<![endif]>ENGLISH
IPS LED MONITOR
Please read this manual carefully before operating your set and retain it for future reference.
IPS LED MONITOR MODEL
22MP55VQ
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
3 |
LICENSE |
22 |
TROUBLESHOOTING |
||
4 |
|
|
|
|
|
ASSEMBLING AND PREPAR- |
24 |
SPECIFICATIONS |
|||
|
ING |
|
|
|
|
|
24 |
22MP55VQ |
|||
4 |
Unpacking |
||||
25 |
Preset Modes (Resolution) |
||||
5 |
Parts and buttons |
25 |
Indicator |
6Moving and Lifting the Monitor
7 |
Setting up the Monitor set |
26 |
PROPER POSTURE |
||
7 |
- Attaching the Stand Base |
||||
|
|
|
|||
26 |
Proper posture for using the Monitor set. |
||||
7 |
- Detaching the Stand Base |
8- Mounting on a table
8- Adjusting the angle
9 - Using the Kensington locking device
10- Mounting on a wall
11USING THE MONITOR SET
11Connecting to a PC
11- D-SUB connection
11- DVI-D connection
11- HDMI connection
12Connecting to AV Devices
12- HDMI connection
12Connecting to External Devices
12- Peripheral device connection
14 CUSTOMIZING SETTINGS
15Customizing Settings
15- Menu Settings
16-Picture
17-Color
18-Display
18-Audio
19-Others
20READER Setting
21SUPER ENERGY SAVING
LICENSE 3
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
*This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
*To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 ASSEMBLING AND PREPARING
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
CD(Owner's Manual) / |
D-SUB Cable |
DVI-D Cable |
Card |
(This cable is not |
(This cable is not |
|
included in all |
included in all |
|
countries.) |
countries.) |
Power Cord |
Stand Base |
Stand Body |
CAUTION
yyDo not use any unapproved accessories to ensure the safety and product life span.
yyAny damages or injuries by using unapproved accessories are not covered by the warranty.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
ASSEMBLING AND PREPARING 5
<![endif]>ENGLISH
Power Indicator yyLightingOn:Turnedon yyLightingOff: Turned off
(Power Button)
Button (See p.14)
Connection panel (See p.11~13)
<![endif]>ENGLISH
6 ASSEMBLING AND PREPARING
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size.
yyIt is advisable to place the monitor in the original box or packing material before attempting to move it.
yyBefore moving or lifting the monitor, disconnect the power cord and all cables.
yyHold the top and bottom of the monitor frame firmly. Do not hold the panel itself.
yyWhen holding the monitor, the screen should face away from you to prevent it being scratched.
yyWhen moving the monitor, avoid any strong shock or vibrations to the product.
yyWhen moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways.
CAUTION
yyAs far as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.
ASSEMBLING AND PREPARING 7
1Place the Monitor set with the screen side down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
21 Attach the Stand Body to the monitor set.
2 Attach the Stand Base to Stand Body.
3 Tighten the screw to the right.
1Place the Monitor set with the screen side down on a flat and cushioned surface.
21 Pull out the Stand Body and Stand Base from the monitor set.
2 Turn the screw to the left.
3 Pull out the Stand Base.
Stand Body
Stand Body
Stand Base
Stand
<![endif]>ENGLISH
<![endif]>ENGLISH
8 ASSEMBLING AND PREPARING
1Lift the monitor and place it on the table in an upright position.
Install at least 10 cm away from the wall to ensure sufficient ventilation.
1Place the monitor mounted on the stand base in an upright position.
2Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 25° backwards for a comfortable viewing experience.
Rear Side |
Front Side |
2Connect the Power cord to the monitor, then plug the power cord into the wall outlet.
3Press the (Power) button on the front of the monitor to turn on the monitor.
CAUTION
yyUnplug the power cord prior to moving or installing the monitor. There is risk of electric shock.
ASSEMBLING AND PREPARING 9
WARNING
When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.
Do not touch or press the screen when adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.
The connector for the Kensington lock is located on the rear of the monitor.
For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com.
Connect the monitor to the table with the Kensington lock cable.
NOTE
yyUsing the Kensington lock is optional. The accessories can be purchased at your local electronics store.
<![endif]>ENGLISH