Game selection / Game play

Supported licenses may dier by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

This DivX Certied® device has passed rigorous testing to ensure it plays DivX® video.

To play purchased DivX movies, rst register your device at vod.divx. com. Find your registration code in the DivX VOD section of your device setup menu.

DivX Certied® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certied® and associated logos are trademarks of DivX, LLC and are used under license.

Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others available at [www.divx.com/patents].

(Only LJ51*T, LJ52*T, LJ53*T, LJ54*T, LJ51*D, LJ52*D, LJ53*D, LJ54*D)

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

ENGLISH

Open source software notice information

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.

lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This oer is valid for three (3) years from the date on which you purchased the product.

Settings

Automatically Setting Up Programme

(Settings) Programmes Auto Tuning

Automatically tunes the programmes.

• If Input Source is not connected properly, programme registration may not work.

• Auto Tuning only nds programmes that are currently broadcasting.

• If Lock System is turned on, a pop-up window will appear asking for password.

To select Picture Mode

(Settings) Picture Picture Mode Settings Pic ture

Mode

Select the picture mode optimized for the viewing environment or the programme.

• Vivid : Heightens contrast, brightness and sharpness to display vivid images.

• Standard : Displays images in standard levels of contrast, brightness and sharpness.

• Eco/APS : [Depending on model] The Energy Saver feature changes settings on the TV to reduce power consumption.

• Cinema/Game : Displays the optimum picture for movie, game.

• Soccer/Cricket : [Depending on model]

Optimizes the video image for high and dynamic actions by emphasizing primary colours such as white, grass, or sky blue.

•

Expert 1, 2 : Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This is the adjustment menu provided for ISF-certied picture tuning professionals. (ISF logo can only be used on ISF-certied TVs.) ISFccc: Imaging Science Foundation Certied Calibration Control

• Depending on input signal, available range of picture modes may dier.

• Expert mode is for picture tuning professionals to control and ne-tune using a specic image. For normal images, the eects may not be dramatic.

• The ISF function is only available on some models.

• Changing Picture Mode may modify Energy Saving and Motion

Eye Care settings, which can also aect energy consumption.

Fine-tuning Picture Mode

(Settings) Picture Picture Mode Settings

This feature allows you to adjust the selected picture mode in detail.

• Backlight : Controls the level of screen brightness by adjusting the backlight. The closer to 100, the brighter the screen.

• Contrast : Adjusts the contrast of the bright and dark areas of the picture. The closer to 100, the higher the contrast.

• Brightness : Adjusts the overall screen brightness. The closer to 100, the brighter the screen.

• Sharpness : Adjusts the sharpness of the image. The closer to 50, the sharper and clearer the image.

• Colour : Tones down or up the colours displayed on the screen. The closer to 100, the deeper the colour.

• Tint : Adjusts the colour balance between red and green displayed on the screen. The closer to Red 50, the more red the colour will be. The closer to Green 50, the more green the colour will be.

• Colour Temperature : Adjusts the colour temperature from cold to warm.

• Depending on input signal or other picture settings, the range of detailed items for adjustment may dier.

ENGLISH

To set advanced controls

(Settings) Picture Picture Mode Settings Advanced

Controls / Expert Controls

Calibrates the screen for each picture mode; or adjusts picture settings for a special screen.

• Dynamic Contrast : Adjusts the contrast to the optimal level according to the brightness of the image.

• Dynamic Colour : Adjusts colours to make the image appear in more natural colours.

• Preferred Colour : Adjust the colours of skin, grass and sky to your personal preferences.

• Gamma : Sets the gradation curve according to the output of picture signal in relation to the input signal.

• Colour Gamut : Selects the range of colours that can be expressed.

• Edge Enhancer : Shows clearer and distinctive yet natural edges

of the video.

• Colour Filter : Filters a specic colour spectrum in RGB colours to ne-tune colour saturation and hue accurately.

• White Balance : Adjusts the overall tone of the screen as desired.

• Colour Management System : This is a system that experts use

when they adjust colour with a test pattern. They can select from six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow) without aecting other colours. For normal images, adjustments may not result in noticeable colour changes.

• Depending on input signal or other picture settings, the range of detailed items for adjustment may dier.

To set additional picture options

(Settings) Picture Picture Mode Settings Pic ture

Options

Adjusts detailed setting for images.

• Noise Reduction : Eliminates noise in the picture.

• MPEG Noise Reduction : Eliminates noise generated while

creating digital picture signals.

• Black Level : Adjusts the brightness and contrast of the screen to suit the black level of the input picture by using the blackness (black level) of the screen.

• Real Cinema : Optimizes the screen for movie viewing.

• Motion Eye Care : Automatically adjusts brightness and reduces

image blur based on image data to reduce eyestrain.

• Depending on input signal or other picture settings, the range of detailed items for adjustment may dier.

Resetting picture settings

(Settings) Picture Picture Mode Settings Pic ture

Reset

Resets picture settings that the user customizes. Each picture mode is reset. Select the picture mode you wish to reset.

To use Energy Saving feature

(Settings) Picture Energy Saving

Reduces power consumption by adjusting screen brightness.

• Auto : [Depending on model] The TV sensor detects the ambient lighting and automatically adjusts the screen brightness.

• Off : Turns o the Energy Saving mode.

• Minimum / Medium / Maximum : Applies the pre-set Energy

Saving mode.

• Screen Off : Screen is turned o and only sound is played. Press any button except Power button on the remote control to turn the screen back on.

• Depending on the Energy Saving (Auto/Maximum), you may not be able to adjust the Backlight.

In this case, navigate to Saving and set to Off or Minimum.

To use Eye Comfort Mode feature

(Settings) Picture Eye Comfort Mode

If you turn this option on, colour temperature will be automatically adjusted to reduce eye strain.

• On : Automatically adjusts the screen color temperature.

• Off : Turns o the Eye Comfort Mode.

Capturing the TV screen

(Depending on model)

You can capture your TV screen.

1 Connect the USB device to the USB port on the side or back of the TV. 2 During watch the live broadcast, press the 3 Press the SCREEN CAPTURE button left corner of the screen. (or

press the (Red) button on the Remote Control.)

4 Screen-captured image will be saved in connected USB device.

• Applies to digital broadcasting.

• You can view screen-captured images in the My Media ’Screen

Capture’ Folder.

• The captured image is saved in the same size as the original image.

(Settings) Picture Energy

OK button. (Only DTV)

ENGLISH

Selecting Sound Mode

(Settings)

Adjusts TV audio to an optimal level based on a selected sound mode.

• Standard : Optimizes the sound for all types of content.

• Clear Voice : Boosts voice clarity from the TV.

• Music/Bollywood : [Depending on model] Optimizes the sound

for music.

• Cinema : Optimizes the sound for cinemas.

• Soccer/Cricket : [Depending on model] Optimizes the sound for

sports.

• Game : Optimizes the sound for gameplay.

Sound

Sound Mode Settings

Sound Mode

To synchronize audio and video

(Settings)

[Depending on model]

Synchronizes video and audio directly when they do not match. If you set AV Sync Adjustment to On, you can adjust the sound output (TV speakers or External Speaker) to the screen image.

• If you select the Bypass, Outputs the broadcast signals or the sound from external devices without any audio delay. The audio may be output before the video because of the time the TV takes to process the video input.

Sound

AV Sync Adjustment

Adjusting audio balance

(Settings)

Adjust the volume of the left and right speakers.

Using the Sound Eect function

(Settings)

The user can select various sound eects.

• Virtual Surround : Enjoy an immersive soundscape with the virtual multi-channel surround sound eect.

• Equalizer : Set the desired sound by adjusting the equalizer directly.

• Reset : Reset the sound eect settings.

• This is only available if Sound Mode is set to Standard.

To use TV Speaker

(Settings)

[Depending on model]

Sound is output through the TV speaker.

To use Headphone

(Settings)

[Depending on model]

Sound is output through the headphone connected to the earphone/ headphone port.

Sound

Sound Mode Settings

Sound Out

Internal TV Speaker

Wired Headphones

Balance

Using Music Catch

[Depending on model]

It is a function you can use to record the music from the TV any time.

1 Connect the USB device to the USB port on the side or back of the TV. 2 During watch the Live broadcast, press the 3 Press the START MUSIC RECORDING button right corner of the

screen.

4 If you want to stop the music recording, press the STOP MUSIC

RECORDING button.

• If there is not enough remaining space in the USB device, Music Catch may not work properly. To use Music Catch function, you need the USB device which has at least 100 MB.

• Stored les can be viewed in the My Media Folder, and you can open them on your PC or portable devices.

• Recorded les are stored in .wav format.

• If you switch apps or input during recording, recording

automatically ends and the recorded les will be saved.

• With the Music Catch function, you can play a music for up to two hours.

• If the USB device is removed by force while music recording, the music recording will not complete properly.

OK button.

’Music Catch’

+ 35 hidden pages