<![endif]>ENGLISH
LED LCD MONITOR
Please read this manual carefully before operating your set and retain it for future reference.
LED LCD MONITOR MODEL
20M35TD
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
3ASSEMBLING AND PREPARING
3Unpacking
4Parts and buttons
5Setting up the Monitor set
5- Attaching the Stand Base
5- Detaching the Stand Base 6 - Mounting on a table
6 - Adjusting the angle
7 - Using the Kensington locking device
8 - Mounting on a wall
19 TROUBLESHOOTING
21 SPECIFICATIONS
2120M35TD
22Preset Modes (Resolution)
22Indicator
9USING THE MONITOR SET
9Connecting to a PC
9- D-SUB connection
9- DVI-D connection
11 CUSTOMIZING SETTINGS
12Customizing Settings
12- Menu Settings
13-Picture
14-Color
15-Display
16-Others
17READER Setting
18-SUPER ENERGY SAVING
ASSEMBLING AND PREPARING 3
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
<![endif]>ENGLISH
CD(Owner's Manual) /
Card
Power Cord
CAUTION
D-SUB Cable
(This cable is not included in all countries.)
Stand Base
DVI-D Cable
(This cable is not included in all countries.)
Stand Body
yyDo not use any unapproved accessories to ensure the safety and product life span.
yyAny damages or injuries by using unapproved accessories are not covered by the warranty.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
4 ASSEMBLING AND PREPARING
<![endif]>ENGLISH
Power Indicator yyLED On : Power is on yyLED Off: Power is off
(Power Button)
Front Side Buttons
Input Connectors (See p.9)
ASSEMBLING AND PREPARING 5
1Place the Monitor set with the screen side down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
21 Attach the Stand Body to the monitor set.
2 Attach the Stand Base to Stand Body.
3 Tighten the screw to the right with a coin.
Stand Body
1Place the Monitor set with the screen side down on a flat and cushioned surface.
21 Turn the screw to the left with a coin. 2 Pull out the Stand Base.
Pull out the Stand Body from the monitor set.
Stand Body
Stand Base |
1 |
Stand Body
Stand Base
Stand Base |
3 |
<![endif]>ENGLISH
<![endif]>ENGLISH
6 ASSEMBLING AND PREPARING
1Lift the monitor and place it on the table in an upright position.
Install at least 10 cm away from the wall to ensure sufficient ventilation.
10 cm
10 cm
10 cm
10 cm
1Place the monitor mounted on the stand base in an upright position.
2Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 20° backwards for a comfortable viewing experience.
Rear Side |
Front Side |
2Connect the Power cord to the monitor, then plug the power cord into the wall outlet.
WARNING
yyTo avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor's frame as illustrated below.
3Press the (Power) button on the front of the monitor to turn on the monitor.
CAUTION
yyUnplug the power cord prior to moving or installing the monitor. There is risk of electric shock.
yyBe careful not to touch or press the screen area when adjusting the angle of the monitor.
The connector for the Kensington lock is located on the rear of the monitor.
For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com.
Connect the monitor to the table with the Kensington lock cable.
NOTE
yyUsing the Kensington lock is optional. The accessories can be purchased at your local electronics store.
ASSEMBLING AND PREPARING 7
<![if ! IE]><![endif]>ENGLISH