LG 24MN43T, 19MN43D User Manual [es]

ENGLISH

OWNER’S MANUAL

LED TV

LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating the your TV and retain it for future reference.

19MN43D 22MN43D 24MN43D 27MA43D

24MN43T 27MA43T

www.lg.com

ENGLISH

TABLE OF CONTENTS

3 LICENSES

4 INSTALLATION PROCEDURE

5 ASSEMBLING AND PREPARING

5 Unpacking 9 Parts and buttons 11 Lifting and moving the TV 12 Setting up the TV 12 - Attaching the Stand 16 - Mounting on a table 17 - Tidying cables 18 - Detaching the Stand 20 - Mounting on a wall

22 WATCHING TV

22 Turning the TV on for the first time

39 USING THE USER GUIDE

39 Accessing User Guide menu. 39 - Using the TV menu 39 - Using the Remote Control

40 MAINTENANCE

40 Cleaning Your TV 40 Screen and frame 40 Cabinet and stand 40 Power cord 41 Preventing “Image burn” or “Burn-in” on

your TV screen

42 TROUBLESHOOTING

42 General

43 SPECIFICATIONS

24 MAKING CONNECTIONS

24 Connecting an antenna 25 Connecting to a HD receiver, DVD, VCR

player or Gaming device 25 - HDMI connection 26 - HDMI to DVI connection 27 - Component connection 28 - Composite connection 29 - Euro Scart connection 30 Connecting to a USB 30 Connecting to a CI Module 31 Connecting to a wired network 32 Connecting to a PC 33 - HDMI connection 34 - HDMI to DVI connection 35 - RGB connection

36 REMOTE CONTROL

38 CUSTOMIZING SETTINGS

38 Accessing main menus

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

ENGLISH

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274

INSTALLATION PROCEDURE

ENGLISH

INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included.

Attach the stand to the TV.

Connect an external device to the TV.

NOTE

Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.



The available menus and options may differ from the input source or product model that you are



using. New features may be added to this TV in the future.



ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

NOTE

The accessories supplied with your product may vary depending on the model.



Product specifications or contents in this manual may be changed without prior notice due to



upgrade of product functions.

CAUTION

Do not use any pirated items to ensure the safety and product life span.



Any damages or injuries by using pirated items are not covered by the warranty.



NOTE

The items supplied with your product may vary depending on the model.



Product specifications or contents of this manual may be changed without prior notice due to



upgrade of product functions. For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick



and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

ENGLISH

*A 10 mm *B

18 mm

ASSEMBLING AND PREPARING

ENGLISH

Remote control Batteries (AAA)

(See p.36, See p.37)

19MN43D

24MN43T 24MN43D 22MN43D

Cards

Stand BaseCD (Owner's Manual)

(See p.12, See p. 18)

Stand Body

(See p.12, See p. 18)

Power Cord.

(Depending on the country)

(See p.16)

Isolator

(Depending on the country)

Cable Tie.

(See p.17)

AC-DC Adapter.

(See p.16)

AC-DC Adapter.

(Depending on the country)

(See p.16)

ASSEMBLING AND PREPARING

27MA43D

Remote control Batteries (AAA)

(See p.36, See p.37)

27MA43T

Cards

ENGLISH

Stand BaseCD (Owner's Manual)

(See p. 14, See p. 19)

Stand Body

(See p. 14, See p. 19)

Power Cord.

(Depending on the country)

(See p.16)

Isolator

(Depending on the country)

Screws for Assembly 2 EA

(See p. 14, See p. 19)

AC-DC Adapter.

(See p.16)

Cable Tie.

(See p.17)

AC-DC Adapter.

(Depending on the country)

(See p.16)

ASSEMBLING AND PREPARING

ENGLISH

NOTE

Antenna Isolator Installation Guide

-Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.

»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact

might be heated and excessive heat might cause an accident.

-You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

-Before starting, be sure that the TV antenna is connected.

Wall

ANTENNA/

CABLE IN

Cable / Antenna

Isolator

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a ﬁre hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

1. Connect to TV.

2. Connect to Set-Top box.

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

Parts and buttons

ASSEMBLING AND PREPARING

Remote Control Sensor

ENGLISH

Standby Light

Lighting On:



When Power is turned off

Lighting Off:



When Power is turned on

Touch Buttons

Touch button Description

Scrolls through the saved programmes.

Adjusts the volume level.

OK Selects the highlighted menu option or confirms an input.

SETTINGS Accesses the main menus, or saves your input and exits the menus.

INPUT Changes the input source.

/ I

Turns the power on or off.

NOTE

All of the buttons are touch sensitive and can be operated through simple touch with your finger.

ENGLISH

ASSEMBLING AND PREPARING

19MN43D 27MA43D

24MN43T

LAN

27MA43T

Only UK

24MN43D 22MN43D

(Depending on the model)

Connection panel (See p.24)

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size.

CAUTION

Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images.

It is recommended to move the TV in the



box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect



the power cord and all cables. Hold the top and bottom of the TV frame



firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

ASSEMBLING AND PREPARING

When holding the TV, the screen should face



away from you to prevent the screen from scratches.

When transporting the TV, do not expose the



TV to jolts or excessive vibration. When transporting the TV, keep the TV



upright, never turn the TV on its side, or tilt towards the left or right.

ENGLISH

Setting up the TV

ENGLISH

Attaching the Stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

ASSEMBLING AND PREPARING

19MN43D 24MN43D 22MN43D 24MN43T

Place the TV with the screen side down on a

flat and cushioned surface.

Attach the Stand Base from the Stand Body by

turning the screw to the right with a Coin.

CAUTION

Lay a foam mat or soft protective cloth



on the surface to protect the screen from damage. When attaching the stand to the TV,



place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Attach the Stand Body from the TV.

CAUTION

Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.

CAUTION

Do not carry the monitor upside-down



as this may cause it to fall off its stand, resulting in damage or injury.

The illustration shows a general example of



installation and may look different from the actual product.

ASSEMBLING AND PREPARING

ENGLISH

Do not carry the monitor upside-down by



holding the stand body as this may cause it to fall off, resulting in damage or injury. The illustration shows a general example of



installation and may look different from the actual product.

ASSEMBLING AND PREPARING

ENGLISH

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

27MA43D 27MA43T

Place the TV with the screen side down on a

flat and cushioned surface.

Attach the Stand Body from the TV.

Insert the two Lockers of the Stand Body right into the groove of the TV head and secure them by pressing the left and right bottom sides.

Secure the TV and the Stand Body with the

2 screws.

WARNING

If you don`t fasten the screw tightly, TV will fall down and get damaged.

Attach the Stand Base from the Stand Body by

turning the screw to the right with a Coin.

Locker

CAUTION

Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.

ASSEMBLING AND PREPARING

CAUTION

Do not carry the monitor upside-down as this



may cause it to fall off its stand, resulting in damage or injury.

The illustration shows a general example of



installation and may look different from the actual product.

ENGLISH

Do not carry the monitor upside-down by



holding the stand body as this may cause it to fall off, resulting in damage or injury.

The illustration shows a general example of



installation and may look different from the actual product.

+ 35 hidden pages