Safety Switch for guarding the sliding door on a pick-and-place machine
The S20 is a Safety Switch without guard
interlocking, which can always be used
when the dangerous movement has
stopped before the entering person can
reach the point of operation. This is the
case, for example, with machines and systems where the operator is protected from
the point of operation with cages/grids or
sliding doors, and a process or production
interruption is essentially possible and may
be required. The S20 series Safety
Switches have a housing made of fiberglass-reinforced plastic in accordance with
protection rating IP 67. The models
equipped with various contact sets enable
integration in control circuits up to category
4 in accordance with EN ISO 13849. The
swivel deflecting head and numerous actuators enable universal use of this Safety
Switch.
Typical areas of application
Monitoring of rotating, swiveling or
z
sliding protective doors in "normal
duty" applications
Number of cable entries 1, 3
Type of cable entriesM20x1.5
Functions
Interlock device without guard interlocking in accordance with EN 1088
Integration in control circuits up to category 4 in accordance with EN ISO 13849
Special features
Contact sets for integration up to category 4 in accordance with
z
EN ISO 13849
Features
z Easy mounting with standard construction
z Universal use with 5 actuator starting directions
z 8 different actuators for different installation conditions and applica-
tions
z Self-centering with funnel-shaped entry opening
z Protective insulation, tough non-flammable plastic
Switch typeInterlock device without guard interlocking in accordance with EN 1088
Service life (TM ) in accordance with
EN ISO 13849-1
Number of cycles until 10 % of the compo-
nents have a failure to danger (B
Ambient temperature, operation-25...+80° C
Dirt levels, external, in accordance with
EN 60947-1
Housing materialFiberglass-reinforced, thermo-plastic plastic, self-extinguishing
External actuatorAC-ANxx series: Straight, angled, resilient, alignable
DimensionsSee dimensional drawing
Protection ratingIP 67
Contact protectionProtective insulation O
Approach actuation directions1 x above, 4 x lateral (90°)
Mechanical life time in accordance with
IEC 6047-5-1
Actuation frequency according to
IEC 6047-5-1
Approach speedMax. 0.5 m/s
Actuation force (pull-out)10 N
Actuating path with forced separation
Recoil tolerance4.5 mm
Contact equipment
Switching principleCreep contact
Contact openingForce-fit
Contact materialSilver alloy
Usage category in accordance with
EN 60947-5-1
Rated insulation voltage500 V AC, 600 V DC
Conventional thermal currentMax. 2 A
Short-circuit protection in accordance with
IEC60269-1
Connection system
10d
)
20 years
2,000,000
3
1x106 actuation clearance
Max. 3,600
Min. 9.0 mm
Min. 7.2 mm
Min. 7.8 mm
2NC
1NC + 1NO
2NC + 1NO
AC 15: Ue / Ie: 250 V / 6 A, 400 V / 4 A, 500 V / 1 A
DC 13: Ue / Ie: 24 V / 6 A, 125 V / 1.1 A, 250 V / 0.4 A
500 V, 10 A, type aM
Number of cable entries
Type of cable entriesM20x1.5
Cable cross-section (wire)1 x 0.5 mm² to 2 x 2.5 mm²
63000843 AC-A-M20-12NPTAdapter M20 x 1.5 on 1/2 NPT
63000844 AC-PLP-8Built-in plug M12, plastic, with internal 8-pin connection cable
Article list for S20 accessories
Article
AC Accessories
-AN
-S
-A
-F2
-F4
J2
-SL
-AL
-ASH
-PLP-8
AC
Description
Actuator, Normal Duty
Straight
Angled
Flexible in 2 directions
Flexible in 4 directions
Alignable in 2 directions
Straight and long
Angled and long
Angled and short
Built-in plug, 8-pin, plastic