This unit has been engineered and manufactured to assure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In order to
allow the proper operation of all safeguards incorporated in this TV set, observe the
following basic rules for its installation, use and servicing. Keep it in an accessible place
for future reference. (TV operating voltage is : 110V ~ 240V AC)
Make sure to insert the power plug completely. If power
cable is not fixed completely, a fire can break out .
Do not pull out the power cord. Always Pull out by the power
plug. Do not touch the plug with wet hands. Do not damage
the power cord.
Do not unplug the power cord while the product is in use. Do
not use the power plug to turn the product ON/OFF. Electric
shock can damage the product.
Do not overload AC outlets by plugging too many
appliances in the same socket or extension cords. They
may result in a shock or fire hazard.
Never leave the TV set “ON”/“STANDBY” when leaving the
house. Unplug the TV before moving it or if you are not
going to use it for several days or during lightning storms.
For Own safety, Never touch any part of product, the power
cord, and the antenna cable during lightning storms. You
may be electrocuted.
TV sets are provided with ventilation holes to allow the
release of heat generated. Make sure that these holes
are not blocked. Do not install the product in a confined
place, such as book case or built in cabinet .
Do not place any object filled with liquid such as Vases, cup,
glass etc on the TV set. Do not place the lighted candles on
the TV set. This may cause fire or an electric shock hazard.
If you can smell a smoke or other odors or hear a strange
sound unplug the power cord and contact the service
center. If you continue to use, electric shock can occur.
Do not place the product where it might be exposed to
excessive heat, sunlight, rain or moisture.
Do not attempt to open the product. There are
dangerous High Voltages inside. Refer to Servicing
through Qualified Personnel if the TV is not operating
properly.
2
Important Precautions
Avoid personal injury / set damage by Installing the product
on a flat and stable place that can support the weight of the
set and has no risk of dropping the product.
While cleaning the product, Unplug the Power cord and
clean with dry & soft cloth. Do not use thinner, aerosol or
any other chemical to clean .
Do not allow children to climb over it. If the product falls /
collapses, you may be hurt. Do not drop or push objects
(like coins, hair pins etc) into the TV cabinet openings.
Some internal parts carry hazardous voltages.
Do Not use the stabilizer, as this set has a In built stabilizer. Use of External Inferior
•
Quality stabilizer may damage your product .
Battery Installation: The remote control Handset is powered by two AA/
AAA batteries. To Load the Batteries, turn the remote control handset
over and open the battery compartment. Install two batteries as per the
polarity symbols ( and ) marked inside the battery compartment .
To avoid battery leakage and damage to the remote, remove the batteries from
•
the remote if you are not going to use it for several days. If any liquid leaks from
the batteries and touches your skin, immediately wash it away with water.
Disposal of your old appliance (as per e-waste Rules)
1. When this crossed out wheeled bin symbol is depicted on the product
and its operator’s manual, it means the product is covered by the e-waste
Management and Handling Rules, 2011 and are meant to be recycled,
2. Dos
a. The product is required to be handed over only to the authorized recycler for disposal.
b. Keep the product in isolated area, after it becomes non-functional/un-repairable
Don’t
a. The product should not be opened by the user himself/herself, but only by authorized
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed area.
3. Any disposal through unauthorized agencies/person will attract action under
4. Hazards of improper handling or accidental breakage :
a. All picture tubes are hazardous due to concentration of lead, cadmium and zinc
To prevent possible injury in case of breakage, wear heavy protective clothing,
5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of
dismantled, refurbished or disposed off.
so as to prevent its accidental breakage.
service personnel.
kabariwalah.
Environment (Protection) Act 1986 .
in it. The various chemicals and heavy metals contained in picture tubes cause
cancer, birth defects, hormone disruption, and damage body organs when they
leak into the environment. All of this can, and does, leach into the soil, ground
water, air and our own bodies.
including gloves & safety goggles.
b. If batteries are disposed incorrectly, it can greatly harm the environment. The
chemical by-products are hazardous. The metals and chemicals found in
batteries can mix into soil which may be hazardous to humans, plants and animals. If
thrown in fire, they can cause blast and release toxic gases which may be harmful
for health.
this appliance, please contact Toll Free No. 1800-180-9999 for details. All collection
centre and pick up facilities are done by third parties with LG Electronics India Pvt. Ltd.
merely as a facilitator. For more detailed information, please visit : http://www.lge.com/in
3
lqj{kk funsZ'k
Ñi;k [kqn dks pksV ls vkSj mRikn dks uqdlku ls cpkuk lqfuf'pr djus ds fy, bu funsZ'kksa dk ges'kk ikyu djsaA
• fp=k vkids mRikn ls FkksM+k fHkUu gks ldrk gS] D;ksafd ;g flQZ funsZ'kksa dks le>us esa enn ds fy, ,d mnkgj.k gSA
• Vhoh dk vkWijsfVax oksYVst gS% 110 - 240 V ,lhA
• LVsfcykbt+j dk iz;ksx ugha djsa] D;ksafd bl lsV esa fcYV bu LVsfcykbt+j gSA ?kfV;k DokfyVh ds ckgjh
mRikn dks ogka u j[ksa tgka ml ij csgn
xehZ] /kwi] o"kkZ ;k ueh dk vlj gks ldrk
gksA
mRikn dks [kksyus dh dksf'k'k u djsaA blds
Hkhrj [krjukd gkbZ oksYVst gksrs gSaA vxj
Vhoh Bhd ls dke u dj jgk gks] rks
;ksX;rkizkIr dfeZ;ksa ls lfoZflax djk,Aa
[kqn dks pksV@lsV dks uqdlku ls cpkus ds
fy, mRikn dks ,sls lery vkSj fLFkj LFkku
ij j[ksa tks lsV dk otu laHkky ldrk gks
vkSj mRikn ds fxjus dk [krjk u gksA
ekStwnxh ds dkj.k okrkoj.k essa buds fjlko ls dSalj] tUe nks”k] gkeksZu fo?kVu] vkSj ‘kjhj ds vaxks dks uqdlku gks ldrk gSA ;s lHkh jlk;u
feÍh esa] Hkw&xHkZ ty esa] gok esa ?kwy dj gekjs ‘kjhj esa izos’k dj ldrs gSA
[k½ ;fn cVS fj;k as dk xyr <xa l s fuiVku fd;k tkrk g]S rk s bll s i;koZ j.k dk s dkQh vf/kd udq lku gk s ldrk gAS jklk;fud mi&mRikn
[krjukd gkrs s gAaS cVS fj;k as e as ik, tku s okyh /kkr,q ¡ o jlk;u feÍh e as fey ldr s g aS tkfsd eu”q ;k]as iMs &+ ik/S kk as rFkk tkuojk as d s fy, [krjukd gk s
ldr sgAaS ;fn vkx e assQdas s tkr s g]aS rk s o sfoLQkVs dj ldr sg aSrFkk tgjhyh xlS k asdk sNkMs +ldr sg aS tkfsd LokLF; d s fy, gkfudkjd gk sldrh gAaS
miyCËk½ ij lEid Z djAas lHkh lxa gz dUs n z ,o a fid&vi lfq o/kk, a ckgjh ,tUslh }kjk pyk;h tkrh gAaS LG Electronics India Pvt. Ltd.
flQZ lqfo/kk iznku djkus dk ek/;e gSA vfËkd tkudkjh ds fy, osclkbV ns[ksa% http://www.lge.com/in
4
1
2
7
5
13
4
14
12
Location and function of controls
All the functions can be controlled with the remote control
handset. Some functions can also be adjusted with the
buttons on the front panel of the set.
Remote control handset
Before you use the remote control handset, please install
the batteries. See the previous page.
1. POWER
switches the set from On to standby or standby to On.
2. NUMBER BUTTONS
switches the set On from standby or directly select a
Programme number.
3. MENU
POWERMUTE
2
1
5
4
8
7
PSMTV/AV
0
PR
OK
VOLVOL
PR
Q-VIEWARC/*LIST
EYE/*
FAVOURITE
SLEEP
XDP/*
3
6
9
MENU
MM/*
selects a menu.
9
4. EYE / (option)
*
switches the eye function On or Off.
5./ (Programme Up/Down)
selects a programme or a menu item.
switches the set On from standby.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
10
OK accepts your selection or displays the current
mode.
3
6.Q. VIEW
returns to the previously viewed programme.
7. PSM (Picture Status Memory)
recalls your preferred picture setting.
8. XDP/*
6
Select excellent Digital picture.
9. MUTE
11
switches the sound On or Off.
10. TV/AV
15
selects TV or AV mode.
8
switches the set On from Standby.
11. LIST
displays the programme table. press LIST key again
to clear the LIST table from the screen.
12. SLEEP
sets the sleep timer.
13. ARC/* (option)
change picture format (Normal/Zoom).
14. FAVOURITE
pressing each time this button will select a stored
favourite programme.
15. MM / * (option)
select music mode.
COLOURED BUTTONS : When Menu is On some of these
buttons are used for programme edit in programme edit
window
Remarks : 1. Some keys in remote can be non-functional,
these keys are used in other models.
# Remote Design / Aesthetic may vary from model
to model.
5
Location and function of controls
Shown below is a simplified representation of front panel, here shown may be
somewhat different from your set.
OK /
ON/OFF
1
MENU
3
2
45B5A
1. MAIN POWER (ON/OFF)
switches the set On or Off.
2. REMOTE CONTROL SENSOR
3. POWER/STANDBY INDICATOR
Illuminates brightly when the set is
in standby mode dims when the set
is switched On
4.MENU
VOL
PR
5A. OK /
It accepts your selection when it is in menu.
Otherwise it selects input (TV or AV)
5B. (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
(Programme Up/Down)
selects a programme or a menu item.
switches On the set from standby.
selects a menu.
Basic operation
On and Off
1. Press the main power button to switch the set On.
2. If the set is in standby mode, press the POWER, TV/AV or NUMBER buttons on the remote control
handset to switch it On fully.
POWERMUTE
2
1
5
4
8
7
PSMTV/AV
0
PR
OK
VOLVOL
PR
Q-VIEWARC/*LIST
EYE/*
FAVOURITE
SLEEP
XDP/*
3
6
9
MENU
MM/*
3. Press the POWER button on the remote control handset.
The set reverts to standby mode.
4. Press the main power button again to switch the set Off.
Note : while the set is switched On and mains plug is
disconnected, if mains plugged again then set will switch to
standby or power On.
Programme selection
You can select a programme number with the or
NUMBER Buttons.
Volume adjustment
Press the button to adjust the volume.
Quick view
Press the Q.VIEW button to view the last programme
Mute function
Press the MUTE button. The sound is switched Off and
the display appears.
You can cancel it by pressing the MUTE, button.
On screen language selection (option)
The menu can be displayed on the screen in desired language.
First select your language.
1. Press the MENU button and then button to select the
special menu.
2. Press the button after selecting language by pressing
button.
3. Press the button to selects the desired language.
All the On screen display will appear in the selected
language.
4. Repeatedly press the MENU button to return to normal TV
viewing.
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.