Page 1
MS710dn, MS711dn,
MS810n/dn/dtn/de,
MS811n/dn/dtn, MS812dn/dtn/de,
MX710de/dhe, MX711de/dhe,
MX810de, MX811de, MX812de
Technical Reference
August 2013 www.lexmark.com
Page 2
Edition notice
August 2013
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC.,
PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied
warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these
changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
References in this publ ication to products, programs, or serv ices do not imply that the manufacturer intends to make these availabl e in all countries
in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service
may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used
instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by
the manufacturer, are the user’s responsibility.
For Lexmark technical support, visit
http://support.lexmark.com.
For information on supplies and downloads, visit
www.lexmark.com.
© 2013 Lexmark International, Inc.
All rights reserved.
Trademarks
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries.
PCL® is a registered trademark of the Hewlett-Packard Company.
All other trademarks are the property of their respective owners.
GOVERNMENT END USERS
The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software"
and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent
with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software
Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all
other end users pursuant to the terms and conditions herein.
Page 3
Contents
Edition notice......................................................................................................2
Introduction........................................................................................................5
Understanding letters after model numbers.......................................................................................................5
Learning about the printer..................................................................................6
Finding information about the printer................................................................................................................6
Printer Control Language (PCL) page formatting..................................................8
Printable areas.....................................................................................................................................................8
Supported paper and envelope dimensions.......................................................................................................8
Printer Job Language (PJL).................................................................................10
PJL commands information...............................................................................................................................10
PostScript (PS) emulation..................................................................................11
PostScript paper size support............................................................................................................................11
PostScript paper tray support.................................................................................................. .........................12
PostScript envelope size support......................................................................................................................13
PostScript envelope tray support......................................................................................................................14
Printer specifications.........................................................................................16
Airflow requirement..........................................................................................................................................16
Noise emission levels.........................................................................................................................................16
Electrical specifications.....................................................................................................................................17
Power requirements............................................................................................................. .............................17
Physical specifications.......................................................................................................................................18
Clearance requirements....................................................................................................................................20
Environmental conditions.................................................................................................................................21
Altitude and atmospheric pressure specifications............................................................................................21
Appendix A: PCL support...................................................................................22
PCL emulation commands.................................................................................................................................22
GL/2 commands................................................................................................................................................28
Appendix B: PJL support....................................................................................31
Common variables for both printer languages..................................................................................................31
Lexmark‑unique PJL variables for both printer languages................................................................................33
Common variables for PCL emulation...............................................................................................................43
Lexmark‑unique variables for PCL emulation....................................................................................................43
Common variables for PostScript emulation.....................................................................................................44
Contents 3
Page 4
Lexmark‑unique variables for PostScript emulation...................................................................................... ...44
Lexmark‑unique LRESOURCE variables..............................................................................................................44
Status Readback commands..............................................................................................................................44
USTATUS unsolicited status variables...............................................................................................................45
PJL messages for auto-continuable conditions.................................................................................................45
PJL messages for attendance conditions......................................................................................... ..................54
PJL messages for paper handling.......................................................................................................................75
PJL messages for paper jams.............................................................................................................................78
Service errors.....................................................................................................................................................84
Device attendance messages............................................................................................................................84
Lexmark‑unique PJL commands............................................................................................................ ............84
Appendix C: PostScript support.........................................................................87
Supplemental operators....................................................................................................................................87
Page device parameters....................................................................................................................................90
User interpreter parameters.............................................................................................................................95
System interpreter parameters.........................................................................................................................96
Devices supported.............................................................................................................. ...............................98
Device parameters..........................................................................................................................................101
PostScript message keys commands...............................................................................................................109
Index...............................................................................................................110
Contents 4
Page 5
Introduction
Overview
This edition of the Technical Reference contains information about the following printers:
MS710dn
MS711dn
MS810n
MS810dn
MS810dtn
MS810de
MS811n
MS811dn
MS811dtn
MS812dn
MS812dtn
MS812de
MX710de
MX710dhe
MX711de
MX711dhe
MX810de
MX811de
MX812de
Understanding letters after model numbers
Some LexmarkTM printers may have one or more letters after the model number to indicate features.
Letter Meaning
d
Duplex
*
nNetwork
t Additional tray included
x High capacity feeder
ee-Task (touch screen device)
m Mailbox
f Staple finishing option
p Staple with hole punch finisher
h Hard disk
*
Duplex (two‑sided) printing using an optional duplex unit or an internal duplex unit based on the product.
Introduction 5
Page 6
Learning about the printer
Finding information about the printer
What are you looking for? Find it here
Initial setup instructions:
• Connecting the printer
• Installing the printer software
Setup documentation—The setup documentation came
with the printer and is also available at
http://support.lexmark.com.
Additional setup and instructions for using the printer:
• Selecting and storing paper and specialty media
• Loading paper
• Configuring printer settings
• Viewing and printing documents and photos
• Setting up and using the printer software
• Configuring the printer on a network
• Caring for and maintaining the printer
• Troubleshooting and solving problems
User's Guide and Quick Reference Guide—The guides may be
available on the Software and Documentation CD.
For more information, visit
http://support.lexmark.com.
Instructions for:
• Connecting the printer to an Ethernet network
• Troubleshooting printer connection problems
Networking Guide—Open the Software and
Documentation CD, and then navigate to:
Documentation > User’s Guide and other publications >
Networking Guide
Help using the printer software Windows or Mac Help—Open a printer software program or
application, and then click Help.
Click
?
to view context‑sensitive information.
Notes:
• Help is automatically installed with the printer
software.
• The printer software is located in the printer program
folder or on the desktop, depending on your operating
system.
The latest supplemental information, updates, and customer
support:
• Documentation
• Driver downloads
• Live chat support
• E‑mail support
• Voice support
Lexmark support Web site—
http://support.lexmark.com
Note: Select your country or region, and then select your
product to view the appropriate support site.
Support telephone numbers and hours of operation for your
country or region can be found on the support Web site or
on the printed warranty that came with your printer.
Record the following information (located on the store
receipt and at the back of the printer), and have it ready
when you contact customer support so that they may serve
you faster:
• Machine Type number
• Serial number
• Date purchased
• Store where purchased
Learning about the printer 6
Page 7
What are you looking for? Find it here
Warranty information Warranty information varies by country or region:
• In the U.S.—See the Statement of Limited Warranty
included with this printer, or at
http://support.lexmark.com.
• In other countries and regions—See the printed
warranty that came with your printer.
Learning about the printer 7
Page 8
Printer Control Language (PCL) page formatting
For more information on PCL, see the Printer Languages and Interfaces Technical Reference. It contains a complete listing with
descriptions of PCL commands.
To determine which PCL commands your printer supports, see
“Appendix A: PCL support” on page 22.
Printable areas
The printable areas and logical pages for PCL emulation (both portrait and landscape orientation) are illustrated below. See
the legend that follows for definitions of areas A through I.
Legend:
A Portrait physical page width and landscape physical page length
B Portrait physical page length and landscape physical page width
C Portrait logical page width
D Landscape logical page width
E Distance between the side edge of the physical page and the logical page in portrait
F Distance between the side edge of the physical page and the logical page in landscape
G Distance between the top and bottom edge of the physical page and logical page
H Distance between the left and right edge of the physical page and the printable area in portrait, or distance between the top
and bottom edge of the physical page and printable area in landscape
I Distance between the top and bottom edge of the physical page and the printable area in portrait, or distance between the left
and right edge of the physical page and the printable area in landscape
Note: The tables that follow in this chapter list the page sizes and dimensions of each area labeled on the preceding
diagram for all paper and envelope sizes your printer supports.
Supported paper and envelope dimensions
The following table lists the page sizes and print area dimensions for all supported paper and envelope sizes. For more
information about the printable areas and logical pages for PCL emulation, see
“Printable areas” on page 8.
Printer Control Language (PCL) page formatting 8
Page 9
Selection Paper/envelope
dimensions
Dimensions by area (pels)
1
Page size
parameters
2
Name mm inches A B C D E F G H I
Paper
2, 602 Letter 216 x 279 8.5 x 11 5100 6600 4800 6360 150 120 0 100 100
3, 603 Legal 216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100
12, 45, 612 JIS B5 182 x 257 7.2 x 10.1 4300 6070 4000 5830 150 120 0 100 100
26, 626 A4
(198 mm)
3
210 x 297 8.3 x 11.7 4960 7014 4676 6778 142 118 0 80 100
26, 626 A4
(203 mm)
3
210 x 297 8.3 x 11.7 4960 7014 4800 6778 80 118 0 80 100
1, 601 Executive 184.2 x 266.7 7.25 x 10.5 4350 6300 4050 6060 150 120 0 100 100
13, 613 A5 148 x 210 5.83 x 8.27 3496 4960 3196 4720 142 118 0 100 100
300 Oficio
(México)
215.9 x 340.4 8.5 x 13.4 5100 8040 4800 7800 150 120 0 100 100
4 or 10 Folio 216 x 330 8.5 x 13 5100 7800 4800 7560 150 120 0 100 100
15 Statement 139.7 x 215.9 5.5 x 8.5 3300 5100 3000 4860 150 120 0 100 100
24 A6 105 x 148 4.13 x 5.83 2480 3496 2196 3260 142 118 0 100 100
101
Universal
6
216 x 356 8.5 x 14 5100 8400 4800 8160 150 120 0 100 100
Envelope
80 7 3/4
Envelope
98.4 x 190.5 3.875 x 7.5 2324 4500 2024 4260 150 120 0 100 100
89 9 Envelope 98.4 x 225.4 3.875 x 8.875 2324 5324 2024 5084 150 120 0 100 100
81 10 Envelope 104.8 x 241.3 4.125 x 9.5 2474 5700 2174 5460 150 120 0 100 100
90 DL Envelope 220 x 110 8.66 x 4.33 2598 5196 2314 4960 142 118 0 100 100
91 C5 Envelope 229 x 162 9.02 x 6.38 3826 5408 3542 5172 142 118 0 100 100
99
5
, 100
B5 envelope 176.0 x 250.0 6.93 x 9.84 4156 5904 3872 5668 142 118 0 100 100
1
Pel dimensions are for 600 dpi.
2
Page Size Parameters are explained in the Page Control table in the PCL chapter of the Printer Language and Interfaces Technical
Reference.
3
The width of the logical page for A4 paper can be changed from the printer control panel or your application.
4
For the Universal paper size, the area dimensions are listed in pel ranges.
5
Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size
as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039.
6
To support two‑sided printing, the Universal paper size length must be between 5.83 inches (148 mm) and 14 inches (355.6 mm);
and the width must be between 4.13 inches (105 mm) and 8.5 inches (215.9 mm).
Note: The explanation of the printable area assumes that the Print Area menu item is set to Normal. For more information, see
“Print Area Menu Item” in the PCL chapter of the Printer Language and Interfaces Technical Reference.
Printer Control Language (PCL) page formatting 9
Page 10
Printer Job Language (PJL)
PJL commands information
Your printer supports complete PJL commands, including certain commands that cause the printer to enter PCL emulation,
PostScript emulation, and Personal Printer Data Stream (PPDS).
For a complete listing with descriptions of PJL commands, see the Printer Languages and Interfaces Technical Reference.
To determine which commands your printer supports, see
“Appendix B: PJL support” on page 31.
Printer Job Language (PJL) 10
Page 11
PostScript (PS) emulation
Your printer supports complete supplemental operators for PostScript emulation. For full, detailed descriptions of these
operators, see the PostScript emulation chapter of the Printer Languages and Interfaces Technical Reference.
To determine which commands your printer supports, see
“Appendix C: PostScript support” on page 87.
PostScript paper size support
= Supported
X = Not supported
Paper sizes
Printer model
Size Literal name Size (mm) Size (in.) Size (points) MS710,
MS711,
MS810,
MS811,
MS812
MX710,
MX711
MX810,
MX811,
MX812
11 x 17 11 x 17 279.4 x 431.8 11 x 17 792 x 1224 XXX
17 x 11 ledger 431.8 x 279.4 17 x 11 1224 x 792 XXX
A3 a3 297 x 420 11.7 x 16.54 842 x 1191 XXX
A4 a4 210.0 x 297.0 8.3 x 11.7 595 x 842
A5 a5 148.0 x 210.0 5.83 x 8.27 419 x 595
A6 a6 105.0 x 148.0 4.13 x 5.83 297 x 419
Executive executivepage 184.2 x 266.7 7.25 x 10.5 522 x 756
Folio folio 215.9 x 330.2 8.5 x 13.0 612 x 936
JIS B4 b4* 257 x 364 10.12 x 14.33 729 x 1032 XXX
JIS B5 b5* 182.0 x 257.0 7.2 x 10.1 516 x 729
Legal legal 215.9 x 355.6 8.5 x 14.0 612 x 1008
Letter letter 215.9 x 279.4 8.5 x 11.0 612 x 792
Oficio oficio 215.9 x 340.4 8.5 x 13.4 612 x 965
(Lexmark‑unique
size)
612 x 972 (official
PostScript size)
Statement statement 139.7 x 215.9 5.5 x 8.5 396 x 612
Universal 215.9 x 355.6 8.5 x 14.0 612 x 1008
* This is a Japanese Industry Standard (JIS) paper size. The same named designation is used by the JIS and International Organization
for Standardization (ISO) for different paper sizes.
PostScript (PS) emulation 11
Page 12
PostScript paper tray support
When the printer receives one of the operators listed in “Tray selected with tray operators” on page 12, it performs the
actions listed in this section. This paper tray selection process ends when a suitable paper source is chosen and paper is fed
from this tray.
•
The printer checks the value of manualfeed in statusdict and the ManualFeed page device parameter. If either one is true,
then the printer sends a message to load the requested size in the manual feeder or multipurpose feeder.
•
The PageSize Policy is set to 0 by means of setpagedevice.
•
The printer checks the paper size loaded in the current active source to determine if it matches the requested size. If the
sizes match, then the paper is fed from the active source.
Note: The current active tray is the last source that was selected from the printer control panel or by the printer
language.
•
If the requested size and the size loaded in the active source do not match, then the sources are searched in the order
defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
•
If the requested media size is not found by the previous search, then the following search order is used:
–
Tray 1
–
Tray 2
–
Tray 3
–
Multipurpose feeder
–
Tray 4
–
Tray 5
•
If the requested size cannot be located in any automatic source, then a configurationerror is issued and the job is flushed.
For printers that support automatic two‑sided printing (duplexing):
•
Automatic two‑sided printing is not supported for custom-size paper or for envelopes in the multipurpose feeder.
Automatic two‑sided printing is supported from the multipurpose feeder for all other papers.
•
If the paper source is changed before the back side of a two‑sided page prints, then a blank back page prints, the paper
source changes, and the information for the back side of the page is printed on the front side of a page sent from the new
paper source.
When these operators are used, it is equivalent to executing the following PostScript emulation sequence:
<< /PageSize [x y]/ImagingBBox null /Policies << /PageSize 0>> >>
setpagedevice
where x and y are the PageSize in points.
= Supported
X = Not supported
Printer model
Operator Tray selected
(corresponding image size
is set)
MS710, MS711, MS810,
MS811, MS812
MX710, MX711 MX810, MX811,
MX812
11x17tray Tray with 11 x 17 in.‑size
paper
XXX
a3tray Tray with A3‑size paper XXX
a4tray Tray with A4-size paper
a5tray Tray with A5-size paper
a6tray Tray with A6-size paper
b4tray Tray with B4‑size paper
b5tray Tray with B5-size paper
PostScript (PS) emulation 12
Page 13
= Supported
X = Not supported
Printer model
Operator Tray selected
(corresponding image size
is set)
MS710, MS711, MS810,
MS811, MS812
MX710, MX711 MX810, MX811,
MX812
customtray Tray with custom-size paper XXX
executivetray Tray with executive-size
paper
foliotray Tray with folio-size paper
ledgertray Tray with ledger‑size paper
legaltray Tray with legal-size paper
lettertray Tray with letter-size paper
oficiotray Tray with oficio‑size paper
statementtray Tray with statement-size
paper
PostScript envelope size support
The literal names in “Envelope sizes supported” on page 13 are also supported as operators in userdict. These operators
change the image size but not the active paper source. Therefore, when these operators are used, part of the image may be
clipped.
When these literal names are used as operators, it is equivalent to executing the following PostScript emulation sequence.
The following example uses a 3.875 x 7.5‑inch envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
= Supported
X = Not supported
Envelope sizes
Printer model
Size name Literal name Size (mm) Size (in.) Size (points) MS710,
MS711,
MS810,
MS811,
MS812
MX710,
MX711
MX810,
MX811,
MX812
7 3/4 3.875x7.5envelope 98.4 x 190.5 3.875 x 7.5 279 x 540
Commercial 9 3.875x8.875envelope 98.4 x 225.4 3.875 x 8.875 279 x 639
Commercial 10 4.125x9.5envelope 104.8 x 241.3 4.125 x 9.5 297 x 684
International B5 176x250envelope 176 x 250 6.93 x 9.84 499 x 708
International C5 162x229envelope 162 x 229 6.38 x 9.01 459 x 649
International DL 110x220envelope 110 x 220 4.33 x 8.66 312 x 624
Other envelope otherenvelope 296.93 x 427.48 11.69 x 16.83 842 x 1212
PostScript (PS) emulation 13
Page 14
Literal names supported
= Supported
X = Not Supported
Literal names
Printer model
Literal name Compatible literal name MS710, MS711, MS810,
MS811, MS812
MX710, MX711 MX810, MX811,
MX812
b5envelope 176x250envelope
c5envelope 162x229envelope
com10envelope 4.125x9.5envelope
dlenvelope 110x220envelope
monarcenvelope 3.875x7.5envelope
PostScript envelope tray support
The envelope tray the printer selected when it receives an envelopetray operator is listed in “Envelopetray operator selections”
on page 15.
Printer action when manualfeed is false
The printer sets the PageSize Policy to 0 if manualfeed in statusdict and the ManualFeed page device parameter are false.
The printer checks and compares source tray size settings between printer and print job data stream.
Envelope setting Printer action
Envelope size settings match The printer pulls the envelope.
Envelope size settings do not
match
The printer searches sources in the order defined by the Priority array in the InputAttributes
dictionary in the pagedevice dictionary.
If search cannot find the requested media size, then the following search order is used:
• Envelope feeder
• Multipurpose feeder
Requested size and type are not
available from any automatic
source
You are prompted to load the requested envelope size and type in the manual feed source.
If the size is still not available, then a configurationerror is issued, and the print job is flushed.
Printer action when manualfeed is true
The printer prompts you to load the requested size manually if manualfeed or ManualFeed is true. If no manual feed exists
on the printer, then a rangecheck error message is issued.
These operators are equivalent to executing the following PostScript emulation sequence:
<</PageSize [x y] /ImagingBBox null /Policies<</PageSize 0>> >>
setpagedevice
where x and y are the PageSize in points.
PostScript (PS) emulation 14
Page 15
= Supported
X = Not supported
Tray operators
Printer model
Operator Tray selected (corresponding image size is
set)
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711 MX810, MX811,
MX812
110x220envelopetray Tray with 110 x 220‑size envelopes
dlenvelopetray Tray with 110 x 220‑size envelopes
162x229envelopetray Tray with 162 x 229‑size envelopes
c5envelopetray Tray with 162 x 229‑size envelopes
176x250envelopetray Tray with 176 x 250‑size envelopes
b5envelopetray Tray with 176 x 250‑size envelopes
3.875x7.5envelopetray Tray with 3.875 x 7.5‑size envelopes
monarcenvelopetray Tray with 3.875 x 7.5‑size envelopes
3.875x8.875envelopetray Tray with 3.875 x 8.875‑size envelopes
4.125x9.5envelopetray Tray with 4.125 x 9.5‑size envelopes
com10envelopetray Tray with 4.125 x 9.5‑size envelopes
otherenvelopetray Tray with other size envelopes
PostScript (PS) emulation 15
Page 16
Printer specifications
Airflow requirement
The room should meet ASHRAE 62—1989 standards.
Noise emission levels
The following measurements are in accordance with ISO 7779 and in conformance with ISO 9296.
Status
1-meter average sound pressure, dBA
MS710 MS711 MS810 MS811 MS812 MX710 MX711 MX810 MX811 MX812
Copy Not
applicable
Not
applicable
Not
applicable
Not
applicable
Not
applicable
58 58 55 56 56
Duplex
printing
54 55 55 57 57 57 58 54 55 56
Idle (Standby
mode)
32 33 33 34 34 33 33 30 31 30
Quiet mode
(duplex)
52 51 51 51 51
53 54 51 51 51
Quiet mode
(simplex)
53 52 53 53 52
Scan to file Not
applicable
Not
applicable
Not
applicable
Not
applicable
Not
applicable
57 57 57 57 57
Simplex
printing
55 56 56 57 58 57 58 55 55 56
Note: Measurements apply to 300‑dpi, 600‑dpi, and 1200‑dpi printing.
Status
Declared sound power level, bels
MS710 MS711 MS810 MS811 MS812 MX710 MX711 MX810 MX811 MX812
Copy Not
applicable
Not
applicable
Not
applicable
Not
applicable
Not
applicable
7.3 7.4 7.2 7.3 7.3
Duplex
printing
7.0 7.1 7.1 7.2 7.3 7.2 7.3 7.0 7.1 7.2
Idle (Standby
mode)
4.7 4.8 5.1 5.1 5.0 4.8 4.8 4.7 4.7 4.6
Quiet mode
(duplex)
6.7 6.7 6.6 6.6 6.6
6.9 6.9 6.8 6.8 6.8
Quiet mode
(simplex)
6.8 6.8 6.8 6.8 6.8
Scan to file Not
applicable
Not
applicable
Not
applicable
Not
applicable
Not
applicable
7.5 7.4 7.5 7.5 7.5
Simplex
printing
7.1 7.2 7.2 7.3 7.4 7.3 7.3 7.1 7.2 7.2
Note: Measurements apply to 300‑dpi, 600‑dpi, and 1200‑dpi printing.
Printer specifications 16
Page 17
Electrical specifications
Printer model Electrical specification
MS710, MS711, MS810, MS811, MS812 low‑voltage models 100–127 V at 47–63Hz, nominal
90–137 V, extreme
MS710, MS711, MS810, MS811, MS812 high‑voltage models 220–240 V at 47–63Hz, nominal (not available in all countries)
198–254 V, extreme
MX710, MX711, MX810, MX811, MX812 low‑voltage models 100–127 V at 50–60Hz, nominal
90–137 V, extreme
MX710, MX711, MX810, MX811, MX812 high‑voltage models 220–240 V at 50–60Hz, nominal (not available in all countries)
198–259 V, extreme
Warning—Potential Damage: Do not use voltage converters with printers.
Power requirements
The following table specifies the average nominal power requirements for the base printer, including fuser power.
Lexmark MS710dn, MS711dn, MS810dn, MS810de, MS811dn, MS812dn, and MS812de average nominal
power requirements
State MS710dn MS711dn MS810dn MS810de MS811dn MS812dn MS812de
Average power while printing continuously
Print (simplex) 780 W 800 W 700 W 700 W 770 W 830 W 830 W
Print (duplex) 575 W 600 W 500 W 500 W 560 W 630 W 630 W
Average power while idle
Hibernate mode 0.52 W 0.52 W 0.5 W 0.5 W 0.5 W 0.5 W 0.5 W
Sleep mode 4.8 W 4.8 W 4.8 W 6.0 W 4.8 W 4.8 W 6.5 W
Ready mode (Tier 1) 100 W 100 W 55 W 60 W 55 W 55 W 60 W
Ready mode (Tier 2) 75 W 75 W 30 W 30 W 30 W 30 W 30 W
Off 0.1 W 0.1 W 0.1 W 0.1 W 0.1 W 0.1 W 0.1 W
Lexmark MX710, MX711, MX810, MX811, and MX812 average nominal power requirements
State MX710 MX711 MX810 MX811 MX812
Average power while printing continuously
Print (simplex) 825 W 925 W 760 W 860 W 960 W
Print (duplex) 625 W 725 W 575 W 675 W 775 W
Average power while idle
Hibernate mode 0.7 W 0.7 W 0.7 W 0.7 W 0.7 W
Sleep mode 14 W 15 W 16 W 16 W 16 W
Ready mode (Tier 1) 110 W 110 W 120 W 120 W 120 W
Ready low power mode
(Tier 2)
55 W 55 W 70 W 70 W 70 W
Off 0 W0 W0 W0 W0 W
Printer specifications 17
Page 18
State MX710 MX711 MX810 MX811 MX812
Average power while copying continuously
Copy 860 W 960 W 820 W 920 W 1020 W
Average power while scanning continuously
ADF scan 130 W 130 W 140 W 140 W 140 W
Typical Electricity Consumption (TEC)
Normal mode 6.8 kwh/wk 7.5 kwh/wk 7.1 kwh/wk 7.7 kwh/wk 8.1 kwh/wk
Eco mode 5.0 kwh/wk 5.6 kwh/wk 4.9 kwh/wk 5.6 kwh/wk 6.0 kwh/wk
Lexmark MS710dn, MS711dn, MS810dn, MS810de, MS811dn, MS812dn, MS812de, MX710, MX711, MX810,
MX811, and MX812 maximum (average) current while printing
State MS710dn, MS711dn MS810dn, MS810de,
MS811dn, MS812dn, MS812de
MX710, MX711, MX810,
MX811, MX812
100–110 V 10.0 A 11.5 A 12.4 A
110–127 V 8.7 A 10.0 A 10.7 A
220–240 V 4.4 A 5.0 A 5.4 A
Physical specifications
Dimensions for single‑function printer (unpackaged)
Printer model Height Width Depth Weight
MS710dn 390 mm (15.4 in.) 425 mm (16.7 in.) 510 mm (20.1 in.) 23.13 kg (51.0 lb)
MS711dn 419 mm (16.5 in.) 425 mm (16.7 in.) 510 mm (20.1 in.) 23.77 kg (52.4 lb)
MS810n, MS810dn,
MS811n, MS811dn,
MS812dn
419 mm (16.5 in.) 425 mm (16.7 in.) 510 mm (20.1 in.) 23.66 kg (52.2 lb)
MS810dtn, MS811dtn,
MS812dtn
525 mm (20.7 in.) 425 mm (16.7 in.) 510 mm (20.1 in.) 29.47 kg (65.0 lb)
MS810de 419 mm (16.5 in.) 425 mm (16.7 in.) 510 mm (20.1 in.) 23.71 kg (52.3 lb)
MS812de 419 mm (16.5 in.) 425 mm (16.7 in.) 510 mm (20.1 in.) 23.99 kg (52.9 lb)
Note: Printer weight includes the imaging unit (1.5 kg) and the 10,000 page toner cartridge (0.8 kg).
Dimensions for multifunction printer (unpackaged)
Printer model Height Width Depth Weight
MX710 series 727.3 mm (28.6 in.) 548.1 mm (21.6 in.) 578.4 mm (22.8 in.) 43.3 kg (95.4 lb)
MX810 series 914.4 mm (36 in.) 548.1 mm (21.6 in.) 579.0 mm (22.8 in.) 49.9 kg (110 lb)
Printer specifications 18
Page 19
Dimensions of the paper handling options
Option Height
(added to printer)
Width Depth Weight
MS710 and MS810 series
550‑sheet tray 110 mm (4.3 in.) 421 mm (16.6 in.) 510 mm (20.1 in.) 5.8 kg (12.8 lb)
550‑sheet lockable tray 110 mm (4.3 in.) 421 mm (16.6 in.) 510 mm (20.1 in.) 5.9 kg (13.0 lb)
550‑sheet tray insert 110 mm (4.3 in.) 421 mm (16.6 in.) 502 mm (19.8 in.) 1.8 kg (4.0 lb)
250‑sheet tray 85 mm (3.3 in.) 421 mm (16.6 in.) 510 mm (20.1 in.) 5.0 kg (11.0 lb)
250‑sheet lockable tray 79.5 mm (3.1 in.) 421 mm (16.6 in.) 510 mm (20.1 in.) 5.2 kg (11.5 lb)
250‑sheet tray insert 79.5 mm (3.1 in.) 421 mm (16.6 in.) 502 mm (19.8 in.) 1.6 kg (3.5 lb)
2100‑sheet tray 350 mm (13.8 in.) 421 mm (16.6 in.) 510 mm (20.1 in.) 17.7 kg (39.0 lb)
Output expander 165 mm (6.5 in.) 421 mm (16.6 in.) 380 mm (15.0 in.) 2.6 kg (5.7 lb)
High capacity output
expander
310 mm (12.2 in.) 421 mm (16.6 in.) 335 mm (13.2 in.) 4.3 kg (9.5 lb)
4‑bin mailbox 271.5 mm (10.7 in.) 421 mm (16.6 in.) 384 mm (15.1 in.) 6.3 kg (13.9 lb)
Staple finisher
1
246 mm (9.7 in.) 435 mm (17.1 in.) 414 mm (16.3 in.) 6.0 kg (13.2 lb)
Staple, hole punch
finisher
1
246 mm (9.7 in.) 463 mm (18.2 in.) 514 mm (20.2 in.) 10.46 kg (23.1 lb)
MX710 series
250‑sheet tray 80 mm (3.3 in.) 421 mm (16.6 in.) 510 mm (20.1 in.) 3.2 kg (7.0 lb)
550‑sheet tray 110 mm (4.3 in.) 421 mm (16.6 in.) 510 mm (20.1 in.) 5.9 kg (13.1 lb)
2100‑sheet tray 351.5 mm (13.8 in.) 421 mm (16.6 in.) 510 mm (20.1 in.) 17.7 kg (39.0 lb)
MS810 series
550‑sheet tray 110 mm (4.3 in.) 548.0 mm (21.6 in.) 535.3 mm (21.1 in.) 7.0 kg (15.4 lb)
2100‑sheet tray 351.5 mm (13.8 in.) 548.0 mm (21.6 in.) 535.3 mm (21.1 in.) 19.3 kg (42.6 lb)
Staple finisher
222
7.0 kg (15.4 lb)
Offset stacker output
option
222
4.5 kg (9.9 lb)
4‑bin mailbox
222
5.9 kg (13 lb)
1
Weight includes the staple cartridge.
2
Fits within the height, width, and depth of the base MFP.
Dimensions of the supplies and furniture for MS710, MS711, MS810, MS811, and MS812
Option Height Width Length Weight
Supplies shipped with the printer
Lexmark Starter Return
Program toner cartridge
(10K)
125 mm (4.9 in.) 152 mm (6.0 in.) 317 mm (12.5 in.) 0.8 kg (1.8 lb)
Imaging unit 83 mm (3.3 in.) 279 mm (11.0 in.) 324 mm (12.8 in.) 1.5 kg (3.3 lb)
Aftermarket supplies
*
1 cartridge refill contains 5,000 staples.
Printer specifications 19
Page 20
Option Height Width Length Weight
Lexmark toner cartridge
(6K)
125 mm (4.9 in.) 152 mm (6.0 in.) 317 mm (12.5 in.) 0.7 kg (1.5 lb)
Lexmark high yield toner
cartridge (25K)
125 mm (4.9 in.) 152 mm (6.0 in.) 317 mm (12.5 in.) 1.2 kg (2.6 lb)
Lexmark extra high yield
toner cartridge (45K)
125 mm (4.9 in.) 152 mm (6.0 in.) 317 mm (12.5 in.) 1.5 kg (3.3 lb)
Imaging unit 83 mm (3.3 in.) 279 mm (11.0 in.) 324 mm (12.8 in.) 1.5 kg (3.3 lb)
Staples
*
33.25 mm (1.3 in.) 35.75 mm (1.4 in.) 62 mm (2.4 in.) 0.2 kg (0.4 lb)
Furniture
MS810 series caster
base
109.1 mm (4.3 in.)
(added to printer)
693.6 mm (27.3 in.) 595.2 mm (23.4 in.) 23.6 kg (52.0 lb)
Spacer 110 mm (4.3 in.) 510 mm (20.1 in.) 421 mm (16.6 in.) 5.8 kg (12.8 lb)
Swivel cabinet 263 mm (10.4 in.) 476 mm (18.7 in.) 600 mm (23.6 in.) 21.8 kg (48.0 lb)
*
1 cartridge refill contains 5,000 staples.
Dimensions of the furniture for MX710, MX711, MX810, MX811, and MX812
Option Height Width Depth Weight
MX710 series
Caster base 111.6 mm (4.4 in.) 595.2 mm (23.4 in.) 693.6 mm (27.3 in.) 24.5 kg (54 lb)
Footprint not applicable 421.0 mm (16.57 in.) 510.2 mm (20.09 in.) not applicable
MX810 series
Caster base 110.0 mm (4.3 in.) 663.1 mm (26.1 in.) 733.7 mm (28.9 in.) 23.8 kg (52.4 lb)
Clearance requirements
Note: These clearance values are for the most compact operating configuration of the product. Additional clearance
(especially from the front) may be needed to utilize the multipurpose feeder, clear paper misfeed, lift the scanner lid (for
MFPs only), or replace toner and imaging unit.
Clearance requirements for the SFP
Printer model Left side Right side Front Rear Top
MS710, MS711,
MS810, MS811,
MS812
152.4 mm (6 in.) 152.4 mm (6 in.) 508.0 mm (20 in.) 152.4 mm (6 in.) 114.3 mm (4.5 in.)
Clearance requirements for the MFP
Printer model Left side Right side Front Rear Top
MX710, MX711 152.4 mm (6 in.) 152.4 mm (6 in.) 393.7 mm (15.5 in.) 152.4 mm (6 in.) 152.4 mm (6 in.)
MX810, MX811,
MX812
152.4 mm (6 in.) 152.4 mm (6 in.) 393.7 mm (15.5 in.) 152.4 mm (6 in.) 152.4 mm (6 in.)
Printer specifications 20
Page 21
Environmental conditions
Note: When shipping or storing printers, always pack the printer supplies (such as cartridges and photoconductors)
separately.
Environmental specifications for MS710, MS711, MS810, MS811, MS812, MX710, MX711, MX810, MX811, and
MX812
Environment Specifications
Air relative humidity 8 to 80%
Ambient operating environment
1
60 to 90.0°F (15.6 to 32.20°C)
8 to 80% RH
Shock Withstand a drop from 3 cm height (print quality not guaranteed)
Air temperature
Product operating 60 to 90.0°F (15.6 to 32.20°C)
Product power off 50 to 110.0°F (10.0 to 43.30°C)
Wet bulb temperature
Product operating 73.0°F (22.80°C) Maximum
Product power off 80.10°F (26.70°C) Maximum
Cartridge or imaging unit
Short term shipping ‑40 to 110.0°F (‑40 to 43.3°C)
Long term storage
2
34 to 95.0°F (1.1 to 35°C)
8 to 80% RH
1
In some cases, performance specifications (such as paper OCF, cartridge or imaging unit usage) are measured at an ambient
condition.
2
Shelf life of supplies is approximately two years. This shelf life estimate is based on storage in standard office environment at 72°F
(22.2°C) and 45% humidity.
Altitude and atmospheric pressure specifications
Altitude and atmospheric pressure specifications for MS710, MS711, MS810, MS811, MS812, MX710, MX711,
MX810, MX811, and MX812
Environment Specification
Altitude (operating) 0–2896 m (9500 ft)
Altitude (packaged) 0–10363 m (34000 ft)
Atmospheric pressure 74.6 kPa
Printer specifications 21
Page 22
Appendix A: PCL support
PCL emulation commands
= Supported
X = Not supported
Printer model
Command Function
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Decimal 8 Backspace (BS)
Decimal 9 Horizontal Tab (HT)
Decimal 10 Line Feed (LF)
Decimal 12 Form Feed (FF)
Decimal 13 Carrier Return (CR)
Decimal 14 Select Secondary Font (SO)
Decimal 15 Select Primary Font (SI)
Decimal 32 Space (SP)
ESC
E
Printer Reset
ESC
Y
Display Functions On
ESC
Z
Display Functions Off
ESC
z
Print Test Page XXX
ESC
&a#C
Set Horizontal Cursor Position
(Column Number)
ESC
&a#G
Duplex Page Side Selection
ESC
&a#H
Set Horizontal Cursor Position
(in Decipoints)
ESC
&a#L
Set Left Margin
ESC
&a#M
Set Right Margin
ESC
&a#N
Negative Motion XXX
ESC
&a#P
Print Direction
ESC
&a#R
Set Vertical Cursor Position
(Row Number)
ESC
&a#V
Set Vertical Cursor Position
(in Decipoints)
ESC
&b#M
Monochrome Print Mode
ESC
&b#W[data]
Key / Value Pair XXX
ESC
&c#T
Character Text Path Direction
Appendix A: PCL support 22
Page 23
= Supported
X = Not supported
Printer model
Command Function
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
ESC
&d@
Disable Underline
ESC
&d#A
Collation ‑ Collated Copies
(QTY)
ESC
&d#D
Select Underline Type
ESC
&f#F
Set Universal Height
ESC
&f#G
Set Universal Width
ESC
&f#O
Set Universal Feed Direction
ESC
&f#W
Set Universal Custom Name
ESC
&f#S
Push/Pop Cursor
ESC
&f#X
Macro Control
ESC
&f#Y
Set Macro ID
ESC
&k#G
Set Line Termination
ESC
&k#H
Set Horizontal Motion Index
(HMI)
ESC
&k#S
Select Primary and Secondary
Pitch
ESC
&k#W
Text Scale Mode XXX
ESC
&l#A
Set Page Size
ESC
&l#A [optional data]
Set Page Size with Custom Load
Messaging
ESC
&l#C
Set Vertical Motion Index (VMI)
ESC
&l#D
Set Line Spacing
ESC
&l#E
Set Top Margin
ESC
&l#F
Set Text Length
ESC
&l#G
Set Output Bin
ESC
&l#H
Select Paper Feed
ESC
&l#L
Skip Perforation
ESC
&l#O
Select Orientation
ESC
&l#M(b)
Media Type XXX
ESC
&l#P
Set Page Length
ESC
&l#S
Simplex/Duplex
Appendix A: PCL support 23
Page 24
= Supported
X = Not supported
Printer model
Command Function
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
ESC
&l1T
Job Separation XXX
ESC
&l#U
Left (Long-Edge) Offset
Registration
ESC
&l#X
Set Copy Count
ESC
&l#Z
Top (Short-Edge) Offset
Registration
ESC
&n#W [operation] [string id]
Alphanumeric ID
ESC
&p#C
Palette Control
ESC
&p#I
Palette Control ID
ESC
&p#S
Select Palette
ESC
&p#X[data]
Transparent Print Data
ESC
&r#F
Flush All Pages
ESC
&s#C
End-Of-Line Text Wrap
ESC
&t#P
Text Parsing Method
ESC
&u#D
Unit of Measure
ESC
(#
Select Symbol Set
ESC
(#X
Select Font by ID
ESC
(3@
Select Default Primary Font
ESC
(f#W[data]
Define Symbol Set
ESC
(s#B
Select Stroke Weight
ESC
(s#H
Select Pitch
ESC
(s#P
Select Spacing
ESC
(s#S
Select Style
ESC
(s#T
Select Typeface
ESC
(s#V
Select Point Size
ESC
(s#W[data]
Load Character
ESC
)#
Secondary Font Symbol Set XXX
ESC
)#X
Select Secondary Download
Font (by Font ID)
XXX
ESC
)3@
Select Default Secondary Font
Appendix A: PCL support 24
Page 25
= Supported
X = Not supported
Printer model
Command Function
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
ESC
)s#B
Secondary Font Stroke Weight XXX
ESC
)s#H
Secondary Font Pitch XXX
ESC
)s#P
Secondary Font Spacing XXX
ESC
)s#S
Secondary Font Style XXX
ESC
)s#T
Secondary Font Typeface
Selection
XXX
ESC
)s#V
Secondary Font Height
(Point Size)
XXX
ESC
)s#W[data]
Load Font Header
ESC
*b#M
Set Raster Compression Mode
ESC
*b#V[data]
Transfer Raster Data (Plane)
ESC
*b#W[data]
Transfer Raster Data
(Row/Block)
ESC
*b#Y
Y Offset
ESC
*c#A
Horizontal Rectangle Size
(in PCL Units)
ESC
*c#B
Vertical Rectangle Size
(in PCL Units)
ESC
*c#D
Set Font ID
ESC
*c#E
Set Character Code
ESC
*c#F
Font Control
ESC
*c#G
Area Fill ID
ESC
*c#H
Horizontal Rectangle Size
(in Decipoints)
ESC
*c#K
Horizontal Plot Size (in Inches)
ESC
*c#L
Vertical Plot Size (in Inches)
ESC
*c#P
Fill Rectangular Area
ESC
*c#Q
Pattern Control
ESC
*c#R
Symbol Set ID Code
ESC
*c#S
Symbol Set Control
ESC
*c0T
Set Picture Frame Anchor Point
ESC
*c#V
Vertical Rectangle Size
(in Decipoints)
Appendix A: PCL support 25
Page 26
= Supported
X = Not supported
Printer model
Command Function
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
ESC
*c#W[data]
Define Pattern
ESC
*c#X
Picture Frame Horizontal Size
(in Decipoints)
ESC
*c#Y
Picture Frame Vertical Size
(in Decipoints)
ESC
*l#O
Logical Operation
ESC
*l#R
Pixel Placement
ESC
*l#W[data]
Color Lookup Tables XXX
ESC
*m#W[data]
Download Dither Matrix
ESC
*o#M(b)
Print Quality XXX
ESC
*o#Q
Mechanical Print Quality XXX
ESC
*o#W[data]
Driver Configuration
ESC
*p#P
Push/Pop Palette
ESC
*p#R
Set Pattern Reference Point
ESC
*p#X
Set Horizontal Cursor Position
(in PCL Units)
ESC
*p#Y
Set Vertical Cursor Position
(in PCL Units)
ESC
*r#A
Start Raster Graphics
ESC
*r#F
Raster Graphics Presentation
ESC
*r#S
Raster Width (Source)
ESC
*r#T
Raster Height (Source)
ESC
*r#U
Simple Color
ESC
*rB
End Raster Graphics (Version B)
ESC
*rC
End Raster Graphics (Version C)
ESC
*s#I
Inquire Status Readback Entity
ESC
*s1M
Free Space
ESC
*s#T
Set Status Readback Location
Type
ESC
*s#U
Set Status Readback Location
Unit
ESC
*s#X
Echo
Appendix A: PCL support 26
Page 27
= Supported
X = Not supported
Printer model
Command Function
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
ESC
*t#H
Raster Width (Destination)
ESC
*t#I
Gamma Correction
ESC
*t#J
Render Algorithm XXX
ESC
*t#K
Scale Algorithm XXX
ESC
*t#R
Set Resolution
ESC
*t#V
Raster Height (Destination)
ESC
*g#W
Set Raster Configuration XXX
ESC
*v#A
Color Component One
ESC
*v#B
Color Component Two
ESC
*v#C
Color Component Three
ESC
*v#I
Assign Color Index
ESC
*v#N
Source Transparency Mode
ESC
*v#O
Pattern Transparency Mode
ESC
*v#S
Foreground Color
ESC
*v#T
Select Current Pattern
ESC
*v#W[data]
Configure Image Data
ESC
*i#W[data]
Viewing Illuminant XXX
ESC
9
Clear Horizontal Margins
ESC
=
Half Line-Feed
ESC
%#A
Enter HP PCL 5 Mode
ESC
%#B
Enter HP‑GL/2 Mode
Note: The values ‑1, 2, and 3
are not supported by any of
the printers included in this
document.
ESC
%‑12345X
Universal Exit Language (UEL) /
Start of PJL
Appendix A: PCL support 27
Page 28
GL/2 commands
= Supported
X = Not supported
Printer model
Command Function
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
AA Arc Absolute
AC Anchor Corner
AD Define Alternate Font
AR Arc Relative
AT Arc Absolute Three Point
BR Bezier Relative
BZ Bezier Absolute
CF Character Fill
CI Circle
CO Comment
CP Character Plot
CR Color Range
DF Default
DI Absolute Direction
DR Relative Direction
DT Define Label Terminator
DV Define Variable Text Path
EA Edge Rectangle Absolute
EP Edge Polygon
ER Edge Rectangle Relative
ES Extra Space
EW Edge Wedge
FI Primary Font
FN Secondary Font
FP Fill Polygon, Odd/Even
FP Fill Polygon, Non-Zero Winding
FT Fill Type
Appendix A: PCL support 28
Page 29
= Supported
X = Not supported
Printer model
Command Function
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
FT Fill Type - 22
FT Fill Type - 9
IN Initialize
IP Input P1 and P2
IR Input Relative P1 and P2
IW Input Window
LA Line Attributes
LB Label, Default Terminator =
'03'x
LO Label Origin
LO Uses PCL Label Origin
LT Line Type
LM Label Mode XXX
MC Logical Operation
NP Number of Pens
PA Plot Absolute
PC Pen Color
PD Pen Down
PE Polyline Encoded
PM Polygon Mode
PP Pixel Placement
PR Plot Relative
PU Pen Up
PW Pen Width
RA Fill Rectangle Absolute
RF Define Raster Fill
RO Rotate Coordinate System
RR Fill Rectangle Relative
RT Arc Relative Three Point
Appendix A: PCL support 29
Page 30
= Supported
X = Not supported
Printer model
Command Function
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
SA Select Alternate Font
SB Scalable/Bitmapped Fonts
SC Scale
SD Define Standard Font
SI Absolute Character Size
SL Character Slant
SM Symbol Mode
SP Select Pen
SR Relative Character Size
SS Select Standard Font
SV Screened Vectors
SV Screened Vectors - 9, level
TD Transparent Data
TM Threshold Matrix
TR Transparency Mode
UL User Defined Line
WG Fill Wedge
WU Pen Width Units
Appendix A: PCL support 30
Page 31
Appendix B: PJL support
Common variables for both printer languages
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
AUTOCONT
AUTOSELECT XXX
BINDING
BITSPERPIXEL
CLEARABLEWARNINGS
CONTEXTSWITCH XXX
COPIES
CPLOCK
DENSITY
DISKLOCK XXX
DUPLEX
ECONOMODE
FORMATTERNUMBER
FORMLINES
HELDJOBTIMEOUT
HOLD
HOLDKEY
HOLDTYPE
IMAGEADAPT XXX
INTRAY1 XXX
INTRAY2
INTRAY3
INTRAY4
INTRAY5 X
INTRAY1SIZE
Appendix B: PJL support 31
Page 32
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
INTRAY2SIZE
INTRAY3SIZE
INTRAY4SIZE
INTRAY5SIZE X
IOBUFFER XXX
IOSIZE XXX
JOBATTR XXX
JOBNAME
JOBOFFSET
LANG
LOWTONER
MANUALFEED
MEDIASOURCE XXX
MEDIATYPE
MPTRAY
ORIENTATION
OUTBIN
PAGEPROTECT
PAPER
PARALLEL X
PASSWORD
PERSONALITY
POWERSAVE
POWERSAVETIME
PRINTQUALITY XXX
QTY
RENDERMODE XXX
REPEATJOBTIMEOUT
REPRINT
Appendix B: PJL support 32
Page 33
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
RESERVEJOBTIMEOUT
RESOLUTION
RESOURCESAVE
RESOURCESAVESIZE XXX
RET XXX
STRINGCODESET
TIMEOUT
USERNAME
VERIFYJOBTIMEOUT
WIDEA4
Lexmark‑unique PJL variables for both printer languages
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LA5LOADING
LACCESSIBILITYTIMEOUTEXTENSION
LACTIVEBINRESET
LADVANCEDSTATUS
LALARMCONTROL
LAUTOCRLF
LAUTOLFCR
LBAYERSCREENLIMIT
LBLANKPAGES
LBONDLENGTH XXX
LBONDLOADING
LBONDOUTBIN
LBONDTEXTURE
Appendix B: PJL support 33
Page 34
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LBONDWEIGHT
LBOTTOMMARGINOFFSET XXX
LBWLOCK XXX
LCANCEL
LCARDSTOCKLENGTH XXX
LCARDSTOCKLOADING
LCARDSTOCKOUTBIN
LCARDSTOCKTEXTURE
LCARDSTOCKWEIGHT
LCOLLATION
LCOLORBALANCEBLACK XXX
LCOLORBALANCECYAN XXX
LCOLORBALANCEMAGENTA XXX
LCOLORBALANCEYELLOW XXX
LCOLORCORRECTION
LCOLOREDLENGTH XXX
LCOLOREDLOADING
LCOLOREDOUTBIN
LCOLOREDTEXTURE
LCOLOREDWEIGHT
LCOLORMODEL XXX
LCOLORSAVER XXX
LCOLORTRAPPING XXX
LCUSTOMPAPERUNITS
LCUSTOMPAPERWIDTH
LCUSTOMPAPERHEIGHT
LCUSTOMPAPERFEED
LCUSTOMTYPE1LENGTH XXX
LCUSTOMTYPE1LOADING
LCUSTOMTYPE1MEDIA
Appendix B: PJL support 34
Page 35
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LCUSTOMTYPE1NAME
LCUSTOMTYPE1OUTBIN
LCUSTOMTYPE1TEXTURE
LCUSTOMTYPE1WEIGHT
LCUSTOMTYPE2LENGTH XXX
LCUSTOMTYPE2LOADING
LCUSTOMTYPE2MEDIA
LCUSTOMTYPE2NAME
LCUSTOMTYPE2OUTBIN
LCUSTOMTYPE2TEXTURE
LCUSTOMTYPE2WEIGHT
LCUSTOMTYPE3LENGTH XXX
LCUSTOMTYPE3LOADING
LCUSTOMTYPE3MEDIA
LCUSTOMTYPE3NAME
LCUSTOMTYPE3OUTBIN
LCUSTOMTYPE3TEXTURE
LCUSTOMTYPE3WEIGHT
LCUSTOMTYPE4LENGTH XXX
LCUSTOMTYPE4LOADING
LCUSTOMTYPE4MEDIA
LCUSTOMTYPE4NAME
LCUSTOMTYPE4OUTBIN
LCUSTOMTYPE4TEXTURE
LCUSTOMTYPE4WEIGHT
LCUSTOMTYPE5LENGTH XXX
LCUSTOMTYPE5LOADING
LCUSTOMTYPE5MEDIA
LCUSTOMTYPE5NAME
Appendix B: PJL support 35
Page 36
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LCUSTOMTYPE5OUTBIN
LCUSTOMTYPE5TEXTURE
LCUSTOMTYPE5WEIGHT
LCUSTOMTYPE6LENGTH XXX
LCUSTOMTYPE6LOADING
LCUSTOMTYPE6MEDIA
LCUSTOMTYPE6NAME
LCUSTOMTYPE6OUTBIN
LCUSTOMTYPE6TEXTURE
LCUSTOMTYPE6WEIGHT
LDOWNLOADTARGET
LDRYTIMEDELAY XXX
LDUPLEXLEFTMARGINOFFSET XXX
LDUPLEXTOPMARGINOFFSET XXX
LDUPLICATEHELDJOBS
LECOMODE
LENVELOPEENHANCE XXX
LENVELOPELENGTH XXX
LENVELOPEOUTBIN
LENVELOPETEXTURE
LENVELOPEWEIGHT
LESCCHAR
LFAXFOLD XXX
LFAXJOBWAITFORTONER
LFAXREDIAL X
LFAXREDIALFREQUENCY X
LFAXRESOLUTION X
LFAXTRANSMISSIONLOG X
LFOLD XXX
LFEEDERPAPERTYPE XXX
Appendix B: PJL support 36
Page 37
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LFONTDENSITY XXX
LGLOSSYLOADING XXX
LGLOSSYOUTBIN XXX
LGLOSSYTEXTURE XXX
LGLOSSYWEIGHT XXX
LHEAVYGLOSSYLOADING XXX
LHEAVYGLOSSYOUTBIN XXX
LHEAVYGLOSSYTEXTURE XXX
LHEAVYGLOSSYWEIGHT XXX
LHEAVYPAPERLOADING
LHEAVYPAPEROUTBIN
LHEAVYPAPERTEXTURE
LHEAVYPAPERWEIGHT
LHELDJOBPRTORDER
LHIBERNATETIMEOUT
LHIBERNATETIMEOUTOVERRIDE
LHOLEPUNCHALARM
LHOLEPUNCHMODE
LHONORINIT
LIMAGEESS XXX
LIMAGEBRIGHTNESS
LIMAGECONTRAST
LIMAGEENHANCE
LIMAGEENHANCETYPE
LIMAGEORIENTATION
LIMAGESATURATION XXX
LIMAGESMOOTHING XXX
LINFEEDER XXX
LINFEEDERSIZE XXX
LINKALERT XXX
LINMPFEEDERSIZE
Appendix B: PJL support 37
Page 38
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LJAMASSIST
LJAMRECOVERY
LJOBPARKPERSIST XXX
LJOBWAITFORSUPPLIES
LLABELSLENGTH XXX
LLABELSLOADING
LLABELSOUTBIN
LLABELSTEXTURE
LLABELSWEIGHT
LLASTTRAYRENUMBER
LLEFTMARGINOFFSET XXX
LLETTERHEADLENGTH XXX
LLETTERHEADLOADING
LLETTERHEADOUTBIN
LLETTERHEADTEXTURE
LLETTERHEADWEIGHT
LLIGHTPAPERLOADING
LLIGHTPAPEROUTBIN
LLIGHTPAPERTEXTURE
LLIGHTPAPERWEIGHT
LLINEDETAIL
LMANUALCOLORRGBTEXT XXX
LMANUALCOLORRGBGRAPHICS XXX
LMANUALCOLORRGBIMAGE XXX
LMANUALCOLORCMYKTEXT XXX
LMANUALCOLORCMYKGRAPHICS XXX
LMANUALCOLORCMYKIMAGE XXX
LMANUALENVELOPESIZE
LMANUALENVELOPETYPE
LMANUALPAPERSIZE
Appendix B: PJL support 38
Page 39
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LMANUALPAPERTYPE
MICRJOB XXX
LMAXSTATUSMSG XXX
LMPFEEDERPAPERTYPE
LMPFEEDERRENUMBER
LMULTIPAGEBORDER
LMULTIPAGEORDER
LMULTIPAGEPRINT
LMULTIPAGEVIEW
LNPAP
LOPTIONALOUTBIN1NAME
LOPTIONALOUTBIN2NAME
LOPTIONALOUTBIN3NAME
LOPTIONALOUTBIN4NAME
LOPTIONALOUTBIN5NAME XX
LOPTIONALOUTBIN6NAME
XX
LOPTIONALOUTBIN7NAME
XX
LOPTIONALOUTBIN8NAME
XX
LOPTIONALOUTBIN9NAME
XX
LOPTIONALOUTBIN10NAME
XX
LOPTIONALOUTBIN11NAME
XX
LOPTIONALOUTBIN12NAME
XX
LOUTBINCONFIG
LOVERFLOWOUTBIN
LOVERFLOWTIMER
LPAGECOUNT
LPAGEMODE
LPAGESREMAININGDISPLAY
Appendix B: PJL support 39
Page 40
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LPAPERSOURCE
LPICTUREGRADE XXX
LPLAINLENGTH XXX
LPLAINOUTBIN
LPLAINTEXTURE
LPLAINWEIGHT
LPOWERSAVER
LPPDS
LPPDSFORMLINES
LPPDSLINESPERINCH
LPREPRINTEDLENGTH XXX
LPREPRINTEDLOADING
LPREPRINTEDOUTBIN
LPREPRINTEDTEXTURE
LPREPRINTEDWEIGHT
LPRINTBUFFER
LPRINTSCREENS
LPRINTHEADIDLETIME
LPRINTERUSAGE XXX
LPRINTMENUSBUTTON XXX
LPRINTQUALITY XXX
LPUNCH
LQUIETMODE
LREAROUTBINNAME XXX
LRECYCLEDLOADING
LRECYCLEDMEDIA
LRECYCLEDOUTBIN
LRECYCLEDTEXTURE
LRECYCLEDWEIGHT
Appendix B: PJL support 40
Page 41
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LREPEATPRINTLIMIT
LRESET
LRESOURCESAVE
LRIGHTMARGINOFFSET XXX
LROUGHENVELOPELOADING XXX
LROUGHENVELOPEOUTBIN
LROUGHENVELOPETEXTURE
LROUGHENVELOPEWEIGHT
LROUGHPAPERLOADING
LROUGHPAPEROUTBIN
LROUGHPAPERTEXTURE
LROUGHPAPERWEIGHT
LSCREENING XXX
LSEPARATORSHEETS
LSEPARATORSOURCE
LSMALLFONTENHANCER
LSSGALVO XXX
LSTANDARDOUTBINNAME
LSTAPLE
LSTAPLESEMPTYALARM
LSTAPLETESTBIN XXX
LSTAPLETESTSOURCE XXX
LSTROKEWIDTH XXX
LSUBSTITUTESIZE
LTOPBINROTATE
LTOPMARGINOFFSET XXX
LTRANSPARENCYLENGTH XXX
LTRANSPARENCYOUTBIN
LTRANSPARENCYTEXTURE
LTRANSPARENCYWEIGHT
Appendix B: PJL support 41
Page 42
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LTRAY1AUTOSIZE
LTRAY2AUTOSIZE
LTRAY3AUTOSIZE
LTRAY4AUTOSIZE
LTRAY5AUTOSIZE X
LTRAY1PAPERTYPE
LTRAY2PAPERTYPE
LTRAY3PAPERTYPE
LTRAY4PAPERTYPE
LTRAY5PAPERTYPE X
LTRAY1RENUMBER
LTRAY1SENSEDTYPEPAPER XXX
LTRAY1SENSEDTYPETRANSPARENCY XXX
LTRAY2SENSEDTYPEPAPER XXX
LTRAY2SENSEDTYPETRANSPARENCY XXX
LTRAY3SENSEDTYPEPAPER XXX
LTRAY3SENSEDTYPETRANSPARENCY XXX
LTRAY4SENSEDTYPEPAPER XXX
LTRAY4SENSEDTYPETRANSPARENCY XXX
LTRAYINSERTMESSAGEDELAY XXX
LTYPE1FONTS
LUSDEFAULTS
LVINYLLABELSLOADING
LVINYLLABELSOUTBIN
LVINYLLABELSTEXTURE
LVINYLLABELSWEIGHT
LWRITECOVERAGE
Appendix B: PJL support 42
Page 43
Common variables for PCL emulation
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
FONTNUMBER
FONTSOURCE
PITCH
PTSIZE
SYMSET
Lexmark‑unique variables for PCL emulation
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LA4WIDTH
LASSIGNFEEDER XXX
LASSIGNMANUALENVELOPE
LASSIGNMANUALPAPER
LASSIGNMPFEEDER
LASSIGNTRAY1
LASSIGNTRAY2
LASSIGNTRAY3
LASSIGNTRAY4
LASSIGNTRAY5 X
LBITMAPROUNDING
LCOLOREXTENSIONS
LFONTCOMPATIBILITY
LFONTPRIORITY
Appendix B: PJL support 43
Page 44
Common variables for PostScript emulation
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
ADOBEMBT XXX
JAMRECOVERY
PRTPSERRS
Lexmark‑unique variables for PostScript emulation
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LPICTUREGRADE XXX
LPSFONTPRIORITY
Lexmark‑unique LRESOURCE variables
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
LDESCRIPTION
LRWLOCK
LWLOCK
Status Readback commands
= Supported
X = Not supported
Printer model
Command
MS710, MS711,
MS810, MS811,
MS812 MX710, MX711
MX810, MX811,
MX812
DINQUIRE
ECHO
INFO
Appendix B: PJL support 44
Page 45
= Supported
X = Not supported
Printer model
Command
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
INQUIRE
USTATUS
USTATUSOFF
USTATUS JOB
USTATUS unsolicited status variables
= Supported
X = Not supported
Printer model
Variable name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
DEVICE
JOB
PAGE
TIMED
PJL messages for auto-continuable conditions
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
PPDS Font Error
30014
PPDS font error
[50]
Intervention Required
-
Insufficient Collation
Area
30016
Insufficient
Collation Area
[37]
XXX
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
Defrag Memory
[37]
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 45
Page 46
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
Insufficient Memory
30016
Insufficient
memory, some
Held Jobs were
deleted [37]
Memory low, some
held jobs lost
[37]
*
XXX
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
memory, some
Held Jobs were
deleted [37]
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
memory, some
Held Jobs will
not be restored
[37]
XXX
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
memory for Flash
Memory
Defragment
operation [37]
Cannot defrag
flash memory
[37]
*
XXX
Intervention Required
-
Insufficient Collation
Area
30016
Insufficient
memory to
collate job [37]
Cannot collate
large document
[37]
*
XXX
Intervention Required
-
Memory Full
30016
Memory full [38]
Intervention Required
-
Configuration Change
30016
Configuration
Change [57]
XXX
Intervention Required
-
Held Jobs May Not Be
Restored (57
Configuration Change)
30016
Configuration
change, some
held jobs were
not restored
[57]
XXX
Intervention Required
-
Held Jobs May Not Be
Restored
30016
Held Jobs May
Not Be Restored
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 46
Page 47
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
Held Jobs May Not Be
Restored
30016
Some held jobs
were not
restored
XXX
Some held jobs
not restored
*
XXX
Intervention Required
-
Held Jobs May Not Be
Restored
30016
Insufficient
memory, some
held jobs will
not be restored
[37]
XXX
Low memory. Some
held jobs lost.
[37]
*
XXX
Intervention Required
-
Complex Page
30017
Complex page,
some data may
not have printed
[39]
Complex page may
misprint [39]
*
XXX
Intervention Required
-
Parallel Error
30018
Parallel Error
[54]
XXX
Intervention Required
-
Serial Option Error
30018
Serial option
[slot #] error
[54]
XXX
Intervention Required
-
Standard Serial Error
30018
Standard Serial
Error [54]
XXX
Intervention Required
-
Standard Network
Software Error
30018
Standard
network
software error
[54]
Network error,
standard port
[54]
*
XXX
Intervention Required
-
Standard Serial Fax
Connection Lost
30018
Std Ser Fax
Connection Lost
[54]
XXX
Intervention Required
-
Parallel Port Disabled
30018
Parallel Port
Disabled [56]
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 47
Page 48
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
Parallel Port Error
30018
Parallel Port
Disabled [56]
XXX
Intervention Required
-
Serial Option Disabled
30018
Serial [slot #]
Port Disabled
[56]
XXX
Intervention Required
-
Standard Serial
Disabled
30018
Standard Serial
Disabled [56]
XXX
Intervention Required
-
Standard USB Port
Disabled
30018
Standard USB
port disabled
[56]
Rear USB port
disabled [56]
*
XXX
Intervention Required
-
Insufficient Fax Buffer
30026
Insufficient
Fax Buffer [55]
XXX
Intervention Required
-
Std Par ENA
Connection Lost
30027
Std Par ENA
Connection Lost
[54]
XXX
Intervention Required
-
Standard Parallel Port
Disabled
30027
Standard
Parallel Port
Disabled [56]
XXX
Intervention Required
-
Std Parallel Port
Disabled
30027
Std Parallel
Port Disabled
[56]
XXX
Intervention Required
-
Resolution Reduced
30029
Resolution
Reduced [36]
XXX
Intervention Required
-
Print Jobs on Disk
Request
30031
Print Jobs on
Disk? or
Print Jobs on
Disk. Go/Stop?
XXX
Intervention Required
-
Restore Held Jobs.
Go/Stop?
30031
Restore held
jobs?
XXX
Intervention Required
-
Short Paper
30034
Short Paper [34]
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 48
Page 49
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
Short Paper
30034
Incorrect paper
size, open
[source] [34]
Paper too short
[34]
*
XXX
Intervention Required
-
Scheduled
Maintenance
30075
Scheduled
Maintenance
[80]
XXX
Intervention Required
-
Scheduled
Maintenance
30075
Scheduled
maintenance ADF
kit [80]
XXX
Intervention Required
-
Res Save Off Deficient
Memory
30076
Insufficient
memory to
support
Resource Save
feature [35]
Memory low, no
Resource Save
[35]
*
XXX
Intervention Required
-
Insufficient memory
30076
Insufficient
memory to
support
Resource Save
feature [35]
XXX
Intervention Required
-
Resource Save Off
Deficient Memory
30076
Res Save Off
Deficient
Memory [35]
XXX
Intervention Required
-
Insufficient Collation
Area
30076
Insufficient
Collation Area
[37]
XXX
Intervention Required
-
Service Required
30095
Printer service
required [36]
XXX
Intervention Required
-
Empty Box M
30107
Empty Box M
XXX
Intervention Required
-
Empty Hole Punch Box
30107
Empty Hole Punch
Box
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 49
Page 50
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
Insert Box M
30107
Insert Box M
XXX
Intervention Required
-
Insert Staple Cartridge
30107
Insert staple
cartridge
XXX
Intervention Required
-
Insert Stapler
30107
Insert Stapler
XXX
Intervention Required
-
Priming Failed
30107
Priming Failed,
Retry. Go/Stop?
XXX
Intervention Required
-
Network [x] Software
Error
30112
Network [x]
software error
[54]
Intervention Required
-
Serial [x] Fax
Connection Lost
30112
Ser [x] Fax
Connection Lost
[54]
XXX
Intervention Required
-
Serial Option [x] Error
30112
Serial option
[x] error [54]
Intervention Required
-
Serial Port [x] Disabled
30112
Serial port [x]
disabled [56]
XXX
Intervention Required
-
USB Port [x] Disabled
30112
USB port [x]
disabled [56]
XXX
Intervention Required
-
Parallel [x] ENA
Connection Lost
30113
Par [x] ENA
Connection Lost
[54]
XXX
Intervention Required
-
Parallel Port [x]
Disabled
30113
Parallel port
[x] disabled
[56]
Intervention Required
-
Disk Operation Failed
Faxes on Disk
32001
Operation
Failed Faxes on
Disk
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 50
Page 51
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
Disk Operation Failed
Jobs on Disk
32001
Operation
Failed Jobs on
Disk
XXX
Intervention Required
-
Flash Full
32002
Flash Full [52]
XXX
Intervention Required
-
Flash Full
32002
Not enough free
space in flash
memory for
resources [52]
Flash memory
full [52]
*
XXX
Intervention Required
-
Disk Full
32002
Disk full [62]
XXX
Intervention Required
-
Disk Corrupted
32015
Disk Corrupted
XXX
Intervention required -
Disk Corrupted.
Reformat?
32015
Disk Corrupted.
Reformat?
XXX
Intervention required -
Disk Must Be
Formatted
32015
Disk must be
formatted for
use in this
device
XXX
Intervention required -
Too Many Bins
Attached
32030
Too many bins
attached [58]
XXX
Intervention Required
-
Too Many Flash
Options Installed
32030
Too Many Flash
Options [58]
XXX
Intervention Required
-
Too Many Flash
Options Installed
32030
Too many flash
options
installed [58]
XXX
Intervention Required
-
Unformatted Flash
32052
Unformatted
flash detected
[53]
Flash memory
unformatted
[53]
*
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 51
Page 52
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
Unformatted Disk
32052
Unformatted
disk [63]
XXX
Intervention Required
-
Unsupported Disk
Format
32052
Unsupported
Disk Format [64]
XXX
Intervention Required
-
Defective Flash
32056
Defective Flash
[51]
XXX
Intervention Required
-
Defective Flash
32056
Defective flash
detected [51]
Defective flash
memory [51]
*
XXX
Intervention Required
-
Defective Disk
32056
Defective Disk
[61]
XXX
Intervention Required
-
Defective Disk
32056
Remove
defective disk
[61]
XXX
Intervention Required
-
Scheduled
Maintenance
35075
Scheduled
Maintenance
[80]
XXX
Intervention Required
-
Scheduled
Maintenance
40316
Scheduled
Maintenance [x]
[81]
XXX
Intervention Required
-
Belt Life Warning
40038
Belt Life
Warning [80]
XXX
Intervention Required
-
Belt Exhausted
40038
Belt Exhausted
[80]
XXX
Intervention Required
-
Fuser Maintenance
40038
Fuser
Maintenance
[80]
XXX
Intervention Required
-
Fuser Life Warning
40038
Fuser Life
Warning [80]
XXX
Intervention Required
-
Fuser Exhausted
40038
Fuser Exhausted
[80]
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 52
Page 53
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
Fuser/Belt Life
Warning
40038
Fuser/Belt Life
Warning [80]
XXX
Intervention Required
-
Fuser/Belt Exhausted
40038
Fuser/Belt
Exhausted [80]
XXX
Intervention Required
-
ITU Maintenance
40038
ITU Maintenance
[83]
XXX
Intervention Required
-
PJL OP Message
40048
[Pick up text
from 'data1' and
'data2 but not
'userMessage1'
and
'userMessage2']
XXX
Intervention Required
-
PJL ST Message
40049
[Pick up text
from 'data1' and
'data2' but not
'userMessage1'
and
'userMessage2']
XXX
Intervention Required
-
Waste Toner Bottle
Nearly Full
40141
Waste toner
bottle nearly
full [82.xx]
XXX
Intervention Required
-
Photoconductor Low
40204
[Color] imaging
unit low [84.xx]
XXX
Intervention Required
-
Photoconductor Low
40204
[Color]
photoconductor
low [84.xx]
XXX
Intervention Required
-
Transfer Module Life
Warning
40215
Transfer module
life warning
[83.xx]
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 53
Page 54
PJL messages for attendance conditions
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
required -
Disk Corrupted.
Reformat?
32015
Disk
corrupted
XXX
Intervention
Required -
Too Many Bins
Attached
32030
Too many bins
attached [58]
XXX
Intervention
Required -
Too Many Flash
Options Installed
32030
Too many
flash options
installed
[58]
XXX
Intervention
Required -
Disk Problem
32052
Disk problem
XXX
Intervention
Required -
Remove Defective
Disk
32056
Remove
defective
disk [61]
XXX
Intervention
Required -
Defective Flash
32056
Defective
flash
detected [51]
Defective
flash memory
[51]
1
XXX
Intervention
Required -
Insert Hole Punch
Box
40010
Insert Hole
Punch Box
XXX
Intervention
Required -
Insert PC Cartridge
40010
Insert PC
Cartridge
XXX
Intervention
Required -
30 CMYK
2
Print Unit
Missing
40010
CMYK
2
Print
Unit Missing
[30]
XXX
Intervention
Required -
30 Coating Roll
Missing
40010
Coating Roll
Missing [30]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 54
Page 55
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Remove Originals
from Scanner ADF
40019
Remove
originals
from the
scanner
automatic
document
feeder
XXX
Intervention
Required -
Remove Paper
Standard Bin
40019
Remove paper
from standard
output bin
XXX
Intervention
Required -
Install MICR cartridge
40020
Install MICR
cartridge
XXX
Intervention
Required -
Cartridge Life Expired
40021
Cartridge
Life Expired
CMYK
2
XXX
Intervention
Required -
Cartridge Life
Warning
40021
Cartridge
Life Warning
CMYK
2
XXX
Intervention
Required -
Change Cartridge
Invalid Refill
40021
Change
Cartridge
Invalid
Refill
XXX
Intervention
Required -
Close Cover [x]
40021
Close cover
[x]
XXX
Intervention
Required -
Close Cover [x]
40021
Close paper
transport
cover
XXX
Intervention
Required -
Printer Cover Open
40021
Close Cover
XXX
Intervention
Required -
Close Toner Box
Cover
40021
Close Cover
XXX
Intervention
Required -
Close Deflector G
40021
Close
Deflector G
XXX
Intervention
Required -
Close Door
40021
Close Door
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 55
Page 56
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Close Door [x]
40021
Close door
[x]
XXX
Intervention
Required -
Close Door [x]
40021
Close stapler
door
XXX
Intervention
Required -
Close Door Insert
Cartridge
40021
Close door or
insert
cartridge
XXX
Intervention
Required -
Close Finisher Rear
Door
40021
Close
Finisher Rear
Door
XXX
Intervention
Required -
Close Finisher Side
Door
40021
Close
finisher side
door
XXX
Intervention
Required -
Close Finisher Top
Cover
40021
Close
finisher top
cover
XXX
Intervention
Required -
Close Front Door
40021
Close front
or side door
XXX
Intervention
Required -
Close Front Door
40021
Close front
door
XXX
Intervention
Required -
Close Left Side Door
40021
Close left
side door
XXX
Intervention
Required -
Close Low ADF Door
40021
Close lower
automatic
feeder door
XXX
Intervention
Required -
Close Side Door
40021
Close Side
Door
XXX
Intervention
Required -
Close Surface
40021
Close surface
H
XXX
Intervention
Required -
Close Cover
40021
Close top
access cover
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 56
Page 57
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Close Cover and Door
40021
Close top
access cover
and front
door
XXX
Intervention
Required -
Close Door
40021
Close [tray]
door
XXX
Intervention
Required -
Close Tray [x] Top
Cover
40021
Close Tray
[x] Top Cover
XXX
Intervention
Required -
Printer Upper Door
Open
40021
Cover Open,
Close Top
Covers, Close
Door, or
Insert
Cartridge
XXX
Intervention
Required -
Insert Print Cartridge
40021
Insert Print
Cartridge
XXX
Intervention
Required -
Open Cover
40021
Open Cover
XXX
Intervention
Required -
Open Rear Door
40021
Open Rear
Door
XXX
Intervention
Required -
Invalid Refill
40021
Invalid
Refill Change
Cartridge
[30]
XXX
Intervention
Required -
Defective Ink
Cartridge
40021
Defective
Cartridge
CMYK
2
[31]
XXX
Intervention
Required -
Defective Print
Cartridge
40021
Defective
Print
Cartridge
[31]
XXX
Intervention
Required -
Missing Cartridge
40021
Missing
Cartridge
CMYK
2
[31]
XXX
Intervention
Required -
Missing Printhead
40021
Missing
Printhead
[31]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 57
Page 58
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Defective Print
Cartridge
40021
Replace
defective
cartridge
[31]
XXX
Intervention
Required -
Cartridge Missing
40021
Replace
missing
cartridge
[31.xy]
Intervention
Required -
Invalid Refill
40021
Invalid
refill,
change
cartridge
[31.xx]
XXX
Intervention
Required -
Defective Print
Cartridge
40021
Replace
defective
cartridge
[31.xx]
XXX
Intervention
Required -
Defective Print
Cartridge
40021
Replace
defective
print
cartridge
[31.xx]
XXX
Intervention
Required -
Imaging Unit
Defective
40021
Replace
defective
imaging unit
[31.xy]
Intervention
Required -
Unsupported
Cartridge
40021
Unsupported
Cartridge
[32]
XXX
Intervention
Required -
Unsupported CMYK
2
Cartridge
40021
Unsupported
CMYK
2
Cartridge
[32]
XXX
Intervention
Required -
Unsupported Print
Cartridge
40021
Unsupported
Print
Cartridge
[32]
XXX
Intervention
Required -
Unsupported
Printhead
40021
Unsupported
Printhead
[32]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 58
Page 59
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Unsupported
Cartridge
40021
Cartridge
part number
unsupported
by device
[32.xx]
XXX
Intervention
Required -
Tray Size Sense Error
40021
Tray [x] Size
Sense Error
[40]
XXX
Intervention
Required -
Open Bin Exit Tray
40021
Open Bin 1
Exit Tray
[41]
XXX
Intervention
Required -
Cartridge Region
Mismatch
40021
Cartridge
region
mismatch
[42.xy]
XXX
Intervention
Required -
Cartridge Region
Mismatch
40021
Replace
cartridge,
printer
region
mismatch
[42.xy]
Intervention
Required -
Paper Jam
40022
Paper Jam
[2xx]
XXX
Intervention
Required -
Remove Packaging
Material
40025
Remove
packaging
material
XXX
Intervention
Required -
Remove Packaging
Material
40025
Remove
packaging
material,
[area name]
XXX
Intervention
Required -
Waste Toner Missing
40025
Waste toner
bottle
missing [82]
XXX
Intervention
Required -
Waste Toner Bottle
Missing
40025
Waste toner
bottle
missing
[82.xx]
XXX
Intervention
Required -
Check Tray
Connection
40027
Check tray
[paper
source #]
connection
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 59
Page 60
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Install Tray [x] or
Cancel Job
40027
Install tray
[x]
XXX
Intervention
Required -
Install Tray [x] or
Cancel Job
40027
Install Tray
[x] or Cancel
Job
XXX
Intervention
Required -
Install Envelope
Feeder
40028
Install
envelope
feeder
XXX
Intervention
Required -
Install Env Feeder or
Cancel Job
40028
Install Env
Feed or
Cancel Job
XXX
Intervention
Required -
Reattach Envelope
Feeder
40028
Reattach
Envelope
Feeder
XXX
Intervention
Required -
Reattach MP Feeder
40028
Reattach MP
Feeder
XXX
Intervention
Required -
Check Finisher
Installation
40029
Check
Finisher
Installation
XXX
Intervention
Required -
Check Mailbox
Installation
40029
Check Mailbox
Installation
XXX
Intervention
Required -
Install Bin [x] or
Cancel Job
40029
Install
Bin [x] or
Cancel Job
XXX
Intervention
Required -
Reattach Bin
40029
Reattach bin
[x]
XXX
Intervention
Required -
Reattach Bins
40029
Reattach
Bins [bin #x—
bin #y]
XXX
Intervention
Required -Reattach
Output Bin
40029
Reattach
Output Bin
[bin #]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 60
Page 61
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Tray Config Error
40030
Tray [x]
Config Error
[33]
XXX
Intervention
Required -
Input Config Error
40030
Input config
error [58]
XXX
Intervention
Required -
Too Many Bins
Attached
40030
Too Many Bins
Attached [58]
XXX
Intervention
Required -
Too Many Disks
Installed
40030
Too many
disks
installed
[58]
XXX
Intervention
Required -
Too Many Trays
Attached
40030
Too many
trays
attached [58]
XXX
Too many
trays. Remove
some. [58]
1
XXX
Intervention
Required -
Too Many Disks
Installed
40036
Too Many
Disks
Installed
[58]
XXX
Intervention
Required -
PerfectFinish Missing
40037
PerfectFinish
Missing [31]
XXX
Intervention
Required -
PerfectFinish Empty
40037
PerfectFinish
Empty [87]
XXX
Intervention
Required -
Replace Oil Coating
Roll
40038
Replace Oil
Coating Roll
XXX
Intervention
Required -
Replace PC Kit
40038
Replace PC
Kit
XXX
Intervention
Required -
Replace PC Kit To
Continue
40038
Replace PC
Kit To
Continue
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 61
Page 62
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Replace Toner
Cartridge
40038
Replace Toner
Cartridge
XXX
Intervention
Required -
Replace Toner
Cartridge To
Continue
40038
Replace Toner
To Continue
XXX
Intervention
Required -
84 All Photo Devs
Exhausted
40038
All Photo
Devs
Exhausted
[84]
XXX
Intervention
Required -
84 Black Photo Dev
Exhausted
40038
Black Photo
Dev Exhausted
[84]
XXX
Intervention
Required -
84 Black Photo Dev
Life Warning
40038
Black Photo
Dev Life
Warning [84]
XXX
Intervention
Required -
84 Color Photo Dev
Life Warning
40038
Color Photo
Dev Life
Warning [84]
XXX
Intervention
Required -
Cartridge Low
40038
Cartridge Low
[88]
XXX
Intervention
Required -
[Color] Cartridge Low
40038
[Color]
cartridge is
low [88]
XXX
Intervention
Required -
Toner Low
40038
Cartridge low
[88]
XXX
Intervention
Required -
Cartridge Low
40038
Cartridge
Low [CMYK]
[88]
XXX
Intervention
Required -
Toner Low
40038
Toner is low
[88]
XXX
Intervention
Required -
Toner Low
40038
Toner Low
[88]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 62
Page 63
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Toner Low
40038
Yellow Toner
Low [88]
Magenta Toner
Low [88]
Cyan Toner
Low [88]
Black Toner
Low [88]
XXX
Color Print
Cartridge Low
[88]
Black Print
Cartridge Low
[88]
Photo Print
Cartridge Low
[88]
XXX
Yellow Toner
Empty [88]
Magenta Toner
Empty [88]
Cyan Toner
Empty [88]
Black Toner
Empty [88]
XXX
Intervention
Required -
Cartridge Nearly Low
40038
Cartridge
nearly low
[88.xx]
XXX
Intervention
Required -
Cartridge Empty
40039
Cartridge
Empty [CMYK]
[89]
XXX
Intervention
Required -
Load Staples
40040
Load Staples
XXX
Intervention
Required -
Priming Failed.
Retry?
40041
Priming
Failed.
Retry?
XXX
Intervention
Required -
PJL OP Message
40048
OPMSG message
XXX
Intervention
Required -
PJL ST Message
40049
STMSG message
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 63
Page 64
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Replace Fuser
40050
Replace Fuser
XXX
Intervention
Required -
Replace Transfer Kit
40050
Replace
Transfer Kit
XXX
Intervention
Required -
Incompatible Bin [x]
40087
Incompatible
Bin [x] [59]
XXX
Intervention
Required -
Incompatible Bin [x]
40087
Incompatible
output
bin [x] [59]
Intervention
Required -
Incompatible Duplex
40088
Incompatible
Duplex [59]
Intervention
Required -
Incompatible Tray [x]
40089
Incompatible
Tray [x] [59]
Intervention
Required -
Paper Size
Unsupported
40089
Tray [x]
paper size
unsupported
XXX
Intervention
Required -
Incompatible
Envelope Feeder
40090
Incompatible
envelope
feeder [59]
Intervention
Required -
Check Duplex
Connection
40095
Check Duplex
Connection
XXX
Intervention
Required -
Install Duplex or
Cancel Job
40095
Install
Duplex or
Cancel Job
XXX
Intervention
Required -
Install Duplex or
Cancel Job
40095
Install
duplex
XXX
Intervention
Required -
Duplex Cover Open
40096
Close Duplex
Door
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 64
Page 65
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Insert Duplex Option
40096
Insert Duplex
Option
XXX
Intervention
Required -
Insert Hole Punch
Box
40107
Insert the
hole punch
box
XXX
Intervention
Required -
Replace
Photoconductor or
Imaging Unit
40129
Replace
[color]
imaging unit
and [color]
cartridge
[84.xx]
XXX
Intervention
Required -
Replace Color PC
Units
40129
Replace color
PC Units [84]
XXX
Intervention
Required -
Replace
Photoconductor
40129
Replace
[Color]
photoconducto
r [84.xx]
XXX
Intervention
Required -
Replace Waste Toner
Bottle
40141
Replace waste
toner bottle
[82.xx]
XXX
Intervention
Required -
Replace Waste Toner
40141
Replace waste
toner bottle
[82]
XXX
Intervention
Required -
Waste Toner Bottle
Nearly Full
40141
Waste toner
bottle nearly
full [82.xx]
XXX
Intervention
Required -
Waste Toner Nearly
Full
40141
Waste toner
bottle nearly
full [82]
XXX
Intervention
Required -
Transfer Module
Missing
40143
Transfer
module
missing
[83.xx]
XXX
Intervention
Required -
Cartridge Low
40200
Black
cartridge low
[88.xx]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 65
Page 66
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Cartridge Nearly Low
40200
black
cartridge
nearly low
[88.1x]
XXX
Intervention
Required -
Cartridge Very Low
40200
Black
cartridge
very low
[88.xx]
XXX
Intervention
Required -
Replace Cartridge
40200
Replace black
cartridge
[88.2x]
XXX
Intervention
Required -
Cartridge Low
40201
Cyan
cartridge low
[88.xx]
XXX
Intervention
Required -
Cartridge Nearly Low
40201
cyan
cartridge
nearly low
[88.1x]
XXX
Intervention
Required -
Cartridge Very Low
40201
Cyan
cartridge
very low
[88.xx]
XXX
Intervention
Required -
Replace Cartridge
40201
Replace cyan
cartridge
[88.2x]
XXX
Intervention
Required -
Cartridge Low
40202
Magenta
cartridge low
[88.xx]
XXX
Intervention
Required -
Cartridge Nearly Low
40202
magenta
cartridge
nearly low
[88.1x]
XXX
Intervention
Required -
Cartridge Very Low
40202
Magenta
cartridge
very low
[88.xx]
XXX
Intervention
Required -
Replace Cartridge
40202
Replace
magenta
cartridge
[88.2x]
XXX
Intervention
Required -
Cartridge Low
40203
Yellow
cartridge low
[88.xx]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 66
Page 67
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Cartridge Nearly Low
40203
yellow
cartridge
nearly low
[88.1x]
XXX
Intervention
Required -
Cartridge Very Low
40203
Yellow
cartridge
very low
[88.xx]
XXX
Intervention
Required -
Replace Cartridge
40203
Replace
yellow
cartridge
[88.2x]
XXX
Black PC Unit Life
Warning
40204
Black pc unit
life warning
[84]
XXX
Intervention
Required -
Unsupported PC Unit
40204
unsupported
[color]
imaging unit
[84]
XXX
Intervention
Required -
Unsupported PC Unit
40204
unsupported
[color] pc
unit [84]
XXX
Intervention
Required -
Color PC Units Life
Warning
40204
Color PC Unit
Life warning
[84.xx]
XXX
Intervention
Required -
PC Kit Life Warning
40204
PC kit life
warning [84]
XXX
Intervention
Required -
Photoconductor Low
40204
[Color]
photoconducto
r low [84.xx]
XXX
Intervention
Required -
Photoconductor Low
40204
Photoconducto
r low [84]
XXX
Intervention
Required -
Photoconductor
Nearly Low
40204
[color]
photoconducto
r nearly low
[84.xx]
XXX
Intervention
Required -
Transfer Module Life
Warning
40215
Transfer
module life
warning
[83.xx]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 67
Page 68
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Transfer Module
Near Life Warning
40215
Transfer
module near
life warning
[83.xx]
XXX
Intervention
Required -
Fuser Life Warning
40216
Fuser Life
Warning [87]
XXX
Intervention
Required -
Fuser Life Warning
40216
Fuser life
warning
[80.xx]
XXX
Intervention
Required -
Fuser Near Life
Warning
40216
Fuser near
life warning
[80.xx]
XXX
Intervention
Required -
Maintenance Kit Late
Warning
40216
Maintenance
kit very low
[80.xy]
Intervention
Required -
Replace Toner
40300
Replace black
toner[88]
XXX
Intervention
Required -
Unsupported Print
Cartridge
40300
Replace
unsupported
cartridge
[32.xy]
Intervention
Required -
Imaging Unit
Unsupported
40300
Replace
unsupported
imaging unit
[32.xy]
Intervention
Required -
Replace Toner
40301
Replace cyan
toner [88]
XXX
Intervention
Required -
Replace Toner
40302
Replace
magenta toner
[88]
XXX
Intervention
Required -
Replace Toner
40303
Replace
yellow toner
[88]
XXX
Intervention
Required -
Replace PC Kit
40304
Replace PC
Kit [84]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 68
Page 69
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Replace
Photoconductor
40304
Replace
photoconducto
r [84]
XXX
Intervention
Required -
84 Replace Black PC
Unit
40305
Replace black
PC Unit [84]
XXX
Intervention
Required -
Cartridge Part
Number
Unsupported
40309
Black
cartridge
part number
unsupported
by device
[32.xx]
XXX
Intervention
Required -
Replace unsupported
cartridge
40309
Replace
unsupported
black
cartridge
[32.xx]
XXX
Intervention
Required -
Invalid Refill, Change
Cartridge
40309
black invalid
refill,
change
cartridge
[40]
XXX
Intervention
Required -
Cartridge Part
Number
Unsupported
40310
Cyan
cartridge
part number
unsupported
by device
[32.xx]
XXX
Intervention
Required -
Replace unsupported
cartridge
40310
Replace
unsupported
cyan
cartridge
[32.xx]
XXX
Intervention
Required -
Invalid Refill, Change
Cartridge
40310
cyan invalid
refill,
change
cartridge
[40]
XXX
Intervention
Required -
Cartridge Part
Number
Unsupported
40311
Magenta
cartridge
part number
unsupported
by device
[32.xx]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 69
Page 70
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Replace unsupported
cartridge
40311
Replace
unsupported
magenta
cartridge
[32.xx]
XXX
Intervention
Required -
Invalid Refill, Change
Cartridge
40311
magenta
invalid
refill,
change
cartridge
[40]
XXX
Intervention
Required -
Cartridge Part
Number
Unsupported
40312
Yellow
cartridge
part number
unsupported
by device
[32.xx]
XXX
Intervention
Required -
Replace unsupported
cartridge
40312
Replace
unsupported
yellow
cartridge
[32.xx]
XXX
Intervention
Required -
Invalid Refill, Change
Cartridge
40312
yellow
invalid
refill,
change
cartridge
[40]
XXX
Intervention
Required -
Scheduled
Maintenance
40315
Scheduled
maintenance
[x] [80]
Note: [x] indicates
600K kit.
XXX
Intervention
Required -
Replace Transfer
Module
40315
Replace
transfer
module
[83.xx]
XXX
Intervention
Required -
Maintenance Kit Low
40315
Maintenance
kit low
[80.xy]
Intervention
Required -
Maintenance Kit A
EOL
40316
Replace
maintenance
kit to resume
printing
[80.xy]
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 70
Page 71
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Maintenance Kit EOL
(Distinct From AEOL)
40316
Replace
maintenance
kit,
recommended
life exceeded
[80.xy]
Intervention
Required -
Replace Fuser
40316
Replace fuser
[80.xx]
XXX
Intervention
Required -
Replace Fuser
40316
Replace fuser
[87.xx]
XXX
Intervention
Required -
Scheduled
Maintenance
40316
Scheduled
maintenance
[x] [80]
Note: [x] indicates
100K kit.
XXX
Intervention
Required -
Replace Cartridge
40400
Replace
defective or
missing
cartridge
[31.xx]
XXX
Intervention
Required -
Defective of Missing
Cartridge
40400
Reinstall
missing or
unresponsive
cartridge
[31.xy]
Intervention
Required -
Cartridge/Imaging
Unit Region
Mismatch
40404
Cartridge,
imaging unit
mismatch
[41.xy]
Intervention
Required -
Insert
Photoconductor
40404
Insert
photoconducto
r [84]
XXX
Intervention
Required -
Photoconductor
Abnormal
40404
Defective
[color]
imaging unit
[84]
XXX
Intervention
Required -
40404
Photoconducto
r abnormal
[84]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 71
Page 72
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
[Color] PC Unit
Missing
40405
Black PC Unit
missing
[84.41]
XXX
Intervention
Required -
[Color]
Photoconductor
Missing
40405
Black
photoconducto
r missing
[84.41]
XXX
Intervention
Required -
[Color] PC Unit
Missing
40406
Cyan PC Unit
missing
[84.41]
XXX
Intervention
Required -
[Color]
Photoconductor
Missing
40406
Cyan
photoconducto
r missing
[84.41]
XXX
Intervention
Required -
[Color] PC Unit
Missing
40407
Magenta PC
Unit missing
[84.41]
XXX
Intervention
Required -
[Color]
Photoconductor
Missing
40407
Magenta
photoconducto
r missing
[84.41]
XXX
Intervention
Required -
[Color] PC Unit
Missing
40408
Yellow PC
Unit missing
[84.41]
XXX
Intervention
Required -
[Color]
Photoconductor
Missing
40408
Yellow
photoconducto
r missing
[84.41]
XXX
Intervention
Required -
Toner Cartridge
Missing
40409
Missing black
cartridge
and/or black
imaging unit
[30.xx]
XXX
Intervention
Required -
Toner Cartridge
Missing
40409
Black toner
cartridge
missing
[30.xx]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 72
Page 73
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Defective Cartridge
40409
Defective
black
cartridge
[31.xx]
XXX
Intervention
Required -
Missing or Defective
Cartridge
40409
Missing or
defective
black
cartridge
[31.xx]
XXX
Intervention
Required -
Toner Cartridge
Missing
40410
Missing cyan
cartridge
and/or cyan
imaging unit
[30.xx]
XXX
Intervention
Required -
Toner Cartridge
Missing
40410
Cyan toner
cartridge
missing
[30.xx]
XXX
Intervention
Required -
Defective Cartridge
40410
Defective
cyan
cartridge
[31.xx]
XXX
Intervention
Required -
Missing or Defective
Cartridge
40410
Missing or
defective
cyan
cartridge
[31.xx]
XXX
Intervention
Required -
Toner Cartridge
Missing
40411
Missing
magenta
cartridge
and/or
magenta
imaging unit
[30.xx]
XXX
Intervention
Required -
Toner Cartridge
Missing
40411
Magenta toner
cartridge
missing
[30.xx]
XXX
Intervention
Required -
Defective Cartridge
40411
Defective
magenta
cartridge
[31.xx]
XXX
Intervention
Required -
Missing or Defective
Cartridge
40411
Missing or
defective
magenta
cartridge
[31.xx]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 73
Page 74
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Toner Cartridge
Missing
40412
Missing
yellow
cartridge
and/or yellow
imaging unit
[30.xx]
XXX
Intervention
Required -
Toner Cartridge
Missing
40412
Yellow toner
cartridge
missing
[30.xx]
XXX
Intervention
Required -
Defective Cartridge
40412
Defective
yellow
cartridge
[31.xx]
XXX
Intervention
Required -
Missing or Defective
Cartridge
40412
Missing or
defective
yellow
cartridge
[31.xx]
XXX
Intervention
Required -
Fuser Missing
40416
Fuser missing
[80.xx]
XXX
Intervention
Required -
Fuser Missing
40416
Fuser missing
[87.xx]
XXX
Intervention
Required -
Fuser Missing
40416
Replace
missing fuser
[80.xx]
Intervention
Required -
Insert Duplex Pages
in Tray [x]
41202
Reload
printed pages
in Tray [x]
XXX
1
This message applies only to two‑line printer models.
2
This message contains a subset of letters CMYK, where CMYK denotes cyan, magenta, yellow, and black cartridges, respectively.
Appendix B: PJL support 74
Page 75
PJL messages for paper handling
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Tray [x] Empty
11xyy
Tray [paper source
#] Empty
XXX
Intervention
Required -
Tray [x] Missing
12x01
Tray [paper source
#] Missing
XXX
Intervention
Required -
Bin [x] Full
15ww1
Bin [Bin #] Full
XXX
Intervention
Required -
Short Paper
30034
Incorrect paper
size, open [paper
source] [34]
Intervention
Required -
Wrong Paper Size in
Tray [x]
30034
Wrong Paper Size in
Tray [x] [34]
XXX
Intervention
Required -
Wrong Paper Size
Manual Feed
30034
Wrong Paper Size
Manual Feed [34]
XXX
Intervention
Required -
Remove Paper [All
Output Bins]
40019
Remove paper from
all bins
Intervention
Required -
Remove Paper From
All Bins
40019
Remove paper from
all bins
XXX
Intervention
Required -
Remove Paper From
Output Bin [x]
40019
Remove paper from
bin [x]
Intervention
Required -
Remove Paper
Output Bin [bin #]
40019
Remove Paper Output
Bin [bin #]
XXX
Intervention
Required -
Remove Paper
[linked set bin name]
40019
Remove paper from
[linked set bin
name]
Intervention
Required -
Remove Paper
[linked set bin name]
40019
Remove Paper
[linked set bin
name]
XXX
Appendix B: PJL support 75
Page 76
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Remove Paper From
Standard Output Bin
40019
Remove paper from
standard output bin
Intervention
Required -
Remove Paper
Standard Bin
40019
Remove Paper
Standard Bin
XXX
Intervention
Required -
Photoconductor
Exposure Warning
40025
Photoconductor
exposure warning
XXX
Intervention
Required -
Check [Paper Source]
Orientation or
Guides
4100x
Check [paper
source] orientation
or guides
XXX
Intervention
Required -
Check [Paper Source]
Paper Guide
4100x
Check [paper
source] Paper Guide
XXX
Intervention
Required -
Incorrect Media
41xy
Paper changes
needed
Intervention
Required -
Load [paper source]
[Custom Type Name]
[orientation]
41xyy
Load [paper source]
with [Custom Type
Name] [orientation]
Intervention
Required -
Load [paper source]
[Custom String]
[orientation]
41xyy
Load [paper source]
with [Custom
String]
[orientation]
Intervention
Required -
Load [paper source]
[paper size]
[orientation]
41xyy
Load [paper source]
with [paper size]
[orientation]
Intervention
Required -
Load [paper source]
[paper type] [paper
size] [orientation]
41xyy
Load [paper source]
with [paper type]
[paper size]
[orientation]
Appendix B: PJL support 76
Page 77
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Load Manual
Request
41xyy
Load Manual Feeder
with [Custom Type
Name] [orientation]
Intervention
Required -
Load Manual
Request
41xyy
Load Manual Feeder
with [Custom
String]
[orientation]
[orientation]
Intervention
Required -
Load Manual
Request
41xyy
Load Manual Feeder
with [paper size]
[orientation]
Intervention
Required -
Load Manual
Request
41xyy
Load Manual Feeder
with [paper type]
[paper size]
[orientation]
Intervention
Required -
Load Manual
[Custom Type Name]
41xyy
Load single sheet
feeder with [Custom
Type Name]
XXX
Intervention
Required -
Load Manual
[Custom String]
41xyy
Load single sheet
feeder with [Custom
String]
XXX
Intervention
Required -
Load Manual [paper
size]
41xyy
Load single sheet
feeder with [paper
size]
XXX
Intervention
Required -
Load Manual [paper
type] [paper size]
41xyy
Load single sheet
feeder with [paper
type] [paper size]
XXX
Intervention
Required -
Change Request
41xyy
Change [paper
source] to [Custom
Type Name]
XXX
Intervention
Required -
Change Request
41xyy
Change [paper
source] to [Custom
Type Name], load
[orientation]
Intervention
Required -
Change Request
41xyy
Change [paper
source] to [Custom
String]
XXX
Appendix B: PJL support 77
Page 78
= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention
Required -
Change Request
41xyy
Change [paper
source] to [Custom
String] load
[orientation]
Intervention
Required -
Change Request
41xyy
Change [paper
source] to [paper
type] [paper size]
XXX
Intervention
Required -
Change Request
41xyy
Change [paper
source] to [paper
size] load
[orientation]
Intervention
Required -
Change Request
41xyy
Change [paper
source] to [paper
type] [paper size]
load [orientation]
Intervention
Required -
Incorrect Media
41xyy
Incorrect Media
[34]
XXX
Intervention
Required -
Insert Duplex Pages
& Press Go.
412yy
Insert Duplex Pages
& Press Go.
XXX
Intervention
Required -
Insert Tray [x]
4300x
Insert tray [x]
PJL messages for paper jams
= Supported
X = Not supported
Printer model
Message Status code
MS710, MS711, MS810,
MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required -
Paper Jam
4200x XXX
Intervention Required -
Paper Jam
4200z
Intervention Required -
Paper Jam
4201x XXX
w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number.
z represents the bin number.
Appendix B: PJL support 78
Page 79
= Supported
X = Not supported
Printer model
Message Status code
MS710, MS711, MS810,
MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required -
Paper Jam
4201z
Intervention Required -
Paper Jam
4202x XXX
Intervention Required -
Paper Jam
4202z
Intervention Required -
Paper Jam
4203x XXX
Intervention Required -
Paper Jam
4203z
Intervention Required -
Paper Jam
4204x XXX
Intervention Required -
Paper Jam
4205x XXX
Intervention Required -
Paper Jam
4206x XXX
Intervention Required -
Paper Jam
4207x XXX
Intervention Required -
Paper Jam
4208x XXX
Intervention Required -
Paper Jam
4209x XXX
Intervention Required -
Paper Jam
4210x XXX
Intervention Required -
Paper Jam
4211x XXX
Intervention Required -
Paper Jam
4220x XXX
Intervention Required -
Paper Jam
4221x XXX
Intervention Required -
Paper Jam
4222x XXX
Intervention Required -
Paper Jam
4230x XXX
Intervention Required -
Paper Jam
4230z
w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number.
z represents the bin number.
Appendix B: PJL support 79
Page 80
= Supported
X = Not supported
Printer model
Message Status code
MS710, MS711, MS810,
MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required -
Paper Jam
4231x XXX
Intervention Required -
Paper Jam
4231z XXX
Intervention Required -
Paper Jam
4232x XXX
Intervention Required -
Paper Jam
4233x XXX
Intervention Required -
Paper Jam
4234 XXX
Intervention Required -
Paper Jam
424yx XXX
Intervention Required -
Paper Jam
424xz
Intervention Required -
Paper Jam
4241wy XXX
Intervention Required -
Paper Jam
4241z XXX
Intervention Required -
Paper Jam
4242wy XXX
Intervention Required -
Paper Jam
4242z XXX
Intervention Required -
Paper Jam
4243w XXX
Intervention Required -
Paper Jam
4243z XXX
Intervention Required -
Paper Jam
4244wy XXX
Intervention Required -
Paper Jam
4244z XXX
Intervention Required -
Paper Jam
4245w XXX
Intervention Required -
Paper Jam
4246w XXX
Intervention Required -
Paper Jam
4247wy XXX
w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number.
z represents the bin number.
Appendix B: PJL support 80
Page 81
= Supported
X = Not supported
Printer model
Message Status code
MS710, MS711, MS810,
MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required -
Paper Jam
4248w XXX
Intervention Required -
Paper Jam
4249w XXX
Intervention Required -
Paper Jam
4250w XXX
Intervention Required -
Paper Jam
4250x XXX
Intervention Required -
Paper Jam
4250z
Intervention Required -
Paper Jam
4251wy XXX
Intervention Required -
Paper Jam
4251x XXX
Intervention Required -
Paper Jam
4252w XXX
Intervention Required -
Paper Jam
4253w XXX
Intervention Required -
Paper Jam
4254wy XXX
Intervention Required -
Paper Jam
4255 XXX
Intervention Required -
Paper Jam
4256w XXX
Intervention Required -
Paper Jam
4257w XXX
Intervention Required -
Paper Jam
4258w XXX
Intervention Required -
Paper Jam
4259wy XXX
Intervention Required -
Paper Jam
4260w XXX
Intervention Required -
Paper Jam
4260x XXX
Intervention Required -
Paper Jam
4260z
w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number.
z represents the bin number.
Appendix B: PJL support 81
Page 82
= Supported
X = Not supported
Printer model
Message Status code
MS710, MS711, MS810,
MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required -
Paper Jam
4261w XXX
Intervention Required -
Paper Jam
4261x XXX
Intervention Required -
Paper Jam
427xz XXX
Intervention Required -
Paper Jam
427zx XXX
Intervention Required -
Paper Jam
4271 XXX
Intervention Required -
Paper Jam
4271z XXX
Intervention Required -
Paper Jam
4272 XXX
Intervention Required -
Paper Jam
4272z XXX
Intervention Required -
Paper Jam
4273 XXX
Intervention Required -
Paper Jam
4280w XXX
Intervention Required -
Paper Jam
4280x XXX
Intervention Required -
Paper Jam
4280z XXX
Intervention Required -
Paper Jam
4281w XXX
Intervention Required -
Paper Jam
4281x XXX
Intervention Required -
Paper Jam
4281z
Intervention Required -
Paper Jam
4282w XXX
Intervention Required -
Paper Jam
4282x XXX
Intervention Required -
Paper Jam
4282z XXX
w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number.
z represents the bin number.
Appendix B: PJL support 82
Page 83
= Supported
X = Not supported
Printer model
Message Status code
MS710, MS711, MS810,
MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required -
Paper Jam
4283w XXX
Intervention Required -
Paper Jam
4283x XXX
Intervention Required -
Paper Jam
4283z XXX
Intervention Required -
Paper Jam
4284w XXX
Intervention Required -
Paper Jam
4284x XXX
Intervention Required -
Paper Jam
4284z XXX
Intervention Required -
Paper Jam
4285w XXX
Intervention Required -
Paper Jam
4285z XXX
Intervention Required -
Paper Jam
4286w XXX
Intervention Required -
Paper Jam
4286z XXX
Intervention Required -
Paper Jam
4287 XXX
Intervention Required -
Paper Jam
4287z XXX
Intervention Required -
Paper Jam
4288 XXX
Intervention Required -
Paper Jam
4288z XXX
Intervention Required -
Paper Jam
4289 XXX
Intervention Required -
Paper Jam
4289z XXX
Intervention Required -
Paper Jam
4290 XXX
Intervention Required -
Paper Jam
4291 XXX
w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number.
z represents the bin number.
Appendix B: PJL support 83
Page 84
= Supported
X = Not supported
Printer model
Message Status code
MS710, MS711, MS810,
MS811, MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required -
Paper Jam
4292 XXX
Intervention Required -
Paper Jam
4293 XXX
Intervention Required -
Paper Jam
4294 XXX
Intervention Required -
Paper Jam
4295 XXX
w indicates that this message includes a letter indicating a door or cover that needs to be opened.
x represents the number of jammed pages in the printer.
y represents the tray number.
z represents the bin number.
Service errors
= Supported
X = Not supported
Printer model
Message Error code
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
ALL SERVICE MESSAGES 50000 XXX
Device attendance messages
= Supported
X = Not supported
Printer model
Message
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
RDYMSG XXX
OPMSG
STMSG
Lexmark‑unique PJL commands
These commands are Lexmark extensions which have been added to the PJL command set to provide the user with remote
control of many printer functions.
Appendix B: PJL support 84
Page 85
= Supported
X = Not supported
Printer model
Command
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Common file system commands
• LFORMAT
• LDEFRAG
• LOPENFILE
• LCLOSEFILE
• LREADFILE
• LWRITEFILE
• LRUNFILE
• LRENAMEFILE
• LDELETEFILE
File and device protection commands
• LDECLARE
• LDELETEPASSWORD
• LQUERYSEED
• LBYPASSPASSWORD
LBEEP
LENGINEPRT
LENTERRETAILMODE XXX
LESCAPECHAR
LEXITRETAILMODE XXX
LFAX PHONENUMBER X
LFLASH XXX
LINITIALIZEPRINTER XXX
LPORTROTATE
LPRINT testpage
• LPRINTDIRECTORY
• LPRINTTESTPAGE
• LPRINTMENUS
• LPRINTPCLFONTS
Appendix B: PJL support 85
Page 86
= Supported
X = Not supported
Printer model
Command
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
• LPRINTPSFONTS
• LPRINTDIAG1TEST
• LPRINTDIAG2TEST
• LPRINTDIAG3TEST
LPROGRAM XXX
LPROGRAMADAPTOR
LPROGRAMCOFF
LPROGRAMENG
LPROGRAMRIP
LWRITEOM
Appendix B: PJL support 86
Page 87
Appendix C: PostScript support
Supplemental operators
= Supported
X = Not supported
Printer model
Operator name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
appletalktype
buildtime
byteorder
checkpassword
currentfilenameextend
currentmanualduplexmode
currentuniversalsize
defaulttimeouts XXX
deletefile
devcontrol
devdismount
devforall
devformat
devmount
devstatus
diskonline
diskstatus
displayoperatormsg
doidlefonts
dojamrecovery
doprinterrors
doret XXX
dostartpage
dosysstart
duplexer
Appendix C: PostScript support 87
Page 88
= Supported
X = Not supported
Printer model
Operator name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
duplexmode
enginesync
file
filenameforall
fileposition
firstside
fontnonzerowinding
hardwareiomode
idlefonts
ignoresize
initializedisk
jobname
jobsource
jobtimeout XXX
manualfeed
manualfeedtimeout XXX
newsheet
pagecount
pagesprinted
papertray
printername
product
PS2fonts
PS3fonts
quiet
ramsize
realformat
renamefile
Appendix C: PostScript support 88
Page 89
= Supported
X = Not supported
Printer model
Operator name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
resolution
revision
sccbatch
sccinteractive
setcoverpage XXX
setdefaulttimeouts XXX
setdoidlefonts
setdojamrecovery
setdoprinterrors
setdoret XXX
setdostartpage
setdosysstart
setduplexmode
setenginesync
setethernetaddress
setfilenameextend
setfileposition
sethardwareiomode
setidlefonts
setignoresize
setjobtimeout XXX
setmanualduplexmode
setpapertray
setprintername
setquiet
setresolution
setsccbatch
setsccinteractive
setsoftwareiomode
Appendix C: PostScript support 89
Page 90
= Supported
X = Not supported
Printer model
Operator name
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
settumble
setuniversalsize
setuserdiskpercent
softwareiomode
tumble
userdiskpercent
waittimeout XXX
Page device parameters
= Supported
X = Not supported
Printer model
Key
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
BeginPage
Collate
DeferredMediaSelection
DeviceRenderingInfo
• Screening
XXX
‑ ColorGrade XXX
‑ PictureGrade XXX
‑ IET XXX
‑ IETImagesOnly XXX
‑ IETPictureGrade XXX
‑ None XXX
• TonerSaver
XXX
• PictureGrade
XXX
• ImageEnhancement
• ImageEnhancementType
• PrintDarkness
• AutoMediaType
Appendix C: PostScript support 90
Page 91
= Supported
X = Not supported
Printer model
Key
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
• EdgeToEdge
• DefaultPoliciesPageSize
XXX
• SubstituteSize
• LineDetail
• Type
• ColorCorrection
• ColorBalance
XXX
• ColorSaver
XXX
• ImageBrightness
• Imageess
XXX
• ImageContrast
• ImageSaturation
XXX
• ManualColor
XXX
• PrintQuality
XXX
Duplex
EndPage
ExitJamRecovery
HWResolution
ImagingBBox
InputAttributes
• 0 - Tray 1
• 1 - Tray 2
• 2 - Envelope Feeder
XXX
• 3 - Tray 3
• 4 - Multipurpose Feeder
• 5 - Tray 4
• 6 - Tray 5
‑ PageSize
‑ MatchAll
Appendix C: PostScript support 91
Page 92
= Supported
X = Not supported
Printer model
Key
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
‑ MediaColor
‑ MediaType
‑ MediaWeight
‑ InputLocation
• Mode
• Priority
Install
Jog
ManualFeed
ManualFeedTimeout
MediaColor
MediaPosition
MediaType
MediaWeight
NumCopies
Nup
NupDetails
• Rows
• Columns
• Orientation
• Border
• Order
• Type
• LandscapeOverride
OutputAttributes
• 0 - Standard Bin
‑ OutputType
‑ OutputLocation
Appendix C: PostScript support 92
Page 93
= Supported
X = Not supported
Printer model
Key
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
‑ PunchModesSupported XXX
• 1 - Optional Bin 1
‑ OutputType
‑ OutputLocation
• 2 - Optional Bin 2
‑ OutputType
‑ OutputLocation
• 3 - Optional Bin 3
‑ OutputType
‑ OutputLocation
• 4 - Optional Bin 4
‑ OutputType
‑ OutputLocation
• 5 - Optional Bin 5
XX
‑ OutputType
XX
‑ OutputLocation
XX
• 6 - Optional Bin 6
XX
‑ OutputType
XX
‑ OutputLocation
XX
• 7 - Optional Bin 7
XX
‑ OutputType
XX
‑ OutputLocation
XX
• 8 - Optional Bin 8
XX
‑ OutputType
XX
‑ OutputLocation
XX
• 9 - Optional Bin 9
XX
‑ OutputType
XX
‑ OutputLocation
XX
Appendix C: PostScript support 93
Page 94
= Supported
X = Not supported
Printer model
Key
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
• 10 - Optional Bin 10
XX
‑ OutputType
XX
‑ OutputLocation
XX
• Priority
OutputPage
OutputType
PageDeviceName
PageSize
Policies
• PageSize
• PolicyNotFound
• PolicyReport
PostRenderingEnhance XXX
PostRenderingEnhanceDetails XXX
• REValue
XXX
• Type
XXX
PowerSave
ProcessColorModel XXX
Punch
SlipSheet XXX
SlipSheetDetails
• SlipSheetSource
• Type
Staple
TraySwitch
Tumble
UniversalDetails
Appendix C: PostScript support 94
Page 95
User interpreter parameters
= Supported
X = Not supported
Printer model
Key Default
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
AccurateScreens false
CollatedCopies Collation - Collated Copies
(QTY) value
HalftoneMode 0
IdiomRecognition true
JobName ( )
JobTimeout JobTimeout system parameter
MaxDictStack 255
MaxExecStack 10015
MaxFontItem 12500
MaxFormItem 100000
MaxLocalVM 2147483647
MaxOpStack 100000
MaxPatternItem 20000
MaxScreenItem 48000
MaxSuperScreen 1024
MaxUPathItem 5000
MinFontCompress 2147483647
PageCount 0
UseOldcopypage false
VMReclaim 0
VMThreshold 25000 per MB of RAM
WaitTimeout WaitTimeout system
parameter
Appendix C: PostScript support 95
Page 96
System interpreter parameters
= Supported
X = Not supported
Printer model
Key
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
BuildTime
ByteOrder
CurDisplayList
CurFontCache
CurFormCache
CurInputDevice
CurOutlineCache
CurOutputDevice
CurPatternCache
CurScreenStorage
CurSourceList
CurUPathCache
DisableFastProcs
DoPrintErrors
DoStartPage
EnableExtraFonts
EngineBoot
EngineCode
EngineSpeed
EnvironmentSave
FactoryDefaults
FatalErrorAddress
FontResourceDir
FontVersion
GenericResourceDir
GenericResourcePathSep
InstalledRam
Appendix C: PostScript support 96
Page 97
= Supported
X = Not supported
Printer model
Key
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
JobTimeout
languagelevel
MaxDisplayList
MaxDisplayAndSourceList
MaxFontCache
MaxFormCache
MaxImageBuffer
MaxOutlineCache
MaxPatternCache
MaxPermanentVM
MaxRasterMemory
MaxScreenStorage
MaxSourceList
MaxUPathCache
PageCount
PanelCode
PrinterCode
PrinterName
RamSize
RealFormat
Revision
SearchBuiltinFontsFirst
SerialNumber
StartJobPassword
StartupMode
StaticRamSize
SystemParamsPassword
UseOldcopypage
Appendix C: PostScript support 97
Page 98
= Supported
X = Not supported
Printer model
Key
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
UseOldfonts
ValidNV
WaitTimeout
Devices supported
= Supported
X = Not supported
Printer model
Device
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
%AppSocketA%
%AppSocketB%
%AppSocketC%
%AppSocketD%
%CalendarA%
%CalendarB%
%CalendarC%
%CalendarD%
%Console%
%disk1%
%Engine%
%EthernetPhysicalA%
%EthernetPhysicalB%
%EthernetPhysicalC%
%EthernetPhysicalD%
%EtherTalkA%
%EtherTalkB%
%EtherTalkC%
%EtherTalkD%
Appendix C: PostScript support 98
Page 99
= Supported
X = Not supported
Printer model
Device
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
%flash1%
%IP_A%
%IP_B%
%IP_C%
%IP_D%
%IR_A%
%IR_B%
%IR_C%
%IR_D%
%LexLinkA% XXX
%LexLinkB% XXX
%LexLinkC% XXX
%LexLinkD% XXX
%LocalTalkA%
%LocalTalkB%
%LocalTalkC%
%LocalTalkD%
%LPR_A%
%LPR_B%
%LPR_C%
%LPR_D%
%ParallelA%
%ParallelB%
%ParallelC%
%ParallelD%
%PrintServerA% XXX
%PrintServerB% XXX
%PrintServerC% XXX
%PrintServerD% XXX
Appendix C: PostScript support 99
Page 100
= Supported
X = Not supported
Printer model
Device
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
%PrinterServerA%
%PrinterServerB%
%PrinterServerC%
%PrinterServerD%
%RemotePrinterA%
%RemotePrinterB%
%RemotePrinterC%
%RemotePrinterD%
%rom%
%SerialA%
%SerialB%
%SerialC%
%SerialD%
%TokenRingPhysicalA%
%TokenRingPhysicalB%
%TokenRingPhysicalC%
%TokenRingPhysicalD%
%TokenTalkA%
%TokenTalkB%
%TokenTalkC%
%TokenTalkD%
%USB_A%
%USB_B%
%USB_C%
%USB_D%
Appendix C: PostScript support 100
Loading...