Lexmark 42C0043 User Manual

Download

C2240, C2325, C2425, C2535, CS421, CS521, CS622

User's Guide

July 2018 www.lexmark.com

Machine type(s):

5029

Model(s):

038, 230, 238, 430, 438, 636, 696

Contents 2

Safety information........................................................................................ 6

Conventions.......................................................................................................................................................... 6

Product statements............................................................................................................................................. 6

Learning about the printer...........................................................................9

Finding information about the printer.............................................................................................................9

Selecting a location for the printer................................................................................................................. 11

Printer conﬁgurations........................................................................................................................................12

Attaching cables................................................................................................................................................. 13

Using the control panel.............................................................................. 14

Lexmark C2325..................................................................................................................................................14

Lexmark CS421, Lexmark CS521, Lexmark C2425, and Lexmark C2535......................................15

Lexmark CS622 and Lexmark C2240........................................................................................................ 16

Understanding the status of the power button and indicator light.......................................................16

Setting up and using the home screen applications.............................. 17

Using the home screen.....................................................................................................................................17

Customizing the home screen........................................................................................................................18

Using Display Customization...........................................................................................................................18

Conﬁguring Eco‑Settings................................................................................................................................. 19

Creating a Cloud Connector proﬁle..............................................................................................................19

Setting up Device Quotas................................................................................................................................19

Using QR Code Generator..............................................................................................................................20

Using Customer Support.................................................................................................................................20

Managing bookmarks...................................................................................................................................... 20

Managing contacts.............................................................................................................................................21

Setting up and using the accessibility features..................................... 24

Activating Voice Guidance..............................................................................................................................24

Navigating the screen using gestures.........................................................................................................24

Enabling Magniﬁcation mode........................................................................................................................ 25

Adjusting the Voice Guidance speech rate................................................................................................25

Using the keyboard on the display...............................................................................................................25

Enabling spoken passwords or personal identiﬁcation numbers........................................................ 25

Contents 3

Loading paper and specialty media.........................................................26

Setting the paper size and type.................................................................................................................... 26

Conﬁguring Universal paper settings.......................................................................................................... 26

Loading trays......................................................................................................................................................26

Loading the multipurpose feeder................................................................................................................. 28

Loading the manual feeder............................................................................................................................ 30

Linking trays........................................................................................................................................................30

Paper support..............................................................................................32

Supported paper sizes.....................................................................................................................................32

Supported paper types....................................................................................................................................34

Supported paper weights............................................................................................................................... 35

Printing.........................................................................................................37

Printing from a computer.................................................................................................................................37

Printing from a mobile device.........................................................................................................................37

Printing from a ﬂash drive............................................................................................................................... 38

Supported ﬂash drives and ﬁle types.......................................................................................................... 39

Conﬁguring conﬁdential jobs.........................................................................................................................40

Printing conﬁdential and other held jobs....................................................................................................40

Printing from a Cloud Connector proﬁle...................................................................................................... 41

Printing a font sample list.................................................................................................................................41

Printing a directory list..................................................................................................................................... 42

Understanding the printer menus............................................................43

Menu map............................................................................................................................................................43

Device...................................................................................................................................................................44

Print.......................................................................................................................................................................56

Paper.................................................................................................................................................................... 65

USB Drive............................................................................................................................................................66

Network/Ports.................................................................................................................................................... 68

Security................................................................................................................................................................ 80

Reports.................................................................................................................................................................88

Help.......................................................................................................................................................................88

Troubleshooting.................................................................................................................................................89

Printing the Menu Settings Page...................................................................................................................89

Contents 4

Securing the printer................................................................................... 90

Locating the security slot................................................................................................................................90

Erasing printer memory...................................................................................................................................90

Erasing printer hard disk memory.................................................................................................................90

Encrypting the printer hard disk.....................................................................................................................91

Restoring factory default settings.................................................................................................................. 91

Statement of Volatility....................................................................................................................................... 91

Maintaining the printer.............................................................................. 93

Networking..........................................................................................................................................................93

Cleaning the printer..........................................................................................................................................94

Ordering parts and supplies...........................................................................................................................95

Replacing parts and supplies.........................................................................................................................99

Moving the printer............................................................................................................................................. 111

Saving energy and paper............................................................................................................................... 112

Recycling.............................................................................................................................................................113

Clearing jams..............................................................................................114

Avoiding jams.....................................................................................................................................................114

Identifying jam locations................................................................................................................................. 115

Paper jam in trays............................................................................................................................................. 116

Paper jam in door A..........................................................................................................................................116

Paper jam in the standard bin........................................................................................................................119

Paper jam in the multipurpose feeder........................................................................................................120

Paper jam in the manual feeder....................................................................................................................121

Troubleshooting........................................................................................ 122

Network connection problems.....................................................................................................................122

Hardware options problems......................................................................................................................... 124

Issues with supplies........................................................................................................................................ 125

Paper feed problems.......................................................................................................................................127

Printing problems.............................................................................................................................................130

Color quality problems...................................................................................................................................155

Contacting customer support.......................................................................................................................158

Upgrading and migrating.........................................................................159

Hardware........................................................................................................................................................... 159

Contents 5

Software............................................................................................................................................................. 165

Firmware............................................................................................................................................................ 165

Notices........................................................................................................167

Index........................................................................................................... 180

Safety information 6

Safety information

Conventions

Note: A note identiﬁes information that could help you.

Warning: A warning identiﬁes something that could damage the product hardware or software.

CAUTION: A caution indicates a potentially hazardous situation that could injure you.

Dierent types of caution statements include:

CAUTION—POTENTIAL INJURY: Indicates a risk of injury.

CAUTION—SHOCK HAZARD: Indicates a risk of electrical shock.

CAUTION—HOT SURFACE: Indicates a risk of burn if touched.

CAUTION—TIPPING HAZARD: Indicates a crush hazard.

CAUTION—PINCH HAZARD: Indicates a risk of being caught between moving parts.

CAUTION—ROTATING FAN BLADES: Indicates a risk of laceration from moving fan blades.

Product statements

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY: Do not use this product with extension cords, multioutlet power strips, multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be easily overloaded by a laser printer and may result in a risk of ﬁre, property damage, or poor printer performance.

CAUTION—POTENTIAL INJURY: Only a Lexmark Inline Surge Protector that is properly connected between the printer and the power cord provided with the printer may be used with this product. The use of non-Lexmark surge protection devices may result in a risk of ﬁre, property damage, or poor printer performance.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product near water or wet locations.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm.

Safety information 7

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of ﬁre or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them o as well, and unplug any cables going into the printer.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.

CAUTION—POTENTIAL INJURY: If the printer weight is greater than 18 kg (40 lb), then it requires two or more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY: When moving the printer, follow these guidelines to avoid personal injury or printer damage:

• Make sure that all doors and trays are closed.

• Turn o the printer, and then unplug the power cord from the electrical outlet.

• Disconnect all cords and cables from the printer.

• If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect

them before moving the printer.

• If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over

thresholds and breaks in

ﬂooring.

• If the printer does not have a caster base but is conﬁgured with optional trays or output options, then remove

the output options and lift the printer o the trays. Do not try to lift the printer and any options at the same time.

• Always use the handholds on the printer to lift it.

• Any cart used to move the printer must have a surface able to support the full footprint of the printer.

• Any cart used to move the hardware options must have a surface able to support the dimensions of the

options.

• Keep the printer in an upright position.

• Avoid severe jarring movements.

• Make sure that your ﬁngers are not under the printer when you set it down.

• Make sure that there is adequate clearance around the printer.

CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported conﬁgurations, see

CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.

www.lexmark.com/multifunctionprinters.

Safety information 8

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, use caution in areas marked with this label. Pinch injuries may occur around moving parts, such as gears, doors, trays, and covers.

CAUTION—ROTATING FAN BLADES: To avoid the risk of laceration from moving fan blades, turn o the printer and unplug the power cord from the electrical outlet before accessing areas marked with this symbol.

CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those speciﬁed in the User’s Guide may result in hazardous radiation exposure.

CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced. There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the manufacturer's instructions and local regulations.

This product is designed, tested, and approved to meet strict global safety standards with the use of speciﬁc manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

Refer service or repairs, other than those described in the user documentation, to a service representative.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

This product may produce small amounts of ozone during normal operation, and may be equipped with a ﬁlter designed to limit ozone concentrations to levels well below the recommended exposure limits. To avoid high ozone concentration levels during extensive usage, install this product in a well-ventilated area and replace the ozone and exhaust ﬁlters if instructed to do so in the product maintenance instructions. If there are no references to ﬁlters in the product maintenance instructions, then there are no ﬁlters requiring replacement for this product.

SAVE THESE INSTRUCTIONS.

Learning about the printer 9

Learning about the printer

Finding information about the printer

What are you looking for? Find it here

Initial setup instructions:

• Connecting the printer

See the setup documentation that came with the printer or go to

http://support.lexmark.com.

• Installing the printer software

More setup and instructions for using the printer:

• Selecting and storing paper and specialty media

• Loading paper

• Conﬁguring printer settings

• Viewing and printing documents and photos

• Setting up and using the printer software

• Conﬁguring the printer on a network

• Caring for and maintaining the printer

Information Center—Go to

http://infoserve.lexmark.com.

Help Menu Pages—Access the guides on the printer

http://support.lexmark.com.

Touch Screen Guide—Go to

http://support.lexmark.com.

Product videos—Go to

http://infoserve.lexmark.com/idv/.

ﬁrmware

or go to

• Troubleshooting and solving problems

Information on setting up and conﬁguring the accessibility features of your printer

Help using the printer software Help for Microsoft® Windows® or Macintosh

Lexmark Accessibility Guide—Go to

http://support.lexmark.com.

operating systems—Open a printer software program or application, and then click Help.

Click

Notes:

to view context‑sensitive information.

• Help is automatically installed with the printer

software.

• Depending on the operating system, the

printer software is located in the printer program folder or on the desktop.

Learning about the printer 10

What are you looking for? Find it here

Go to

The latest supplemental information, updates, and customer support:

• Documentation

• Driver downloads

• Live chat support

• E‑mail support

• Voice support

http://support.lexmark.com.

Note: Select your country or region, and then

select your product to view the appropriate support site.

Support contact information for your country or region can be found on the website or on the printed warranty that came with the printer.

Have the following information ready when you contact customer support:

• Place and date of purchase

• Machine type and serial number

• Safety information

• Regulatory information

• Warranty information

• Environmental information

Warranty information varies by country or region:

• In the U.S.—See the Statement of Limited

Warranty included with the printer, or go to

http://support.lexmark.com.

• In other countries and regions—See the

printed warranty that came with the printer.

Product Information Guide—See the documentation that came with the printer or go to

http://support.lexmark.com.

Learning about the printer 11

Selecting a location for the printer

• Leave enough room to open trays, covers, and doors and to install hardware options.

• Set up the printer near an electrical outlet.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product near water or wet locations.

• Make sure that airﬂow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical

Committee 156 standard.

• Provide a ﬂat, sturdy, and stable surface.

• Keep the printer: – Clean, dry, and free of dust – Away from stray staples and paper clips – Away from the direct

airﬂow

– Free from direct sunlight and humidity extremes

• Observe the temperature range.

of air conditioners, heaters, or ventilators

Operating temperature 10 to 32.2°C (50 to 90°F)

• Allow the following recommended amount of space around the printer for proper ventilation:

1 Top 25 4 mm (1 0 in . )

2 Rear 102 mm (4 in.)

3 Right side 76 mm (3 in.)

4 Front 508 mm (20 in.)

Note: The minimum space needed in front of the printer is 75 mm (3 in.)

5 Left side 76 mm (3 in.)

Learning about the printer 12

Printer conﬁgurations

CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a

caster base, furniture, or other feature to prevent instability causing possible injury. For more information on supported conﬁgurations, see

CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.

Depending on your printer model, you can conﬁgure your printer by adding an optional 650‑sheet duo tray, a 550‑sheet tray, or both. For more information, see

www.lexmark.com/multifunctionprinters.

“Installing optional trays” on page 164.

1 Control panel

Note: The appearance may vary depending on your printer model.

2 Standard bin

3 Standard 250‑sheet tray

4 Manual feeder

5 Optional 650‑sheet duo tray

Note: This tray is available only in some printer models.

6 Optional 550‑sheet tray

Note: This tray is available only in some printer models.

Learning about the printer 13

Attaching cables

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, use only the power cord provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the USB cable, any wireless network adapter, or the printer in the areas shown while actively printing.

Use the To

1 Ethernet port Connect the printer to a network.

2 Power cord socket Connect the printer to an electrical outlet.

3 USB port Attach a keyboard or any compatible option.

Note: This port is available only in some printer models.

4 USB printer port Connect the printer to a computer.

Using the control panel 14

Using the control panel

Lexmark C2325

Use the To

1 Display

2 Menu button Access the printer menus.

3 Power button

4 Stop or Cancel button Stop the current printer task.

5 Indicator light Check the printer status.

6 Back button Return to the previous screen.

7 Right arrow button

8 Select button

9 Left arrow button

• View printer messages and supply status.

• Set up and operate the printer.

• Turn on or turn o the printer.

Note: To t urn o the printer, press and hold the power button for

• Set the printer to Sleep or Hibernate mode.

• Wake the printer from Sleep or Hibernate mode.

• Scroll through menus or move between screens and menu options.

• Increase the numeric value of a setting.

• Select a menu option.

• Save the changes in a setting.

• Scroll through menus or move between screens and menu options.

• Decrease the numeric value of a setting.

seconds.

ﬁve

Using the control panel 15

Lexmark CS421, Lexmark CS521, Lexmark C2425, and Lexmark C2535

Use the To

1 Display

2 Select button

3 Arrow buttons

4 Numeric keypad Enter numbers or symbols in an input ﬁeld.

5 Power button

6 Backspace button Move the cursor backward and delete a character in an input ﬁeld.

7 Stop or Cancel button Stop the current printer task.

8 Indicator light Check the printer status.

9 Back button Return to the previous screen.

10 Home button Go to the home screen.

• View printer messages and supply status.

• Set up and operate the printer.

• Select a menu option.

• Save the changes in a setting.

• Scroll through menus or move between screens and menu options.

• Adjust the numeric value of a setting.

• Turn on or turn o the printer.

Note: To t urn o the printer, press and hold the power button for

• Set the printer to Sleep or Hibernate mode.

• Wake the printer from Sleep or Hibernate mode.

seconds.

ﬁve

Using the control panel 16

Lexmark CS622 and Lexmark C2240

Use the To

1 Display

2 Home button Go to the home screen.

3 Numeric keypad Enter numbers or symbols in an input ﬁeld.

4 Power button

5 Stop or Cancel button Stop the current printer task.

6 Indicator light Check the printer status.

7 Back button Return to the previous screen.

• View printer messages and supply status.

• Set up and operate the printer.

• Turn on or turn o the printer.

Note: To turn o the printer, press and hold the power button for ﬁve seconds.

• Set the printer to Sleep or Hibernate mode.

• Wake the printer from Sleep or Hibernate mode.

• Select a menu option.

• Save the changes in a setting.

Understanding the status of the power button and indicator light

Indicator light Printer status

O The printer is o or in Hibernate mode.

Blue The printer is ready or processing data.

Red The printer requires user intervention.

Power button light Printer status

O The printer is o, ready, or processing data.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is in Hibernate mode.

Setting up and using the home screen applications 17

Setting up and using the home screen applications

Note: These applications are supported only in some printer models.

Using the home screen

Note: Your home screen may vary depending on your home screen customization settings, administrative

setup, and active embedded solutions.

To uc h To

1 Status/Supplies

2 Job Queue Show all the current print jobs.

3 Change Language Change the language on the display.

4 Settings Access the printer menus.

5 Eco‑Settings Manage energy consumption, noise, toner, and paper usage settings.

6 Held Jobs Show the print jobs that are held in the printer memory.

7 USB Drive Print photos and documents from a ﬂash drive.

8 Address Book Manage a contact list that other applications on the printer can access.

• Show a warning or error message whenever the printer requires intervention to

continue processing.

• View more information on the printer warning or message, and on how to clear it.

Note: You can also access this setting by touching the top section of the home screen.

Setting up and using the home screen applications 18

Customizing the home screen

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Settings > Device > Visible Home Screen Icons.

3 Select the icons that you want to appear on the home screen.

4 Apply the changes.

Using Display Customization

Before using the application, make sure to do the following:

• From the Embedded Web Server, click Apps > Display Customization >

• Enable and

conﬁgure

the screen saver, slideshow, and wallpaper settings.

Conﬁgure

Managing screen saver and slide show images

1 From the Screen Saver and Slideshow Images section, add, edit, or delete an image.

Notes:

• You can add up to 10 images.

• When enabled, the status icons appear on the screen saver only when there are errors, warnings, or

cloud‑based notiﬁcations.

2 Apply the changes.

Changing the wallpaper image

1 From the home screen, touch Change Wallpaper.

2 Select an image to use.

3 Apply the changes.

Running a slide show from a ﬂash drive

1 Insert a ﬂash drive into the USB port.

2 From the home screen, touch Slideshow.

Images appear in alphabetical order.

Note: You can remove the ﬂash drive after the slide show starts, but the images are not stored in the printer. If the slide show stops, then insert the ﬂash drive again to view the images.

Setting up and using the home screen applications 19

Conﬁguring Eco‑Settings

1 From the home screen, touch Eco‑Settings.

2 Conﬁgure Eco‑Mode or Schedule Power Modes.

3 Apply the changes.

Creating a Cloud Connector proﬁle

We recommend logging in to the printer before you create a proﬁle. To enable a login method, see the

Embedded Web Server

1 From the home screen, touch Cloud Connector.

2 Select a cloud service provider.

3 To u ch Create a Proﬁle or .

‑

Security Admin Guide.

4 Type a unique

5 If necessary, enter a PIN.

Note: When using the printer as guest, protect the

6 To u ch Create, and then take note of the authorization code.

Note: The authorization code is valid only for 24 hours.

7 Open a web browser, and then go to https://lexmark.cloud-connect.co.

8 Click Next, and then accept the Terms of Use.

9 Enter the authorization code, and then click Connect.

10 Log in to your cloud service provider account.

11 Grant permissions.

Note: To complete the authorization process, open the proﬁle within 72 hours.

proﬁle

name.

proﬁle

with a PIN.

Setting up Device Quotas

You may need administrative rights to access the application.

1 Open a Web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Apps > Device Quotas > Conﬁgure.

3 From the User Accounts section, add or edit a user, and then set the user quota.

4 Apply the changes.

Setting up and using the home screen applications 20

Note: For information on how to conﬁgure the application and its security settings, see the Device Quotas Administrator’s Guide.

Using QR Code Generator

You may need administrative rights to access the application.

1 Open a Web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2 Click Apps > QR Code Generator > Conﬁgure.

3 Do either of the following:

• Select a default QR code value.

• Type a QR code value.

4 Apply the changes.

Using Customer Support

1 From the home screen, touch Customer Support.

2 Print or e‑mail the information.

Note: For information on conﬁguring the application settings, see the Customer Support Administrator’s

Guide.

Managing bookmarks

Creating bookmarks

Use bookmarks to print frequently accessed documents that are stored in servers or on the web.

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Bookmark Setup > Add Bookmark, and then type a unique name for the bookmark.

Setting up and using the home screen applications 21

3 Select an Address protocol type, and then do one of the following:

• For HTTP and HTTPS, type the URL that you want to bookmark.

• For HTTPS, make sure to use the host name instead of the IP address. For example, type

myWebsite.com/sample.pdf instead of typing 123.123.123.123/sample.pdf. Make sure that the host name also matches the Common Name (CN) value in the server certiﬁcate. For more information on obtaining the CN value in the server

certiﬁcate,

see the help information for your web browser.

• For FTP, type the FTP address. For example, myServer/myDirectory. Enter the FTP port. Port 21 is

the default port for sending commands.

• For SMB, type the network folder address. For example, myServer/myShare/myFile.pdf. Type the

network domain name.

• If necessary, select the Authentication type for FTP and SMB.

To limit access to the bookmark, enter a PIN.

Note: The application supports the following ﬁle types: PDF, JPEG, TIFF, and HTML-based web pages. Other ﬁle types such as DOCX and XLXS are supported in some printer models.

4 Click Save.

Note: To manage bookmarks, click Bookmark Setup.

Creating folders

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Bookmark Setup > Add Folder, and then type a unique name for the folder.

Note: To limit access to the folder, enter a PIN.

3 Click Save.

Notes:

• You can create folders or bookmarks inside a folder. To create a bookmark, see “Creating bookmarks”

on page 20.

• To manage folders, click Bookmark Setup.

Managing contacts

Adding contacts

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

Setting up and using the home screen applications 22

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Address Book.

3 From the Contacts section, add a contact.

Note: You can assign the contact to one or more groups.

4 If necessary, specify a login method to allow application access.

5 Apply the changes.

Adding groups

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Address Book.

3 From the Contact Groups section, add a group name.

Note: You can assign one or more contacts to the group.

4 Apply the changes.

Editing contacts or groups

1 Open a web browser, and then type the printer IP address in the address

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Address Book.

3 Do either of the following:

• From the Contacts section, click a contact name, and then edit the information.

• From the Contact Groups section, click a group name, and then edit the information.

4 Apply the changes.

ﬁeld.

Deleting contacts or groups

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

Setting up and using the home screen applications 23

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Address Book.

3 Do either of the following:

• From the Contacts section, select a contact that you want to delete.

• From the Contact Groups section, select a group name that you want to delete.

Setting up and using the accessibility features 24

Setting up and using the accessibility features

Notes:

• These features are supported only in some printer models.

• For more information on the accessibility features of your printer model, see the Accessibility Guide at

http://support.lexmark.com.

Activating Voice Guidance

From the control panel

1 Press and hold the 5 key until you hear a voice message.

2 Select OK.

From the keyboard

1 Press and hold the 5 key until you hear a voice message.

2 Press Tab to navigate the focus cursor to the OK button, and then press Enter.

Notes:

• Voice Guidance is also activated when you insert headphones into the headphone jack.

• To adjust the volume, use the volume buttons at the bottom part of the control panel.

Navigating the screen using gestures

Notes:

• The gestures are applicable only when Voice Guidance is activated.

• Enable

• Use a physical keyboard to type characters and adjust certain settings.

Gesture Function

Double‑tap Select an option or item on the screen.

Triple‑tap Zoom in or zoom out text and images.

Swipe right or swipe down Move to the next item on the screen.

Magniﬁcation

to use the zoom and pan gestures.

Swipe left or swipe up Move to the previous item on the screen.

Pan Access parts of the zoomed image that are beyond the limits of the screen.

Note: This gesture requires the use of two image.

Swipe up then left Exit an application and return to the home screen.

ﬁngers

to drag across a zoomed

Setting up and using the accessibility features 25

Gesture Function

Swipe down then left

Swipe up then down Repeat a spoken prompt.

• Cancel a job.

• Go back to the previous setting.

• Exit the screen that appears without changing any setting or value.

Enabling Magniﬁcation mode

1 From the control panel, press and hold the 5 key until you hear a voice message.

2 Select

3 Select OK.

For more information on navigating a

24.

Magniﬁcation

mode.

magniﬁed

screen, see

“Navigating the screen using gestures” on page

Adjusting the Voice Guidance speech rate

1 From the home screen, select Settings > Device > Accessibility > Speech Rate.

2 Select the speech rate.

Using the keyboard on the display

Do one or more of the following:

• Drag a ﬁnger over the key to announce the character.

• Lift the

• Select Backspace to delete characters.

• To hear the content in the input

to enter or type the character in the

ﬁnger

ﬁeld,

ﬁeld.

select Tab , and then select Shift + Tab.

Enabling spoken passwords or personal identiﬁcation numbers

1 From the home screen, select Settings > Device > Accessibility > Speak Passwords/PINs.

2 Enable the setting.

Loading paper and specialty media 26

Loading paper and specialty media

Setting the paper size and type

1 From the control panel, navigate to:

Settings > Paper > Tray

Conﬁguration

> Paper Size/Type > select a paper source

For non-touch-screen printer models, press

2 Set the paper size and type.

to navigate through the settings.

Conﬁguring Universal paper settings

1 From the control panel, navigate to:

Settings > Paper > Media Conﬁguration > Universal Setup

For non-touch-screen printer models, press

2 Conﬁgure the settings.

to navigate through the settings.

Loading trays

CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.

Keep all other trays closed until needed.

1 Remove the tray.

Note: To avoid paper jams, do not remove trays while the printer is busy.

2 Adjust the guides to match the size of the paper that you are loading.

Note: Use the indicators on the bottom of the tray to position the guides.

Loading paper and specialty media 27

3 Flex, fan, and align the paper edges before loading.

4 Load the paper stack with the printable side faceup, and then make sure that the side guides ﬁt snugly

against the paper.

Notes:

• Load letterhead faceup with the header toward the front of the tray for one‑sided printing.

• Load letterhead facedown with the header toward the back of the tray for two‑sided printing.

• Do not slide paper into the tray.

• To avoid paper jams, make sure that the stack height is below the maximum paper ﬁll indicator.

Loading paper and specialty media 28

5 Insert the tray.

If necessary, set the paper size and paper type from the control panel to match the paper loaded.

Loading the multipurpose feeder

1 Open the multipurpose feeder.

Note: The multipurpose feeder is available only in some printer models.

2 Adjust the guide to match the size of the paper that you are loading.

Loading paper and specialty media 29

3 Flex, fan, and align the paper edges before loading.

4 Load paper with the printable side facedown.

• Load letterhead with the printable side facedown and the top edge entering the printer ﬁrst for one‑sided

printing.

• Load letterhead with the printable side faceup and the top edge entering the printer last for two‑sided

printing.

• Load envelopes with the

side up and against the right side of the paper guide.

ﬂap

Warning—Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives.

5 From the control panel, set the paper size and paper type to match the paper loaded.

Loading paper and specialty media 30

Loading the manual feeder

1 Adjust the guide to match the size of the paper that you are loading.

2 Load a sheet of paper with the printable side facedown.

• Load letterhead with the printable side facedown and the top edge entering the printer ﬁrst for one‑sided

printing.

• Load letterhead with the printable side faceup and the top edge entering the printer last for two‑sided

printing.

• Load envelope with the ﬂap side up and against the right side of the paper guide.

3 Feed the paper until its leading edge gets pulled in.

Warning—Potential Damage: To avoid paper jams, do not force paper into the manual feeder.

Linking trays

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Loading paper and specialty media 31

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Settings > Paper > Tray

Conﬁguration

3 Set the same paper size and paper type for the trays that you are linking.

4 Save the settings.

5 Click Settings > Device > Maintenance >

Conﬁguration

Menu > Tray

Conﬁguration

6 Set Tray Linking to Automatic.

7 Save the settings.

To unlink trays, make sure that no trays have the same paper size and paper type settings.

Warning—Potential Damage: The temperature of the fuser varies according to the speciﬁed paper type. To avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.

Paper support 32

Paper support

Supported paper sizes

Note: Your printer model may have a 650‑sheet duo tray, which consists of a 550‑sheet tray and an

integrated 100‑sheet multipurpose feeder. The 550‑sheet tray of the 650‑sheet duo tray supports the same paper sizes as the optional 550‑sheet tray. The integrated multipurpose feeder supports dierent paper sizes, types, and weights.

Paper size and dimension

210 x 297 mm (8.27 x 11.7 in.)

1,2

148 x 210 mm (5.83 x 8.27 in.)

105 x 148 mm (4.13 x 5.83 in.)

JIS B5

182 x 257 mm (7.17 x 10.1 i n . )

Letter

215.9 x 279.4 mm (8.5 x 11 in.)

Legal

215.9 x 355.6 mm (8.5 x 14 in.)

Standard

250‑sheet tray

Manual

feeder

Optional 650‑sheet duo tray Optional

550‑sheet tray

X XX

Multipurpose

feeder

550‑sheet

tray

Two‑sided

printing

Executive

184.2 x 266.7 mm (7.25 x 10.5 in.)

Oﬁcio (Mexico)

215.9 x 340.4 mm (8.5 x 13.4 in.)

Load this paper size into tray 1 and the manual feeder with the long edge entering the printer ﬁrst.

Load this paper size into tray 2, tray 3, and the multipurpose feeder with the short edge entering the printer ﬁrst.

When Universal is selected, the page is formatted for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is speciﬁed

by the software application.

Load narrow paper with the short edge entering the printer

When Other Envelope is selected, the page is formatted for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is

speciﬁed by the software application.

ﬁrst.

Paper support 33

Paper size and dimension

Folio

215.9 x 330.2 mm (8.5 x 13 in.)

Statement

139.7 x 215.9 mm (5.5 x 8.5 in.)

Hagaki

100 x 148 mm (3.94 x 5.83 in.)

Universal

3,4

98.4 x 148 mm to

215.9 x 355.6 mm (3.87 x 5.83 in. to

8.5 x 14 in.)

Universal

3,4

76.2 x 127 mm to

215.9 x 355.6 mm (3 x 5 in. to 8.5 x 14 in.)

Universal

3,4

148 x 210 mm to

215.9 x 355.6 mm (5.83 x 8.27 in. to

8.5 x 14 in.)

Universal

3,4

210 x 250 mm to

215.9 x 355.6 mm (8.27 x 9.84 in. to

8.5 x 14 in.)

Standard

250‑sheet tray

Manual

feeder

Optional 650‑sheet duo tray Optional

550‑sheet tray

Multipurpose

feeder

550‑sheet

tray

Two‑sided

printing

X XX

7 3/4 Envelope

X XX

98.4 x 190.5 mm (3.875 x 7.5 in.)

9 Envelope

X XX

98.4 x 225.4 mm (3.875 x 8.9 in.)

Load this paper size into tray 1 and the manual feeder with the long edge entering the printer ﬁrst.

Load this paper size into tray 2, tray 3, and the multipurpose feeder with the short edge entering the printer ﬁrst.

When Universal is selected, the page is formatted for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is

speciﬁed

by the software application.

Load narrow paper with the short edge entering the printer

When Other Envelope is selected, the page is formatted for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is

ﬁrst.

speciﬁed by the software application.

Paper support 34

Paper size and dimension

10 Envelope

Standard

250‑sheet tray

Manual

feeder

Optional 650‑sheet duo tray Optional

550‑sheet tray

Multipurpose

feeder

550‑sheet

tray

Two‑sided

printing

X XX

104.8 x 241.3 mm (4.12 x 9.5 in.)

DL Envelope

X XX

110 x 220 mm (4.33 x 8.66 in.)

C5 Envelope

X XX

162 x 229 mm (6.38 x 9.01 in.)

B5 Envelope

X XX

176 x 250 mm (6.93 x 9.84 in.)

Monarch

X XX

98.425 x 190.5 mm (3.875 x 7.5 in.)

Other Envelope

X XX

98.4 x 162 mm to 176 x 250 mm (3.87 x 6.38 in. to

6.93 x 9.84 in.)

Load this paper size into tray 1 and the manual feeder with the long edge entering the printer ﬁrst.

Load this paper size into tray 2, tray 3, and the multipurpose feeder with the short edge entering the printer ﬁrst.

When Universal is selected, the page is formatted for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is

speciﬁed

by the software application.

Load narrow paper with the short edge entering the printer

When Other Envelope is selected, the page is formatted for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is

ﬁrst.

speciﬁed by the software application.

Supported paper types

Notes:

• Your printer model may have a 650‑sheet duo tray, which consists of a 550‑sheet tray and an integrated

100‑sheet multipurpose feeder. The 550‑sheet tray of the 650‑sheet duo tray supports the same paper types as the 550‑sheet tray. The integrated multipurpose feeder supports dierent paper sizes, types, and weights.

• Labels, envelopes, and card stock always print at 25 pages per minute.

Paper support 35

Paper type Standard

250‑sheet

tray

Manual

feeder

Optional 650‑sheet duo tray Optional

550‑sheet tray

Multipurpose

feeder

550‑sheet

tray

Two‑sided

printing

Plain paper

Card stock X

Envelopes

X XX

Paper labels

Vinyl labels X

Supported paper weights

Notes:

• Your printer model may have a 650‑sheet duo tray, which consists of a 550‑sheet tray and an integrated

• Labels, envelopes, and card stock always print at 25 pages per minute.

Paper type and weight

Light paper

60–74.9 g/m

Standard

250‑sheet

tray

Manual

feeder

Optional 650‑sheet duo tray Optional

550‑sheet tray

Multipurpose

feeder

550‑sheet

Two‑sided

printing

tray

grain long (16–

19.9‑lb bond)

Plain paper

75–90.3 g/m

grain long (20– 24‑lb bond)

Heavy paper

90.3–105 g/m

grain long (24.1– 28‑lb bond)

Paper less than 75 g/m2 (20 lb) must be printed with Paper Type set to Light Paper. Failure to do so may cause

excessive curl which can lead to feeding errors, especially in more humid environments.

Labels and other specialty media are supported for occasional use and must be tested for acceptability.

Paper labels up to 105 g/m2 (28‑lb bond) are supported.

100% cotton content maximum weight is 24‑lb bond.

28‑lb bond envelopes are limited to 25% cotton content.

Paper support 36

Paper type and weight

Card stock

105.1–162 g/m

Standard

250‑sheet

tray

Manual

feeder

Optional 650‑sheet duo tray Optional

550‑sheet tray

Multipurpose

feeder

550‑sheet

Two‑sided

printing

tray

grain long (28.1– 43‑lb bond)

Card stock

105.1–200 g/m

XX XX

grain long (28.1– 53‑lb bond)

Paper Labels

131 g/m2 (35‑lb bond)

Vinyl Labels

131 g/m2 (35‑lb bond)

Envelopes

4,5

X XX

60–105 g/m2 (16– 28‑lb bond)

Paper less than 75 g/m2 (20 lb) must be printed with Paper Type set to Light Paper. Failure to do so may cause

excessive curl which can lead to feeding errors, especially in more humid environments.

Labels and other specialty media are supported for occasional use and must be tested for acceptability.

Paper labels up to 105 g/m2 (28‑lb bond) are supported.

100% cotton content maximum weight is 24‑lb bond.

28‑lb bond envelopes are limited to 25% cotton content.

Printing 37

Printing

Printing from a computer

Note: For labels, card stock, and envelopes, set the paper size and type in the printer before printing the

document.

1 From the document that you are trying to print, open the Print dialog.

2 If necessary, adjust the settings.

3 Print the document.

Printing from a mobile device

Printing from a mobile device using Lexmark Mobile Print

LexmarkTM Mobile Print allows you to send documents and images directly to a supported Lexmark printer.

1 Open the document, and then send or share the document to Lexmark Mobile Print.

Note: Some third‑party applications may not support the send or share feature. For more information, see

the documentation that came with the application.

2 Select a printer.

3 Print the document.

Printing from a mobile device using Google Cloud Print

Google Cloud PrintTM is a mobile printing service that allows enabled applications on mobile devices to print to any Google Cloud Print‑ready printer.

1 From the home screen of your mobile device, launch an enabled application.

2 Tap Print, and then select a printer.

3 Print the document.

Printing from a mobile device using Mopria Print Service

Mopria® Print Service is a mobile printing solution for mobile devices running on Android version 4.4 or later. It allows you to print directly to any Mopria‑certiﬁed printer.

Note: Before printing, make sure that the Mopria Print Service is enabled.

1 From the home screen of your mobile device, launch a compatible application.

2 Tap Print, and then select a printer.

3 Print the document.

Printing 38

Printing from a mobile device using AirPrint

AirPrint is a mobile printing solution that allows you to print directly from Apple devices to an AirPrint‑certiﬁed printer.

Notes:

• This application is supported only in some Apple devices.

• This application is supported only in some printer models.

1 From the home screen of your mobile device, launch a compatible application.

2 Select an item to print, and then tap the share icon.

3 Tap Print, and then select a printer.

4 Print the document.

Printing from a ﬂash drive

This feature is available only in some printer models.

1 Insert the ﬂash drive.

Notes:

• If you insert the

drive when an error message appears, then the printer ignores the

ﬂash

• If you insert the ﬂash drive while the printer is processing other print jobs, then Busy appears on the

display.

drive.

2 Select the document that you want to print.

If necessary, conﬁgure other print settings.

3 Print the document.

To print another document, select USB Drive.

Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the ﬂash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Printing 39

Supported ﬂash drives and ﬁle types

Flash drives

• Lexar JumpDrive S70 (16GB and 32GB)

• SanDisk Cruzer (16GB and 32GB)

• PNY Attache (16GB and 32GB)

Notes:

– The printer supports high‑speed USB ﬂash drives with full‑speed standard. – USB ﬂash drives must support the File Allocation Table (FAT) system.

File types

Documents

• PDF (version 1.7 or earlier)

• HTML

• XPS

• Microsoft ﬁle formats (.doc, .docx, .xls, .xlsx, .ppt, .pptx)

Images

• .dcx

• .gif

• .JPEG or .jpg

• .bmp

• .pcx

• .TIF F or .ti f

• .png

Printing 40

Conﬁguring conﬁdential jobs

1 From the control panel, navigate to:

Settings > Security >

Conﬁdential

Print Setup

For non‑touch‑screen printer models, press In some printer models, access the setting from the Embedded Web Server.

to navigate through the settings.

2 Conﬁgure the settings.

Use To

Max Invalid PIN Set the number of times an invalid PIN can be entered.

Note: When the limit is reached, the print jobs for that user name are deleted.

Conﬁdential Job Expiration

Repeat Job Expiration Set the expiration time for a repeat print job.

Verify Job Expiration Set the expiration time that the printer prints a copy before printing the remaining

Reserve Job Expiration Set the expiration time that the printer stores print jobs.

Require All Jobs to be Held

Set the expiration time for conﬁdential print jobs.

Note:

Conﬁdential

deleted manually.

Note: Repeat held jobs are stored in the printer memory for reprinting.

copies. Note: Verify jobs print one copy to check if it is satisfactory before printing the

remaining copies.

Note: Reserve held jobs are automatically deleted after printing.

Set the printer to hold all print jobs.

held jobs are stored in the printer until they are released or

Printing conﬁdential and other held jobs

For Windows users

1 With a document open, click File > Print.

2 Click Properties, Preferences, Options, or Setup.

3 Click Print and Hold.

4 Select Use Print and Hold, and then assign a user name.

5 Select the print job type (Conﬁdential, Repeat, Reserve, or Verify).

If the print job is conﬁdential, then enter a four‑digit PIN.

6 Click OK or Print.

Printing 41

7 From the printer home screen, release the print job.

• For conﬁdential print jobs, navigate to:

Held jobs > select your user name > Conﬁdential > enter the PIN > select the print job > conﬁgure the settings > Print

• For other print jobs, navigate to:

Held jobs > select your user name > select the print job > conﬁgure the settings > Print

For Macintosh users

1 With a document open, choose File > Print.

If necessary, click the disclosure triangle to see more options.

2 From the print options or Copies & Pages menu, choose Job Routing.

3 Select the print job type (Conﬁdential, Repeat, Reserve, or Verify).

If the print job is conﬁdential, then assign a user name and a four‑digit PIN.

4 Click OK or Print.

5 From the printer home screen, release the print job.

• For conﬁdential print jobs, navigate to:

Held jobs > select your user name > settings > Print

Conﬁdential

• For other print jobs, navigate to:

Held jobs > select your user name > select the print job >

> enter the PIN > select the print job >

conﬁgure

the settings > Print

conﬁgure

the

Printing from a Cloud Connector proﬁle

1 From the home screen, touch Cloud Connector.

2 Select a cloud service provider, and then select a

Note: For more information on creating a Cloud Connector

proﬁle”

on page 19.

proﬁle.

proﬁle,

see

3 Select a ﬁle.

Note: You cannot select an unsupported ﬁle.

4 If necessary, change the settings.

5 To u ch Print.

Printing a font sample list

1 From the control panel, navigate to:

Settings > Reports > Print > Print Fonts

For non-touch-screen printer models, press

2 Select a font sample.

to navigate through the settings.

“Creating a Cloud Connector

Printing 42

Printing a directory list

From the control panel, navigate to:

Settings > Reports > Print > Print Directory

For non-touch-screen printer models, press

to navigate through the settings.

Understanding the printer menus 43

Understanding the printer menus

Menu map

Device

Paper

USB Drive

Network/Ports

Security

• Preferences

• Remote Operator Panel

• Notiﬁcations

• Power Management

• Information Sent to Lexmark

• Layout

• Setup

• Quality

• Job Accounting

• XPS

• Accessibility

• Restore Factory Defaults

• Maintenance

• Visible Home Screen Icons

• About This Printer

• PDF

• PostScript

• PCL

• HTML

• Image

• Tray Conﬁguration • Media Conﬁguration

Flash Drive Print

• Network Overview

• Wireless

• Ethernet

• TCP/IP

• SNMP

• IPSec

• LPD Conﬁguration

• HTTP/FTP Settings

• ThinPrint

• USB

• Google Cloud Print

• Wi‑Fi Direct

• 802.1x

• Login Methods

• Schedule USB Devices

• Security Audit Log

• Login Restrictions

• Conﬁdential Print Setup

• Disk Encryption

• Erase Temporary Data Files

• Solutions LDAP Settings

• Mobile Services Management

• Miscellaneous

Reports

Help

Troubleshooting Print Quality Test Pages

In some printer models, this menu can be conﬁgured only from the Embedded Web Server.

This menu is available only in some printer models.

• Menu Settings Page

• Device

• Print All Guides

• Color Quality Guide

• Connection Guide

• Copy Guide

• E‑mail Guide

• Fax Guide

• Print

• Network

• Information Guide

• Media Guide

• Moving Guide

• Print Quality Guide

• Scan Guide

• Supplies Guide

Understanding the printer menus 44

Device

Preferences

Menu item Description

Display Language

[List of languages]

Country/Region

[List of countries or regions]

Run initial setup

O* On

Keyboard

Keyboard Type

[List of languages]

Displayed information

Display Text 1 [IP Address*] Display Text 2 [Date/Time*] Custom Text 1 Custom Text 2

Date and Time

Conﬁgure

Current Date and Time Manually Set Date and Time Date Format [MM‑DD‑YYYY*] Time Format [12 hour A.M./P.M.*] Time Zone [GMT*]

Set the language of the text that appears on the display.

Identify the country or region where the printer is conﬁgured to operate.

Run the setup wizard.

Select a language as a keyboard type.

Notes:

• All the Keyboard Type values may not appear or may

require special hardware to appear.

• This menu item appears only in some printer models.

Specify the information to appear on the home screen. Note: Custom Text 1 and Custom Text 2 appear only in some

printer models.

Conﬁgure the printer date and time.

Date and Time

Network Time Protocol

Enable NTP [On*] NTP Server Enable Authentication

Conﬁgure the settings for Network Time Protocol (NTP).

Notes:

• Enable Authentication appears only in some printer

models.

• When Enable Authentication is set to MD5 key, Key ID

and Password appear.

Paper Sizes

U.S.* Metric

Screen Brightness

20–100% (100*)

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify the unit of measurement for paper sizes. Note: The country or region selected in the initial setup

wizard determines the initial paper size setting.

Adjust the brightness of the display. Note: This menu item appears only in some printer models.

Understanding the printer menus 45

Menu item Description

Flash Drive Access

Enabled* Disabled

Screen Timeout

5–300 (60*)

Note: An asterisk (*) next to a value indicates the factory default setting.

Enable access to the ﬂash drive. Note: This menu item appears only in some printer models.

Set the idle time in seconds before the display shows the home screen, or before the printer logs o a user account automatically.

Remote Operator Panel

Menu item Description

External VNC Connection

Don’t Allow* Allow

Authentication Type

None* Standard Authentication

Note: An asterisk (*) next to a value indicates the factory default setting.

Connect an external Virtual Network Computing (VNC) client to the remote control panel.

Set the authentication type when accessing the VNC client server.

Note: When set to Standard Authentication, VNC Password appears.

Notiﬁcations

Menu item Description

Error Lighting

O On*

Alarm Control

O Single* Continuous

Supplies

Show Supply Estimates

Show estimates* Do not show estimates

Supplies

Cartridge Alarm

O Single* Continuous

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the indicator light to come on when a printer error occurs. Note: This menu item appears only in some printer models.

Set the number of times that the alarm sounds when the printer requires user intervention.

Note: This menu item appears only in some printer models.

Show the estimated status of the supplies.

Set the number of times that the alarm sounds when the toner cartridge is low.

Note: This menu item appears only in some printer models.

Understanding the printer menus 46

Menu item Description

E‑mail Alerts Setup

E‑mail Setup

Primary SMTP Gateway

E‑mail Alerts Setup

E‑mail Setup

Primary SMTP Gateway Port

1–65535 (25*)

E‑mail Alerts Setup

E‑mail Setup

Secondary SMTP Gateway

E‑mail Alerts Setup

E‑mail Setup

Secondary SMTP Gateway Port

1–65535 (25*)

E‑mail Alerts Setup

E‑mail Setup

SMTP Timeout

5‑30 seconds (30*)

E‑mail Alerts Setup

E‑mail Setup

Reply Address

Type the IP address or host name of the primary SMTP server for sending e-mail.

Note: This menu item appears only in some printer models.

Enter the port number of the primary SMTP server. Note: This menu item appears only in some printer models.

Type the server IP address or host name of your secondary or backup SMTP server.

Note: This menu item appears only in some printer models.

Enter the server port number of your secondary or backup SMTP server.

Note: This menu item appears only in some printer models.

Specify how long before the printer times out if the SMTP server does not respond.

Note: This menu item appears only in some printer models.

Specify a reply address in the e‑mail.

Note: This menu item appears only in some printer models.

E‑mail Alerts Setup

E‑mail Setup

Always use SMTP default Reply Address

O* On

E‑mail Alerts Setup

E‑

mail Setup

Use SSL/TLS

Disabled* Negotiate Required

E‑mail Alerts Setup

E‑mail Setup

Require Trusted Certiﬁcate

On* O

Note: An asterisk (*) next to a value indicates the factory default setting.

Use the SMTP default Reply Address. Note: This menu item appears only in some printer models.

Send an e‑mail using an encrypted link. Note: This menu item appears only in some printer models.

Require a trusted certiﬁcate when accessing the SMTP server. Note: This menu item appears only in some printer models.

Understanding the printer menus 47

Menu item Description

E‑mail Alerts Setup

E‑mail Setup

SMTP Server Authentication

No authentication required* Login / Plain NTLM CRAM‑MD5 Digest‑MD5 Kerberos 5

E‑mail Alerts Setup

E‑mail Setup

Device‑Initiated E‑mail

None* Use Device SMTP Credentials

E‑mail Alerts Setup

E‑mail Setup

User‑Initiated E‑mail

None Use Device SMTP Credentials Use Session User ID and Password Use Session E‑mail address and

Password* Prompt user

Set the authentication type for the SMTP server. Note: This menu item appears only in some printer models.

Set whether credentials are required for device‑initiated e‑mails.

Note: This menu item appears only in some printer models.

Set whether credentials are required for user‑initiated e‑mails.

Note: This menu item appears only in some printer models.

E‑mail Alerts Setup

E‑mail Setup

Use Active Directory Device Credentials

O On*

E‑mail Alerts Setup

E‑mail Setup

Device Userid

E‑mail Alerts Setup

E‑mail Setup

Device Password

E‑mail Alerts Setup

E‑mail Setup

Kerberos 5 REALM

E‑mail Alerts Setup

E‑mail Setup

NTLM Domain

Note: An asterisk (*) next to a value indicates the factory default setting.

Enable user credentials and group designations to connect to the SMTP server.

Note: This menu item appears only in some printer models.

Specify the user ID to connect to the SMTP server. Note: This menu item appears only in some printer models.

Specify the password to connect to the SMTP server. Note: This menu item appears only in some printer models.

Specify the realm for the Kerberos 5 authentication protocol. Note: This menu item appears only in some printer models.

Specify the domain name for the NTLM security protocol. Note: This menu item appears only in some printer models.

Understanding the printer menus 48

Menu item Description

E‑mail Alerts Setup

E‑mail Setup

Disable “SMTP server not set up” error

O* No

Error Prevention

Jam Assist

O On*

Error Prevention

Auto Continue

O On* (5 seconds)

Error Prevention

Auto Reboot

Reboot when idle Reboot always* Reboot never

Error Prevention

Auto Reboot

Max Auto Reboots

1–20 (2*)

Disable an SMTP setup error message to appear on the display.

Note: This menu item appears only in some printer models.

Set the printer to ﬂush blank pages or pages with partial prints automatically after a jammed page has been cleared.

Let the printer continue processing or printing a job automatically after clearing certain printer conditions that require user intervention.

Set the printer to restart when an error occurs.

Set the number of automatic reboots that the printer can perform.

Error Prevention

Auto Reboot

Auto Reboot Window

1–525600 (720*)

Error Prevention

Auto Reboot

Auto Reboot Counter

Error Prevention

Auto Reboot

Reset Auto Reboot Counter

Cancel Continue

Error Prevention

Display Short Paper Error

On Auto‑clear*

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the number of seconds before the printer performs an automatic reboot.

Show a read‑only information of the reboot counter. Note: In some printer models, you can reset the counter.

Reset Auto Reboot Counter. Note: This menu item appears only in some printer models.

Set the printer to show a message when a short paper error occurs.

Note: Short paper refers to the size of the paper loaded.

Understanding the printer menus 49

Menu item Description

Error Prevention

Page Protect

O* On

Jam Content Recovery

Jam Recovery

O On Auto*

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the printer to process the entire page into the memory before printing it.

Set the printer to reprint jammed pages.

Power Management

Menu item Description

Sleep Mode Proﬁle

Print With Display

Display on when printing Allow printing with display o*

Timeouts

Sleep Mode

1–120 minutes (15*)

O

Allow printing with the display turned o.

Set the idle time before the printer begins operating in Sleep mode.

Timeouts

Hibernate Timeout

Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days* 1 week 2 weeks 1 month

Timeouts

Hibernate Timeout on Connection

Hibernate Do Not Hibernate*

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the time before the printer enters Hibernate mode.

Set the printer to Hibernate mode even when an active Ethernet connection exists.

Understanding the printer menus 50

Menu item Description

Eco-Mode

O* Energy Energy/Paper Paper

Schedule Power Modes

Schedules

Note: An asterisk (*) next to a value indicates the factory default setting.

Minimize the use of energy, paper, or specialty media. Note: Setting Eco‑Mode to Energy or Paper may

printer performance, but not print quality.

Schedule the printer when to enter Sleep or Hibernate mode.

Note: This menu item appears only in some printer models.

Information Sent to Lexmark

Menu item Description

Information Sent to Lexmark

Supplies and Page Usage (Anonymous)

Device Performance (Anonymous)

Device Interaction (Anonymous)

None of the Above

Send printer usage and performance information to Lexmark.

Notes:

• Device Performance (Anonymous), Device Interaction (Anonymous), and

None of the Above appear only in some printer models.

• Information Send Time and User Information ‑ Level appear only when

you select any of the settings in Information Sent to Lexmark, except None of the Above.

aect

Information Send Time

Start Time Stop Time

User Information ‑ Level

Anonymous Session Information Only*

Session Information with Generic User Information

Session Information with Actual User IDs

Accessibility

Note: This menu appears only in some printer models.

Menu item Description

Duplicate Key Strike Interval

0–5 (0*)

Key Repeat Initial Delay

0.25–5 (1*)

Set the interval in seconds during which the printer ignores duplicate key presses on an attached keyboard.

Set the initial length of delay in seconds before a repeating key starts repeating.

Note: This menu item appears only when a keyboard is attached to the printer.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 51

Menu item Description

Key Repeat Rate

0.5–30 (30*)

Prolong Screen Timeout

O* On

Headphone Volume

1–10 (5*)

Enable Voice Guidance When Headphone Is Attached

O* On

Speak Passwords/PINs

O* On

Speech Rate

Very Slow Slow Normal* Fast Faster Very Fast Rapid Very Rapid Fastest

Set the number of presses per second for a repeating key. Note: This menu item appears only when a keyboard is attached to the

printer.

Let the user remain in the same location and reset the Screen Timeout timer when it expires instead of returning to the home screen.

Adjust the headphone volume. Note: This menu item appears only when a headphone is attached to the

printer.

Enable Voice Guidance when a headphone is attached to the printer.

Set the printer to read out loud passwords or personal identiﬁcation numbers.

Note: This menu item appears only when a headphone or a speaker is attached to the printer.

Set the Voice Guidance speech rate. Note: This menu item appears only when a headphone or a speaker is

attached to the printer.

Note: An asterisk (*) next to a value indicates the factory default setting.

Restore Factory Defaults

Menu item Description

Restore Settings

Restore all settings Restore printer settings Restore network settings Restore app settings

Restore the printer factory default settings. Note: Restore app settings appears only in some printer models.

Understanding the printer menus 52

Maintenance

Conﬁguration Menu

Menu item Description

USB Conﬁguration

USB PnP

1* 2

USB Conﬁguration

USB Speed

Full Auto*

Tra y Conﬁg uratio n

Tray Li n k ing

Automatic* O

Tra y Conﬁg uratio n

Show Tray Insert Message

O Only for unknown sizes* Always

Tra y Conﬁg uratio n

Paper Prompts

Auto* Multipurpose Feeder Manual Paper

Change the USB driver mode of the printer to improve its compatibility with a personal computer.

Note: This menu item appears only in some printer models.

Set the USB port to run at full speed and disable its high‑speed capabilities.

Note: This menu item appears only in some printer models.

Set the printer to link the trays that have the same paper type and paper size settings.

Show the Tray Insert message.

Set the paper source that the user ﬁlls when a prompt to load paper appears.

Note: The multipurpose feeder is available only in some printer models.

Tra y Conﬁg uratio n

Envelope Prompts

Auto* Multipurpose Feeder Manual Envelope

Tra y Conﬁg uratio n

Action for Prompts

Prompt user* Continue Use current

Reports

Menu Settings Page Event Log Event Log Summary HealthCheck Statistics

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the paper source that the user ﬁlls when a prompt to load envelope appears.

Note: The multipurpose feeder is available only in some printer models.

Set the printer to resolve paper- or envelope-related change prompts.

Print reports about printer menu settings, status, and event logs.

Understanding the printer menus 53

Menu item Description

Supply Usage And Counters

Clear Supply Usage History

Supply Usage And Counters

Reset Color Imaging Kit Counter

Supply Usage And Counters

Reset Maintenance Counter

Supply Usage And Counters

Tiered Coverage Ranges

Printer Emulations

PPDS Emulation

O* On

Print Conﬁguration

Black Only Mode

O* On

Print Conﬁguration

Color Trapping

O 1 2* 3 4 5

Reset the supply usage history, such as number of pages and days remaining, to the factory shipped level.

Reset the counter after installing a new color imaging kit. Note: This menu item appears only in some printer models.

Reset the counter after installing a new maintenance kit.

Adjust the range for the amount of color coverage on the printed page.

Set the printer to recognize and use the PPDS data stream.

Print color content in grayscale.

Enhance the printed output to compensate for misregistration in the printer.

Print Conﬁguration

Font Sharpening

0–150 (24*)

Device Operations

Quiet Mode

O* On

Device Operations

Panel Menus

O On*

Device Operations

Custom Supply Levels

O* On

Note: An asterisk (*) next to a value indicates the factory default setting.

Set a text point-size value below which the high‑frequency screens are used when printing font data.

For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens.

Set the printer to operate in Quiet Mode. Note: Enabling this setting slows down the printer

performance.

Enable access to the control panel menus.

Let printservice read and edit values from the Embedded Web Server.

Understanding the printer menus 54

Menu item Description

Device Operations

Safe Mode

O* On

Device Operations

Clear Custom Status

Device Operations

Clear all remotely‑installed messages

Device Operations

Automatically Display Error Screens

O On*

Device Operations

Enable Optional Parallel Port

O* On

Toner patch sensor setup

Calibration frequency preference

Disabled Fewest color adjustment Fewer color adjustment Normal* Better color accuracy Best color accuracy

Set the printer to operate in a special mode, in which it attempts to continue oering as much functionality as possible, despite known issues.

For example, when set to On and the duplex motor is nonfunctional, the printer performs one‑sided printing for a two‑sided print job.

Erase user‑deﬁned strings for the Default or Alternate custom messages.

Erase messages that were remotely installed.

Show existing error messages on the display after the printer remains inactive on the home screen for a length of time equal to the Screen Timeout setting.

Enable an optional parallel port. Note: When set to On, the printer restarts.

Set the printer to put down the correct amount of toner to maintain color consistency.

Toner patch sensor setup

Full calibration

Toner patch sensor setup

Print TPS information page

App Conﬁguration

LES Applications

O On*

Run the full color calibration.

Print a diagnostic page that contains information on toner patch sensor calibration.

Enable the Lexmark Embedded Solutions (LES) applications.

Notes:

• This menu item is available only in some printer models.

• When set to On, this setting does not

applications.

Note: An asterisk (*) next to a value indicates the factory default setting.

aect

built‑in

Understanding the printer menus 55

Out of Service Erase

Menu item Description

Out of Service Erase

Memory Last Sanitized Hard Disk Last Sanitized

Show information on when the printer memory or hard disk was last sanitized.

Note: Hard Disk Last Sanitized appears only in printers with a hard disk installed.

Out of Service Erase

Sanitize all information on nonvolatile memory

Sanitize all information on hard disk

Clear all settings and applications that are stored in the printer memory or hard disk.

Note: Sanitize all information on hard disk appears only in printers with a hard disk installed.

Erase all printer and network settings

Visible Home Screen Icons

Note: This menu appears only in some printer models.

Menu Description

Status/Supplies Job Queue Change Language Address Book Bookmarks Held Jobs USB App Proﬁles Display Customization Eco‑Settings

Specify which icons to show on the home screen.

About this Printer

Menu item Description

Asset Tag

Printer’s Location

Contact

Export Conﬁguration File to USB

Export Compressed Logs to USB

Send Logs

Cancel Send

In some printer models, this menu item can be conﬁgured only from the Embedded Web Server.

This menu item appears only in some printer models.

Describe the printer. The maximum length is 32 characters.

Identify the printer location. The maximum length is 63 characters.

Personalize the printer name. The maximum length is 63 characters.

Export conﬁguration ﬁles to a ﬂash drive.

Export compressed log ﬁles to a ﬂash drive.

Send diagnostic information to Lexmark.

Understanding the printer menus 56

Print

Layout

Menu item Description

Sides

1‑sided* 2‑sided

Flip Style

Long Edge* Short Edge

Blank Pages

Print Do Not Print*

Collate

O [1,1 ,1 , 2 , 2 , 2 ] * On [1,2,1,2,1,2]

Separator Sheets

None* Between Copies Between Jobs Between Pages

Separator Sheet Source

Tray [x ] ( 1* ) Multipurpose Feeder

Specify whether to print on one side or two sides of the paper.

Determine which side of the paper (long edge or short edge) is bound when performing two‑sided printing.

Note: Depending on the option selected, the printer automatically osets each printed information of the page to bind the job correctly.

Print blank pages that are included in a print job.

Keep the pages of a print job stacked in sequence, particularly when printing multiple copies of the job.

Insert blank separator sheets when printing.

Specify the paper source for the separator sheet.

Note: The multipurpose feeder is available only in some printer models.

Pages per Side

O* 2 pages per side 3 pages per side 4 pages per side 6 pages per side 9 pages per side 12 pages per side 16 pages per side

Pages per Side Ordering

Horizontal* Reverse Horizontal Vertical Reverse Vertical

Note: An asterisk (*) next to a value indicates the factory default setting.

Print multiple page images on one side of a sheet of paper.

Specify the positioning of multiple page images when using Pages per Side. Note: The positioning depends on the number of page images and their

page orientation.

Understanding the printer menus 57

Menu item Description

Pages per Side Orientation

Auto* Landscape Portrait

Pages per Side Border

None* Solid

Copies

1–9999 (1*)

Print Area

Normal* Fit to page Whole Page

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify the orientation of a multiple‑page document when using Pages per Side.

Print a border around each page image when using Pages per Side.

Specify the number of copies for each print job.

Set the printable area on a sheet of paper.

Setup

Menu item Description

Printer Language

PCL Emulation PS Emulation*

Set the printer language. Note: Setting a printer language default does not prevent a software

program from sending print jobs that use another printer language.

Job Waiting

O* On

Job Hold Timeout

0–255 (30*)

Printer Usage

Max Speed Max Yield*

Preserve print jobs requiring supplies so that jobs not requiring the missing supplies can print.

Note: This menu item appears only when a printer hard disk is installed.

Set the time in seconds that the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue.

Note: This menu item appears only when a printer hard disk is installed.

Determine how the color imaging unit operates during printing.

Notes:

• When set to Max Yield, the color imaging unit slows or stops while

printing groups of black-only pages.

• When set to Max Speed, the color imaging unit always runs while

printing, whether color or black pages are being printed.

Download Target

RAM* Disk

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify where to save all permanent resources, such as fonts and macros, that have been downloaded to the printer.

Note: This menu item appears only when a printer hard disk is installed.

Understanding the printer menus 58

Menu item Description

Resource Save

O* On

Determine what the printer does with downloaded resources, such as fonts and macros, when it receives a job that requires more than the available memory.

Notes:

• When set to O, the printer retains downloaded resources only until

memory is needed. Resources associated with the inactive printer language are deleted.

• When set to On, the printer preserves all the permanent

downloaded resources across all language switches. When necessary, the printer shows memory full messages instead of deleting permanent resources.

Print All Order

Alphabetical* Newest First Oldest First

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify the order in which held and conﬁdential jobs are printed when Print All is selected.

Note: This menu item appears only when a printer hard disk is installed.

Quality

Menu item Description

Print Mode

Black and White Color*

Print Resolution

4800 CQ* 1200 dpi

Toner Darkness

1 to 5 (4*)

Halftone

Normal* Detail

Color Saver

O* On

RGB Brightness

‑6 to 6 (0*)

RGB Contrast

0 to 5 (0*)

RGB Saturation

0 to 5 (0*)

Set the print mode.

Set the resolution for the printed output. Note: 4800 CQ provides high‑quality output at maximum speed.

Determine the lightness or darkness of text images.

Enhance the printed output to have smoother lines with sharper edges.

Reduce the amount of toner used to print graphics and images.

Adjust the brightness, contrast, and saturation for color output. Note: This setting does not aect ﬁles where CMYK color speciﬁcations are

used.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 59

Advanced Imaging

Menu item Description

Color Balance

Cyan

‑5 to 5 (0*)

Magenta

‑5 to 5 (0*)

Ye l l o w

‑5 to 5 (0*)

Black

‑5 to 5 (0*)

Reset Defaults

Color Correction

O Auto* Manual

Color Correction Content

Color Samples

Print Color Samples

Adjust the amount of toner that is used for each color.

Modify the color settings used to print documents.

Notes:

• O sets the printer to receive the color correction from the software.

• Auto sets the printer to apply dierent color proﬁles to each object on the

printed page.

• Manual allows the customization of the RGB or CMYK color conversions

applied to each object on the printed page.

• Color Correction Content is available only when Color Correction is set to

Manual.

Print sample pages for each of the RGB and CMYK color conversion tables used in the printer.

Color Adjust Calibrate the printer to adjust color variations in the printed output.

Spot Color Replacement

Set Custom CMYK

RGB Replacement Match the colors of the output with the original document.

Assign speciﬁc CMYK values to twenty named spot colors. Note: In some printer models, this menu item can be conﬁgured only from the

Embedded Web Server.

Notes:

• This menu item requires that you select the Display‑True ‑Black color table.

• This menu item appears only in the Embedded Web Server.

Note: An asterisk (*) next to a value indicates the factory default setting.

Job Accounting

Note: This menu appears only when a printer hard disk is installed.

Menu item Description

Job Accounting

O* On

Set the printer to create a log of the print jobs that it receives.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 60

Menu item Description

Accounting Log Frequency

Daily Weekly Monthly*

Log Action at End of Frequency

None* E‑mail Current Log E‑mail & Delete Current Log Post Current Log Post & Delete Current Log

Log Near Full Level

O* On

Log Action at Near Full

None* E‑mail Current Log E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post Current Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All But Current Delete All Logs

Specify how often the printer creates a log ﬁle.

Specify how the printer responds when the frequency threshold expires. Note: The value deﬁned in Accounting Log Frequency determines when this

action is triggered.

Specify the maximum size of the log ﬁle before the printer executes the Log Action at Near Full.

Specify how the printer responds when the hard disk is nearly full. Note: The value

is triggered.

deﬁned

in Log Near Full Level determines when this action

Log Action at Full

None* E‑mail & Delete Current Log E‑mail & Delete Oldest Log Post & Delete Current Log Post & Delete Oldest Log Delete Current Log Delete Oldest Log Delete All But Current Delete All Logs

URL to Post Log Specify where the printer posts job accounting logs.

E‑mail Address to Send Logs Specify the e‑mail address to which the printer sends job accounting logs.

Log File Preﬁx Specify the preﬁx for the log ﬁle name.

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify how the printer responds when disk usage reaches the maximum limit (100MB).

Note: The current host name default log ﬁle preﬁx.

deﬁned

in the TCP/IP menu is used as the

Understanding the printer menus 61

XPS

Menu item Description

Print Error Pages

O* On

Minimum Line Width

1–30 (2*)

Print a test page that contains information on errors, including XML markup errors.

Set the minimum stroke width.

Notes:

• Jobs printed in 1200 dpi use the value directly.

• Jobs printed in 4800 CQ use half the value.

Note: An asterisk (*) next to a value indicates the factory default setting.

PDF

Menu item Description

Scale to Fit

O* On

Annotations

Print Do Not Print*

Scale the page content to ﬁt the selected paper size.

Specify whether to print annotations in the PDF.

Note: An asterisk (*) next to a value indicates the factory default setting.

PostScript

Menu item Description

Print PS Error

O* On

Minimum Line Width

1–30 (2*)

Lock PS Startup Mode

O* On

Image Smoothing

O* On

Print a page that describes the PostScript® error. Note: When an error occurs, processing of the job stops, the printer

prints an error message, and the rest of the print job is

Set the minimum stroke width.

Notes:

• Jobs printed in 1200 dpi use the value directly.

• Jobs printed in 4800 CQ use half the value.

Disable the SysStart ﬁle.

Enhance the contrast and sharpness of low‑resolution images. Note: This setting has no eect on images with a resolution of 300 dpi or

higher.

ﬂushed.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 62

Menu item Description

Font Priority

Resident* Flash/Disk

Establish the font search order.

Notes:

• Resident sets the printer to search its memory for the requested font

before searching the ﬂash memory or printer hard disk.

• Flash/Disk sets the printer to search the ﬂash memory or printer hard

disk for the requested font before searching the printer memory.

• This menu item appears only when a ﬂash memory or printer hard

disk is installed.

Wait Timeout

O On* (40 seconds)

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the printer to wait for more data before canceling a print job.

PCL

Menu item Description

Font Source

Resident* Disk Flash All

Choose the source which contains the default font selection.

Notes:

• Flash and Disk appear only in some printer models.

• For Flash and Disk to appear, make sure that they are not read‑ or

write‑protected.

Font Name

[List of available fonts] (Courier*)

Symbol Set

[List of available symbol set] (10U PC‑8*)

Pitch

0.08–100 (10*)

Orientation

Portrait* Landscape

Note: An asterisk (*) next to a value indicates the factory default setting.

Select a font from the speciﬁed font source.

Specify the symbol set for each font name. Note: A symbol set is a set of alphabetic and numeric characters,

punctuation, and special symbols. Symbol sets support the languages or speciﬁc programs such as math symbols for scientiﬁc text.

Specify the pitch for ﬁxed or monospaced fonts. Note: Pitch refers to the number of

inch of type.

Specify the orientation of text and graphics on the page.

dierent

‑space characters in a horizontal

ﬁxed

Understanding the printer menus 63

Menu item Description

Lines per Page

1–255

PCL5 Minimum Line Width

1–30 (2*)

PCLXL Minimum Line Width

1–30 (2*)

A4 Width

198 mm* 203 mm

Auto CR after LF

O* On

Specify the number of lines of text for each page printed through the PCL® datastream.

Notes:

• This menu item activates vertical escapement that causes the

selected number of requested lines to print between the default margins of the page.

• 60 is the U.S. factory default setting. 64 is the international factory

default setting.

Set the initial minimum stroke width.

Notes:

• Jobs printed in 1200 dpi use the value directly.

• Jobs printed in 4800CQ use half the value.

Set the width of the logical page on A4‑size paper. Note: Logical page is the space on the physical page where data is

printed.

Set the printer to perform a carriage return after a line feed control command.

Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the ﬁrst position on the same line.

Auto LF after CR

O* On

Tra y Ren umber

Assign MP Feeder Assign Tray [x] Assign Manual Paper Assign Manual Envelope

Tra y Ren umber

View Factory Defaults

Tra y Ren umber

Restore Defaults

Print Timeout

O On* [90]

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the printer to perform a line feed after a carriage return control command.

Conﬁgure the printer to work with a dierent print driver or custom application that uses a dierent set of source assignments to request a given paper source.

Choose from the following options:

O*—The None—The paper source ignores the Select Paper Feed command. 0–199—Select a numeric value to assign a custom value to a paper

source.

Note: The multipurpose feeder is available only in some printer models.

Show the factory default value assigned for each paper source.

Restore the tray renumber values to their factory defaults.

Set the printer to end a print job after it has been idle for the speciﬁed amount of time in seconds.

printer uses the factory default paper source assignments.

Understanding the printer menus 64

HTML

Menu item Description

Font Name

[List of fonts] (Times*)

Font Size

1–255 (12*)

Scale

1–400% (100*)

Orientation

Portrait* Landscape

Margin Size

8–255 mm (19*)

Backgrounds

Do Not Print Print*

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the font to use for HTML documents.

Set the font size to use for HTML documents.

Scale HTML documents.

Set the page orientation for HTML documents.

Set the page margin for HTML documents.

Print background information or graphics for HTML documents.

Image

Menu item Description

Auto Fit

On O*

Invert

O* On

Scaling

Anchor Top Left Best Fit* Anchor Center Fit Height/Width Fit Height Fit Width

Orientation

Portrait* Landscape Reverse Portrait Reverse Landscape

Note: An asterisk (*) next to a value indicates the factory default setting.

Select the best available paper size and orientation setting for an image. Note: When set to On, this menu item overrides the scaling and orientation

settings for the image.

Invert bitonal monochrome images. Note: This menu item does not apply to GIF or JPEG image formats.

Adjust the image to ﬁt the printable area. Note: When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Specify the orientation of text and graphics on the page.

Understanding the printer menus 65

Paper

Tray Conﬁguration

Menu item Description

Default Source

Tray [x ] ( 1* ) Multipurpose Feeder Manual Paper Manual Envelope

Paper Size/Type

Tray [x ] Multipurpose Feeder Manual Paper Manual Envelope

Substitute Size

O Statement/A5 Letter/A4 All Listed*

Set the paper source for all print jobs. Note: The multipurpose feeder is available only in some printer models.

Specify the paper size or paper type loaded in each paper source. Note: The multipurpose feeder is available only in some printer models.

Set the printer to substitute a speciﬁed paper size if the requested size is not loaded in any paper source.

Notes:

prompts the user to load the required paper size.

•

O

• Statement/A5 prints an A5‑size document on statement when loading

statement, and statement‑size jobs on A5 paper size when loading A5.

• Letter/A4 prints an A4‑size document on letter when loading letter, and

letter‑size jobs on A4 paper size when loading A4.

• All Listed substitutes Letter/A4.

Note: An asterisk (*) next to a value indicates the factory default setting.

Media Conﬁguration

Universal Setup

Menu item Description

Units of Measure

Inches Millimeters

Portrait Width

3–14.17 inches (8.50*) 76–359.91 mm (216*)

Portrait Height

3–14.17 inches (14*) 76–359.91 mm (356*)

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify the unit of measurement for the universal paper. Note: Inches is the U.S. factory default setting. Millimeters is the

international factory default setting.

Set the portrait width of the universal paper.

Set the portrait height of the universal paper.

Understanding the printer menus 66

Menu item Description

Feed Direction

Short Edge* Long Edge

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the printer to pick paper from the short edge or long edge direction.

Note: Long Edge appears only when the longest edge is shorter than the maximum width supported.

Media Types

Menu item Description

Plain Card Stock Recycled Glossy Labels Vinyl Labels Bond Envelope Letterhead Preprinted Colored Paper Light Heavy Rough/Cotton Custom Type [x]

Specify the texture and weight of the paper loaded.

USB Drive

Note: This menu appears only in some printer models.

Flash Drive Print

Menu item Description

Number of Copies

1–9999 (1*)

Paper Source

Tray [x ] ( 1* ) Multipurpose Feeder Manual Paper Manual Envelope

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the number of copies.

Set the paper source for the print job. Note: The multipurpose feeder is available only in some printer models.

Understanding the printer menus 67

Menu item Description

Color

O On*

Collate

(1,1,1) (2,2,2) (1,2,3) (1,2,3)*

Sides

1‑Sided* 2‑Sided

Flip Style

Long Edge* Short Edge

Pages per Side

O* 2 pages per side 3 pages per side 4 pages per side 6 pages per side 9 pages per side 12 pages per side 16 pages per side

Print the output in color.

Print multiple copies in sequence.

Specify whether to print on one side or two sides of the paper.

Determine which side of the paper (long edge or short edge) is bound when performing two‑sided printing.

Note: Depending on the option selected, the printer automatically printed information of the page to bind the job correctly.

Print multiple page images on one side of a sheet of paper.

osets

each

Pages per Side Ordering

Horizontal* Reverse Horizontal Reverse Vertical Vertical

Pages per Side Orientation

Auto* Landscape Portrait

Pages per Side Border

None* Solid

Separator Sheets

O* Between Copies Between Jobs Between Pages

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify the positioning of multiple page images when using Pages per Side. Note: The positioning depends on the number of page images and their page

orientation.

Specify the orientation of a multiple‑page document when using Pages per Side.

Print a border around each page image when using Pages per Side.

Specify whether to insert blank separator sheets when printing.

Understanding the printer menus 68

Menu item Description

Separator Sheet Source

Tray [x ] ( 1* ) Multipurpose Feeder

Blank Pages

Do Not Print* Print

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify the paper source for the separator sheet. Note: The multipurpose feeder is available only in some printer models.

Specify whether to print blank pages in a print job.

Network/Ports

Network Overview

Menu item Description

Active Adapter

Auto* Standard Network

Network Status Show the connection status of the printer network.

Display Network Status on Printer

On* O

Specify how a network is connected.

Show the network status on the display.

Speed, Duplex Show the speed of the currently active network card.

IPv4 Show the IPv4 address.

All IPv6 Addresses Show all IPv6 addresses.

Reset Print Server Reset all active network connections to the printer.

Note: This setting removes all network conﬁguration settings.

Network Job Timeout

O On* (90 seconds)

Banner Page

O* On

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the time before the printer cancels a network print job.

Print a banner page.

Wireless

Note: This menu is available only in printers connected to a Wi‑Fi network or printers that have a wireless

network adapter.

Understanding the printer menus 69

Menu item Description

Setup Using Mobile App Conﬁgure the Wi‑Fi connection using Lexmark Mobile Assistant.

Setup On Printer Panel

Choose Network Add Wi‑Fi Network

Network Name Network Mode

Infrastructure

Wireless Security Mode

Disabled* WEP WPA2/WPA - Personal WPA2 - Personal

802.1x - RADIUS

Wi‑Fi Protected Setup

WPS Auto Detect

O

On* Start Push Button Method Start PIN Method

Conﬁgure the Wi‑Fi connection using the control panel. Note: 802.1x - RADIUS can be conﬁgured only from the Embedded

Web Server.

Establish a Wi‑Fi network and enable network security.

Notes:

• WPS Auto Detect appears only when the Wireless Security

Mode is set to WEP.

• Start Push-Button Method connects the printer to a Wi‑Fi

network when buttons on both the printer and the access point (wireless router) are pressed within a given time.

• Start PIN Method connects the printer to a Wi‑Fi network when

a PIN on the printer is entered into the wireless settings of the access point.

Network Mode

BSS Type

Infrastructure*

Enable Wi‑Fi Direct

On O*

Compatibility

802.11b/g/n (2.4GHz)*

802.11a/b/g/n/ac (2.4GHz/5GHz)

802.11a/n/ac (5GHz)

Wireless Security Mode

Disabled* WEP WPA2/WPA-Personal WPA2-Personal

802.1x - RADIUS

Specify the network mode.

Enable Wi-Fi Direct‑capable devices to connect directly to the printer.

Specify the standard for the Wi‑Fi network. Note: 802.11a/b/g/n/ac (2.4GHz/5GHz) and 802.11a/n/ac (5GHz) only

appear when a Wi‑Fi option is installed.

Set the security mode for connecting the printer to Wi‑Fi devices. Note: 802.1x - RADIUS can be conﬁgured only from the Embedded

Web Server.

Understanding the printer menus 70

Menu item Description

WEP Authentication Mode

Auto* Open Shared

Set WEP Key Specify a WEP password for secure Wi‑Fi connection.

WPA2/WPA Personal

AES

Set Pre‑Shared Key Set the password for secure Wi‑Fi connection.

WPA2-Personal

AES

802.1x Encryption Mode

WPA+ WPA2*

Set the type of Wireless Encryption Protocol (WEP) for the printer. Note: This menu item appears only when the Wireless Security

Mode is set to WEP.

Enable Wi‑Fi security through Wi-Fi Protected Access (WPA). Note: This menu item appears only when the Wireless Security

Mode is set to WPA2/WPA-Personal.

Enable Wi‑Fi security through WPA2. Note: This menu item appears only when the Wireless Security

Mode is set to WPA2-Personal.

Enable Wi‑Fi security through 802.1x standard.

Notes:

• This menu item appears only when the Wireless Security Mode

is set to 802.1x - RADIUS.

IPv4

Enable DHCP

On*

O Set Static IP Address

IP Address

Netmask

Gateway

• 802.1x - RADIUS can be

Web Server.

Enable and conﬁgure IPv4 settings in the printer.

conﬁgured

only from the Embedded

IPv6

Enable IPv6

On*

O Enable DHCPv6

O* Stateless Address Autoconﬁguration

On*

O DNS Server Address Manually Assigned IPv6 Address Manually Assigned IPv6 Router Address Preﬁx All IPv6 Addresses All IPv6 Router Addresses

Enable and conﬁgure IPv6 settings in the printer.

Understanding the printer menus 71

Menu item Description

Network Address

UAA LAA

PCL SmartSwitch

O On*

PS SmartSwitch

O On*

Job Buering

On O*

Mac Binary PS

Auto* On O

View the network addresses.

Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language.

Note: If PCL SmartSwitch is incoming data and uses the default printer language speciﬁed in the Setup menu.

Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language.

Note: If PS SmartSwitch is o, then the printer does not examine incoming data and uses the default printer language speciﬁed in the Setup menu.

Temporarily store print jobs in the printer hard disk before printing. Note: This menu item appears only when a hard disk is installed.

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

then the printer does not examine

o,

• On processes raw binary PostScript print jobs.

• O ﬁlters print jobs using the standard protocol.

Ethernet

Menu item Description

Network Speed Show the speed of an active network adapter.

IPv4

Enable DHCP

On*

O

IPv4

Set Static IP Address

IP Address

Netmask

Gateway

IPv6

Enable IPv6

O

On*

Note: An asterisk (*) next to a value indicates the factory default setting.

Enable Dynamic Host Conﬁguration Protocol (DHCP). Note: DHCP is a standard protocol that allows a server to dynamically

distribute IP addressing and conﬁguration information to clients.

Set the static IP address of your printer.

Enable IPv6 in the printer.

Understanding the printer menus 72

Menu item Description

IPv6

Enable DHCPv6

O*

IPv6

Stateless Address Autoconﬁguration

O

On*

IPv6

DNS Server Address

IPv6

Manually Assigned IPv6 Address

IPv6

Manually Assigned IPv6 Router

IPv6

Address Preﬁx

0–128 (64*)

Enable DHCPv6 in the printer.

Set the network adapter to accept the automatic IPv6 address conﬁguration entries provided by a router.

Specify the DNS server address.

Assign the IPv6 address.

Specify the address preﬁx.

IPv6

All IPv6 Addresses

IPv6

All IPv6 Router Addresses

Network Address

UAA LAA

PCL SmartSwitch

O On*

PS SmartSwitch

O On*

Job Buering

O On*

Show all IPv6 addresses.

Show all IPv6 router addresses.

Show the printer Media Access Control (MAC) addresses: Locally Administered Address (LAA) and Universally Administered Address (UAA).

Note: You can change the printer LAA manually.

Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language.

Note: If PCL SmartSwitch is data and uses the default printer language speciﬁed in the Setup menu.

Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language.

Note: If PS SmartSwitch is data and uses the default printer language speciﬁed in the Setup menu.

Temporarily store jobs on the printer hard disk before printing.

Notes:

then the printer does not examine incoming

o,

then the printer does not examine incoming

o,

• This menu item appears only when a hard disk is installed.

• This menu item appears only in some printer models.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 73

Menu item Description

Mac Binary PS

Auto* On O

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

• On processes raw binary PostScript print jobs.

• O ﬁlters print jobs using the standard protocol.

Energy Ecient Ethernet

O On*

Note: An asterisk (*) next to a value indicates the factory default setting.

Reduce power consumption when the printer does not receive data from the Ethernet network.

TCP/IP

Note: This menu appears only in network printers or printers attached to print servers.

Menu item Description

Set Hostname Set the current TCP/IP host name.

Domain Name Set the domain name.

Note: This menu item appears only in some printer models.

Allow DHCP/BOOTP to update NTP server

O On*

Allow the DHCP and BOOTP clients to update the NTP settings of the printer.

Zero Conﬁguration Name Specify a service name for the zero conﬁguration network.

Note: This menu item appears only in some printer models.

Enable Auto IP

O On*

DNS Server Address Specify the current Domain Name System (DNS) server address.

Backup DNS Server Address Specify the backup DNS server addresses.

Backup DNS Server Address 2

Backup DNS Server Address 3

Domain Search Order Specify a list of domain names to locate the printer and its resources that reside

Enable DDNS

O On*

Note: An asterisk (*) next to a value indicates the factory default setting.

Assign an IP address automatically.

in dierent domains on the network. Note: This menu item appears only in some printer models.

Update the Dynamic DNS settings.

Understanding the printer menus 74

Menu item Description

DDNS TTL Specify the current DDNS settings.

Default TTL

DDNS Refresh Time

Enable mDNS

O On*

WINS Server Address Specify a server address for Windows Internet Name Service (WINS).

Enable BOOTP

O* On

Restricted Server List Specify an IP address for the TCP connections.

Update multicast DNS settings.

Allow the BOOTP to assign a printer IP address.

Notes:

• Use a comma to separate each IP address.

• You can add up to 50 IP addresses.

Restricted Server List Options

Block All Ports* Block Printing Only Block Printing and HTTP Only

MTU Specify a maximum transmission unit (MTU) parameter for the TCP connections.

Raw Print Port

1–65535 (9100*)

Specify how the IP addresses in the list can access the printer functionality.

Specify a raw port number for printers connected on a network.

Outbound Trac Maximum Speed

O* On

Enhanced TLS Security

O* On

Note: An asterisk (*) next to a value indicates the factory default setting.

Enable the printer maximum transfer rate.

Enhance printer privacy and data integrity.

SNMP

Note: This menu appears only in network printers or printers that are attached to print servers.

Understanding the printer menus 75

Menu item Description

SNMP Versions 1 and 2c

Enabled

O

On* Allow SNMP Set

O

On* Enable PPM MIB

O

On* SNMP Community

SNMP Version 3

Enabled

O

On* Set Read/Write Credentials

User Name

Password Set Read‑only Credentials

User Name

Password Authentication Hash

MD5

SHA1* Minimum Authentication Level

No Authentication, No Privacy

Authentication, No Privacy

Authentication, Privacy* Privacy Algorithm

DES

AES‑128*

Conﬁgure Simple Network Management Protocol (SNMP) versions 1 and 2c to install print drivers and applications.

Conﬁgure SNMP version 3 to install and update the printer security.

Note: An asterisk (*) next to a value indicates the factory default setting.

IPSec

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item Description

Enable IPSec

O* On

Note: An asterisk (*) next to a value indicates the factory default setting.

Enable Internet Protocol Security (IPSec).

Understanding the printer menus 76

Menu item Description

Base Conﬁguration

Default* Compatibility Secure

IPSec Device Certiﬁcate Specify an IPSec certiﬁcate.

Pre‑Shared Key Authenticated Connections

Host [x]

Address

Key

Certiﬁcate Authenticated Connections

Host [x] Address[/subnet]

Address[/subnet]

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the IPSec base conﬁguration. Note: This menu item appears only when Enable IPSec is set to

On.

Note: This menu item appears only when Base Conﬁguration is set to Compatibility.

Conﬁgure the authenticated connections of the printer. Note: These menu items appear only when Enable IPSec is set to

On.

802.1x

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item Description

Active

O* On

Note: An asterisk (*) next to a value indicates the factory default setting.

LPD

Conﬁguration

Let the printer join networks that require authentication before allowing access.

Note: To Embedded Web Server.

conﬁgure

the settings of this menu item, access the

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item Description

LPD Timeout

0–65535 seconds (90*)

LPD Banner Page

O* On

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the time‑out value to stop the Line Printer Daemon (LPD) server from waiting indeﬁnitely for hung or invalid print jobs.

Print a banner page for all LPD print jobs. Note: A banner page is the

separator of print jobs and to identify the originator of the print job request.

page of a print job used as a

ﬁrst

Understanding the printer menus 77

Menu item Description

LPD Trailer Page

O* On

LPD Carriage Return Conversion

O* On

Note: An asterisk (*) next to a value indicates the factory default setting.

Print a trailer page for all LPD print jobs. Note: A trailer page is the last page of a print job.

Enable carriage return conversion. Note: Carriage return is a mechanism that commands the printer to

move the position of the cursor to the line.

position on the same

ﬁrst

HTTP/FTP Settings

Note: This menu appears only in network printers or printers attached to print servers.

Menu item Description

Enable HTTP Server

O On*

Enable HTTPS

O On*

Access the Embedded Web Server to monitor and manage the printer.

Conﬁgure the Hypertext Transfer Protocol Secure (HTTPS) settings.

Enable FTP/TFTP

O On*

Local Domains Specify domain names for HTTP and FTP servers.

HTTP Proxy IP Address Conﬁgure the HTTP and FTP server settings.

FTP Proxy IP Address

HTTP Default IP Port

1–65535 (80*)

HTTPS Device Certiﬁcate

FTP Default IP Port

1–65535 (21*)

Timeout for HTTP/FTP Requests

1–299 (30*)

Retries for HTTP/FTP Requests

1–299 (3*)

Note: An asterisk (*) next to a value indicates the factory default setting.

Send ﬁles using FTP.

Note: This menu item appears only in some printer models.

Note: These menu items appear only in some printer models.

Specify the amount of time before the server connection stops.

Set the number of retries to connect to the HTTP/FTP server.

Understanding the printer menus 78

ThinPrint

Menu item Description

Enable ThinPrint

O On*

Port Number

4000–4999 (4000*)

Bandwidth (bits/sec)

100–1000000 (0*)

Packet Size (kbytes)

0–64000 (0*)

Note: An asterisk (*) next to a value indicates the factory default setting.

Print using ThinPrint.

Set the port number for the ThinPrint server.

Set the speed to transmit data in a ThinPrint environment.

Set the packet size for data transmission.

USB

Note: This menu appears only in some printer models.

Menu item Description

PCL SmartSwitch

O On*

Set the printer to switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language.

Note: If PCL SmartSwitch is data and uses the default printer language speciﬁed in the Setup menu.

then the printer does not examine incoming

o,

PS SmartSwitch

O On*

Job Buering

O* On

Mac Binary PS

On Auto* O

Set the printer to switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language.

Note: If PS SmartSwitch is data and uses the default printer language speciﬁed in the Setup menu.

Temporarily store jobs on the printer hard disk before printing. Note: This menu item appears only when a hard disk installed.

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

then the printer does not examine incoming

o,

• When set to On, the printer processes raw binary PostScript print jobs

from computers using the Macintosh operating system.

• When set to Auto, the printer processes print jobs from computers using

either Windows or Macintosh operating systems

• When set to

protocol.

Enable USB Port

O On*

Note: An asterisk (*) next to a value indicates the factory default setting.

Enable the standard USB port.

the printer

O,

ﬁlters

PostScript print jobs using the standard

Understanding the printer menus 79

Google Cloud Print

Menu item Description

Registration

Options

Enable Google Cloud Print

O

On*

Options

Enable Local Discovery

O

On*

Options

Enable SSL Peer

O

On*

Options

Always Print As Image

O*

Note: An asterisk (*) next to a value indicates the factory default setting.

Veriﬁcation

Print directly from your Google account.

Allow the registered user and other users on the same subnet to send jobs to the printer locally.

Verify authenticity of the peer certiﬁcate to connect to your Google account.

Set the printer to process PDF ﬁles as an image for faster printing.

Wi‑Fi Direct

Note: This menu appears only when a direct Wi‑Fi network is the active network.

Menu item Description

SSID Specify the service set identiﬁer (SSID) of the Wi‑Fi network.

Set Preshared Key Set the preshared key (PSK) to authenticate and validate users on a Wi‑Fi

connection.

Show PSK on Setup Page

O On*

Group Owner IP Address Specify the IP address of the group owner.

Auto‑Accept Push Button Requests

O* On

Note: An asterisk (*) next to a value indicates the factory default setting.

Show the PSK on the Network Setup Page.

Accept requests to connect to the network automatically. Note: Accepting clients automatically is not secured.

Understanding the printer menus 80

Security

Note: In some printer models, this menu can be

Login Methods

Manage Permissions

Menu item Description

Function Access

Modify Address Book Create Manage Bookmarks Flash Drive Print Flash Drive Color Printing Held Jobs Access User Cancel Jobs at the Device Change Language Internet Printing Protocol (IPP) B/W Print Color Print

Proﬁles

Control access to the printer functions.

conﬁgured

only from the Embedded Web Server.

Administrative Menus

Security Menu Network/Ports Menu Paper Menu Reports Menu Function Supplies Menu Option Card Menu SE Menu Device Menu

Device Management

Remote Management Firmware Updates Apps Conﬁguration Operator Panel Lock Import / Export All Settings Out of Service Erase

Conﬁguration

Control access to the printer menus.

Menus

Control access to the printer management options.

Understanding the printer menus 81

Menu item Description

Apps

New Apps Slideshow Change Wallpaper Screen Saver Forms and Favorites Eco-Settings

Control access to the printer applications. Note: The list may vary depending on the applications that are enabled from

the Embedded Web Server.

Local Accounts

Menu item Description

Manage Groups/Permissions

Add Group

Import Access Controls

Function Access Administrative Menus Device Management Apps

All Users

Import Access Controls

Function Access Administrative Menus Device Management Apps

Admin

Control group or user access to the printer functions, applications, and security settings.

Add User

User Name/Password User Name Password PIN

User Name/Password Accounts

Add User

User Name Accounts

Add User

Password Accounts

Add User

PIN Accounts

Add User

Create local accounts to manage access to the printer functions.

Understanding the printer menus 82

Schedule USB Devices

Menu item Description

Schedules

Add New Schedule

Schedule access to the USB ports.

Security Audit Log

Menu item Description

Enable Audit

O* On

Enable Remote Syslog

O* On

Remote Syslog Server Specify the remote syslog server.

Remote Syslog Port

1–65535 (514*)

Remote Syslog Method

Normal UDP* Stunnel

Note: An asterisk (*) next to a value indicates the factory default setting.

Record the events in the secure audit log and remote syslog.

Send audit logs to a remote server.

Specify the remote syslog port.

Specify a syslog method to transmit logged events to a remote server.

Understanding the printer menus 83

Menu item Description

Remote Syslog Facility

0 ‑ Kernel Messages 1 ‑ User‑Level Messages 2 ‑ Mail System 3 ‑ System Daemons 4 ‑ Security/Authorization

Messages* 5 ‑ Messages Generated

Internally by Syslogs 6 ‑ Line Printer Subsystem 7 ‑ Network News Subsystem 8 ‑ UUCP Subsystem 9 ‑ Clock Daemon 10 ‑ Security/Authorization

Messages 11 ‑ FTP Daemon 12 ‑ NTP Subsystem 13 ‑ Log Audit 14 ‑ Log Alert 15 ‑ Clock Daemon 16 ‑ Local Use 0 (local0) 17‑ Local Use 1 (local1) 18 ‑ Local Use 2 (local2) 19 ‑ Local Use 3 (local3) 20 ‑ Local Use 4 (local4) 21 ‑ Local Use 5 (local5) 22 ‑ Local Use 6 (local6) 23 ‑ Local Use 7 (local7)

Specify a facility code that the printer uses when sending log events to a remote server.

Severity of Events to Log

0 ‑ Emergency 1 ‑ Alert 2 ‑ Critical 3 ‑ Error 4 ‑ Warning* 5 ‑ Notice 6 ‑ Informational 7 ‑ Debug

Remote Syslog Non‑Logged Events

O* On

Admin’s E‑mail Address Send e‑mail notiﬁcation of logged events to the administrator.

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify the priority level cuto for logging messages and events.

Send all events, regardless of severity level, to the remote server.

Understanding the printer menus 84

Menu item Description

E‑mail Log Cleared Alert

O* On

E‑mail Log Wrapped Alert

O* On

Log Full Behavior

Wrap Over Older Entries* E‑mail Log Then Delete All

Entries

E‑mail % Full Alert

O* On

% Full Alert Level

1–99 (90*)

E‑mail Log Exported Alert

O* On

E‑mail Log Settings Changed Alert

O* On

Send e‑mail notiﬁcation to the administrator when a log entry is deleted.

Send e‑mail notiﬁcation to the administrator when the log becomes full and begins to overwrite the oldest entries.

Resolve log storage issues when the log ﬁlls its allotted memory.

Send e‑mail notiﬁcation to the administrator when the log ﬁlls its allotted memory.

Send e‑mail notiﬁcation to the administrator when a log is exported.

Send e‑mail notiﬁcation to the administrator when Enable Audit is set.

Log Line Endings

LF (\n)* CR (\r) CRLF (\r\n)

Digitally Sign Exports

O* On

Clear Log Delete all audit logs.

Export Log

Syslog (RFC 5424) Syslog (RFC 3164) CSV

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify how the log ﬁle terminates the end of each line.

Add a digital signature to each exported log ﬁle.

Export a security log to a ﬂash drive.

Understanding the printer menus 85

Login Restrictions

Menu item Description

1–10 (3*)

Failure time frame

1–60 minutes (5*)

Lockout time

1–60 minutes (5*)

Web Login Timeout

1–120 minutes (10*)

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify the number of failed login attempts before the user gets locked out.

Specify the time frame between failed login attempts before the user gets locked out.

Specify the lockout duration.

Specify the delay for a remote login before the user is logged o automatically.

Conﬁdential Print Setup

Menu item Description

Max Invalid PIN

2–10

Set the number of times an invalid PIN can be entered.

Notes:

• A value of zero turns o this setting.

• When the limit is reached, the print jobs for that user name and PIN are

deleted.

Conﬁdential Job Expiration

O* 1 Hour 4 Hours 24 Hours 1 Week

Repeat Job Expiration

O* 1 Hour 4 Hours 24 Hours 1 Week

Verify Job Expiration

O* 1 Hour 4 Hours 24 Hours 1 Week

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the expiration time for conﬁdential print jobs.

Notes:

• If this menu item is changed while conﬁdential print jobs reside in the printer

memory or hard disk, then the expiration time for those print jobs does not change to the new default value.

• If the printer is turned o, then all conﬁdential jobs held in the printer memory

are deleted.

Set the expiration time for a print job that you want to repeat.

Set the expiration time that the printer prints a copy for the user to examine its quality, before printing the remaining copies.

Understanding the printer menus 86

Menu item Description

Reserve Job Expiration

O* 1 Hour 4 Hours 24 Hours 1 Week

Require All Jobs to be Held

O* On

Keep duplicate documents

O* On

Note: An asterisk (*) next to a value indicates the factory default setting.

Set the expiration time that the printer stores print jobs for printing later.

Set the printer to hold all print jobs.

Set the printer to print other documents with the same ﬁle name without overwriting any of the print jobs.

Disk Encryption

Note: This menu appears only when a printer hard disk is installed.

Menu item Description

Status

Enabled Disabled

Determine whether Disk Encryption is enabled.

Start encryption Prevent the loss of sensitive data in case the printer or its hard disk is stolen.

Note: Enabling disk encryption erases all contents in the hard disk. If necessary, back up

important data from the printer before starting the encryption.

Erase Temporary Data Files

Menu item Description

Stored in onboard memory

O* On

Stored on hard disk

1 Pass Erase* 3 Pass Erase 7 Pass Erase

Note: An asterisk (*) next to a value indicates the factory default setting.

Delete all ﬁles stored on the printer memory.

Delete all ﬁles stored on the printer hard disk.

Understanding the printer menus 87

Solutions LDAP Settings

Use To

Follow LDAP Referrals

O* On

LDAP Certiﬁcate Veriﬁcation

No* Ye s

Search the dierent servers in the domain for the logged-in user account.

Enable veriﬁcation of LDAP certiﬁcates.

Mobile Services Management

Use To

AirPrint

O

On*

Enable AirPrint printing.

Miscellaneous

Menu item Description

Protected Features

Show* Hide

Show all the features that Function Access Control (FAC) protects regardless of the security permission that the user has.

Note: FAC manages access to speciﬁc menus and functions or disables them entirely.

Print Permission

O* On

Default Print Permission Login Set the default login for Print Permission.

Security Reset Jumper

Enable “Guest” access* No

Eect

Let the user log in before printing.

Specify the eect of using the security reset jumper.

Notes:

• The jumper is located beside a lock icon on the controller board.

• Enable “Guest” access provides full access control to users who are not

logged in.

• No Eect means that the reset has no eect on the printer security

conﬁguration.

Minimum Password Length

0–32 (0*)

Note: An asterisk (*) next to a value indicates the factory default setting.

Specify the minimum characters that are allowed for a password.

Understanding the printer menus 88

Reports

Menu Settings Page

Menu item Description

Menu Settings Page Print a report that contains the printer preferences, settings, and conﬁgurations.

Device

Menu item Description

Device Information Print a report that contains information about the printer.

Device Statistics Print a report about printer usage and supply status.

Proﬁle List Print a list of proﬁles that are stored in the printer.

Asset Report Print a report that contains the printer serial number and model name.

Print

Menu item Description

Print Fonts

PCL Fonts PS Fonts

Print Directory Print the resources that are stored in the ﬂash drive or printer hard disk.

Print samples and information about the fonts that are available in each printer language.

Note: This menu item appears only when a installed.

drive or printer hard disk is

ﬂash

Network

Menu item Description

Network Setup Page Print a page that shows the conﬁgured network and wireless settings on the

printer. Note: This menu item appears only in network printers or printers connected

to print servers.

Help

Note: This menu appears only in some printer models.

Menu item Description

Print All Guides Prints all the guides

Media Guide Provides information about loading paper and specialty media

Print Quality Guide Provides information about solving print quality issues

Understanding the printer menus 89

Menu item Description

Color Quality Guide Provides information about color print quality settings

Information Guide Provides more information sources about the printer

Connection Guide Provides information about connecting the printer locally (USB) or to a

network

Moving Guide Provides information about moving, locating, or shipping the printer

Supplies Guide Provides information about ordering supplies

Troubleshooting

Menu item Description

Print Quality Test Pages Print sample pages to identify and correct print quality defects.

Printing the Menu Settings Page

From the control panel, navigate to:

Settings > Reports > Menu Settings Page

For non‑touch‑screen printer models, press

to navigate through the settings.

Securing the printer 90

Securing the printer

Note: The hard disk is supported only in some printer models.

Locating the security slot

The printer is equipped with a security lock feature. Attach a security lock compatible with most laptop computers in the location shown to secure the printer in place.

Erasing printer memory

To erase volatile memory or buered data in your printer, turn o the printer.

To e ra se no n‑volatile memory or individual settings, device and network settings, security settings, and embedded solutions, do the following:

1 From the control panel, navigate to:

Settings > Device > Maintenance > Out of Service Erase > Sanitize all information on nonvolatile memory

For non-touch-screen printer models, press

2 Depending on your printer model, select ERASE or Continue.

3 Follow the instructions on the display.

to navigate through the settings.

Erasing printer hard disk memory

1 From the home screen, touch Settings > Device > Maintenance > Out of Service Erase.

2 Select the Sanitize all information on hard disk check box, and then touch ERASE.

3 Follow the instructions on the display.

Note: This process can take from several minutes to more than an hour, making the printer unavailable

for other tasks.

Securing the printer 91

Encrypting the printer hard disk

This process erases all contents in the hard disk. If necessary, back up important data from the printer before starting the encryption.

1 From the home screen, touch Settings > Security > Disk Encryption > Start encryption.

2 Follow the instructions on the display.

Notes:

• To avoid loss of data, do not turn o the printer during the encryption process.

• This process can take from several minutes to more than an hour, making the printer unavailable for

other tasks.

• After encryption, the printer automatically restarts.

Restoring factory default settings

1 From the control panel, navigate to:

Settings > Device > Restore Factory Defaults

For non-touch-screen printer models, press

to navigate through the settings.

2 In the Restore Settings menu, select the settings that you want to restore.

3 Select RESTORE.

4 Follow the instructions on the display.

Statement of Volatility

Type of memory Description

Volatile memory The printer uses standard random access memory (RAM)

to buer temporarily user data during simple print and copy jobs.

Non-volatile memory The printer may use two forms of non-volatile memory:

EEPROM and NAND (ﬂash memory). Both types are used to store the operating system, printer settings, network information, scanner and bookmark settings, and embedded solutions.

Hard disk memory Some printers may have a hard disk drive installed. The

printer hard disk is designed for printer-speciﬁc functionality. The hard disk lets the printer retain buered user data from complex print jobs, form data, and font data.

Erase the content of any installed printer memory in the following circumstances:

• The printer is decommissioned.

• The printer hard disk is replaced.

• The printer is moved to a dierent department or location.

Securing the printer 92

• The printer is serviced by someone from outside your organization.

• The printer is removed from your premises for service.

• The printer is sold to another organization.

Disposing of a printer hard disk

• Degaussing—Flushes the hard disk with a magnetic ﬁeld that erases stored data

• Crushing—Physically compresses the hard disk to break component parts and render them unreadable

• Milling—Physically shreds the hard disk into small metal bits

Note: To guarantee that all data are completely erased, destroy physically each hard disk where data is stored.

Maintaining the printer 93

Maintaining the printer

Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and

supplies, may cause damage to your printer.

Networking

Connecting the printer to a Wi‑Fi network

1 From the printer control panel, navigate to:

Settings > Network/Ports > Wireless

For non-touch-screen printer models, press

2 Select Setup On Printer Panel and then follow the instructions on the display.

Note: For Wi‑Fi‑network‑ready printer models, a prompt for Wi‑Fi network setup appears during initial setup.

to navigate through the settings.

Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS)

Before you begin, make sure that:

• The access point (wireless router) is WPS‑

documentation that came with your access point.

• A wireless network adapter is installed in your printer. For more information, see the instructions that came

with the adapter.

Using the Push Button method

From the control panel, navigate to:

Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start Push Button Method

For non-touch-screen printer models, press

2 Follow the instructions on the display.

certiﬁed

or WPS‑compatible. For more information, see the

to navigate through the settings.

Using the personal identiﬁcation number (PIN) method

From the control panel, navigate to: Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start PIN Method

For non-touch-screen printer models, press

2 Copy the eight‑digit WPS PIN.

3 Open a Web browser, and then type the IP address of your access point in the address

to navigate through the settings.

ﬁeld.

Maintaining the printer 94

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

4 Access the WPS settings. For more information, see the documentation that came with your access

point.

5 Enter the eight‑digit PIN, and then save the changes.

Deactivating the Wi‑Fi network

1 From the printer control panel, navigate to:

Settings > Network/Ports > Network Overview > Active Adapter > Standard Networking

For non-touch-screen printer models, press

to navigate through the settings.

2 Follow the instructions on the display.

Cleaning the printer

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the

printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.

Notes:

• Perform this task after every few months.

• Damage to the printer caused by improper handling is not covered by the printer warranty.

1 Tur n

2 Remove paper from the standard bin and multipurpose feeder.

3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4 Wipe the outside of the printer with a damp, soft, lint‑free cloth.

Notes:

the printer, and then unplug the power cord from the electrical outlet.

o

• Do not use household cleaners or detergents, as they may damage the ﬁnish of the printer.

• Make sure that all areas of the printer are dry after cleaning.

5 Connect the power cord to the electrical outlet, and then turn on the printer.

CAUTION—POTENTIAL INJURY: To avoid the risk of

to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

or electrical shock, connect the power cord

ﬁre

Maintaining the printer 95

Ordering parts and supplies

To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized dealers in your area. In other countries or regions, go to where you purchased the printer.

Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.

Checking the status of parts and supplies

1 From the control panel, navigate to:

Settings > Reports > Device > Device Statistics

www.lexmark.com or contact the place

For non‑touch‑screen printer models, press

to navigate through the settings.

2 From the Supply Information section of the pages printed, check the status of parts and supplies.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark parts and supplies. Use of third-party supplies or parts may aect the performance, reliability, or life of the printer and its imaging components. It can also aect warranty coverage. Damage caused by the use of third-party parts and supplies is not covered by the warranty. All life indicators are designed to function with Lexmark parts and supplies, and may deliver unpredictable results if third-party parts and supplies are used. Imaging component usage beyond the intended life may damage your Lexmark printer or its associated components.

Ordering a toner cartridge

Notes:

• The estimated cartridge yield is based on the ISO/IEC 19798 standard.

• Extremely low print coverage for extended periods of time may negatively aect actual yield.

CS421, CS521, and CS622 Return Program toner cartridges

Item United States

and Canada

European Economic

Area

Rest of Asia

Paciﬁc

Latin America Rest of

Europe,

Middle East,

and Africa

Australia and New Zealand

Return Program toner cartridges

Cyan 78C10C0 78C20C0 78C30C0 78C40C0 78C50C0 78C60C0

Magenta 78C10M0 78C20M0 78C30M0 78C40M0 78C50M0 78C60M0

Yellow 78C10Y0 78C20Y0 78C30Y0 78C40Y0 78C50Y0 78C60Y0

Black 78C10K0 78C20K0 78C30K0 78C40K0 78C50K0 78C60K0

Extra high yield Return Program toner cartridges

These toner cartridges are supported only in CS521 and CS622 printer models.

For more information on countries located in each region, go to

www.lexmark.com/regions.

Maintaining the printer 96

Item United States

and Canada

European Economic

Area

Rest of Asia

Paciﬁc

Latin America Rest of

Europe,

Middle East,

Australia and New Zealand

and Africa

Cyan 78C1XC0 78C2XC0 78C3XC0 78C4XC0 78C5XC0 78C6XC0

Magenta 78C1XM0 78C2XM0 78C3XM0 78C4XM0 78C5XM0 78C6XM0

Yellow 78C1XY0 78C2XY0 78C3XY0 78C4XY0 78C5XY0 78C6XY0

Black 78C1XK0 78C2XK0 78C3XK0 78C4XK0 78C5XK0 78C6XK0

Ultra high yield Return Program toner cartridges

Cyan 78C1UC0 78C2UC0 78C3UC0 78C4UC0 78C5UC0 78C6UC0

Magenta 78C1UM0 78C2UM0 78C3UM0 78C4UM0 78C5UM0 78C6UM0

Yellow 78C1UY0 78C2UY0 78C3UY0 78C4UY0 78C5UY0 78C6UY0

Black 78C1UK0 78C2UK0 78C3UK0 78C4UK0 78C5UK0 78C6UK0

These toner cartridges are supported only in CS521 and CS622 printer models.

For more information on countries located in each region, go to

www.lexmark.com/regions.

CS421, CS521, and CS622 Regular toner cartridges

Item Part number

Extra high yield toner cartridges

Cyan 78C0X20

Magenta 78C0X30

Yellow 78C0X40

Black 78C0X10

Ultra high yield toner cartridges

Cyan 78C0U20

Magenta 78C0U30

Yellow 78C0U40

Black 78C0U10

These toner cartridges are supported only in the CS421 printer model.

These toner cartridges are supported only in the CS521 and CS622 printer models.

Maintaining the printer 97

C2325, C2425, and C2535 Return Program toner cartridges

Item United States

and Canada

European Economic

Area

Rest of Asia

Paciﬁc

Latin America

Distribution

Rest of

Europe,

Middle East,

Australia and New Zealand

and Africa

Return Program toner cartridges

Cyan C2310C0 C2320C0 C2330C0 C2340C0 C2350C0 C2360C0

Magenta C2310M0 C2320M0 C2330M0 C2340M0 C2350M0 C2360M0

Yellow C2310Y0 C2320Y0 C2330Y0 C2340Y0 C2350Y0 C2360Y0

Black C2310K0 C2320K0 C2330K0 C2340K0 C2350K0 C2360K0

High yield Return Program toner cartridges

Cyan C231HC0 C232HC0 C233HC0 C234HC0 C235HC0 C236HC0

Magenta C231HM0 C232HM0 C233HM0 C234HM0 C235HM0 C236HM0

Yellow C231HY0 C232HY0 C233HY0 C234HY0 C235HY0 C236HY0

Black C231HK0 C232HK0 C233HK0 C234HK0 C235HK0 C236HK0

Extra high yield Return Program toner cartridges

Cyan C241XC0 C242XC0 C243XC0 C244XC0 C245XC0 C246XC0

Magenta C241XM0 C242XM0 C243XM0 C244XM0 C245XM0 C246XM0

Yellow C241XY0 C242XY0 C243XY0 C244XY0 C245XY0 C246XY0

Black C241XK0 C242XK0 C243XK0 C244XK0 C245XK0 C246XK0

Ultra high yield Return Program toner cartridge

Black C251UK0 C252UK0 C253UK0 C254UK0 C255UK0 C256UK0

These toner cartridges are supported only in C2425 and C2535 printer models.

This toner cartridge is supported only in the C2535 printer model.

For more information on countries located in each region, go to

www.lexmark.com/regions.

C2325, C2425, and C2535 Regular toner cartridges

Item Part number

High yield toner cartridges

Cyan C230H20

Magenta C230H30

Yellow C230H40

Black C230H10

These toner cartridges are supported only in the C2325 printer model.

This toner cartridge is supported only in C2425 and C2535 printer models.

This toner cartridge is supported only in the C2425 printer model.

This toner cartridge is supported only in the C2535 printer model.

Maintaining the printer 98

Item Part number

Extra high yield toner cartridges

Cyan

Magenta

Yellow

Black

Ultra high yield toner cartridge

C240X20

C240X30

C240X40

C240X10

Black C250U10

These toner cartridges are supported only in the C2325 printer model.

This toner cartridge is supported only in C2425 and C2535 printer models.

This toner cartridge is supported only in the C2425 printer model.

This toner cartridge is supported only in the C2535 printer model.

C2240 Regular toner cartridges

Item United States,

Canada, Australia,

Europe, Middle East,

and Africa

Rest of Asia Paciﬁc Latin America

Distribution

and New Zealand

Cyan 24B7158 24B7182 24B7206 24B7234

Magenta 24B7159 24B7183 24B7207 24B7235

Yellow 24B7160 24B7184 24B7208 24B7236

Black 24B7161 24B7185 24B7209 24B7237

Ordering an imaging kit

Item Part number

Return Program imaging kit

Black Return Program imaging kit 78C0ZK0

Black and color Return Program imaging kit 78C0ZV0

Regular imaging kit

Black imaging kit 78C0Z10

Black and color imaging kit 78C0Z50

Ordering a waste toner bottle

Item Part number

Waste toner bottle 78C0W00

Maintaining the printer 99

Ordering a maintenance kit

Match the maintenance kit to the printer voltage.

Notes:

• Using certain types of paper may require more frequent replacement of the maintenance kit.

• The maintenance kit includes a fuser and pick tires. These parts may be individually ordered and

replaced if necessary.

Item Part number

100 V fuser maintenance kit 41X2095

110 V fuser maintenance kit 41X2096

220 V fuser maintenance kit 41X2097

Note: Only an authorized service technician can replace the maintenance kit. Contact your service provider.

Conﬁguring

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

• If you are using a proxy server, then temporarily disable it to load the web page correctly.

2 Click Settings > Device > Notiﬁcations.

3 From the Supplies menu, click Custom Supply Notiﬁcations.

4 Select a notiﬁcation for each supply item.

5 Apply the changes.

supply

notiﬁcations

Replacing parts and supplies

Replacing a toner cartridge

1 Open door B.

Warning—Potential Damage: To prevent damage from electrostatic discharge, touch any exposed metal

frame of the printer before accessing or touching interior areas of the printer.

Maintaining the printer 100

2 Remove the used toner cartridge.

3 Unpack the new toner cartridge.

Lexmark 42C0043 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

Safety information

Conventions

Product statements

Learning about the printer

Finding information about the printer

Selecting a location for the printer

Attaching cables

Using the control panel

Lexmark C2325

Lexmark CS421, Lexmark CS521, Lexmark C2425, and Lexmark C2535

Lexmark CS622 and Lexmark C2240

Understanding the status of the power button and indicator light

Setting up and using the home screen applications

Using the home screen

Customizing the home screen

Using Display Customization

Setting up Device Quotas

Using QR Code Generator

Using Customer Support

Managing bookmarks

Creating bookmarks

Creating folders

Managing contacts

Adding contacts

Adding groups

Editing contacts or groups

Deleting contacts or groups

Setting up and using the accessibility features

Activating Voice Guidance

Navigating the screen using gestures

Adjusting the Voice Guidance speech rate

Using the keyboard on the display

Loading paper and specialty media

Setting the paper size and type

Loading trays

Loading the multipurpose feeder

Loading the manual feeder

Linking trays

Paper support

Supported paper sizes

Supported paper types

Supported paper weights

Printing

Printing from a computer

Printing from a mobile device

Printing from a mobile device using Lexmark Mobile Print

Printing from a mobile device using Google Cloud Print

Printing from a mobile device using Mopria Print Service

Printing from a mobile device using AirPrint

Printing a font sample list

Printing a directory list

Understanding the printer menus

Menu map

Device

Preferences

Remote Operator Panel

Power Management

Information Sent to Lexmark

Accessibility

Restore Factory Defaults

Maintenance

Out of Service Erase

Visible Home Screen Icons

About this Printer

Print

Layout

Setup

Quality

Job Accounting

PostScript

HTML

Image

Paper

Universal Setup

Media Types