LevelOne WBR-6603 Quick Install Guide
LevelOne
WBR-6603
150Mbps Wireless ADSL2+ Modem Router
Quick Installation Guide
English Português
Deutsch
Español Русский
1
繁體中文
Table of Contents
English........................................................................................... 5
Deutsch ......................................................................................... 8
Español ....................................................................................... 11
Português .................................................................................... 15
繁體中文 ...................................................................................... 18
Русский ....................................................................................... 21
Default Settings
IP Address 192.168.1.1
Password admin
Wireless Mode Enable
Wireless SSID LevelOne
Security None
This guide covers only the most common situations. All detailed
information is described in the user manual.
2
Figure 1-1
Figure 1-2
3
Figure 2-1
Figure 2-2
Figure 2-3
4
English
Package Contents
• WBR-6603
• Power Adapter
• RJ-11 ADSL Cable
• RJ-45 LAN Ethernet Cable
• CD-ROM with Manual and Utility
• Quick Installation Guide
If any of the above items are missing, please contact your retailer
or distributor.
Before you begin, please have your ISP’s username and
password details ready.
5
Check Your Network Settings
1. Please make sure your PC can get IP address automatically
so the WBR-6603 can communicate with your PC during
configuration.
• Select “Control Panel” > “Network Connections”.
• Right click the “Local Area Connection” and choose
“Properties”.
• Select the TCP/IP protocol for your network card.
• Click on the Properties button. You should then see the
following screen and make sure you have selected
“Obtain IP address automatically”
1.
3.
2.
4.
5.
2. Reboot computer to make sure you have received the IP
address correctly from the Router.
6
Installation
1.
Connect your ADSL activated Telephone line to WBR-6603’s
RJ11 port. (Figure 1-1)
2.
Connect the Computer LAN cable. (Figure 1-1)
3.
Plug in the Power Adapter. (Figure 1-1)
4.
Wait until the Status light is blinking steadily.
This means the router is ready for use. (Figure 1-2)
5.
Installation is now complete. You can now begin to set up the
device.
Setup
1. Start your WEB browser (Internet Explorer recommended).
In the Address box, enter the address: http://192.168.1.1
(Figure 2-1)
2. When prompted, use the password “admin”. (Figure 2-2)
3. The first time you connect to the WBR-6603, you should run
the Setup Wizard to configure the Internet Connection.
(Figure 2-3)
Select Wizard and click Enter.
4. This wizard will guide you through the setup in 5 easy steps.
Note: For effective wireless security, LevelOne recommends
WPA2 encryption methods.
7
Deutsch
Lieferumfang
• WBR-6603
• Netzteil
• RJ-11-ADSL Kabel
• RJ-45-Kabel (LAN/Ethernet)
• CD mit Anleitung und Dienstprogramm
• Kurzinstallationsanleitung
Falls etwas fehlen sollte, wenden Sie sich bitte an Ihren Händler
oder Distributor.
Bevor Sie beginnen, halten Sie bitte Benutzername und Kennwort
bereit – beides erhalten Sie von Ihrem Internetanbieter.
8
Loading...