Lexmark 910 Series, P915, 21B0807 - P 915 Color Inkjet Printer, Consumer Inkjet, Beo4 Quick Manual
1
2
3
1
3
2
Lift the paper
support and extend
the paper exit tray.
Load the paper.
Lower the paper feed guard,
squeeze the paper guide, and slide
it to the left edge of the paper.
Load paper
1 3
1
2
1
2
4
1
2
3
5 Press to print
an alignment page.
You may discard the
alignment page after it
prints.
6
Open the
access cover.
Remove the sticker and tape f rom
the bottom of the print cartridges.
Open the cartridge lids, insert the cartridges,
and snap the cartridge lids closed.
Warning: Do not touch the copper
contact area on the back or the metal
print cartridge nozzles on the bottom.
If you are using your
printer with a
computer, continue
with “Install the
software”...
2
Reminder: Save the print
cartridge storage unit to
protect new or partially used
cartridges.
Remove the photo
cartridge from the
print cartridge storage
unit.
www.lexmark.com
Safety information
• Use only the power supply provided with this product or the manufacturer's aut horiz ed
replacement power supply.
• Connect the power supply cord to an electrical outlet that is near the product and easily
accessible.
• Refer service or repairs, other than those described in the user do cu mentation, to a professional
service person.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as the
power supply or telephone, during a lightning storm.
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~
Note: Contents may vary.
Unpack your printer
1
*11X1111*
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~
?
?
?
?
?
?
http://support.lexmark.com/
910 Series
1
1
2
Prepare the printer
2
Connect the power
cord.
Make sure the Pow er
light is on.
2
3
2
1
Press + to scroll to
your language, and
then press .
Install the print cartridges
4
Please save this sheet for future reference.
3
Close the
access cover.
1
2
1
1
1
2
2
P/N 11X1111 E.C. 1X1111
© 2004 LexmarkInternational, Inc. All rights reserved.
Symptom Diagnosis Solution
The Power light is not lit Is the power cord pushed all the way into the printer? Disconnect the power cord from the wall outlet, and then from the printer. Reconnect
the power cord by pushing it all the w a y into the conn ector on the p rinter, an d then int o
the wall outlet.
Is the printer connected to a working electrical outlet? Connect the printer to an electrical outlet that other electrical devices have been using.
Software will not install Is your operating system compatible with the printer? The printer supports these operating systems:
• Windows 98, Windows Me, Windows 2000, and Windows XP
• Mac OS X versions 10.1.5, 10.2.3–2.8, and 10.3.0–3.4.
The control panel displays text
in the wrong language
Did you select a language? 1 Press Menu.
2 Press the down arrow button until you reach the last item.
3 Press the up arrow button twice.
4 Press the right arrow button until the language you want appears on the control
panel display .
5 Press Select to select that language.
• Refer to your User’s Guide.
• Visit our Web site: http://support.lexmark.com/.
• Call us at 1-800-332-4120.
Monday–Friday (9:00 AM–9:00 PM EST)
Saturday (Noon–6:00 PM EST)
Note: Phone number and support times may change without notice.
Record the following infor mation (located on your store receipt and the back
of your printer) and have it ready when you contact us so that we may serve
you faster:
Machine Type number_____________________________
Serial number____________________________________
Date purchased__________________________________
Store where purchased____________________________
1
2
If the installation screen
does not run automatically ,
double-click:
Make sure your computer is on and
attach the USB cable to your printer and
computer.
Make sure your computer is on
and attach the USB cable to your
printer and computer.
Insert the CD.
Follow the instructions
on the screen to
complete the
installation.
To prevent errors during
installation, be sure to:
1 Close all open programs.
2 Temporarily disable any
antivirus software. For help,
refer to your program
documentation or contact the
software manufacturer for
support.
Important: After installation is
complete, remember to re-enable
your antivirus software.
2
Windows 2000/XP
Windows 98/Me
3
Insert the CD and click Install.
Follow the instructions on your screen to
complete the installation.
If this install screen does not appear, click
Start
Æ Run, and type D:\setup.exe, where
D is the letter of your CD-ROM drive.
Click Cancel on all New Hardware windows.
To prevent errors during installation, be
sure to:
1 Close all open programs.
2 Temporarily disabl e any antivirus
software. For help, refer to your
program documentation or conta ct the
software manufacturer for support.
Important: After installation is complete,
remember to re-enable your antivirus
software.
5
• 31 • 32
• 34
• 33
• 35
(Windows) Install the software
(Macintosh) Install the software
Need ink?
Setup troubleshooting
Have a question?
Loading...