Lexmark X84, X85 User Manual

Safety, help, questions...

X84-X85 Scan/Print/Copy

Do not connect the USB cable yet.

www.lexmark.com

Connect the power supply.Unlock the scanner.Remove the card.

Wait for text to appear on the display.

Note: If text does not appear, disconnect, and then

reconnect the power supply.

Raise the paper support and extend the paper exit tray.

Load paper and adjust the paper guide.

Open the cartridge door. Remove the tape. Insert the print cartridges, and then snap them into place.

Snap

Close the cartridge door.

Press and then press Select to choose cartridge

type, (old or new), and either Standard or High Yield.

Windows: Click Install Now.

Wait for the alignment page to print. Press and then press

Select to enter alignment values.

Windows users: Click Next, Next, Next.

Insert CD 1.

Windows users: Wait until prompted by the

CD software to connect the USB cable.

Macintosh: Connect the USB cable, and then click

Install and Agree.

Important: If installation does not continue after connecting the USB cable,

disconnect, and then reconnect both the USB cable and the power supply.