Leuze BPS 8 TECHNICAL DESCRIPTION

Barcode tape 0 m to 10000 m for BPS 8 barcode positioning system

Usage note:

Each file contains all code information for a section of tape that is 500 metres long.

0.9 metres of barcode tape is provided on each A4 sheet. The 0.9 metres are divided into 5 lines of
18cm each, with 6 code information segments of 3cm each.

Important note for printing:

1: Select only those pages that are actually required.
2: Change the printer settings so that the code is not distorted. Suggestion for printer settings,
see figure 1.
3: Verify the printing result by measuring the distance between two codes (see figure 2).
4: Cut the code strips and concatenate them. It is important that the code content always
increases or decreases in blocks of 3cm.

Figure 1

Figure 2