Lexibook SM1300 User Manual

Copyright © Lexibook 2004

1

Congratulations on your purchase of this weather station, MeteoClock SM1300. Please take the time to read
and understand this manual so you can begin to enjoy the convenience and features this product has to offer.

What exactly is a W

eather Station?

Lexibook digital stations measure not only the time in progress - thanks to their built-in clock - but also the actual
weather!

The MeteoClock SM1300 incorporates different functions:

- Thermometer:
Temperature is displayed in real time to the nearest tenth of a degree Celsius. Thanks to its wireless sensor,
the station can sense from a distance the outside temperature or that of another room!

- Hygrometer:
Outdoor or indoor hygrometry is expressed in percentage of humidity in the ambient air. The ideal “Comfort”
Zone for the human body ranges from 35 to 65% hygrometry for a given temperature in between 18 and 24ºC.

INTRODUCTION

Wireless Weather Station

SM1300 + ASM20 - Owners manual

SM1300GB 7/8/04 5:30 PM Page 1

Copyright © Lexibook 2004

3

Copyright © Lexibook 2004

2

FEATURES

Main Display Unit SM1300:

" dual clock and dual alarm
" calendar (day/month/year)
" local temperature and humidity display
" receives and displays temperature and

humidity from up to 4 remote transmitters
via RF technology of 433MHz

" maximum/minimum temperature records
" temperature and humidity trend indicator
" weather report symbols
" moon phase symbols
" LED Backlight
" user-selectable °C or °F
" battery type: 2 x AAsize

Remote Sensor ASM20:

" drip-proof design with LCD
" temperature display in user-selectable

°C or °F

" humidity display
" transmission range: up to 40 meters in open

area

" battery type: 2 x AA

Button placement

MODE/SNOOZE: scrolls through Clock 1 & 2, Alarm 1 & 2, Date & Year,

and Temperature Alarm (high & low) mode; snooze for alarm.
HOUR/+/MAX: shows maximum temperature; adjusts clock, alarm, date &
year and temperature alarm values.

MINUTE/-/MIN: shows minimum temperature; adjusts clock, alarm, date &
year and temperature alarm values.
ALARM/ °C/°F: toggles between C and F, 12 and 24 hour format, Alarm
1 & 2 on and off; disables (resets) high & low temperature alarms

CHN: scrolls through remote channels (1 to 4); scrolls through
local and remote channels (1 to 4) in (high & low) temperature
alarm mode.
LCD display.

SET: enter to House code and Channel setting mode.
°C/°F: hange between °C or °F, change channel and house

code.
Battery compartment.
LCD display.
Wall Mount Holder & Table Stand.

GETTING STARTED

SM1300GB 7/8/04 5:30 PM Page 2

Battery installation

remove battery cover
2 AAsize batteries (SM1300)
2 AAsize batteries (ASM20)
Insert between terminals observing proper polarity then replace cover

LOW BATTER

Y INDICATION:

Low battery indication will be indicated (for both

indoor & outdoor). On transmitter, will be displayed.

Setting remote transmitters

Insert batteries to start setup
HOUSE CODE will flash for 8 seconds
Select HOUSE CODE (1-15) by pressing °C/°F and then press SET
Transmitters for each receiver must be set to the same HOUSE CODE and
pressing SET
CHANNEL will flash for 8 seconds
Select CHANNEL(1-4) by pressing °C/°F and then press SET
Humidity & Temperature will display
Select °C or °F of Temperature by pressing °C/°F key

* Use a different house code if your weather station detecTs other signals from

neighboring sources

* Factory default: house code = 01 and channel = 01

GETTING STARTED

Copyright © Lexibook 2004

5

Copyright © Lexibook 2004

4

SYNCHRONIZATION
Automatic Learn Function

Learn function executes automatically and runs for approximately 3 minutes when batteries are
first installed in the receiver.

Within these 3 minutes, receiver picks up the temperature & humidity signals from remote
transmitter and displays the readings.

Manual-Learn (Searching for Remote Signals)

If a new remote transmitter is added or if signal is lost (outdoor display blinking), learn function must
be executed again.

Press and hold CHN for 3 seconds to start
Beep sound indicates that learn function has started
'Channel' symbol will flash and unit will beep as each remote
transmitter is detected
Temperature & humidity readings of remote transmitter display
on the receiver.

SETUP

SM1300GB 7/8/04 5:30 PM Page 4